Spelling suggestions: "subject:"agradient estimation"" "subject:"9gradient estimation""
1 |
Odhady diskrétního rozložení pravděpodobnosti a bootstrap / Estimation of Discrete Probability Distribution and BootstrapLacinová, Veronika January 2015 (has links)
Doctoral thesis is focused on the unconventional methods of the discrete probability estimation of categorical quantity from its observed values. The gradient of quasinorm and so-called line estimation were emlopyed for these estimations. Bootstrap method was used for the improvement of accuracy. Theoretical results for selected quasinorms were illustrated on specific examples.
|
2 |
Anthropomimetic Control Synthesis: Adaptive Vehicle Traction ControlKirchner, William 02 May 2012 (has links)
Human expert drivers have the unique ability to build complex perceptive models using correlated sensory inputs and outputs. In the case of longitudinal vehicle traction, this work will show a direct correlation in longitudinal acceleration to throttle input in a controlled laboratory environment. In fact, human experts have the ability to control a vehicle at or near the performance limits, with respect to vehicle traction, without direct knowledge of the vehicle states; speed, slip or tractive force. Traditional algorithms such as PID, full state feedback, and even sliding mode control have been very successful at handling low level tasks where the physics of the dynamic system are known and stationary. The ability to learn and adapt to changing environmental conditions, as well as develop perceptive models based on stimulus-response data, provides expert human drivers with significant advantages. When it comes to bandwidth, accuracy, and repeatability, automatic control systems have clear advantages over humans; however, most high performance control systems lack many of the unique abilities of a human expert. The underlying motivation for this work is that there are advantages to framing the traction control problem in a manner that more closely resembles how a human expert drives a vehicle. The fundamental idea is the belief that humans have a unique ability to adapt to uncertain environments that are both temporal and spatially varying. In this work, a novel approach to traction control is developed using an anthropomimetic control synthesis strategy. The proposed anthropomimetic traction control algorithm operates on the same correlated input signals that a human expert driver would in order to maximize traction. A gradient ascent approach is at the heart of the proposed anthropomimetic control algorithm, and a real-time implementation is described using linear operator techniques, even though the tire-ground interface is highly non-linear. Performance of the proposed anthropomimetic traction control algorithm is demonstrated using both a longitudinal traction case study and a combined mode traction case study, in which longitudinal and lateral accelerations are maximized simultaneously. The approach presented in this research should be considered as a first step in the development of a truly anthropomimetic solution, where an advanced control algorithm has been designed to be responsive to the same limited input signals that a human expert would rely on, with the objective of maximizing traction. This work establishes the foundation for a general framework for an anthropomimetic control algorithm that is capable of learning and adapting to an uncertain, time varying environment. The algorithms developed in this work are well suited for efficient real time control in ground vehicles in a variety of applications from a driver assist technology to fully autonomous applications. / Ph. D.
|
3 |
Análise dos erros na estimação de gradientes em malhas de Voronoi / Analysis errors in the estimation of gradient in Voronoi meshesJailson França dos Santos 18 March 2013 (has links)
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior / Este trabalho apresenta um estudo teórico e numérico sobre os erros que ocorrem nos
cálculos de gradientes em malhas não estruturadas constituídas pelo diagrama de Voronoi,
malhas estas, formadas também pela triangulação de Delaunay. As malhas adotadas, no
trabalho, foram as malhas cartesianas e as malhas triangulares, esta última é gerada pela
divisão de um quadrado em dois ou quatro triângulos iguais. Para tal análise, adotamos a
escolha de três metodologias distintas para o cálculo dos gradientes: método de Green Gauss,
método do Mínimo Resíduo Quadrático e método da Média do Gradiente Projetado
Corrigido. O texto se baseia em dois enfoques principais: mostrar que as equações de erros
dadas pelos gradientes podem ser semelhantes, porém com sinais opostos, para pontos de
cálculos em volumes vizinhos e que a ordem do erro das equações analíticas pode ser
melhorada em malhas uniformes quando comparada as não uniformes, nos casos
unidimensionais, e quando analisada na face de tais volumes vizinhos nos casos
bidimensionais. / This work presents a theoretical and numerical study on the errors that occur in the
calculation of gradients on unstructured meshes Voronoi type, these meshes, also formed by
Delaunay triangulation. The meshes adopted in the work were cartesian and triangular
meshes, the latter is formed by dividing a square in two or four equal triangles. For this
analysis, we adopt the choice of three different methodologies for the calculation of gradients:
Green Gauss method, weighted least-squares method and mean value of the projected
gradients method. The text is based on two main approaches: to show that the equations of
errors given by the gradients may be similar, but with opposite signs, for calculation point in
opposite volumes. And show that the order of the error of the analytical equations can be
improved in uniform mesh when compared to not uniform, the one-dimensional case, and
when viewed from the opposite face of such volumes for the two-dimensional case.
|
4 |
Optimizing Reflected Brownian Motion: A Numerical StudyZihe Zhou (7483880) 17 October 2019 (has links)
This thesis focuses on optimization on a generic objective function based on reflected Brownian motion (RBM). We investigate in several approaches including the partial differential equation approach where we write our objective function in terms of a Hamilton-Jacobi-Bellman equation using the dynamic programming principle and the gradient descent approach where we use two different gradient estimators. We provide extensive numerical results with the gradient descent approach and we discuss the difficulties and future study opportunities for this problem.
