Spelling suggestions: "subject:"lead injury criterion"" "subject:"lead injury eriterion""
1 |
Finite Element Analysis of Traumatic Brain Injury due to Small Unmanned Aircraft System Impacts on the Human HeadSmith, Alex Nelson 03 May 2019 (has links)
A biofidelic finite element model was developed from an acquired set of CT scans for a range of human head and UAS impacts to provide simulations of multiple velocity scenarios of impact severity at four impact orientations on the human head. The hypothesis was that a correlation existed between the total amounts of kinetic energy of the impact from the UAS and human head collision, as well as that location of impact plays a role in the injury risk sustained. Linear acceleration, angular velocity, and pressure data values were calculated for each individual simulated case and then further correlated to injury risks that represent the severity of damage that would be sustained from the collision. Resulting data proved to show that impact kinetic energy, impact orientation, and impact response of the head and UAS all play vital roles in the amount of damage that is sustained from the impact collisions.
|
2 |
Design of an American Football Helmet Liner for Concussion MitigationRush, Gustavus Alston 12 August 2016 (has links)
The objective of this research was to develop an optimal design for a polymeric American football helmet liner for concussion prevention utilizing experiments and high performance. Along with well-established injury criteria (HIC, SI, and Peak acceleration), localized brain injury mechanisms were explored by employing Finite Element simulations and experimental validation. Varying strain rate experiments (monotonic and hysteresis) were conducted on modern football helmet (Rush, Rawlings, Riddell, Schutt, and Xenith) liners and new possible polymeric foam liner materials. These experiments were used to characterize each material at low strain rates (0.1/sec; Instron), intermediate strain rates (100-120/sec; NOCSAE drop tower) and high strain rates (600-1000/sec; Split Hopkinson Pressure Bar). Experimental design optimization was performed on a football helmet liner by utilizing an exploratory Design of Experiments by National Operating Committee on Standards for Athletic Equipment (NOCSAE) drop tests. FEA simulations of drop impact tests were conducted on a helmeted NOCSAE headform model and a helmeted human head model. Correlations were made between both models to relate localized brain response to the global acceleration and the dynamic-based injury criteria HIC, SI, and Peak acceleration). FEA simulations were experimentally validated by twin-wire drop tests of the NOCSAE headform using correlations for validation of the human head model. The helmeted human head simulations were used to explore a Mild Traumatic Brain Injury (MTBI) limits based localized brain response (e.g. pressure and impulse). Based on these limits, future FEA simulations will be used to explore these limits as helmet liner design criteria.
|
3 |
A coupled finite element-mathematical surrogate modeling approach to assess occupant head and neck injury risk due to vehicular impactsBerthelson, Parker 09 August 2019 (has links)
This study presents mathematical surrogate models, derived from finite element kinematic response data, to predict car crash-induced occupant head and neck injury risk for a broad range of impact velocities (10 – 45 mph), impact locations, and angles of impact (-45° to 45°). The development of these models allowed for wide-scale injury prediction while significantly reducing the overall required number of impact test cases. From these, increases in both the impact velocity and the impact’s locational proximity to the occupant were determined to result in the greatest head and neck injury risks. Additionally, strong interactions between the impact orientation variables (location and angle) produced significant changes in the head injury risk, while the neck injury risk was relatively insensitive to these interactions; likely due to the uniaxiality of the current standard neck injury risk metrics. Overall, this methodology showed potential for future applications in wide-scale injury prediction or vehicular design optimization.
|
4 |
Numerical Simulation of Blast Interaction with the Human Body: Primary Blast Brain Injury PredictionHaladuick, Tyler January 2014 (has links)
In Operations Enduring Freedom and Iraqi Freedom, explosions accounted for 81% of all injuries; this is a higher casualty percentage than in any previous wars. Blast wave overpressure has recently been associated with varying levels of traumatic brain injury in soldiers exposed to blast loading. Presently, the injury mechanism behind primary blast brain injury is not well understood due to the complex interactions between the blast wave and the human body. Despite these limitations in the understanding of head injury thresholds, head kinematics are often used to predict the overall potential for head injury. The purpose of this study was to investigate head kinematics, and predict injury from a range of simulated blast loads at varying standoff distances and differing heights of bursts.
The validated Generator of body data multi-body human surrogate model allows for numerical kinematic data simulation in explicit finite element method fluid structure interaction blast modeling. Two finite element methods were investigated to simulate blast interaction with humans, an enhanced blast uncoupled method, and an Arbitrary Lagrangian Eularian fully coupled method. The enhanced blast method defines an air blast function through the application of a blast pressure wave, including ground reflections, based on the explosives relative location to a target; the pressures curves are based on the Convention Weapons databases. LBE model is efficient for parametric numerical studies of blast interaction where the target response is the only necessary result. The ALE model, unlike classical Lagrangian methods, has a fixed finite element mesh that allows material to flow through it; this enables simulation of large deformation problems such as blast in an air medium and its subsequent interaction with structures. The ALE model should be used when research into a specific blast scenario is of interest, since this method is more computationally expensive. The ALE method can evaluate a blast scenario in more detail including: explosive detonation, blast wave development and propagation, near-field fireball effects, blast wave reflection, as well as 3D blast wave interaction, reflection and refraction with a target.
Both approaches were validated against experimental blast tests performed by Defense Research and Development Valcartier and ConWep databases for peak pressure, arrival time, impulse, and curve shape. The models were in good agreement with one another and follow the experimental data trend showing an exponential reduction in peak acceleration with increasing standoff distance until the Mach stem effect reached head height. The Mach stem phenomenon is a shock front formed by the merging of the incident and reflected shock waves; it increases the applied peak pressure and duration of a blast wave thus expanding the potential head injury zone surrounding a raised explosive. The enhanced blast model was in good agreement with experimental data in the near-field, and mid-field; however, overestimated the peak acceleration, and head injury criteria values in the far-field due to an over predicted pressure impulse force. The ALE model also over predicted the response based on the head injury criteria at an increased standoff distance due to smearing of the blast wave over several finite elements leading to an increased duration loading.
According to the Abbreviated Injury Scale, the models predicted a maximal level 6 injury for all explosive sizes in the near-field, with a rapid acceleration of the head over approximately 1 ms. There is a drastic exponential reduction in the insult force and potential injury received with increasing standoff distance outside of the near-field region of an explosive charge.
|
Page generated in 0.0918 seconds