Introduction: Glass ionomers are available in sets of powder and liquid constituents, which are dispensed using a scoop and dropper bottle system prior to hand-mixing by an operator. Glass ionomers are also available in capsulated form, which is mixed in a suitable mechanical mixing machine prior to clinical use. Capsulation enables uniform proportioning of the powder and liquid. In this context, mixing time will be correct as an automated process is utilised, resulting in a cement mixture that is optimal and reproducible, with minimal air entrapment. Manufacturers promote the capsulated form as being time saving, and easy to dispense, with more accurate adaptation because of the use of an applicator to place the material. Aim: The aim of this in vitro study was to compare the performance of hand-mixed glass ionomer materials with their capsule-mixed equivalents in terms of compressive strength, surface hardness and porosity. Materials and Methods: Four groups of 10 cylindrical specimens were manufactured for each of the four specified hand-mixed posterior glass ionomers for each test that was performed: Riva Self Cure (RSCH) (SDI Limited); GC Fuji IX GP (FIXH) (GC Corp); Ketac Universal (KUH) (3M ESPE) and Ketac Molar Easymix (KMH) (3M ESPE). Similarly, four groups of 10 cylindrical specimens were manufactured for each of the four equivalent capsule-mixed posterior glass ionomers for each test that was performed: Riva Self Cure (RSCC) (SDI Limited); GC Fuji IX GP (FIXC) (GC Corp); Ketac Universal Aplicap (KUC) (3M ESPE) and Ketac Molar Aplicap (KMC) (3M ESPE). The compressive fracture strength of each specimen was determined after 24 hours using a universal testing apparatus. A compressive load of 1 mm/min was applied to the 6 mm long axis of each specimen. The load to fracture was recorded and the compressive fracture strength was calculated. Within one hour after compressive strength testing, a selection of fragments from each specimen was examined by Scanning Electron Microscope (SEM). Fragments were vacuum gold-sputter-coated prior to SEM examination. The fragments were observed at an operating voltage of 10kV, and over a range of magnifications to investigate crack propagation. The surface hardness of each specimen was measured with a digital micro-hardness tester with Vickers diamond indenter. The indenter was set at a load of 500mN at five predetermined regions of each specimen, with a dwell-time of five seconds. The five readings for each specimen were computed and the mean VHN in N/mm2 for each specimen was determined. Each specimen was observed and analysed for porosity using Micro-CT. Three-dimensional reconstructions were made of each specimen and the number of voids per volume (mm3) of specimen, the total volume of voids (mm3) per volume of specimen and the volume percentage of voids per volume of specimen were calculated. Results: RSCH and RSCC showed statistically significant differences when compressive strength (p=0.027), volume of voids (p=0.005) and volume percentage of voids (p=0.005) were compared. No statistically significant differences were found between RSCH and RSCC when surface hardness (p=0.124) and number of voids (p=0.221) were compared. When compressive strength (p=0.254) and number of voids (p=0.210) of FIXH and FIXC were compared, no statistically significant differences were found. Statistically significant differences were found when surface hardness (p=0.031), volume of voids (p<0.001) and volume percentage of voids (p<0.001) of FIXH and FIXH were compared. No statistically significant difference was found when compressive strength (p=0.090) of KUH and KUC were compared. Statistically significant differences were found when surface hardness (p<0.001), number of voids (p<0.001), volume of voids (p=0.004) and volume percentage of voids (p=0.004) of KUH and KUC were compared. Statistically significant differences were found between KMH and KMC when compressive strength (p<0.001), surface hardness (p=0.006), number of voids (p=0.001), volume of voids (p=0.010) and volume percentage of voids (p=0.010) were compared. Conclusion: The current study suggests that RSCC is more advantageous for clinical use compared to RSCH. The results as to whether the capsule-mix or the hand-mix product are superior for the examined properties for GC Fuji IX GP are inconclusive. KUC surpassed KUH in tests performed and is therefore recommended for clinical use. KMC out-performed KMH in all tests conducted, and is therefore advocated for use in clinical practice. / Dissertation (MSc)--University of Pretoria, 2019. / Community Dentistry / MSc / Unrestricted

No description available.

No description available.

No description available.

