The aim of the thesis to explain the functionality of seasonal accumulation with an in-depth view on rock bed accumulator. The computational model is based on the project located in Attenkirchen, Germany. After the technical analysis of the model is carried out an economical review can be realized. To conclude the thesis an evaluation is made comparing an accumulation system with a more traditional one.

This thesis investigates laser micromachining using a high pulse repetition frequency (high-PRF) femtosecond fibre laser. Three different types of industrial-grade metals, Stainless steel, Copper, and Aluminium are investigated. The impact of the processing parameters on material removal is studied. Finally the feasibility of the technology in three dimensional micro structuring is explored. The thesis contributes to clarify the main interaction mechanisms occurring in high-PRF femtosecond laser processing. Heat accumulation and particle shielding are identified as main material removal influencing mechanisms. As a result of heat accumulation, lowered ablation thresholds are detected for Aluminium (0.16 J/cm² at 1.02 MHz versus 0.33 J/cm² at 20 kHz) and Stainless steel (0.088 J/cm² at 1.02 MHz versus 0.11 J/cm² at 20 kHz). For the high heat conductive Copper heat accumulation is largely ruled out. Particle shielding is investigated by ultra high speed camera imaging. It is shown that the ablation plumes enlarge at the higher pulse repetition rates. A parameter study investigates material ablation. From this study, appropriate machining parameters are derived with regard to both high ablation rate and removal efficiency, and small roughness: Aluminium: 5 μm pulse spacing / 5 μJ pulse energy, Copper: 7.5 μm pulse spacing / 7 μJ pulse energy, Stainless steel: 5 μm pulse spacing / 3 μJ pulse energy. In addition experimentally and theoretically determined volume ablation rates are compared. For this, a material removal calculation model is designed. Good agreements between theoretical and experimental values are obtained by taking into account effective penetration instead of optical penetration for energy transport. A surface temperature calculation model is designed, providing useful insights into heat accumulation. Heat accumulation observed for Aluminium and Stainless Steel is confirmed by surface temperature rise, calculated based on the remaining energy. Improvement of the model by enhanced energy coupling yields surface temperatures above the melting temperature. This is conclusive to experimental observations. Finally the feasibility of the high-PRF femtosecond laser technology in micromachining is demonstrated by micro mould fabrication. Utilising these moulds, micro-fluidic plastic demonstrators are fabricated by micro-injection moulding.

Le développement actuel de la technologie induit une constante nécessité d’obtenir des tailles de plus en plus petites pouvant descendre jusqu’à des dimensions micrométriques et sub -micrométriques. L’ablation laser, qui a le grand avantage d’un enlèvement de matière très précis, est un candidat prometteur. Dans cette thèse on démontre la faisabilité de tirer avantage des impulsions laser femtosecondes avec la matière pour la micro et nano structuration, et ceci en ayant développé une machine compacte de grande précision et flexibilité. Une approche théorique comparant les régimes d’interaction à haute et basse cadence est présentée. Des investigations de l’efficacité du temps de procédé aussi bien que l’effet de la cadence pendant l’ablation de métaux ont été effectuées. Le potentiel de l’outil multifonctionnel couplé avec un oscillateur laser femtoseconde à haute cadence est montré pour différentes applications en biotechnologie. Les résultats sur la cartographie d’une large zone aussi bien que la nano découpe de précision de tissus biologiques et de matériaux variés sont présentés. Cet outil polyvalent couvre de larges domaines de recherche de la nano découpe d’échantillons biologiques aussi bien que la nanostructuration de différents types de matériaux. C’est d’un grand intérêt pour de nombreuses applications en science des matériaux, nanobiotechnologie et nanomédecine / The current development of technology makes constant the necessity of getting smaller and smaller features sizes down to micrometer and sub micrometer scales. Laser ablation, which has the great advantage of precise material removal, is a promising candidate. In this dissertation we have demonstrated the feasibility to take advantage of the interaction of femtosecond laser pulses with matter for micro- and nano-structuration and this by having developed a compact and high accurate and flexible apparatus. An analyse of the specific physical mechanisms of laser-matter interaction in the femtosecond regime is presented. Investigations on processing time efficiency as well as the effect of the repetition rate during ablation of metals have been performed. The potential of the multifunctional tool coupled with a compact high repetition rate femtosecond oscillator is shown for different applications in biotechnology. Results on large area mapping as well as accurate nanoprocessing of biological tissue and various materials are presented. This versatile tool covers wide research fields from the nanoprocessing of biological samples as well as the nanostructuring of different type of materials. It is of great interest for many applications in material science, nanobiotechnology and nanomedicine

