The demands the automotive gear designer has to considerduring the gear design process have changed. To design a gearthat will not fail is still a challenging task, but now lownoise is also a main objective. Both customers and legalregulations demand noise reduction of gears. Moreover, thequality of the product is more in focus than ever before. Inaddition, the gear design process itself must be inexpensiveand quick. One can say that the gear designer faces a newdesign environment. The objective of this thesis is tocontribute to the answer to some of the questions raised inthis new design environment. In order to respond to the new design situation, the geardesigner must consider new phenomena of gears that werepreviously not a matter of concern. One such phenomenon is anew gear failure type, Tooth Interior Fatigue Fracture (TIFF).As the gear teeth are made more slender in an attempt to reducethe stiffness variation during the mesh cycle, therebypotentially reducing the noise, the risk of TIFF is increased.The phenomenon of TIFF is explored in detail (paper III-VI)through fractographic analysis, numerical crack initiationanalysis using FEM, determination of residual stress by meansof neutron diffraction measurements, testing for determiningmaterial fatigue properties, fracture mechanical FE-analysis,sensitivity analysis and the development of an engineeringdesign method. The main findings of the analysis of TIFF arethat TIFF cracks initiate in the tooth interior, TIFF occursmainly in case hardened idlers, the fracture surface has acharacteristic plateau at approximately the mid-height of thetooth and the risk of TIFF is more pronounced in slender gearteeth. Along with the more optimised gear design, there is atendency for the gear to be less robust. Low robustness, i.e.,great variation in performance of the product, implies a highincidence of rejects, malfunction and/or bad-will, all of whichmay have a negative effect on company earnings. As the use ofoptimisation decreases the safety margins, greater attentionhas to be paid to guaranteeing the products' robustness.Moreover, in order to be cost-effective, the qualities of thegear must be verified early in the design process, implying anextended use of simulations. In this thesis, two robustnessanalyses are presented in which the analysing tool issimulation. The first one considers robust tooth root bendingfatigue strength as the gear is exposed to mounting errors, thesecond one considers robust noise characteristics of a gearexposed to manufacturing errors, varying torque and wear. Bothof these case studies address the problem of robustness ofgears and demonstrate how it can be estimated by use ofsimulations. The main result from the former robustnessanalysis is that wide gears are more sensitive to mountingerrors, while the latter analysis showed that to achieve robustnoise characteristics of a gear it should have large helixangles, and some profile- and lead crowning should beintroduced. The transverse contact ratio is a trade-off factorin the sense that both low average noise levels and low scatterin noise due to perturbations cannot be achieved. <b>Keywords</b>: robust design, Taguchi method, gear, idler,simulations, Finite Element Method, Tooth Interior FatigueFracture, TIFF

<p>The demands the automotive gear designer has to considerduring the gear design process have changed. To design a gearthat will not fail is still a challenging task, but now lownoise is also a main objective. Both customers and legalregulations demand noise reduction of gears. Moreover, thequality of the product is more in focus than ever before. Inaddition, the gear design process itself must be inexpensiveand quick. One can say that the gear designer faces a newdesign environment. The objective of this thesis is tocontribute to the answer to some of the questions raised inthis new design environment.</p><p>In order to respond to the new design situation, the geardesigner must consider new phenomena of gears that werepreviously not a matter of concern. One such phenomenon is anew gear failure type, Tooth Interior Fatigue Fracture (TIFF).As the gear teeth are made more slender in an attempt to reducethe stiffness variation during the mesh cycle, therebypotentially reducing the noise, the risk of TIFF is increased.The phenomenon of TIFF is explored in detail (paper III-VI)through fractographic analysis, numerical crack initiationanalysis using FEM, determination of residual stress by meansof neutron diffraction measurements, testing for determiningmaterial fatigue properties, fracture mechanical FE-analysis,sensitivity analysis and the development of an engineeringdesign method. The main findings of the analysis of TIFF arethat TIFF cracks initiate in the tooth interior, TIFF occursmainly in case hardened idlers, the fracture surface has acharacteristic plateau at approximately the mid-height of thetooth and the risk of TIFF is more pronounced in slender gearteeth.</p><p>Along with the more optimised gear design, there is atendency for the gear to be less robust. Low robustness, i.e.,great variation in performance of the product, implies a highincidence of rejects, malfunction and/or bad-will, all of whichmay have a negative effect on company earnings. As the use ofoptimisation decreases the safety margins, greater attentionhas to be paid to guaranteeing the products' robustness.Moreover, in order to be cost-effective, the qualities of thegear must be verified early in the design process, implying anextended use of simulations. In this thesis, two robustnessanalyses are presented in which the analysing tool issimulation. The first one considers robust tooth root bendingfatigue strength as the gear is exposed to mounting errors, thesecond one considers robust noise characteristics of a gearexposed to manufacturing errors, varying torque and wear. Bothof these case studies address the problem of robustness ofgears and demonstrate how it can be estimated by use ofsimulations. The main result from the former robustnessanalysis is that wide gears are more sensitive to mountingerrors, while the latter analysis showed that to achieve robustnoise characteristics of a gear it should have large helixangles, and some profile- and lead crowning should beintroduced. The transverse contact ratio is a trade-off factorin the sense that both low average noise levels and low scatterin noise due to perturbations cannot be achieved.</p><p><b>Keywords</b>: robust design, Taguchi method, gear, idler,simulations, Finite Element Method, Tooth Interior FatigueFracture, TIFF</p>

No description available.

No description available.

The aim of this thesis is to design a conveyor belt readjustable to transport brown coal according to specific parameters. The introduction is focused on describing and dividing conveyor belts and characterizing their individual parts. The main part of the thesis is a description of selected components and design solutions, a functional computation carried out in accordance with the standard ČSN ISO 5048 and further an analysis of transported material's properties. The drafting documentation is attached to the thesis.

The aim of this thesis is to design a conveyor belt readjustable to transport brown coal according to specific parameters. The introduction is focused on describing and dividing conveyor belts and characterizing their individual parts. The main part of the thesis is a description of selected components and design solutions, a functional computation carried out in accordance with the standard ČSN ISO 5048 and further an analysis of transported material's properties. The drafting documentation is attached to the thesis.

One goal of the present study is to emphasize Johnson's "talent for fiction, the range of his comic invention, and the subtlety of his tone." A substantial group of essays from all three serials, those written in the form of letters ostensibly submitted to the essayist by his readers, appears to offer many examples of the inventiveness of Johnson's mind, and it is to this group that the term epistolary essays refers. Johnson was following a well-established tradition in utilizing the device of the imaginary correspondent, but the main objective of this dissertation is to analyze the various personae which Johnson adopted in these essays.