A presente tese trata da análise experimental do efeito da geometria da seção transversal do canal e do desempenho de refrigerantes de reduzido GWP (Global Warming Potential) durante a ebulição convectiva em canais de reduzidas dimensões. A tese inclui ainda um estudo extenso e crítico da literatura sobre métodos de previsão da perda de pressão e do coeficiente de transferência de calor, e sobre estudos experimentais em canais não-circulares e de refrigerantes com reduzido GWP na ebulição convectiva em canais de dimensões reduzidas. Resultados para o coeficiente de transferência de calor e perda de pressão durante a ebulição convectiva foram obtidos para canais com geometrias de seção circular, quadrada e triangular para o refrigerante R134a. Nos testes utilizou-se canais com perímetros internos similares obtidos a partir da conformação de um tubo com diâmetro interno igual a 1,1 mm. No caso do canal circular, dados foram também levantados para os HFOs R1234ze(E) e R1234yf e o hidrocarboneto R600a, fluidos com reduzido GWP. Ensaios foram executados para amplas faixas de fluxos de calor e velocidades mássicas, temperaturas de saturação de 31 e 41°C e títulos de vapor entre 0 e 0,95. Aspectos relacionados aos efeitos da geometria e do fluido refrigerante foram minuciosamente investigados através da análise paramétrica dos resultados. Com base na comparação do banco de dados coletado com os métodos de previsão disponíveis na literatura, constatou-se que estes proporcionam previsões satisfatórias apenas para condições experimentais especificas. Portanto, novos métodos de previsão da perda de pressão e do coeficiente de transferência de calor foram desenvolvidos com base nos dados levantados no presente estudo. Os métodos propostos preveem satisfatoriamente o banco de dados do presente estudo e resultados independentes disponíveis na literatura. Adicionalmente, com base nos resultados levantados, verificou-se que dissipadores de calor baseados em multi-microcanais com canais de seção triangular apresentam desempenho superior comparados a dissipadores com canais quadrados e circulares. / The present thesis concerns an experimental study on the effects of cross-sectional geometry and low GWP refrigerants on the thermal-hydraulic performance for convective boiling inside micro-scale channels. Experimental results for heat transfer coefficient and pressure drop gradient during convective boiling were obtained for circular, square and triangular channels for the fluid R134a. The evaluated channels present the same external perimeter and equivalent diameters of 1.1, 0.977 and 0.835 mm, respectively. In the case of the circular geometry, experimental results were also acquired for the HFOs R1234ze(E) and R1234yf and the hydrocarbon R600a (isobutane), which are fluids with low GWP and null ODP. Experiments were performed for a wide range of heat fluxes and mass velocities, saturation temperatures of 31 and 41°C and vapor qualities up to 0.95. The experimental data were carefully analyzed and discussed based on a parametrical analysis focusing on the effect of the cross-sectional geometry and the working fluid. Subsequently, the experimental data were compared against the most quoted predictive methods from literature. In general, it was verified that none of the predictive methods were able to accurately capture the experimental trends of the overall database. So, new predictive methods for the pressure drop and heat transfer coefficient were developed based on the broad database obtained in the present study. The proposed methods provided satisfactory results not only for the experimental database used for its development, but also for independent databases collected in the literature. Additionally, based on the data obtained in the present study and a performance analysis taken into account pressure drop, heat transfer coefficient and the channel packing factor, triangular cross sectional geometry is recommended for heat sinks.

