Context: Software architecture is an emerging field and progressively more popular in software engineering. Software architecture has become an essential part in development of software systems. Prototyping is possibly one of the most commonly used learning paradigms in software architecture. Hence, it is reasonable to accept some of the requirements that could be expressed as specific quality attributes for developing and comparative analysis of prototype. In this thesis we deal with software architecture based on different prototypes, where the different platforms have been shared canonical within the software architecture. It also has a good potential for performance intensification to analyze the prototype according to the required quality attributes. Objectives: In this study, we investigate the significance of quality attributes such as performance, maintainability and implementation cost of different software platforms. Mainly, it is focused on integration of prototypes in software architecture. We specifically investigate several challenges being faced by the organizations in the maintainability for addressing the challenges in prototype of network management system using software platforms. Methods: In this study, both theoretical and empirical research methods have been applied. In order to accomplish the goal of this thesis, literature review in this research has performed by studying articles from several sources and also performed snowball sampling method to decrease the chance of missing any relevant article. During literature review, we have analyzed learning structure and workflow of prototypes and then incorporated quality attributes by theoretical analysis. In the experiment part, three prototypes were built by deploying different software platforms such as PHP, JSP and Perl. Each of these prototypes was evaluated with respect to maintainability using twenty five surveys from industrial experts, implementation cost in number of hours and performance in terms of response time. Results: As a result of our study, we have identified different challenges in software architecture and practicing in software prototypes by using different software platforms. By this study we analyze the performance, maintainability and implementation cost for different software platforms. Survey has been conducted to recognize challenges and practices in maintainability of prototypes. We have shown the possibility to achieve better quality attributes given to a certain system. Conclusions: There is trade-off, the best implementation alternative depends on how important the different quality attributes are in a certain situation. / +46 455 38 50 00

Dependencies between requirements are a crucial factor for any software development since they impact many project areas. Nevertheless, their identification remains a challenge. Some methods have been proposed but none of them are really applicable to real projects due to their high cost or low accuracy. DIM is a lightweight method for identifying dependencies proposed on a previous paper. This paper presents an experiment comparing the sets of dependencies found by DIM and a method based on pair-wise comparison. The experiment was executed using a requirement specification for an open source project. These requirements were extracted by reverse engineering. Our results have provided evidence confirming that DIM finds more dependencies and its results (the dependencies identified) do not depend on the profile of the practitioner applying it. Another important result is that DIM requires fewer resources when applied, since it does not rely on pair-wise comparisons and it can be easily automated. / Avda. Espana 101 P6 Bj-E 28341, Madrid, Spain. Telephone number: +34627770492

Esta dissertação de mestrado investiga os formatos de modulação óptica alternativos ao tradicional formato binário de intensidade (NRZ - Non-return-to-zero), ditos avançados, como tecnologia chave para atender às exigências do mercado atual de telecomunicações por transporte de grande volume de dados e alta largura de banda, associados com a redução do custo da informação transmitida por bit. Os formatos avançados de modulação óptica fazem parte das tecnologias que estão sendo investigadas intensamente com o objetivo de superar os desafios impostos pela nova geração de sistemas ópticos com taxas a partir de 40 Gb/s. Este trabalho focaliza o estudo dessa tecnologia, apresentando uma visão geral dos formatos mais discutidos atualmente, suas características e tecnologias de implementação. Foram realizadas simulações utilizando o software comercial Optisystem versão 7.0 da empresa canadense Optiwave Systems Inc., para analisar o desempenho de alguns formatos de modulação de intensidade e de fase com respeito à sensibilidade do receptor, resistência ao cascateamento de filtragem óptica e a efeitos dispersivos e não-lineares. Procurou-se avaliar os formatos em enlaces reais, com características necessárias à sua possível utilização. Também é feita uma breve consideração dos custos associados aos formatos de modulação analisados neste trabalho. Dentre os formatos analisados, os RZ (Return-to zero) apresentaram maior sensibilidade do receptor e melhor tolerância aos efeitos não-lineares que os seus equivalentes NRZ, porém baixa tolerância aos efeitos dispersivos e ao cascateamento de filtragem óptica. O formato duobinário mostrou fraco desempenho de sensibilidade, mas provou ser o mais tolerante à dispersão cromática e à concatenação de filtragem óptica. Os formatos de modulação de fase mostraram ser bem resistentes aos efeitos não-lineares e aos efeitos dispersivos. / This MSc thesis investigates optical modulation formats as an alternative to the use of the traditional intensity binary format NRZ (Non-return-to-zero). Those formats, classified as advanced, represent one of the key technologies aimed to enable the high data volume and broadband, demanded by the present telecommunication market, with cost reduction of transmitted information per bit. Those technologies have been intensevely studied with purpose of overcoming the challenges imposed by the new generation of optical systems, with bit rates from 40 Gb/s. This work focuses on the study of modulation formats most discussed currently, presenting an overview of their main characteristics and implementation techniques. The performance of some intensity and phase formats, in terms of receiver sensitivity, optical filtering cascading, dispersion and nonlinear effects robustness, have been theoretically analyzed from simulations carried out with the commercial software Optisystem v. 7.0, of the Canadian company Optiwave Systems Inc. The analysis has been applied to real optical links, with characteristics that, potentially, demand their use. A cost analysis, based on estimated values associated to devices required for implementing the formats investigated in this work, is also presented. Among the formats studied, those based on RZ (Return-to zero) presented the highest receiver sensitivity and best tolerance to nonlinear effects, in comparison to their equivalent formats, based on NRZ. However, they are less tolerant to dispersive effects and optical filtering cascading. The duobinary format (DB) has shown a weak performance in terms of sensitivity, though has been proved to be the most tolerant to chromatic dispersion and filtering cascading effects. Among all formats, the phase modulation ones presented the highest resistance against nonlinear and dispersive effects.

