This Master’s Thesis deals with a design of a detached Leisure center. The building is situated on a specific plot of cadastral area of Brno city, more precisely in Útěchov u Brna. The aim was to create an object suitable by its disposition solution for requirements of leisure center for children and adults. The building is designed as basementless, with two above-ground floors topped by flat roof. Wooden frame system with inserted thermal insulation and ETICS system in case of peripheral walls was proposed for load-bearing walls. Load-bearing structure of ceiling and roof is made by wooden-steel Posi-joist beams. The work also includes fire safety and thermo-technical assessment.

The aim of this diploma thesis is a design of a horse riding centre. The horse riding centre is situated on the outskirts of the village of Střítež nad Bečvou in the Vsetín district. Within the horse riding centre, there are a main building a swell as horse stables with other equestrian facilities for riders and a riding hall. The main centre building has two above-ground floors. On the ground floor, there is a restaurant and a reception hall. On the first floor, there is a guest house providing rooms with ten beds in total. The main building also includes a private residence for the centre owner. The stables provide fourteen boxes for horses to be stabled. The horse riding centre is designed to play a role of a new tourist attraction in the region. The diploma thesis deals with the main building design. The building is supposed to be bricked with ceramic blocks and roofed with a gable roof but partly also with a flat roof. The thesis also looks into two special features – the design of health-technical installation, gas and water plumbing. Last but not least, it designs a steel roof truss.

The subject of this diploma thesis is a layout of car service object in Brno – Horní Heršpice, Železná street. The building is designed as four-floor with flat - cascaded roof, which will be partially used also like a terrace. The object is intended for repairs and servicing of the trucks and buses. Inside the building are situated also offices, training room and temporary accommodation for the drivers. Supporting structure of the building is composed by ferroconcrete prefabricated shell, which horizontal supporting structure is composed by ferroconcrete pre-stressed panels spiroll. The curtain enclosure wall is designed from Sendwix system line-sand bricks with the outer thermal insulation. A building plot is flat. A part of the layout is also thermal and technical, acoustic and fire safety assessment. This diploma thesis contain also five specializations – layout of ferronconrete pre-stressed girder, layout of steel shelter, layout of construction basing, scheme of the overall heat output of the building and sewerage layout.

The aim of the project was to design a library with a gallery in the cadastral area of Nový Jičín – Horní předměstí of Bohuslava Martinů street. The main idea was to create a comfortable backdrop for students as well as the possibility of cultural education in the form of various exhibitions. The plan will be implemented according to the investor's requirements and will be in line with the land-use plan. This is a basement new building of the library with 2 above-ground floors. This large new building is in the shape of an irregular U. The building is based on a base plate. A combined wall and column construction system is used. The object is designed with a rasterized front lightweight perimeter casing with a front web-shaped facade

Diploma thesis deal with New building of The Commercial-administrative center in Chomutov. The Center has common basement and overground part is created from three separated buildings. These buildings are designed to create an atrium between them and sidewalk follow-up to adjacent sidewalks. Western building has two above ground floor, which they offer administrative place. Other two buildings are one above ground floor. They have place to shop, light refection and toilets. In basement of the Center there are a technological background and parking places. The remaining parking places are located on the terrain in the northern part. Construction system of the building is monolithic reinforced concrete. Roof is flat and single-skinned. Architectural building solution is created in software Archicad 21.0.0 Component from the company Graphisoft. Building physics is processed in group of software’s from the company K-CAD spol. s.r.o. In the specialization is the Diploma thesis dealing with study of roof panel. Panel is modeled in software RFEM 5.14 from the company Dlubal software s.r.o. The study then deals with the evaluation of the stress in the board from the most unfavorable combination of loads, the design of the reinforcement and the assessment of the reality of the proposed slab thickness, which was determined in the framework of study work using empirical formulas.