|
5 |
Formations and Obstacle Avoidance in Mobile Robot ControlÖgren, Petter January 2003 (has links)
<p>This thesis consists of four independent papers concerningthe control of mobile robots in the context of obstacleavoidance and formation keeping.</p><p>The first paper describes a new theoreticallyv erifiableapproach to obstacle avoidance. It merges the ideas of twoprevious methods, with complementaryprop erties, byusing acombined control Lyapunov function (CLF) and model predictivecontrol (MPC) framework.</p><p>The second paper investigates the problem of moving a fixedformation of vehicles through a partiallykno wn environmentwith obstacles. Using an input to state (ISS) formulation theconcept of configuration space obstacles is generalized toleader follower formations. This generalization then makes itpossible to convert the problem into a standard single vehicleobstacle avoidance problem, such as the one considered in thefirst paper. The properties of goal convergence and safetyth uscarries over to the formation obstacle avoidance case.</p><p>In the third paper, coordination along trajectories of anonhomogenuos set of vehicles is considered. Byusing a controlLyapunov function approach, properties such as boundedformation error and finite completion time is shown.</p><p>Finally, the fourth paper applies a generalized version ofthe control in the third paper to translate,rotate and expanda formation. It is furthermore shown how a partial decouplingof formation keeping and formation mission can be achieved. Theapproach is then applied to a scenario of underwater vehiclesclimbing gradients in search for specific thermal/biologicalregions of interest. The sensor data fusion problem fordifferent formation configurations is investigated and anoptimal formation geometryis proposed.</p><p><b>Keywords:</b>Mobile Robots, Robot Control, ObstacleAvoidance, Multirobot System, Formation Control, NavigationFunction, Lyapunov Function, Model Predictive Control, RecedingHorizon Control, Gradient Climbing, Gradient Estimation.</p>
|
6 |
Formations and Obstacle Avoidance in Mobile Robot ControlÖgren, Petter January 2003 (has links)
This thesis consists of four independent papers concerningthe control of mobile robots in the context of obstacleavoidance and formation keeping. The first paper describes a new theoreticallyv erifiableapproach to obstacle avoidance. It merges the ideas of twoprevious methods, with complementaryprop erties, byusing acombined control Lyapunov function (CLF) and model predictivecontrol (MPC) framework. The second paper investigates the problem of moving a fixedformation of vehicles through a partiallykno wn environmentwith obstacles. Using an input to state (ISS) formulation theconcept of configuration space obstacles is generalized toleader follower formations. This generalization then makes itpossible to convert the problem into a standard single vehicleobstacle avoidance problem, such as the one considered in thefirst paper. The properties of goal convergence and safetyth uscarries over to the formation obstacle avoidance case. In the third paper, coordination along trajectories of anonhomogenuos set of vehicles is considered. Byusing a controlLyapunov function approach, properties such as boundedformation error and finite completion time is shown. Finally, the fourth paper applies a generalized version ofthe control in the third paper to translate,rotate and expanda formation. It is furthermore shown how a partial decouplingof formation keeping and formation mission can be achieved. Theapproach is then applied to a scenario of underwater vehiclesclimbing gradients in search for specific thermal/biologicalregions of interest. The sensor data fusion problem fordifferent formation configurations is investigated and anoptimal formation geometryis proposed. Keywords:Mobile Robots, Robot Control, ObstacleAvoidance, Multirobot System, Formation Control, NavigationFunction, Lyapunov Function, Model Predictive Control, RecedingHorizon Control, Gradient Climbing, Gradient Estimation. / QC 20111121
|
7 |
Análise dos erros na estimação de gradientes em malhas de Voronoi / Analysis errors in the estimation of gradient in Voronoi meshesJailson França dos Santos 18 March 2013 (has links)
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior / Este trabalho apresenta um estudo teórico e numérico sobre os erros que ocorrem nos
cálculos de gradientes em malhas não estruturadas constituídas pelo diagrama de Voronoi,
malhas estas, formadas também pela triangulação de Delaunay. As malhas adotadas, no
trabalho, foram as malhas cartesianas e as malhas triangulares, esta última é gerada pela
divisão de um quadrado em dois ou quatro triângulos iguais. Para tal análise, adotamos a
escolha de três metodologias distintas para o cálculo dos gradientes: método de Green Gauss,
método do Mínimo Resíduo Quadrático e método da Média do Gradiente Projetado
Corrigido. O texto se baseia em dois enfoques principais: mostrar que as equações de erros
dadas pelos gradientes podem ser semelhantes, porém com sinais opostos, para pontos de
cálculos em volumes vizinhos e que a ordem do erro das equações analíticas pode ser
melhorada em malhas uniformes quando comparada as não uniformes, nos casos
unidimensionais, e quando analisada na face de tais volumes vizinhos nos casos
bidimensionais. / This work presents a theoretical and numerical study on the errors that occur in the
calculation of gradients on unstructured meshes Voronoi type, these meshes, also formed by
Delaunay triangulation. The meshes adopted in the work were cartesian and triangular
meshes, the latter is formed by dividing a square in two or four equal triangles. For this
analysis, we adopt the choice of three different methodologies for the calculation of gradients:
Green Gauss method, weighted least-squares method and mean value of the projected
gradients method. The text is based on two main approaches: to show that the equations of
errors given by the gradients may be similar, but with opposite signs, for calculation point in
opposite volumes. And show that the order of the error of the analytical equations can be
improved in uniform mesh when compared to not uniform, the one-dimensional case, and
when viewed from the opposite face of such volumes for the two-dimensional case.
|
Page generated in 0.1133 seconds