Spelling suggestions: "subject:"old lines anda mining."" "subject:"old lines ando mining.""
161 |
Die verband tussen ertsgraad, fisiese elektrisiteitverbruik en bedryfskoste in die Suid-Afrikaanse goudmynbedryf, 1965-198210 September 2014 (has links)
M.Com. (Economics) / The objective of the thesis was to examine the relationship between the grade of ore, physical electricity consumption and working cost in the South African gold mining industry for the period 1965 - 1982. The South African economy is heavily dependent on the gold mining industry, which is a major earner of foreign exchange and a large consumer of labour and agricultural and industrial output. The industry is also important as a source of finance for both the private sector and the Treasury. Curtailment of activity within the industry by closing down the more marginal mines or by shortening the life of the industry' as a whole because of rising costs and/or a hesitant gold price, will harm the South African economy in a number of ways. The industry has no option but to regard the gold price as given. The remaining ore reserves tend to be of a lower grade and/or to be found at greater depth. Controlling the working costs would seem to be almost the only option open to the industry.
|
162 |
The dynamics of mining towns: the case of Khutsong township, CarletonvilleTunce, Loyiso January 2016 (has links)
A research report submitted in partial fulfilment of the requirements for the Master of Science in Town and Regional Planning at the school of architecture and planning to the University of the Witwatersrand, Johannesburg, 2016 / Mining and the mining experience is one that has been written about extensively in academia. The history of mining in South Africa has not only shaped the physical landscape of the country but has shaped peoples understanding of the different spaces. The changing dynamics of mining, especially gold mining has played a role on the different experiences in contemporary South Africa. The decline in employment and production in the sector has meant that people in these gold mining towns have had to adapt to the changing times. The concept of resilience allows the research to view spaces such as that of Khutsong to see how people in such places are able to be resilient and the factors impacting on their resilience. / MT2017
|
163 |
A relative moment tensor inversion technique applied to seismicity induced by miningAndersen, Lindsay, Marguerite 18 July 2001 (has links)
Three hybrid moment tensor inversion methods were developed for seismic sources
originating from a small source region. These techniques attempt to compensate for
various types of systematic error (or noise) that influence seismograms recorded in the
underground environment in order to achieve an accurate and robust measure of the
seismic moment tensor. The term 'hybrid' was used to distinguish between the
relative method proposed by Dahm (1995) and the methods developed in this thesis.
The hybrid methods were essentially weighting schemes designed to enhance the
accuracy of the computed moment tensors by decreasing the influence of any low
quality observations, to damp (or amplify) any signals that have been overestimated
(or underestimated) due to local site effects, and to correct for raypath focussing or
defocussing that results from inhomogeneities in the rockmass.
The weighting or correction applied to a particular observation was derived from the
residuals determined when observed data were compared with corresponding
theoretical data (for a particular geophone site, sensor orientation and wave phase) and
were calculated using a cluster of events rather than a single event. The first and
second weighting schemes were indirectly related to the mean and the median of the
residuals where the residuals were defined as the ratio of the theoretical to observed
data. In the third scheme, the residuals were defined as the difference between the
observed and theoretical data and the weights were based on the distance of a data
point (measured in standard deviations) from the mean residual. In each of the
weighting schemes, the correction was applied iteratively until the standard error of
the least-squares solution (normalised to the scalar seismic moment) was a minimum.
The schemes were non-linear because new weights were calculated for each iteration.
A number of stability tests using synthetic data were carried out to quantify the source
resolving capabilities of the hybrid methods under various extreme conditions. The
synthetic events were pure double-couple sources having identical fault-plane
orientations, and differing only in rake. This similarity in the mechanisms was chosen
because the waveforms of tightly grouped events recorded underground often show
high degrees of similarity. For each test, the results computed using the three hybrid
methods were compared with one another and with those computed using the single
event, absolute method and two relative methods (with and without a reference
mechanism). In the noise-free situation, it was found that the relative method without
reference mechanism showed the highest resolution of mechanisms, provided that the
coverage of the focal sphere was not too sparse (> 3 stations). The hybrid method
using a median correction was found to be the most robust of all the methods tested in
the most extreme case of poor coverage (2 stations) of the focal sphere.
When increasing levels of pseudo-random noise were applied to the data, the absolute
moment tensor inversion method, the hybrid method using a median correction, and
the hybrid method using a weighted mean correction all showed similar robustness
and stability in extreme configurations concerning network coverage of the focal
sphere and noise level. When increasing levels of systematic noise were added to the
data, the hybrid methods using a median correction and weighted mean correction
were found to exhibit similar robustness and stability in extreme configurations
concerning network coverage of the focal sphere and systematic noise. In all
situations investigated, these two hybrid methods outperformed the relative and
absolute methods.