The aim of my thesis is to design and elaborate the project documentation for construction of the nursery school in the cadastral area Prague-Černý most. It is a two-storey partially basement building, witch with its layout corresponds to the conditons of the building operation. Nusery school is designed for 4 departments after 24 kids. The construction system of the object is designed as Porotherm system. External load-bearing structures are designed as ventilated facade with thermal insulation of 180 mm thickness. Vertical load-bearing structures of 1st and 2nd floor will be lined with brick blocks Porotherm 38 profi and 1.S bricks from the Best 30 permanent formwork. The inner bearing walls are designed with Porotherm 24 profi and Porotherm 11,5 Profi is used for non-load-bearing masonry. The exterior facade cladding is designed from HPL compact laminate boards. The internal staircase is half-turn stairs, reinforced concrete, monolithic. Horizontal supporting structures consist of Porotherm ceramic concrete system (POT beams and miako insert) with a thickness of 250 mm. The roof is designed as a vegetation, some of witch is supplemented with a gutter. The windows and doors are plastic-aluminium. Floor coverings are designed taking into the use of individual rooms such as floor screed, ceramic tiles and cork floors. The main aim of my work was to solve the disposition for the given purpose, to design a suitable construction system and to draw up the drawing documentation including the text part.

Diploma thesis deals with a design of the retirement home for seniors in the town of Bučovice. The house is a three-storey building with a rectangular floor plan partly situated in the slope. In the middle of the building, there is an atrium reaching to the second floor. The construction is covered by a flat green roof. The building is designed for the permanent residence of 28 seniors, with their rooms including sanitary facilities located on the two upper floors. The operational and technical facility for both the residents and personnel, including canteen with kitchen and doctor's practice, is located on the ground floor of the house. The construction system of the building is designed as a combination of monolithic concrete and masonry. The whole house is designed as accessible.

The diploma thesis deals with the design and elaboration process of project documentation of newly-built multi-purpose building in Sturovo. The building is designed as a three-storey building with a partial fourth storey. A footprint of the building is created by the irregular shape of the letter „L“ with an angle of 110 °. The building is roofed with a warm flat roof. The roof above the third storey is designed as a walkable flat roof divided in a green roof part and part with concrete paving. Spatial zoning of the building consists of three main spaces. There is a bookstore zone and coffee shop situated on the ground floor. The second and third floor is designed for administrative spaces. Premises of the second floor are designed as an activity-based office with open spaces. Third floor focus on closed offices. The meeting rooms, chill-out zones, break rooms with kitchenettes are available in both of them. Technical facilities and utility rooms are situated also on the ground floor. There is a room with kitchenette, storage rooms and utility rooms in the fourth ground. Public zones of building and administrative zones are accessible. The structural system of a building is designed as a cast-in-place reinforced concrete frame in a combination with a shear core. Ceilings consist of cast-in-place beam-supported reinforced concrete one-way slab. The structure is based on foundation pads and strip foundations. infill wall is made of vertically perforated blocks. Exterior walls and insulated with ventilated facades system.

The topic of this thesis is a project documentation of a Nursery School located in Trencin part Juh. The object had been designed as a stand-alone three storey building. The topic of this thesis is a project documentation of a nursery school located in Trencin quarter - Juh. The object has been designed as a stand-alone three storey building with two above- and one under-ground floors. Nursery school consists of two separate classrooms for kids, part for operations and employees, two creative areas, basement with storage space and garden. Only basic food is going to be prepared directly in the building, main courses will be brought by external provider and warmed up. A combined wall construction system made of Porotherm 30 Profi bricks and one reinforced concrete pillar have been used. In the basement the walls are constructed using permanent shuttering filled with concrete. Ceilings are of reinforced concrete. The object is founded on foundation stripes. The roof is then designed as one-shell flat with standard order of all layers. Above the 2nd floor the roof is projected as walk able , in the eastern part above the 1st floor as walk able with concrete paving on the rectification pads and above western part of the 1st floor it is designed as green vegetation roof. The access road to the object leads to the northern side of the building. In the eastern part of the estate an independent parking lot for parents is located, in the western part then one for employees and supplying. The southern part of the object is occupied by garden with projected area for playing and stay of the kids outside.

The diploma thesis deals with a work out project documentation of multifunctional building. The new building is located in the cadastral area of Moravské Budějovice. The object will have two uses. The first part of the building will be used as flats and the second part will be used as office space for design company with facilities. There are three floors in the residental part where seven flats are proposed (4x 3+1, 2x 2+kk and a barrier free flat 2+1). The other part of the object has two floors with offices. Their area is about 260 m2. There are 23 parking lots for cars in the building. The roof is designed as a vegetation flat roof. The object is based on concrete foundation strips. The vertical load-bearing constructions are made of ceramics bricks, the ceillings and stairs are made of reinforced concrete.