Thesis (M.Eng. (Computer Enginnering)) -- University of Pretoria, 2007. / Includes bibliographical references (leaves 105-109)

Thesis (M.App.Sc.) - Carleton University, 2006. / Includes bibliographical references (p. 124-128). Also available in electronic format on the Internet.

Thesis (M.App.Sc.) - Carleton University, 2007. / Includes bibliographical references (p. 101-107). Also available in electronic format on the Internet.

Thesis (M. Eng.)--Carleton University, 2000. / Includes bibliographical references. Also available in electronic format on the Internet.

Η διπλωματική εργασία υλοποιεί και προσομοιώνει αλγόριθμο για τη βέλτιστη διαχείριση φορητών συσκευών σε ετερογενή ασύρματα δίκτυα. Στο πρώτο κεφάλαιο γίνεται μια εισαγωγή στις γενικές αρχές των Κυτταρικών Συστημάτων Κινητών Επικοινωνιών παρουσιάζοντας την βασική ιδέα των διαφόρων γενιών κινητών επικοινωνιών. Στο δεύτερο κεφάλαιο αναλύονται τα συστήματα τρίτης γενιάς – 3G. Στο τρίτο κεφάλαιο αναφέρονται τα τεχνικά χαρακτηριστικά, τα πλεονεκτήματα και οι σχέσεις της πλατφόρμας TETRA. Στο τέταρτο κεφάλαιο περιγράφεται το σύστημα και οι λειτουργίες του TETRAPOL καθώς και τα πλεονεκτήματα και οι υπηρεσίες που προσφέρει αυτό. Στο 5ο κεφάλαιο αναλύονται τα συστατικά οι υπηρεσίες και οι λειτουργίες του iDen. Στο κεφάλαιο 6 γίνεται μια αναφορά στο πρωτόκολλο WiMax. Στα κεφάλαια 7 & 8 παρουσιάζονται ο αλγόριθμος της διαχείρισης συσκευών και η εξομοίωσή του σε MATLAB. / -

Thesis (MEng)--University of Stellenbosch, 2001. / ENGLISH ABSTRACT: SRMA currently used on the SUNSAT field station is an effective MAC layer protocol but lacks several features. Sufficient support for flexible communication, acknowledgement of individual data packets, simultaneous communication of multiple instances from a higher layer over a single underlying layer, and a robust FTP procedure to transfer large amounts of data are some of the features that the SUNSA T field station should cater for. ORBCOMM, GSM and WAP implementations are discussed. Some features from these implementations that are useful in the LEO communication environment are designed into an additional layer of software. This additional layer, called middleware, is proposed and uses SRMA services to deliver store-and-forward services. It supports high volumes of short transactions and session suspend and resume facilities between the SUNSA T satellite and field station. Keywords: SUNSAT, Communication, Field station, WAP, GSM, ORBCOMM / AFRIKAANSE OPSOMMING: Die SRMA pakketkommunikasie-protokol op SUNSA T se prototipe grondterminaal is voldoende om die oordrag van boodskappe oor die kommunikasieverbinding te reguleer. Dit is onvoldoende om fasiliteite soos kommunikasie van 'n aantal instansies in 'n hoër kommunikasie laag oor 'n enkele laer laag en om 'n robuuste data oordrag protokol vir groot hoeveelhede data van 'n grondterminaal te ondersteun. ORBCOMM, GSM en WAP stelsel toepassings word bespreek. Resultate wat spruit uit die drie toepassings word gebruik om kommunikasie in 'n lae wentelbaan kommunikasie omgewing te bevorder. 'n Bykomende sagteware laag, bekend as middle-ware, word aanbeveel om voorafgenoemde funksionaliteit mee te implimenteer. Die middle-ware gebruik die beskikbare dienste van die SRMA pakketkommunikasie-protokol om toegang te verkry na die kommunikasie kanaal. Sodoende kan hoë volumes kort transaksies, en sessie-stop en hervat fasiliteite 'n werklikheid gemaak word. Sleutelwoord: SUNS AT, Kommunikasie, grondterminaal, WAP, GSM, ORBCOMM

Today's mobile computing devices provide a convenient means to search for points-of-interest (POIs) such as restaurants and accommodation. Mobile Preference-Based Search Tools (PBSTs) allow users to identify POIs such as restaurants or accommodation most suited to their needs and constraints using a mobile device. These devices however, have several design constraints including limited screen space and hardware capabilities. Adaptive User Interfaces (AUIs) have been proposed to address these issues but have not been extensively applied to mobile PBSTs such as mobile tourist guides. In addition, AUIs possess several benefits and advantages over static (traditional) interfaces, which do not take a user's preferences, skill set and experience into account. Little research, however, has been conducted into identifying the potential benefits of AUIs for mobile preference-based searching (PBS). The aim of this research was to determine the extent to which an AUI could improve the effectiveness and user satisfaction of mobile PBS. A literature study was conducted to determine the benefits and limitations of existing mobile PBSTs and determine how these could be improved. The potential benefits of AUIs for mobile PBSTs and a mobile map-based visualisation system were identified. A suitable model for incorporating an AUI into a mobile PBST was identified. The requirements for a mobile PBST were combined with the potentially adaptable objects of a Mobile Map-based Visualisation (MMV) system to provide adaptation suggestions for POInter, an existing mobile tourist guide. A field study using POInter was conducted in order to measure the extent to which participants agreed with suggestions provided for adapting the information, interaction and visualisation aspects of the system. These results were used to derive adaptation requirements for A-POInter, an adaptive version of POInter. Using a model-based design approach, an AUI was designed and implemented for A-POInter. An extensive field study was then conducted to evaluate the usability of the adaptations provided by A-POInter. The quantitative and qualitative data collected from the evaluations allowed the usability of A-POInter to be determined. The results of the field study showed that the participants were highly satisfied with the usability and the usefulness of the adaptations provided by A-POInter. Conclusions and recommendations for future work based on the results of the research were then outlined to conclude the dissertation.

