Ce travail de thèse est principalement axé sur la création d'un nouveau réacteur biocompatible permettant l'encapsulation et l'étude de bactéries électroactives. Ce compartiment de taille millimétrique, réalisé par coextrusion, est une capsule à coeur liquide possédant une membrane d'hydrogel conducteur. La synthèse de ce bioréacteur a nécessité la formulation d'un hydrogel composite alginate/nanotubes de carbone en deux étapes. Une première étape rapide crée la matrice d'hydrogel par diffusion d'ions divalents dans un mélange Alginate/nanotubes de carbone. Une seconde étape, plus lente, permet la dialyse du tensioactif stabilisant les nanotubes et la création d'un réseau conducteur au sein de l'hydrogel pour des pourcentages massiques de charges supérieurs à 0,5 %. Ce matériau composite présente alors une conductivité macroscopique d'environ 0,1 S/m. Une étude du matériau par voie électrochimique permet entre autres de suivre cinétiquement la connexion des nanotubes de carbone. Des bactéries peuvent adhérer à la surface de cet hydrogel composite. Nous démontrons qu'il est alors possible de mesurer l'électroactivité d'un biofilm bactérien développé sur la paroi interne d'une capsule conductrice. Ce nouveau compartiment biocompatible ouvre la voie vers le développement d'un outil de criblage pour la sélection de bactéries électroactives mais offre également des perspectives innovantes pour la fabrication de piles bactériennes. / This work focuses on the creation of a new biocompatible reactor allowing the encapsulaion and the study of electroactive bacteria. Made by co-extrusion, this millimeter bioreactor is a liquid core capsule with a conducting hydrogel membrane. To create such an object, we formulate a composite hydrogel of alginate/carbon nanotubes in two steps. The first step is rapid and creates the hydrogel matrix by diffusion of divalent ions inside the alginate/carbon nanotubes mix. The second step is slower and permits the dialysis of the surfactant used to stabilize the nanotubes. During this last step, the carbone nanotube network percolates, creating a conducting network in the hydrogel for sufficient nanotube contents (above 0.5 %). This composite material has a macroscopic conductivity around 0.1 S/m. An electrochemical study of this material allows to follow the nanotube connection inside the hydrogel. Bacteria can adhere on this composite hydrogel. Then, we demonstrate that the electroactivity of a biofilm developped on the inner side of the conductive capsule shell can be measured. This new biocompatible and electron-conducting compartment opens the way towards the development of a screening tool for the selection of electroactive bacteria but also brings innovative perspectives in the field of microbial fuel cells fabrication.

<p>In the presented work, immunosensors for detection of Aflatoxin B1 based on different immobilization platforms were studied. Synthesis of an electroactive hydrogel was also carried out. Aflatoxins are a group of mycotoxins that have deleterious effects on humans and are produced during fungal infection of plants or plant products. Electrochemical immunosensor for the determination of Aflatoxin B1 (AFB1) was developed with anti-aflatoxin B1 antibody immobilized on Pt electrodes modified with polyaniline (PANi) and polystyrene sulphonic acid (PSSA). Impedimetric analysis shows that the electron transfer resistances of Pt/PANi-PSSA electrode, Pt/PANi-PSSA/AFB1-Ab immunosensor and Pt/PANi-PSSA/AFB1-Ab incubated in BSA were 0.458, 720 and 1066 k&Omega / , respectively. These results indicate that electrochemical impedance spectroscopy (EIS) is a suitable method for monitoring the change in electron-transfer resistance associated with the immobilization of the antibody. Modelling of EIS data gave equivalent circuits which showed that the electron transfer resistance increased from 0.458 k&Omega / for Pt/PANi-PSSA electrode to 1066 k&Omega / for Pt/PANi-PSSA/AFB1-Ab immunosensor, indicating that immobilization of the antibody and incubation in BSA introduced an electron transfer barrier. The AFB1 immunosensor had a detection limit of 0.1 mg/L and a sensitivity of 869.6 k &Omega / L/mg.</p>

<p>In the presented work, immunosensors for detection of Aflatoxin B1 based on different immobilization platforms were studied. Synthesis of an electroactive hydrogel was also carried out. Aflatoxins are a group of mycotoxins that have deleterious effects on humans and are produced during fungal infection of plants or plant products. Electrochemical immunosensor for the determination of Aflatoxin B1 (AFB1) was developed with anti-aflatoxin B1 antibody immobilized on Pt electrodes modified with polyaniline (PANi) and polystyrene sulphonic acid (PSSA). Impedimetric analysis shows that the electron transfer resistances of Pt/PANi-PSSA electrode, Pt/PANi-PSSA/AFB1-Ab immunosensor and Pt/PANi-PSSA/AFB1-Ab incubated in BSA were 0.458, 720 and 1066 k&Omega / , respectively. These results indicate that electrochemical impedance spectroscopy (EIS) is a suitable method for monitoring the change in electron-transfer resistance associated with the immobilization of the antibody. Modelling of EIS data gave equivalent circuits which showed that the electron transfer resistance increased from 0.458 k&Omega / for Pt/PANi-PSSA electrode to 1066 k&Omega / for Pt/PANi-PSSA/AFB1-Ab immunosensor, indicating that immobilization of the antibody and incubation in BSA introduced an electron transfer barrier. The AFB1 immunosensor had a detection limit of 0.1 mg/L and a sensitivity of 869.6 k &Omega / L/mg.</p>