The focus of this dissertation was to investigate the influence of sidechain structure and sidechain content on the morphology and physical properties of perfluorosulfonic acid ionomer (PFSA) membranes. One of the primary objectives was to characterize the thermomechanical relaxations for short sidechain PFSAs developed by 3M and Solvay, as well as a new multi-acid sidechain perfluoroimide acid ionomer (PFIA) from 3M. Partial neutralization experiments played a key role in systematically manipulating the strength of the electrostatic interactions between proton exchange groups on each sidechain, leading to the elucidation of the molecular-level motions associated with multiple thermal relaxations observed by dynamic mechanical analysis (DMA). Particularly, 3M PFSA and Solvay Aquivion lack an observable β-relaxation in the sulfonic acid-form that is observed in the long sidechain PFSA, Nafion. By varying the strength of the physically-crosslinked network through exchanging the proton on the sulfonic acid groups for large counterions, we were able to conclude that the shorter sidechain length and increase in ion content in the 3M PFSA and Solvay Aquivion serves to restrict the mobility of the polymer backbone such that the onset of segmental motions of the main chains is not observed at temperatures below the α-relaxation temperature, where destabilization of the physically crosslinked network occurs. As a complementary technique to DMA for probing the relaxations in PFSAs, we introduced a new pretreatment method for differential scanning calorimetry (DSC) measurements that uncover a thermal transition in H+-form 3M PFSA, Aquivion, and Nafion membranes. This thermal transition was determined to be of the same molecular origin as the dynamic mechanical α-relaxation temperature in H+-form PFSAs, and the β-relaxation temperature in tetrabutylammonium (TBA+)-form PFSAs. The thermomechanical relaxations in multi-acid sidechain 3M PFIA were also investigated. Interestingly, the additional acidic site on PFIA led to unexpected differences in thermal and mechanical properties, including the appearance of a distinct glass transition temperature otherwise not seen in PFSA ionomers. We utilized small-angle X-ray scattering (SAXS) studies to probe the differences in aggregate structure between the PFIA and PFSA membranes in order to uncover the morphological origin of the anomalous thermomechanical behavior in PFIA membranes. Larger aggregate structures for PFIA, compared to PFSA, incorporate intervening fluorocarbon chains within the aggregate, resulting in increased spacing between ions that reduce the collective electrostatic interactions between ions such that the onset of chain mobility occurs at lower temperatures than the α-relaxation for PFSA. The SAXS profiles of PFSAs showed two scattering features resulting from scattering between crystalline domains and ionic domains distributed throughout the polymer matrix. In order to fit the "ionomer peak" to models used for the PFIA and PFSA aggregate structure determination, we presented a method of varying the electron density of the ionic domains by using different alkali metal counterions as a tool to make the intercrystalline feature indistinguishable. This allows for isolation of the ionomer peak for better fits to scattering models without any interference from the intercrystalline peak. Lastly, an investigation of annealing PFSAs of different sidechain structures in the tetramethylammonium (TMA+) counterion form above their α-relaxation showed a profound crystalline-like ordering of the TMA+ counterions within the ionic domains. This ordering is maintained after reacidification and leads to improved proton conductivity, which indicates that this method can be used as a simple processing method for obtaining improved morphologies in proton exchange membranes for fuel cell applications. / Doctor of Philosophy / Hydrogen fuel cells offer an environmentally friendly, high efficiency method for powering vehicles, buildings, and portable electronic devices. At the center of a hydrogen fuel cell is a polymer membrane that contains ionic functionalities, which conduct hydrogen ions (protons) from the anode to the cathode while preventing conduction of electrons. The electrons travel through an external circuit to produce electricity, while the protons travel through the polymer membrane and meet with oxygen on the other side to produce water, the only byproduct of a hydrogen fuel cell. The efficiency of this process relies on the ability of the polymer membrane to conduct protons, and the lifetime of a fuel cell depends on the mechanical stability of this membrane. Perfluorosulfonic acid ionomers are good candidates for use as polymer membranes in hydrogen fuel cells due to their Teflon backbone that provides mechanical stability and their sulfonic acid functionalities that form channels for proton conduction. In this work, we probe the structure-property relationships of different perfluorosulfonic acid ionomers for use as fuel cell membranes. We focus on thermal analysis techniques to develop a fundamental understanding of the effect of chemical structure and sulfonic acid content on the temperature-induced mobility of the polymer chains in these ionomers. This mobility at elevated temperatures can be utilized to rearrange the morphological structure of perfluorosulfonic acid ionomer membranes in order to enhance proton conductivity and mechanical integrity.