Darbe apžvelgtos užsienio valstybių centralizuoto šilumos tiekimo (CŠT) sistemų darbo režimai ir pagrindiniai parametrai. Išskirtinai atsižvelgta į CŠT sitemas, kuriose yra kogeneracinės jėgainės su šilumos akumuliavimo talpomis. Darbe pateikiami pavyzdžiai, kokios gali būti ir kaip pritaikomos šilumos akumuliavimo talpos. Tokių sistemų pagrindiniai privalumai yra tai, jog naudojantis ŠAT sistema galima subalansuoti CŠT sistemose esančių įrenginių darbo režimus, taip pat esant kogeneracinėms jėgainėms galima pereinant nuo šilumos vartojimo grafiko jų darbą adaptuoti prie elektros vartojimo grafiko. Darbe analizuojamas Mažeikių miesto šilumos tiekimo sistemos darbas esant kogeneracinėms jėgainėms su šilumos akumuliacijos talpomis. Modeliuoti galimi įrenginių darbo režimai dviem prioritetais: pastoviosios galios ir maksimaliosios pikinės elektros energijos gamybos. Gauta, kad efektyvus šilumos akumuliacijos kiekis turėtų būti 200 MWh tai – atitiktų 4 tūkst. m3 talpą dirbant Mažeikių ŠT darbo parametrais. Nustatyta, kad valandinis ŠAT sistemos prijungimo vamzdžių pralaidumas turi būti 17 MW. Ekonominėje dalyje vertinamas ŠAT sistemos pelningumas. ŠAT sistemos pelningumas dirbant pastovios galios režimu yra neigiamas, taigi projektas būtų ekonomiškai nenaudingas, tačiau ŠAT sistemą naudojant pikinės elektros gamybai pelningumas svyruotų nuo -0,5 mln. Lt iki 0,9 mln. Lt, priklausomai nuo to, kaip susiformuos pikinės elektros rinka. / The thesis surveys working regimes and main parameters of centrally supplied heat (CSH) systems of foreign states. The exclusive attention is paid to CHS systems, having combined heat and power plans with heat accumulation tanks. Examples are provided in the thesis of the types of heat accumulation tanks and their application. The main advantages of such systems are that working regimes of devices in the CHS systems may be balanced with the help of HAT system, as well as that their work may be adapted from heat usage schedule to electricity usage schedule, if combined heat and power plants are used. The thesis analyzes the work of Mažeikiai town heat supply system, having combined heat and power plants with heat accumulation tanks. Possible working regimes of devices in two priorities have been modelled: fixed power and maximum peak electric power production. It has been received that the efficient quantity of heat accumulation should be 200 MWh; this would conform to 4 thousand m3 tank under Mažeikiai HS working parameters. It has been determined that the hourly capacity of pipeline of HAT system connection must be 17 MW. Economical part evaluates profitability of HAT system. HAT system’s profitability, using the fixed power for maintenance is negative; the project would be economically unprofitable; however using HAT system for production of peak electric power, profitability would fluctuate from -0.5 million LTL to 0.9 million LTL, depending on formation of peak... [to full text]

This thesis examines techniques that provide a method of computer visualisation of bushfire spread. Existing techniques studied include, Kourtz & O???Regan, Green???s Contact, Heat Accumulation, Percolation modelling and Huygens??? Principle by Anderson et.al., French, Roberts, Richards. Many of these techniques are extended as part of a comprehensive study into how they perform in a two dimensional reference frame (ie over flat terrain only). New techniques are defined for Percolation Modelling and Huygens??? Principle. Each technique is examined in a series of test cases which include computer simulations with no wind, constant wind, variable wind, variable vegetation (including patchy fuel and two fuels) and where fuel burns out. These test cases provide: (a) an incremental approach to understanding the operation of each technique; (b) a basis for comparison; and (c) verification of correctness of the technique in two dimensions. Several of the techniques are shown, by these test cases, to be equivalent. For instance, the Kourtz & O???Regan technique using a square template is equivalent to the Contact Technique, Site percolation is similar to the Heat Accumulation technique and Template percolation is similar to the Contact Technique. Overall the Huygens??? Principle techniques provide the most accurate simulations of bushfire spread.

This thesis examines techniques that provide a method of computer visualisation of bushfire spread. Existing techniques studied include, Kourtz & O???Regan, Green???s Contact, Heat Accumulation, Percolation modelling and Huygens??? Principle by Anderson et.al., French, Roberts, Richards. Many of these techniques are extended as part of a comprehensive study into how they perform in a two dimensional reference frame (ie over flat terrain only). New techniques are defined for Percolation Modelling and Huygens??? Principle. Each technique is examined in a series of test cases which include computer simulations with no wind, constant wind, variable wind, variable vegetation (including patchy fuel and two fuels) and where fuel burns out. These test cases provide: (a) an incremental approach to understanding the operation of each technique; (b) a basis for comparison; and (c) verification of correctness of the technique in two dimensions. Several of the techniques are shown, by these test cases, to be equivalent. For instance, the Kourtz & O???Regan technique using a square template is equivalent to the Contact Technique, Site percolation is similar to the Heat Accumulation technique and Template percolation is similar to the Contact Technique. Overall the Huygens??? Principle techniques provide the most accurate simulations of bushfire spread.

No description available.

Master thesis deals with usage issues of autonomous, self-sufficient and decentralized systems. In the first part convectional and experimental sources for autonomous systems are disclosed. Second chapter deals with accumulation of electrical and thermal energy and possibilities of applications. 3rd part is focused on pilot project realized for autonomous and smart systems, which were built in last years. In the 4th chapter electrical and thermal energy consumption curves are made on daily and monthly basis for 4 type objects. In the fifth part issue of autonomy is explained, and for type buildings solutions are made with additional return on investment. The last chapter is focused on calculation of thermal accumulator and briefly discloses small district heating.

The master thesis is focused on rating of buildings with almost zero energy consumption. Theoretical part summarizes general requirements on buildings with almost zero energy consumption. It also discusses other categories of buildings on terms of energy demand and influences and factors affecting the energy performance of buildings. The calculating part comparing three different construction systems of designed family house by means of energy demand with energy assessment and energy performance certificate of buildings.

The project elaborated in frame of engineering studies is submitting the study of thermal properties of holding mixtures using different types of sand. Were tested a total of 5 sands: zirkon, ŠH22, chromite, olivine and dunite. Molding compounds were tested for thermal capacity, thermal conductivity and heat accumulation. The highest heat capacity was achieved in dunite sand. The largest heat accumulation had mixture with chromite sand and the best thermal conductivity was found in a mixture with olivine sand.