Philosophiae Doctor - PhD / In the presented work, immunosensors for detection of Aflatoxin B1 based on different immobilization platforms were studied. Synthesis of an electroactive hydrogel was also carried out. Aflatoxins are a group of mycotoxins that have deleterious effects on humans and are produced during fungal infection of plants or plant products. Electrochemical immunosensor for the determination of Aflatoxin B1 (AFB1) was developed with anti-aflatoxin B1 antibody immobilized on Pt electrodes modified with polyaniline (PANi) and polystyrene sulphonic acid (PSSA). Impedimetric analysis shows that the electron transfer resistances of Pt/PANi-PSSA electrode, Pt/PANi-PSSA/AFB1-Ab immunosensor and Pt/PANi-PSSA/AFB1-Ab incubated in BSA were 0.458, 720 and 1066 kΩ, respectively. These results indicate that electrochemical impedance spectroscopy (EIS) is a suitable method for monitoring the change in electron-transfer resistance associated with the immobilization of the antibody. Modelling of EIS data gave equivalent circuits which showed that the electron transfer resistance increased from 0.458 kΩ for Pt/PANi-PSSA electrode to 1066 kΩ for Pt/PANi-PSSA/AFB1-Ab immunosensor, indicating that immobilization of the antibody and incubation in BSA introduced an electron transfer barrier. The AFB1 immunosensor had a detection limit of 0.1 mg/L and a sensitivity of 869.6 kΩL/mg. / South Africa

Philosophiae Doctor - PhD / In the presented work, immunosensors for detection of Aflatoxin B1 based on different immobilization platforms were studied. Synthesis of an electroactive hydrogel was also carried out. Aflatoxins are a group of mycotoxins that have deleterious effects on humans and are produced during fungal infection of plants or plant products. Electrochemical immunosensor for the determination of Aflatoxin B1 (AFB1) was developed with anti-aflatoxin B1 antibody immobilized on Pt electrodes modified with polyaniline (PANi) and polystyrene sulphonic acid (PSSA). Impedimetric analysis shows that the electron transfer resistances of Pt/PANi-PSSA electrode, Pt/PANi-PSSA/AFB1-Ab immunosensor and Pt/PANi- PSSA/AFB1-Ab incubated in BSA were 0.458, 720 and 1066 kΩ, respectively. These results indicate that electrochemical impedance spectroscopy (EIS) is a suitable method for monitoring the change in electron-transfer resistance associated with the immobilization of the antibody. Modelling of EIS data gave equivalent circuits which showed that the electron transfer resistance increased from 0.458 kΩ for Pt/PANi-PSSA electrode to 1066 kΩ for Pt/PANi- PSSA/AFB1-Ab immunosensor, indicating that immobilization of the antibody and incubation in BSA introduced an electron transfer barrier. The AFB1 immunosensor had a detection limit of 0.1 mg/L and a sensitivity of 869.6 k ΩL/mg. In the second platform an immunosensor based on gold nanoparticles (AuNP) and polythionine-modified glassy carbon electrode (GCE) for the determination of aflatoxin B1 (AFB1) was developed. Aflatoxin B1-BSA conjugate was immobilised on the modified GCE. Horseradish peroxidase (HRP) or Bovine serum albumin (BSA) were used to block sites against non-specific binding of the AFB1- conjugate with other compounds such as the salts used in preparing the buffer when the antibody interacts with the AFB1 conjugate and free AFB1. Competition reaction was allowed to take place between the free AFB1 and AFB1-conjugate for the binding sites of the anti-aflatoxin B1 antibody. Cyclic voltammetry (CV) was employed to characterize the electrochemical properties of the modified process. The peak separation of the immunosensor (ΔEp) was 62 mV indicating a quasi reversible process. Differential pulse voltammetry (DPV) was used to monitor the analytical signal. The response decreased with an increase in AFB1 concentration in the range of 0.6-2.4 ng/mL with a limit of detection of 0.07 and 0.16 ng/mL for HRP and BSA blocked immunosensors respectively. Significantly the low detection limit of 0.07 ng/mL is within the limits set by worl health organization (WHO) for AFB1 and its derivatives which is 2 ng/mL The proposed method eliminates the use of secondary antibody enzymatic labels. Synthesis and characterization of (p-(HEMA)-polyaniline hydrogels were investigated. The hydrogels were synthesized using: 2-Hydroxyeththyl methacrylate (HEMA), N-Tris (hydroxymethyl) methyl] acrylamide, 3- Sulfopropyl methacrylate potassium salt, Tetraethylene glycol diacrylate, Poly-(2- hydroxyethyl methacrylate), 2, 2-Dimethoxy-2-phenylacetophenone and aniline by UV irradiation. Two sets of the hydrogels were prepared using water / 1, 3, 3, 3-(tetramethyl butyl phenyl polyethylene glycol [Triton X-100] and water / ethylene glycol as the solvent. Scanning electron microscopy (SEM) revealed a more uniform pore size when Triton X 100 (TX-100 HG) was used as compared to ethylene glycol (EG-HG). Thermogravimetric analysis (TGA) showed that both hydrogels were stable up to 270 oC. Fourier transform-Infra red (FTIR) spectrum confirmed the incorporation of polyaniline (PANi) and HEMA in the composite. Electrochemical properties of the hydrogels evaluated using Cyclic Voltammetry and Electrochemical Impedance Spectroscopy (EIS) demonstrated the electroactivity and conductivity.