Conventional studies of ionomers have focused on ionomers bearing monovalent carboxylate or sulfonate pendant ions. There are relatively fewer studies on ionomers containing multivalent pendant ions, such as divalent phosphonate. In this dissertation, poly(ethylene terephthalate) (PET) and polystyrene ionomers with divalent phosphonate pendant ions have been synthesized, and the influence of divalent phosphonate pendant ions on the structure-morphology-property relationship has been compared to the ionomers with monovalent sulfonate pendant ions. The phosphonate groups generated a stronger physically crosslinked network in phosphonated ionomers as compared to sulfonated analogues. Higher plateau modulus, longer relaxation time, and significantly higher zero-shear viscosity were noted for phosphonated ionomers by a dynamic melt rheology study. Compared to the ionic aggregates generated from sulfonate groups, larger ionic aggregates with associated phosphonate groups have been observed. Furthermore, phosphonated ionomers displayed significantly higher glass transition temperatures than sulfonated ionomers. Ionomers have proven to be attractive, interfacially active compatibilizers for a number of polymer blend systems because of specific interactions that may develop between the ionic groups and complementary functional groups on other polar polymers within the blends. The successful compatibilization of polyester/polyamide blends (prepared by solution mixing and melt blending methods) using phosphonated PET ionomers as a minor-component compatibilizer has been demonstrated. The phase-separated polyamide domain dimension decreased with increasing mol % phosphonated monomers and this decrease was attributed to the specific interactions between the ionic phosphonate groups on the polyester ionomer and the amide linkages of polyamide. More importantly, the divalent phosphonate pendant ions are more effective at compatibilizing polyester/polyamide blends in comparison to the monovalent sulfonate pendant ions. Phosphonated PET ionomer-compatibilized polyester/polyamide blends required 6 times fewer ionic monomers to achieve domain dimension < 1 μm as compared to sulfonated PET-containing blends. Deep eutectic solvents (DES) have been reported to be the next generation solvents due to the superior biocompatibility, biodegradability, and sustainability as compared to ionic liquids. Two types of deep eutectic solvents, choline chloride : malic acid (ChCl:MA) and L-arginine : levulinic acid (Arg:LA), have been demonstrated as effective plasticizers for poly(vinyl alcohol) (PVOH) films. The plasticization effects on the properties of PVOH films were evidenced by lower crystallizability and improved film ductility. In addition, ChCl:MA deep eutectic solvent was more effective in plasticizing PVOH as compared to propylene glycol, one of the most widely studied alcohol-type plasticizers. From an applied perspective, DES-plasticized PVOH film is a promising candidate in the packaging market of heath-related products. / Doctor of Philosophy / Non-covalent interactions play an important role on the structure-morphology-property relationship of polymeric materials. Divalent phosphonate pendant ions provide interesting effects on the properties of ionomer and polymer blends as compared to the monovalent sulfonate pendant ions. Ionomers containing phosphonate pendant ions exhibit a significantly stronger physically crosslinked network as compared to sulfonated ionomers. Compared to monovalent sulfonate groups, the divalent phosphonate groups are more effective at compatibilizing polymer blends. Furthermore, the compatibilized poly(ethylene terephthalate)-based blends exhibit improved optical and oxygen barrier properties compared to the base blend without compatibilizer, signifying potential benefits in packaging industry. Poly(vinyl alcohol) is one of the most widely used packaging materials for food, medicine, detergent, etc. The incorporation of deep eutectic solvents as plasticizers significantly improved film ductility. In addition, the plasticization effect for choline chloride-based deep eutectic solvent is more profound than one of the most widely studied alcohol-type plasticizers, propylene glycol. The effective plasticization of poly(vinyl alcohol) using deep eutectic solvents confirmed the potential for future applications in the packaging market of health-related product.

