The aim of the work is to design Fire station with a gym in Olomouc. Diploma thesis has three parts. First from institute of building structures, second from intitute of building services and last part is devoted to modeling and assessment of details of building. Fire station is divided into three parts. Garage for 3 fire trucks, main part and gym with training tower. The main part contains toilets, showers, locker rooms, storage places, offices and facilities for firefighters and office rooms. Structural elements of the building are from reinforced concrete. Infill walls are made from ceramic bloks. Thermal insulation is from mineral wool and cladding of the wall is made of fibre-cement boards. The slab in the main part is made of cast-in-place concrete. Others slabs in the garage and gym are made of prefabricated elements. On the building are desined three types of roofs. Extensive green roof, flat roof with a stabilization layer of river aggregates and roof made of insulating sandwich panels. In the thesis is design conception of artificial lighting, ventilating, heating, cooling, water managment, photovoltaics and management scheme of energy and ecological systems. The work contains project documentation for building permits, which were made in accordance with applicable legal and technical regulations.

This master´s thesis elaborates a project documentation of sports rehabilitation center in Brno–Bystrc. The building object is four-storeyed and a partial basement. On the basement floor there is a pool with sauna, gym and fitness with support to assist for all activities offered. On the ground floor there is an entrance, reception for accommodation, restaurant and kitchen for the restaurant. The 2nd overground floors is determined by the rehabilitation clinic. On the grand and overground floor are designed sanitary appliances for the restaurant and patient surgeries. There are projected 9 apartments for weekend accommodation. Apartments allow access to the terrace. Foundations are made strip foundations. The building object is bricked and insulated with ventilated facades. Load bearing structure of the roof create roof trusses.

This Project includes the background of the football club Lučina. The object is situated in the community center of Lučina. The house has three floors. There is a utility room, storage room, laundry facilities and rehabilitation facilities for football players (gym, sauna, jacuzzi, massage) in the basement. In the 1st floor is a locker room with showers for the players and the public buffet. In a separate part is a toilet and garage. In the 2nd floor is an apartment with terrace and facilities for the officers of club. The house is made from brick technology of ceramic blocks. The building is covered with shed roof and vegetation.

The aim of my diploma thesis is to blueprint a design of multi-functional educational console. The dissertation contains several variant studies, color drawings and concrete shape execution. It entails a certain development in the area of positioning and multi-functional appliances. The thesis itself deals with the concrete shape execution of multi-touch educational console as well as seat in the form of gym ball. Short video cut from the area of interactive media forms a part of my work too.

The objective of the present thesis is to design a sports center and provide the relevant design documentation for it. The designed building is situated on a flat plot in Hradec Králové which is intended as a building plot or a sports/relax area. The designed sports center is a two-level building without cellar with a flat roof. The building foundations are designed as foundation strips, mainly from plain concrete. The external, loadbearing, and partition walls are designed with clay blocks POROTHERM. The floor structure is designed with prestressed concrete floor slabs SPIROLL. The thermal insulation is resolved with ventilated facade with facade panels. CEMBRIT SOLID. The building is divided into three individual functional units with one shared entrance. It consists of two sports halls with facilities designed for sportsmen and staff, and a gym together with the facilities for costumers. A restaurant and a kitchen are situated in the second floor.

This thesis summarizes my work on a new apartment building in Slovany, neighbourhood in Pilsen. My primary responsibility was to develop documentation for the project´s design and implementation. The building consists of four floors above ground, an underground floor and a flat roof. The building´s L-shaped plan, rebound 4th floor above ground and balconies lighten the mass of the building. The structural system of the building combined reinforced concrete system of the underground floor, column system of the 1st up to the 3rd floor above ground and wall system of the 4th floor above ground. The building is designed for six residential units with cellars, two garages, a relaxation room and a gym. The thesis includes the preparatory and study reports, architectural and construction solutions, and fire-safety building and construction site equipment solutions.

The aim of this diploma thesis is to project a polyfunctional building including a gym, fitness centre, bar and apartments. The plan is conducted in the form of project documentation, containing all the problems related with this issue. The building is located in the town, Bystřice pod Hostýnem. Considering the functionality, the construction is divided into two parts – southern and northern part. The south of the building is designated for accomodation situated on four floors. The north one, including three floors, is intended for the gym, fitness centre and bar. The terrain of building site slopes down to south-east. The construction will be built of prefabricated reinforced concrete frame construction RIEDER with block filling YTONG containing contact insulation system. The building is constructed with two flat single-shell roofs. This project is primarily focused on functional, disposal and architectural aspect os polyfunctional house.

This diploma thesis solves a project Sports and wellness center. This object is located on land number 1241/549, 1241/571in cadastral office Velké Bílovice. The plot is located on a street Podivínská in Velké Bílovice. Velké Bílovice are smaller town in South Moravia. The building has two floors ane one underground floor. The building is constructed of brick systém SUPERTHERM HELUZ. The perimeter wall is constructed from ceramic blocks HELUZ STI 49. Ceilings are monolithic reinforced concrete. The building offers three squash courts, a fitness center, snack bar, sauna with massage. The entire building is expected movement of persons with reduced mobility. The roof is flat and angled wooden beam. Entrance doors and window are Aluminium

The subject of my diploma thesis is the design documentation for the pension which is designed for the elderly and will be supplemented with a specialty from the air-conditioning branch. The building is situated in the western part of the town Bystřice nad Pernštejnem and it's located at 3058/3 about the total area of 8315,2m. The total footprint of the suggested building is 1161,2 m. The subject has got an irregularly-shaped floor plan. It is made of three subsequent triangels, it has got three above-ground floors with partial basement. The roof of the building is suggested as a warm flat roof with coating insulation. The structural system of a building is designed as longitudinal with shear walls. The exterior building masonry is suggested from sharpened clay blocks Heluz STI 40 with thickness 400 mm. The contact thermal insulation system ETICS with an insulant from EPS with thickness 100 mm is designed for all building. The building for the elderly is from its bigger part meant for citizens who are older than 65 years in the flats for one or two persons in 2FLR and 3FLR. The space for essential services to the residents is located on the 1st FLR. There are also a cafe and a surgery located in a smaller part of the 1st FLR, which are to be used both by the residents and the public.

The subject of the diploma thesis is a project documentation of a multifunctional building within the scope of the implementing documentation. The main goal of the thesis is the design of the layout, construction and material solution, completed by design of the fire safety solutions and assessment in terms of building physics. The multifunctional building has one underground floor and nine above-ground floors. In the basement there are technical facilities of the building and a parking area, in the 1st floor there are business premises, in one part of the 2nd floor there is a gym and the remaining areas are used for administrative purposes as well as the entire 3rd to 9th floor. The construction system is designed as a reinforced concrete monolithic skeleton, completed by a reinforced concrete core. Ceiling structures are monolithic reinforced concrete locally supported slabs. The building is founded on the concrete slab placed on drilled shafts. The main element of the outer wall is curtain walling, which is made from a mullion-transom system.