A presente tese trata da análise experimental do efeito da geometria da seção transversal do canal e do desempenho de refrigerantes de reduzido GWP (Global Warming Potential) durante a ebulição convectiva em canais de reduzidas dimensões. A tese inclui ainda um estudo extenso e crítico da literatura sobre métodos de previsão da perda de pressão e do coeficiente de transferência de calor, e sobre estudos experimentais em canais não-circulares e de refrigerantes com reduzido GWP na ebulição convectiva em canais de dimensões reduzidas. Resultados para o coeficiente de transferência de calor e perda de pressão durante a ebulição convectiva foram obtidos para canais com geometrias de seção circular, quadrada e triangular para o refrigerante R134a. Nos testes utilizou-se canais com perímetros internos similares obtidos a partir da conformação de um tubo com diâmetro interno igual a 1,1 mm. No caso do canal circular, dados foram também levantados para os HFOs R1234ze(E) e R1234yf e o hidrocarboneto R600a, fluidos com reduzido GWP. Ensaios foram executados para amplas faixas de fluxos de calor e velocidades mássicas, temperaturas de saturação de 31 e 41°C e títulos de vapor entre 0 e 0,95. Aspectos relacionados aos efeitos da geometria e do fluido refrigerante foram minuciosamente investigados através da análise paramétrica dos resultados. Com base na comparação do banco de dados coletado com os métodos de previsão disponíveis na literatura, constatou-se que estes proporcionam previsões satisfatórias apenas para condições experimentais especificas. Portanto, novos métodos de previsão da perda de pressão e do coeficiente de transferência de calor foram desenvolvidos com base nos dados levantados no presente estudo. Os métodos propostos preveem satisfatoriamente o banco de dados do presente estudo e resultados independentes disponíveis na literatura. Adicionalmente, com base nos resultados levantados, verificou-se que dissipadores de calor baseados em multi-microcanais com canais de seção triangular apresentam desempenho superior comparados a dissipadores com canais quadrados e circulares. / The present thesis concerns an experimental study on the effects of cross-sectional geometry and low GWP refrigerants on the thermal-hydraulic performance for convective boiling inside micro-scale channels. Experimental results for heat transfer coefficient and pressure drop gradient during convective boiling were obtained for circular, square and triangular channels for the fluid R134a. The evaluated channels present the same external perimeter and equivalent diameters of 1.1, 0.977 and 0.835 mm, respectively. In the case of the circular geometry, experimental results were also acquired for the HFOs R1234ze(E) and R1234yf and the hydrocarbon R600a (isobutane), which are fluids with low GWP and null ODP. Experiments were performed for a wide range of heat fluxes and mass velocities, saturation temperatures of 31 and 41°C and vapor qualities up to 0.95. The experimental data were carefully analyzed and discussed based on a parametrical analysis focusing on the effect of the cross-sectional geometry and the working fluid. Subsequently, the experimental data were compared against the most quoted predictive methods from literature. In general, it was verified that none of the predictive methods were able to accurately capture the experimental trends of the overall database. So, new predictive methods for the pressure drop and heat transfer coefficient were developed based on the broad database obtained in the present study. The proposed methods provided satisfactory results not only for the experimental database used for its development, but also for independent databases collected in the literature. Additionally, based on the data obtained in the present study and a performance analysis taken into account pressure drop, heat transfer coefficient and the channel packing factor, triangular cross sectional geometry is recommended for heat sinks.

Theoretical part of Diploma thesis deals with issues about thermal bridges and thermal connections in building structures. The Calculating part focused on the family houses with a low heat use. The results of this part are energy and financial evaluations of family house. The last part deals with the using of computer technology in engineering practice. These chapters devote about computer modeling an assembly details of passive house and family house after reconstruction (the dates of family house after reconstruction are compared with the results from experimental measurements). The last section of this Diploma thesis solves dynamic modelling of particular passive house in simulation program called Trnsys.