The focus of this research project was to investigate morphological and mechanical properties of both extruded and dispersion-cast Nafion® membranes. The project can be divided into three primary objectives; obtaining a fundamental understanding of the glass transition temperature of Nafion®, determining the effect of thermal annealing treatments on the morphology and mechanical properties of dispersion-cast Nafion®, and examination of dispersion-cast Nafion® subjected to an ex-situ, Fenton's chemical degradation test. Nafion®, a perfluorosulfonate ionomer, is considered a commercially successful semi-crystalline ionomer with primary applications in chlor-alkali cells and proton exchange membrane fuel cells. With the aid of dynamic mechanical analysis (DMA) and dielectric spectroscopy (DS), we were able to provide definitive evidence for a genuine glass transition in Nafion®. DMA of Nafion® samples that were partially neutralized with tetrabutylammonium counterions showed a strong compositional dependence suggesting that the β-relaxations of H+-form Nafion® and the neutralized ionomers have the same molecular origin with respect to backbone segmental motions. Building upon our previous studies of the molecular and morphological origins of the dynamic mechanical relaxations of Nafion® neutralized with a series of organic ions, the glass transition temperature of H+-form Nafion® is now confirmed to be the weak β-relaxation centered at -20 °C. Dielectric spectra also showed this transition from the perspective of dipole relaxation. The signature of cooperative long range segmental motions in dielectric spectra was seen here, as with other polymers, mainly through the excellent agreement of the β-relaxation time-temperature dependence with the Vogel-Fulcher-Tammann equation. We have also discovered that new dispersion-cast H+ form Nafion® membranes are susceptible to disintegration/dissolution when subjected to boiling methanol. In this work, we have achieved significant decreases in the percent solubility of H+-form Nafion® by either thermally annealing above 175 °C or solution-processing at 180 °C using a high boiling point solvent. Small Angle X ray Scattering (SAXS) displayed a change in the morphology of H+ form membranes with increasing annealing temperature by a shift in the crystalline scattering peak (q â 0.05 Ã 1) to lower q values. Counterion exchange of Nafion® from H+ to Na+ form had no influence on the membrane's susceptibility to disintegration in boiling methanol. In order to achieve mechanical stability in boiling methanol, Na+ form membranes had to be annealed at 275 °C for at least fifteen minutes. The SAXS data of annealed Na+ form membranes showed a dramatic decrease in crystalline order with annealing temperature, ultimately leading to the disappearance of the crystalline scattering peak after fifteen minutes at 275 °C. The onset of methanol stability with the melting of Nafion® crystallites suggests that chain entanglement is an important parameter in obtaining solvent stability. With respect to chemical stability, we performed studies aimed at examining the effects of Fenton's Reagent on the resistance to radical attack of new generation, dispersion-cast Nafion®. Changes in the 19F solid-state NMR spectra of dispersion-cast Nafion® before and after chemical degradation via Fenton's Reagent predicts a rather random attack by ·OH and ·OOH radicals. Several membranes were also thermally annealed between 100-250 °C in an attempt to correlate crystallinity with chemical degradation kinetics of Nafion® via Fenton's Reagent. The results indicate that the effect of counterion exchange into the Na+ form was minimal, but the degree of thermal degradation had a tremendous effect on the fluoride release rate and chemical degradation kinetics. By exchanging the membranes into the Na+ form, thermal degradation was avoided, allowing us to study the role of crystallinity as a function of fluoride release. Ultimately, Nafion® crystallinity was deemed an important factor in deterring peroxide radical attack. As the percent crystallinity decreased with annealing temperature, the fluoride concentration in the resulting Fenton's media increased accordingly, indicating that the amorphous regions of the polymer are more susceptible to chemical degradation via peroxide radical attack. / Ph. D.

Phosphonium ions readily compare to ammonium ions in regards to their aggregate characteristics, thermal stability, and antibacterial activity. Ionic aggregation in phosphonium-based polymers provides thermoreversible crosslinks, ideal for reversible self-assembly, self-healing, and smart response. In polymers, these ionic functionalities aggregate, providing improved moduli, and altering the size and structure of ionic aggregates regulates polymer melt processability. This dissertation highlights phosphonium-based chemistry for the synthesis of novel step-growth ionomers and structure-property relationships in ionic polymers. The synthesis of phosphonium endcapping reagents for melt polyester reactions afforded a thermally stable ionic functionality that controlled molecular weight. Weak association was present with phosphonium ions at low ion concentrations below 7.7 mole %. The use of novel ionic bisacetoacetate monomers in the formation of networks from Michael addition reactions led to the synthesis of ionic networks with increased and broadened glass transitions and improved tensile stresses at break and strains at break compared to those in the non-ionic networks. The first electrospun fibers from Michael addition crosslinking reactions are reported, and equilibrium ionic liquid uptake experimental results indicated that ionic functional networks absorb close to three times the amount of ionic liquid as non-ionic, poly(ethylene glycol)-based films. Chain-extending polyurethanes with a phosphonium diol and subsequently varying the hard segment content led to changes in ionic aggregation, crystallinity, and thermal transitions in the polymers. Additionally, novel phosphonium-based methacrylate monomers incorporated into diblock copolymers with styrene exhibited microphase separation. Overall, the inclusion of phosphonium ions pendant to or in the main chain of various types of polymers led to changes in morphology, improved tensile properties, enhanced moduli, broadened transitions, changes in crystalline melting points, changes in solubility, and appearance of ionic aggregation. / Ph. D.