The hybrid moment tensor inversion methods using a median and weighted mean
correction were applied to a cluster of 14 events, having remarkably similar
waveforms, recorded at Oryx Gold Mine. For comparative purposes, the absolute
method was also applied. The inputs to the inversion methods consisted of the spectral
plateaus of both P- and S-waves at frequencies below the comer frequency of the
time-integrated displacement traces. The polarities of dominant motion were used as
an additional constraint and were determined from cross-correlation of observed with
synthetic P- or S-waves. The solutions computed using the hybrid moment tensor
inversion using a median correction displayed a distinct improvement after the
iterative residual correction procedure was applied. The radiation patterns and faultplane
solutions showed a high degree of similarity, and are probably more accurate
reflections of reality than those computed using the absolute moment tensor inversion
methods. These observations are very encouraging and point towards the method's
potential for use as a standard processing tool for mine seismicity.
The implications of this work are a better understanding of the focal mechanisms of
seismic events induced by mining activities, ultimately leading to improved safety
underground.
|
164 |
Distribution and mode of occurrence of gold in the Chibougamau District, Quebec.Prochnau, John Franklin. January 1971 (has links)
No description available.
|
165 |
Impact of alluvial gold mining on surface water quality in the Revue basin-Manica District, Mozambique.Vicente, Enoque Mendes. January 2000 (has links)
The upper part of the Revue basin in the Manica District, Mozambique is located in a mountainous
area underlain by rocks of the Manica greenstone belt. This greenstone belt has alluvial gold deposits
in the Revue river and its tributaries Chua and Zambuzi. Alluvial gold in the Manica District has
been mined by local people using artisanal mining methods (panning) and by small scale companies.
The recovery process of gold involves washing of the auriferous gravel with large quantities of water
and the surface water quality has been impaired in this process. The aim of this dissertation is to
assess the impact of alluvial gold mining on surface water quality in the Revue basin. Physical and
chemical characteristics of the surface water were determined upstream of, within and downstream of
the mining area and in the main tributaries immediately before flowing into the Revue river.
Upstream of the mining area the water is clear and the rock types of the Manica greenstone belt are
likely to be the only source of metals dissolved in the water. Metal concentrations are generally low
except Cd, Mo and Ni but the water in this area meets all World Health Organization (WHO)
recommendations for drinking water. In contrast within the mining area there are signs of pollution.
The water is cloudy and the highest concentrations of most metals are found in the lower part of this
area where mining activity is very intense. Thus, the alluvial gold mining is responsible for elevated
metal concentrations and constitutes the major point source of pollution in the Revue basin. Water
quality within the mining area has been affected and metals Ba, Pb and Mn have concentrations
exceeding the WHO recommended values for drinking water. Downstream of the mining area the
impounded water in the Chicamba Dam, which is the source of potable water for Chimoio City,
reduces the water flow in the Revue river and sedimentation of suspended sediments occurs, together
with associated adsorption and precipitation processes. This result in general improvement of water
quality with only Ba and Pb concentrations remaining above the WHO recommended values for
drinking water. Increase in concentration of metals AI, Ba, K, Pb and Sr occurring in the Chicamba
Dam is likely to be due to input to the dam of water from rivers which cross the Granite-gneiss
Complex. Geochemical speciation modelling using MINTEQA2 program suggests that the behaviour
of metals Cr, AI, Mn and Fe is controlled by redox and precipitation reactions while the behaviour of
As, Cd, Zn, Cu, Ni, Pb, Ba and Ca is controlled by adsorption on the sediment surfaces. Changes in
environmental conditions, such as pH and dissolved organic matter (DOM) could result in metals
being released back into the water. Modelling the effect of a change in pH and variation in DOM
indicate that adsorption and precipitation would decrease with decreasing pH values and with
increasing DOM. The chemical form of dissolved metals, the type of interactive processes
(absorption and precipitation) and concentration of particulate matter gives the distribution of
pollutants while the transport process affect the fate of pollutants in the Revue river water. / Thesis (M.Sc.)-University of Natal, Durban, 2000.
|
166 |
The Queensland gold-miner in the late nineteenth century : his influence and interestsStoodley, June. Unknown Date (has links)
No description available.
|
167 |
The Queensland gold-miner in the late nineteenth century : his influence and interestsStoodley, June. Unknown Date (has links)
No description available.
|
168 |
The Queensland gold-miner in the late nineteenth century : his influence and interestsStoodley, June. Unknown Date (has links)
No description available.
|
169 |
The Queensland gold-miner in the late nineteenth century : his influence and interestsStoodley, June. Unknown Date (has links)
No description available.
|
170 |
The Queensland gold-miner in the late nineteenth century : his influence and interestsStoodley, June. Unknown Date (has links)
No description available.
|
Page generated in 0.0997 seconds