The main idea is focused on the diagnostics of a specific hydraulic system, i.e. sensing the physical quantities of the hydraulic circuit with a tank and a centrifugal pump driven by an asynchronous motor. It is a system of pipes connected to the pump, where due to its work it creates a water flow and a pressure increase. In practice, this issue is also addressed in the energy and nuclear industries. Primary circuits in some cases cannot be designed or modified to be able measure locally the pressure value. It is necessary to measure this quantity indirectly - from the motor currents. The main idea of the work is to diagnose the system by an indirect method - specifically to detect the state of the hydraulic circuit (pressure, flow) from the values that we are able to measure and detect damage in advance. In the second part of the thesis is the application of the parts of a specific hydraulic system in the simulation environment MATLAB Simulink. The model of the hydraulic circuit contains mathematical-physical relations that simulate the course of the mentioned experiment. The results of the simulation are compared with the results of the experiment. The model also investigates the simulation of a fault condition, when we supply pressure pulsations to the hydraulic circuit. It is these changes in the hydraulic part that affect the characteristics of the pump and the asynchronous motor, so we are able to diagnose this system.

This master’s thesis deals with the design of the manipulator for rotating objects, especially workpieces, semifinished products, or complete products around horizontal axis. It’s the manipulator for objects where is needed change orientation during production process. This thesis describes step by step construction of individual components of the manipulator and calculations of propulsive units. At the beginning the conveyor roller with propulsive unit is designed. The next step is construction of scissor lift table and choice of the propulsive unit. There is also made FEM analysis for the scissor mechanism. The next unit is aimed to the construction and computation of rotating and telescopic jaw. Then hydraulic circuit with computation of the propulsive unit is designed. As the final step the appropriate type of sensors are chosen and the step diagram of the manipulator is made. The manipulator is designed in the 3D model program and there are also made some assembly drawings.

The aim of this thesis is to design a conceptual self-propelled forestry winch for removing and skidding in thinning steep terrain. The thesis contains patent search of design solutions the machines using in the field, conceptual design of structural layout, assembly drawing overall concept of the equipment and drawing concept chassis design.

This diploma thesis deals with the design of the hydraulic puller. Furthermore, the diploma thesis presents the analysis of possible design solutions. It includes processing the selected design of the hydraulic puller with parameters: maximum pushing force 50 kN, speed of work movement 0,05 m.s-1. The analysis by using finite element method (FEM) is made. The next part of thesis includes the design of hydraulic circuit of puller. In the last part of thesis there is the design for replacement of hydraulic puller by mechanical systems.

This Master’s thesis deals with design of hydraulic circuit of laboratory of the Slovak university of agriculture in Nitra with focus on project of its machine part. The thesis includes a description of current condition of the laboratory and a list of investor’s requirements. The main task of this thesis is to complete a project documentation which will be used to build a hydraulic circuit in laboratoty of Department of Water Resources and Environmental Engineering under Faculty of Horticulture and Landscape Engineering of the Slovak University of Agriculture in Nitra. The hydraulic circuit is based on recirculation concept. It consists of an underground water storage tank, stainless steel distribution pipes, measuring flumes and centrifugal submersible pumps. The hydraulic circuit will serve employees of the university for their scientific and educational purposes. Important parts of this thesis are hydrotechnical calculations and circuit control visualisations. The final design is based on a series of negotiations with the investor and suits his requirements.

This dissertation thesis is concerning with an interaction between mobile working machines and rolled surfaces. Machines and their constructions parts behavior were observed. There are some machines that can change state of surface. And due to these change of surface the machine is in different conditions for drive and also for works. The interaction of working machines and rolled surfaces was categorized in this work and for each category here is a methodic work flow for solution of various cases. Three examples are described in this work. Some simulating programs were used for all cases and therefore there is a methodic work flow for creating and simulating of models. Three described examples include a complex solution of hydraulic drive for vibration exciter of vibration roller, small cleaner of canalizations with aim on load case to frame of this cart. The third example describes solution of undercarriage frames of agricultural semi-trailers. This example is the most extensive chapter from this work due to including of marketing research at the beginning of development and also verification of simulated results with results from real prototype tests at the end of development of these undercarriage frames.

This diploma thesis deals with the design of hydraulic cleaning machine of fine screens located in the supply channel of small hydropower plant. The part of this thesis is also the design of hydraulic circuit and strength analysis using finite element method. The thesis also deals with the optimal debris removal. The thesis is attached by drawing documentation of selected parts of the mechanism.

This thesis presents a proposal of newly designed concept for travel hydraulic circuit of vibratory single drum roller ASC 110. The maximum machine gradeability was chosen as the main parameter for hydraulic circuit proposal. After selecting the new hydraulic travel concept, suitable hydraulic components have been selected. Length and local losses for two different machine speeds were calculated for sufficient hydraulic circuit design. Hydraulic losses have also been calculated for use in different climatic conditions. A new machine cooling concept has also been proposed. Heating and cooling curves of hydraulic circuit were calculated. For the purpose of comparing gradeability and energy balance of the newly designed travel concept compared to the existing one currently in mass production, both machines were fitted with measuring points. On both machines were measured for example, pressure, flow and temperature in each hydraulic circuit branch and others. From the time dependencies of the above-mentioned parameters it was possible to determine the energy efficiency of the newly designed concept. To assess the maximum gradeability, the slope of the hill was measured. Comparing the two machines, it has been found that the two hydraulic circuit solution has significantly improved traction properties in demanding machine applications, especially when driving uphill and downhill. This concept also affects less fuel consumption and places less demand on the hydraulic oil cooler due to its energy efficiency.

This diploma thesis describes mechanical design of mobile construction crane, specified for moving Silka bricks of weight 200 kg. Thesis contains constructing solution of steel frame - boom, column and chassis. Standard purchased components are also defined in this thesis - hydraulic circuits, el. pulley assembly and wheels. Last part of thesis verifies sufficient safety of designed frame using Finite element method. Output of this thesis are mechanical drawings of welded parts of steel frame and assembly drawing of entire crane.

Master’s thesis presents the machine - technological design of the hydraulic circuit of laboratory, which is part of project documentation. The main part’s of thesis are hydraulic circle and hydraulic measuring flume and control algorithm of pumping stations and visualization of control of hydraulic circuit to display.