Este trabalho visa estudar e implementar a integração entre o domínio de comutação de circuitos e o IP Multimedia Subsystem (IMS) para suportar handovers verticais, ou seja, entre redes de acesso distintas, por exemplo, Global System for Mobile communications (GSM) e WiFi, em especial no Serviço Voice Call Continuity (VCC). Entretanto muito pouco é especificado sobre a integração entre os domínios nas normas das diversas entidades de padronização que tratam sobre o assunto. Assim, apresenta-se uma proposta para essa integração, criando-se uma nova entidade funcional para realizá-la, o Call Data Storage Function (CDSF), que interage com os demais módulos do Serviço VCC e garante que algumas informações que devem ser trocadas entre os módulos não sejam perdidas, devido à conversão de protocolos de sinalização na interface entre tais domínios. O CDSF auxilia também no controle da alocação de endereços de referência utilizados no encaminhamento de chamadas de um domínio para o outro. São definidos os protocolos de acesso ao CDSF, bem como os métodos disponíveis. Em sua concepção, recorre-se a uma modelagem modular, que permite futuras melhorias, apenas por troca de módulos. Como estudos de caso para validar a proposta são apresentados cenários de chamadas que utilizam o Serviço VCC, passando pelo CDSF. Por fim, conclui-se que a integração entre os domínios é viável se a proposta deste trabalho for utilizada. Também se demonstra que a separação dos planos de controle dos planos de dados (de usuário) é uma das contribuições fundamentais da arquitetura NGN para o sucesso de suas implementações, como por exemplo o IMS.Além disso, destacam-se as vantagens que o Serviço VCC pode agregar ao IMS, contribuindo para sua adesão em menor prazo pelas operadoras de telecomunicações, dado que esse serviço contribui para a integração de redes, cada vez mais convergentes, agregando mobilidade e continuidade à sua utilização. / This work intends to study and implement the integration between the circuit switching domain and the IP Multimedia Subsystem (IMS) to support vertical handovers that are between different access networks, such as Global System for Mobile communications (GSM) and WiFi. Therefore the specifications are incomplete about this topic in standards from the entities who works with this subject. Then, is presented a new proposal for this integration: a new functional entity to realize this integration: the Call Data Storage Function (CDSF), which interacts with other modules of VCC Service and guarantees that some information shared between modules are not lost, due to conversion of signalling protocols in the interface between domains. Besides that, CDSF helps in the control of allocation of reference address that are used to route calls from one domain to another. Access protocols to CDSF are defined and CDSF methods are exposed. The CDSF design uses a modular approach, which allows future improvements, just changing modules. As case studies to validate this work proposal, call scenarios are presented that uses the VCC Service, using CDSF. Finally, it is concluded that the integration between domains is viable if this work proposal is used. It is presented, as well, that the separation between control plans and data plans is one of the main contributions of NGN architecture to the success of its implementations, like IMS. Furthermore, it is exposed the advantages that VCC Service can aggregate to IMS, contributing for more rapidly adoption by telecommunications operators, considering that this service helps the networks integration, adding convergence, mobility and continuity.

