Thesis--Wisconsin. / M.S., Mechanical Engineering. Includes bibliographical references (leaf 188).

Thesis (MScIng)--University of Stellenbosch, 2005. / Bibliography. Also available via the Internet.

Thesis (MScEng (Mechanical and Mechatronic Engineering))--University of Stellenbosch, 2005. / The two-dimensional flow-field through the stationary blade row of a radial inflow turbine in a torque converter was analysed by means of a potential flow model and a viscous flow model. The purpose was to compare the accuracy with which the two flow models predict the flow field through the static turbine blade row. The freestream turbulence level necessary to optimise the accuracy of the viscous flow model was also investigated. A first order source-vortex panel method with flat panels was used to apply the potential flow model. A radial inflow freestream was used. It was found that the stator blade row directly upstream of the turbine had to be included in the analysis to direct the flow at the turbine inlet. Even then the panel method did not satisfactorily predict the pressure distribution on a typical blade of the static 2nd turbine blade row. A two-dimensional viscous flow model gave excellent results. Furthermore, the two-dimensional viscous flow model was simple to set up due to the fact that symmetry boundary conditions could be used. This facilitated useful predictions of the salient features of the two-dimensional flow through the middle of the radial turbine blade row.

Indiana University-Purdue University Indianapolis (IUPUI) / A gearless hydraulic wind energy transfer system utilizes the hydraulic power transmission principles to integrate the energy of multiple wind turbines in a central power generation location. The gearless wind power transfer technology may replace the current energy harvesting system to reduce the cost of operation and increase the reliability of wind power generation. It also allows for the integration of multiple wind turbines to one central generation unit, unlike the traditional wind power generation with dedicated generator and gearbox. A Hydraulic Transmission (HT) can transmit high power and can operate over a wide range of torque-to-speed ratios, allowing efficient transmission of intermittent wind power. The torque to speed ratios illustrates the relationship between the torque and speed of a motor (or pump) from the moment of start to when full-load torque is reached at the manufacturer recommended rated speed. In this thesis, a gearless hydraulic wind energy harvesting and transfer system is mathematically modeled and verified by experimental results. The mathematical model is therefore required to consider the system dynamics and be used in control system development. Mathematical modeling also provided a method to determine the losses of the system as well as overall efficiency. The energy is harvested by a low speed-high torque wind turbine connected to a high fixed-displacement hydraulic pump, which is connected to hydraulic motors. Through mathematical modeling of the system, an enhanced understanding of the HTS through analysis was gained that lead to a highly efficient hydraulic energy transmission system. It was determined which factors significantly influenced the system operation and its efficiency more. It was also established how the overall system operated in a multiple wind turbine configuration. The quality of transferred power from the wind turbine to the generator is important to maintaining the systems power balance, frequency droop control in grid-connected applications, and to ensure that the maximum output power is obtained. A hydraulic transmission system can transfer large amounts of power and has more flexibility than a mechanical and electrical system. However high-pressure hydraulic systems have shown low efficiency in wind power transfer when interfaced with a single turbine to a ground-level generator. HT’s generally have acceptable efficiency at full load and drop efficiency as the loading changes, typically having a peak around 60%. The efficiency of a HT is dependent on several parameters including volumetric flow rate, rotational speed and torque at the pump shaft, and the pressure difference across the inlet and outlet of the hydraulic pump and motor. It has been demonstrated that using a central generation unit for a group of wind turbines and transferring the power of each turbine through hydraulic system increases the efficiency of the overall system versus one turbine to one central generation unit. The efficiency enhancement depends on the rotational speed of the hydraulic pumps. Therefore, it is proven that the multiple-turbine hydraulic power transfer system reaches higher efficiencies at lower rotational speeds. This suggests that the gearbox can be eliminated from the wind powertrains if multiple turbines are connected to the central generation unit. Computer simulations and experimental results are provided to quantify the efficiency enhancements obtained by adding the second wind turbine hydraulic pump to the system.