Ce travail porte sur l'étude de fours tournants équipés de releveurs. Ce sont des contacteurs gaz/solide largement répandus dans de nombreux secteurs industriels mettant en oeuvre des solides divisés. Cependant en raison d'une faible connaissance du fonctionnement de ces équipements notamment en matière d'écoulement ou de transfert thermique, leur utilisation repose encore beaucoup sur le savoir faire des opérateurs acquis avec le temps. Ainsi ce travail vise à fournir aux ingénieurs des outils de connaissance et d'extrapolation pour les accompagner dans les phases de dimensionnement, mais aussi d'optimisation de procédés existants, en particulier pour des fours tournants en chauffage indirect et équipés de releveurs. La première partie de cette étude porte sur l'influence des conditions opératoires sur l'hydrodynamique des solides divisés de forme et taille différentes. Pour ce faire, des procédures expérimentales pour la mesure de distribution des temps de séjours des particules solides ont été mises en oeuvres. Deux pilotes de four tournant ont été utilisés. Ces derniers ont un ratio longueur sur diamètre équivalent mais un ratio de taille de 2. L'hydrodynamique des fours a été caractérisée quantitativement à partir des résultats expérimentaux en terme de temps de séjour des solides, taux de remplissage du four ainsi que de la dispersion axiale des particules. Ces derniers ont été modélisés par analyse dimensionnelle dans un souci de généralité en prenant en compte la présence d'éléments internes (releveurs, grille) ou diaphragmes en sortie, mais aussi des paramètres opératoires tels que la vitesse de rotation du tube, son inclinaison ou le débit des particules solides. La seconde partie de cette étude s'intéresse aux processus de transfert thermique dans les fours tournants en chauffage indirect et équipés de releveurs. Cette étude repose sur la mesure des profils de température à la paroi, dans la phase gazeuse et le lit de particules solides. L'analyse de ces profils de température se focalise sur la détermination des coefficients de transfert de chaleur entre la paroi et le lit de solides d'une part, et entre la paroi et le gaz d'autre part. Une méthode d'analyse globale de système mince et un bilan global intégrant la puissance fournie pour la chauffe sont utilisés pour la détermination de ces coefficients de transfert. Les résultats obtenus permettent d'une part de mettre en évidence l'effet des releveurs ainsi que l'influence des paramètres opératoires sur ces coefficients de transfert de chaleur et d'autre part d'établir par analyse dimensionnelle des modèles pour ces derniers. Enfin, ce travail se termine par la mise en place d'un modèle dynamique simplifié de four tournant en chauffage indirect permettant la détermination des profils de température le long du four et pouvant être facilement adapté à divers procédés. / The present work addresses a fundamental study on flighted rotary kilns. They are gas-solid reactors, used in a variety of industries to process heterogeneous media. However, operating these kilns mainly relies on the know-how of operators due to insufficient fundamental understanding. The aim of this work is to provide engineers with relevant tools and models to assist in the design stage and the performance improvement of existing operating process units, in particular indirectly heated rotary kilns, inclined and equipped with lifters. In the first part, we studied the effects of operating parameters on the flow of materials of differing properties and shape. For this purpose, residence time distribution measurements were performed through experimental stimulus response tests. Two pilot-scale rotary kilns with similar length-to-diameter ratios, but a dimension ratio of about two were used in this study. We focused on the effects of lifter shape and configurations. The effects of the rotational speed, the kiln slope, the mass flow rate and the exit dam height were also analyzed. The flow of solids was quantitatively characterized primarily by the experimental mean residence time, hold-up, and axial dispersion coefficient. Using a dimensional analysis, models were established to predict the mean residence time, the filling degree and the axial dispersion coefficient, providing basic information on the kiln design, solid particle properties and operating conditions. In the second part, we studied the heat transfer mechanisms occurring in the flighted rotary kiln by measuring temperature profiles at the wall, the freeboard gas and the bulk of solids. Analysis of the temperature profiles focused on two main issues: assessment of the heat transfer coefficient between wall and gas, and assessment of the heat transfer coefficient between wall and solid particles. The lumped system analysis and a heat balance using the power supplied for the heating were applied to determine the experimental heat transfer coefficients. The effects of operating conditions and lifting flights were analyzed. Both heat transfer coefficients were then correlated through dimensional considerations. Lastly a global dynamic model mainly based on the models developed in this study can be used to determine wall, gas and bulk solids axial temperature profiles in an indirectly heated flighted rotary kiln. This global model needs to be completed with specific models related to a reaction so as to be used as a framework for the simulation of specific industrial rotary kilns.