The overall goal of this investigation was to elucidate specific structure-property relationships in perfluorosulfonate ionomers (PFSIs)-related materials. The project can be broken into two primary foci. First, we explored the current state of understanding related to morphology-property relationships in PFSIs with specific attention to the nano-scale organization of the ionic and crystalline domains. Specifically, the effect of uniaxial orientation on the structure and transport properties of Nafion® membranes was examined. Small angle X-ray scattering (SAXS) experiments on dry membranes that were uniaxially elongated showed a strong anisotropic morphology which was shown to persist over the swelling process without a significant relaxation. Herman's order parameters for the ionomer peak were strongly influenced by uniaxial deformation, which supports the presence of cylindrical rather than spherical morphology for ionic domains. Comparison of the water diffusion coefficients between unoriented and oriented samples revealed that uniaxial deformation of Nafion® membranes essentially enhances transport ability in one direction (i.e., the parallel to draw direction) and suppresses in the other two directions (i.e., two orthogonal directions relative to the stretching direction). Based on 1-dimensional analyses of oriented SAXS patterns at the azimuthal angle 90o, three recent models (lamellar model, semicrystalline rod-like model and fringed-micelle model) for the morphology of PFSIs were critically evaluated. The loss of meridional scattering, different orientation behavior of the crystalline and ionic domains, and inherent chain stiffness precludes the possibility of a chain-folded lamellar morphology. While the inter-aggregate dimensions remain constant at high draw ratios, the inter-crystalline spacings decrease significantly. Coupled with the distinctly different orientation behavior, these observations preclude the existence of crystallites solely within rod-like aggregates. While the worm-like ionic channel model was able to explain the behavior of SAXS and wide angle X-ray scattering (WAXS) relatively well, this model also had limitations such as (1) crystalline domains directly linked to the ionic domain (and thus a lack of amorphous domains) and (2) a presence of only a single ionic channel between two neighboring crystallites. Second, electroactive materials, specifically ionic polymer-metal composites (IPMCs) that undergo bending motions with the stimulus of a relatively weak electric field were fabricated. To understand the role of the nanoscale morphology of the membrane matrix in affecting the actuation behavior of IPMC systems, we evaluated actuation performance of IPMCs subjected to uniaxial orientation. The PFSI nanostructure altered by uniaxial orientation mimicked the fibrillar structure of biological muscle tissue and yielded a new anisotropic actuation response. It was evident that IPMCs cut from films oriented perpendicular to the draw direction yielded displacement values that were significantly greater than that of unoriented IPMCs. In contrast, IPMCs cut from films oriented parallel to the draw direction appeared to resist bending and yield displacement values that were much less than that of the unoriented IPMC. This anisotropic actuation behavior was attributed to the contribution of the nanoscale morphology to the bulk bending modulus. Overall, this study clearly demonstrated, for the first time, the importance of the nanoscale morphology in affecting/controlling the actuation behavior in IPMC systems. / Ph. D.

The present work describes a selection of strategies for the synthesis of functional aliphatic polycarbonates. Using an end-group functionalization strategy, a series of DNA-binding cationic poly(trimethylene carbonate)s was synthesized for application as vectors for non-viral gene delivery. As the end-group functionality was identical in all polymers, the differences observed in DNA binding and in vitro transfection studies were directly related to the length of the hydrophobic poly(trimethylene carbonate) backbone and the number of functional end-groups. This enabled the use of this polymer system to explore the effects of structural elements on the gene delivery ability of cationic polymers, revealing striking differences between different materials, related to functionality and cationic charge density. In an effort to achieve more flexibility in the synthesis of functional polymers, polycarbonates were synthesized in which the functionalities were distributed along the polymer backbone. Through polymerization of a series of alkyl halide-functional six-membered cyclic carbonates, semicrystalline chloro- and bromo-functional homopolycarbonates were obtained. The tendency of the materials to form crystallites was related to the presence of alkyl as well as halide functionalities and ranged from polymers that crystallized from the melt to materials that only crystallized on precipitation from a solution. Semicrystallinity was also observed for random 1:1 copolymers of some of the monomers with trimethylene carbonate, suggesting a remarkable ability of repeating units originating from these monomers to form crystallites. For the further synthesis of functional monomers and polymers, azide-functional cyclic carbonates were synthesized from the bromo-functional monomers. These were used as starting materials for the click synthesis of triazole-functional cyclic carbonate monomers through Cu(I)-catalyzed azide–alkyne cycloaddition. The click chemistry strategy proved to be a viable route to obtain structurally diverse monomers starting from a few azide-functional precursors. This paves the way for facile synthesis of a wide range of novel functional cyclic carbonate monomers and polycarbonates, limited only by the availability of suitable functional alkynes.