This thesis deals with massive wooden buildings especially with regard to the current approach to their design, assessment and approval. In this thesis are shown future possibilities of development of traditional wooden buildings with regard to current thermal technical requirements. Theoretical considerations are then compared with measurements which were performed on massive wooden wall samples.

The subject of my diploma thesis is to design timber and steel variants of riding hall. For static assessment was chosen timber. The hall is a one nave building. The dimensions of ground plans is 35,0 m x 75,0 m and the hall is 11.70 meters high. The load-bearing was formed by a curved glue laminated timber trusses. The building is located in Český Těšín, climate loads are designed for the area. The calculation were made in accordance with the Czech technical norms ČSN EN.

In this thesis I solve draft of new building of sport´s centre on the level of documentation for construction. The house is located on the outskirt of Kroměříž. It is a building without the basement which consist of one floor part and three floor part on the area of 531,73 m2. The plot´s terrain is flat. The circuit structure consist of reinforced concrete walls with ventilated facade – metal and wooden. Above one part of the floor plan there is flat green roof, above the other ther is barrel roof with glue laminated girders and compact roofing made of foamglass and metal sheet. In the building the is a hall with climbing wall, two smaller halls and one bigger, sanitary facilities for visitors and cafe/bar.

The aim of the final thesis was to design and assess timber loadbearing structure of planetarium located in Brno and height of the construction 10 m. Designed building of planetarium consists of dome and hall, which operate separately. The structure is designed from glue laminated timber, solid timber and steel bracing, ridge ring and connecting elements. Building foundations is solved by reinforced anchor blocks fixed to foundation pads, which are connected by foundation strips. Loadbearing structure of the dome consists of arched beams together with purlins and ridge ring. Stability is ensured by 4 fields of cross bracing located between purlins. Loadbearing structure of the hall consists of roof and wall beams connected by frame corners together with roof and wall purlins. In gable walls is structure complemented by columns. Stability is ensured by diagonal and vertical elements situated between wall purlins, which together form a truss system.

The aim of this diploma thesis is a design of the multy-storey steel structure with a wooden dome structure of the shopping centre in city of Banská Bystrica, Slovakia. Minimum build-up area is 2 000m2. Minimum number of storeys is set at 2. Steel structure is composed as a frame construction with composite steel-concrete ceilings. Building has 2 storeys at all. Wooden structure of dome is composed by glue laminated curved beams. The structural design and analysis is performed by software SCIA Engineer 15.

The subject of the Diploma thesis is a design wooden structures of a multipurpose sport building in Šumperk. The floor plan measurements of the building are 45,0 x 48,0 m with the maximum height 15,0 m. The solution is choosen on the basis of two variants. The structures is designed with respect to ultimate and serviceability limit states. The multipurpose sport building is consist of 13 main truss centre to centre spacing 4,0m. The main structural system is design as the three-hinged arched structure made of solid timber and in the second variant as the arched structure made of glue laminated timber. The spatial rigidity of the structure is secured of diagonal bracing. The roofing is carried by rafter which are safed by purlin and then by upper chord. The steel columns are design as a part of gable wall. The project was carried out in the scia Engineer 2014 software. Some of the particular elements both variants were checked and designed by manualy calculating. The thesis includes structural design report, joints structures, drawings and production drawing the element of the three-hinged arched structure.

The diploma thesis deals with construction technological project of Aquacentre Kohoutovice. The thesis handles technological prescription of compact external cladding assembly including supporting structure. The thesis also includes assessment of transport itinerary, itemized budget with bill of quantities, design of site equipment, time and financial plan, construction schedule, machine assembly, control and test plan and safety and health care policy.

The work deals with the design of a load-bearing wooden structure of a mountain hotel in the foothills of the Jeseníky Mountains. It is a building without cellar, two floors and a attic room. The floor plan of the building is 17 x 30 m with a porch of 3 x 10 m. Height of the building up to the ridge is 13.2 m. The design of the roof structure has been chosen from 2 different variants. Material usage consist of grown wood of class C24, glued laminated wood of class GL32h and steel S355. Static analysis was calculated by Dlubal RFEM software.

The subject of this thesis is a design documentation for construction of a wellness centre. The main goals include creating structural and material solutions or designing a layout. The designed wellness centre is a building of 3 above-ground floors, which also has a basement. It is situated in a mild slope and shaped into a wave. The building will have a role of a local amenity, providing its visitors a wellness, 3 pools and a space for leisure activities.

The subject of this thesis was a structural design of a timber structure of a mountain hotel in Králíky. The object was a three storey building in a shape of letter U. The project was made in two different variations. The first one consisted of timber frame system with walls securing spacial stability. Computational model was created as a spacial bar 3D model in SCIA Engineer 19.1. The internal forces were calculated using the linear static analysis. The loadbearing structure was designed according to ultimate and serviceability limit states in SCIA Engineer 19.1. The thesis includes joints and anchorage design according to valid standards. Glue laminated timber was chosen as a material for the loadbearing structure while solid timber was chosen for wall structures. The second variation was made out of cross laminated panels. Wall panels were calculated by hand calculation whereas floor and roof panels were calculated using Agrop Nova Element software. Spatial model was made in SCIA Engineer 19.1 software to design joints and for global deformation check as well. The thesis includes engineering report, structural design report as well as drawings.