Electric grid as we now it has been without significant change for a long time. Along with the human population grows demand for electricity, which leads to need to create more energy. Bigger interest is in ecology and use of renewable sources, although these do not have constant output which often stresses the grid. These problems are to be solved by smart grids. Smart grids are capable of adjusting energy generation to immediate demand including renewable sources to compensate energy fluctuations in grid. They provide demand response and other applications interesting for end users. Smart grids are combination of achievements in energy, informatics and communication technology. Communication, which is key part of smart grids, has to met certain requirements and can be executed by various technologies. There are described various communication technologies and a design concept of data communication in this paper.

Wireless networks provide communications to fixed, portable and mobile users and offer substantial flexibility to both end-users and service providers. Current cellular/PCS networks do not offer cost effective high data rate services for applications, such as, telematics, traffic surveillance and rescue operations. This research studies the feasibility and behavior of outdoor implementation of low-cost wireless LANs used for high mobility telematics and traffic surveillance. A multi-hop experimental wireless data network is designed and tested for this purpose. Outdoor field measurements show the wireless coverage and throughput patterns for static and mobile users. The results suggest that multi-hop wireless LANs can be used for high mobility applications if some protocols are improved. / Master of Science

Made available in DSpace on 2014-12-17T14:56:05Z (GMT). No. of bitstreams: 1 RicardoCOM_DISSERT.pdf: 2871437 bytes, checksum: ca804782bf10029c3e31983e4917ea6a (MD5) Previous issue date: 2012-04-18 / Conselho Nacional de Desenvolvimento Cient?fico e Tecnol?gico / This work presents a theoretical and experimental analysis about the properties of microstrip antennas with integrated frequency selective surfaces (Frequency Selective Surface - FSS). The integration occurs through the insertion of the FSS on ground plane of microstrip patch antenna. This integration aims to improve some characteristics of the antennas. The FSS using patch-type elements in square unit cells. Specifically, the simulated results are obtained using the commercial computer program CST Studio Suite? version 2011. From a standard antenna, designed to operate in wireless communication systems of IEEE 802.11 a / b / g / n the dimensions of the FSS are varied to obtain an optimization of some antenna parameters such as impedance matching and selectivity in the operating bands. After optimization of the investigated parameters are built two prototypes of microstrip patch antennas with and without the FSS ground plane. Comparisons are made of the results with the experimental results by 14 ZVB network analyzer from Rohde & Schwarz ?. The comparison aims to validate the simulations performed and show the improvements obtained with the FSS in integrated ground plane antenna. In the construction of prototypes, we used dielectric substrates of the type of Rogers Corporation RT-3060 with relative permittivity equal to 10.2 and low loss tangent. Suggestions for continued work are presented / Este trabalho apresenta uma investiga??o te?rica e experimental sobre as propriedades das antenas de microfita integradas com superf?cies seletivas em frequ?ncia (Frequency Selective Surface FSS). A integra??o se d? por meio da inser??o da FSS no plano de terra da antena patch de microfita. Essa integra??o visa a melhoria de algumas caracter?sticas das antenas como, por exemplo, ganho, largura de banda, dentre outras. As FSS utilizam elementos do tipo patch quadrado nas c?lulas unit?rias. Especificamente, os resultados simulados s?o obtidos utilizando-se o programa computacional comercial CST Studio Suite? vers?o 2011. A partir de uma antena padr?o, projetada para operar em sistemas de comunica??es sem fio dos padr?es IEEE 802.11 a/b/g/n, as dimens?es da FSS s?o variadas de forma a obter uma otimiza??o de alguns par?metros da antena, como casamento de imped?ncia e seletividade nas bandas de opera??o. Ap?s a otimiza??o dos par?metros investigados, s?o constru?dos dois prot?tipos de antenas patch de microfita com e sem a FSS no plano de terra. S?o feitas compara??es dos resultados simulados com os resultados experimentais obtidos pelo analisador de rede ZVB 14 da Rohde & Schwarz?. A compara??o visa validar as simula??es efetuadas e mostrar as melhorias obtidas com a FSS integrada no plano de terra da antena. Na constru??o dos prot?tipos, foram utilizados substratos diel?tricos da Rogers Corporation do tipo RT-3060 com permissividade relativa igual a 10,5 e baixa tangente de perdas. Sugest?es de continuidade do trabalho s?o apresentadas