This research is the array processing help wireless communication techniques to increase the signal accuracy. This technique has an important part of prevalent applications. The wireless communication system, radar, and sonar. Beamforming is one of methods in array processing that filters signals based on their capture time at each element in an array of antennas spatially. Numerous studies in adaptive array processing have been proposed in the last several decades, which are divided in two parts. The first one related to non-adaptive beamforming techniques and the next one related to digitally adaptive Beamforming methods. The trade-off between computational complexity and performance make them different. In this thesis, we concentrate on the expansion of array processing algorithms in both non-adaptive and adaptive ones with application of beamforming in 4G mobile antenna and radar systems. The conventional and generalized side-lobe canceller (GSC) structures beamforming algorithms were employed with a phase array antenna that changed the phase of arrivals in array antenna with common phased array structure antennas. An eight-element uniform linear array (ULA), consisting of di-pole antennas, represented as the antenna array. An anechoic chamber measures the operation of beamforming algorithms performance. An extended modified Kaiser weighting function is proposed to make a semi-adaptive structure in phased array beamforming. This technique is extended to low complexity functions like hyperbolic cosine and exponential functions. Furthermore, these algorithms are used in GSC beamforming. The side-lobe levels were so lower than other algorithms in conventional beamforming around -10 dB. On the other hand, a uniform linear arrays for smart antenna purposes designed to utilize in implementing and testing the proposed algorithms. In this thesis, performance of smart antenna with rectangular aperture coupled microstrip linear array which experimental investigations carried out for obtaining X-band operation of rectangular microstrip antenna by using aperture coupled feeding technique. Frequency range set at approximately 8.6 to 10.9 GHz, by incorporating frequency range of the antenna resonates for single wideband with an impedance bandwidth of 23%. The enhancement of impedance bandwidth and gain does not affect the nature of broadside radiation characteristics. This thesis describes the design, operation, and realization of the beamforming such as Sidelobe level (SLL) control and null forming array antenna are examined with the prototype. An antenna radiation pattern beam maximum can be simultaneously placed towards the intended user or Signal of interest (SOl), and, ideally nulls can be positioned towards directions of interfering signals or signals not of interest (SNOIs). Finally, we focused on the adaptive digitally algorithms in compact antenna that faces with mutual coupling. The variable step-size normalized lease mean square (VS-NLMS) algorithm is implemented in beamforming. This algorithm utilizes continuous adaptation. The weights are attuned that the final weight vector to the most satisfied result. The gradient vector can be achieved by iterative beamforming algorithm from the available data. This algorithm is compared with LMS, NLMS, VSS-NLMS algorithms, it is determined that the VSS-NLMS algorithm is better performance to other algorithms. Finally, we introduced novel adaptive IP-NNLMS beamformer. This beamformer reaches to faster convergence and lower error floor than the previous adaptive beamformers even at low SNRs in presence of mutual coupling. The experimental results verified the simulation results that the proposed technique has better performance than other algorithms in various situations. / Includes bibliography. / Dissertation (Ph.D.)--Florida Atlantic University, 2016. / FAU Electronic Theses and Dissertations Collection

Este trabalho visa estudar e implementar a integração entre o domínio de comutação de circuitos e o IP Multimedia Subsystem (IMS) para suportar handovers verticais, ou seja, entre redes de acesso distintas, por exemplo, Global System for Mobile communications (GSM) e WiFi, em especial no Serviço Voice Call Continuity (VCC). Entretanto muito pouco é especificado sobre a integração entre os domínios nas normas das diversas entidades de padronização que tratam sobre o assunto. Assim, apresenta-se uma proposta para essa integração, criando-se uma nova entidade funcional para realizá-la, o Call Data Storage Function (CDSF), que interage com os demais módulos do Serviço VCC e garante que algumas informações que devem ser trocadas entre os módulos não sejam perdidas, devido à conversão de protocolos de sinalização na interface entre tais domínios. O CDSF auxilia também no controle da alocação de endereços de referência utilizados no encaminhamento de chamadas de um domínio para o outro. São definidos os protocolos de acesso ao CDSF, bem como os métodos disponíveis. Em sua concepção, recorre-se a uma modelagem modular, que permite futuras melhorias, apenas por troca de módulos. Como estudos de caso para validar a proposta são apresentados cenários de chamadas que utilizam o Serviço VCC, passando pelo CDSF. Por fim, conclui-se que a integração entre os domínios é viável se a proposta deste trabalho for utilizada. Também se demonstra que a separação dos planos de controle dos planos de dados (de usuário) é uma das contribuições fundamentais da arquitetura NGN para o sucesso de suas implementações, como por exemplo o IMS.Além disso, destacam-se as vantagens que o Serviço VCC pode agregar ao IMS, contribuindo para sua adesão em menor prazo pelas operadoras de telecomunicações, dado que esse serviço contribui para a integração de redes, cada vez mais convergentes, agregando mobilidade e continuidade à sua utilização. / This work intends to study and implement the integration between the circuit switching domain and the IP Multimedia Subsystem (IMS) to support vertical handovers that are between different access networks, such as Global System for Mobile communications (GSM) and WiFi. Therefore the specifications are incomplete about this topic in standards from the entities who works with this subject. Then, is presented a new proposal for this integration: a new functional entity to realize this integration: the Call Data Storage Function (CDSF), which interacts with other modules of VCC Service and guarantees that some information shared between modules are not lost, due to conversion of signalling protocols in the interface between domains. Besides that, CDSF helps in the control of allocation of reference address that are used to route calls from one domain to another. Access protocols to CDSF are defined and CDSF methods are exposed. The CDSF design uses a modular approach, which allows future improvements, just changing modules. As case studies to validate this work proposal, call scenarios are presented that uses the VCC Service, using CDSF. Finally, it is concluded that the integration between domains is viable if this work proposal is used. It is presented, as well, that the separation between control plans and data plans is one of the main contributions of NGN architecture to the success of its implementations, like IMS. Furthermore, it is exposed the advantages that VCC Service can aggregate to IMS, contributing for more rapidly adoption by telecommunications operators, considering that this service helps the networks integration, adding convergence, mobility and continuity.