Esta dissertação de mestrado investiga os formatos de modulação óptica alternativos ao tradicional formato binário de intensidade (NRZ - Non-return-to-zero), ditos avançados, como tecnologia chave para atender às exigências do mercado atual de telecomunicações por transporte de grande volume de dados e alta largura de banda, associados com a redução do custo da informação transmitida por bit. Os formatos avançados de modulação óptica fazem parte das tecnologias que estão sendo investigadas intensamente com o objetivo de superar os desafios impostos pela nova geração de sistemas ópticos com taxas a partir de 40 Gb/s. Este trabalho focaliza o estudo dessa tecnologia, apresentando uma visão geral dos formatos mais discutidos atualmente, suas características e tecnologias de implementação. Foram realizadas simulações utilizando o software comercial Optisystem versão 7.0 da empresa canadense Optiwave Systems Inc., para analisar o desempenho de alguns formatos de modulação de intensidade e de fase com respeito à sensibilidade do receptor, resistência ao cascateamento de filtragem óptica e a efeitos dispersivos e não-lineares. Procurou-se avaliar os formatos em enlaces reais, com características necessárias à sua possível utilização. Também é feita uma breve consideração dos custos associados aos formatos de modulação analisados neste trabalho. Dentre os formatos analisados, os RZ (Return-to zero) apresentaram maior sensibilidade do receptor e melhor tolerância aos efeitos não-lineares que os seus equivalentes NRZ, porém baixa tolerância aos efeitos dispersivos e ao cascateamento de filtragem óptica. O formato duobinário mostrou fraco desempenho de sensibilidade, mas provou ser o mais tolerante à dispersão cromática e à concatenação de filtragem óptica. Os formatos de modulação de fase mostraram ser bem resistentes aos efeitos não-lineares e aos efeitos dispersivos. / This MSc thesis investigates optical modulation formats as an alternative to the use of the traditional intensity binary format NRZ (Non-return-to-zero). Those formats, classified as advanced, represent one of the key technologies aimed to enable the high data volume and broadband, demanded by the present telecommunication market, with cost reduction of transmitted information per bit. Those technologies have been intensevely studied with purpose of overcoming the challenges imposed by the new generation of optical systems, with bit rates from 40 Gb/s. This work focuses on the study of modulation formats most discussed currently, presenting an overview of their main characteristics and implementation techniques. The performance of some intensity and phase formats, in terms of receiver sensitivity, optical filtering cascading, dispersion and nonlinear effects robustness, have been theoretically analyzed from simulations carried out with the commercial software Optisystem v. 7.0, of the Canadian company Optiwave Systems Inc. The analysis has been applied to real optical links, with characteristics that, potentially, demand their use. A cost analysis, based on estimated values associated to devices required for implementing the formats investigated in this work, is also presented. Among the formats studied, those based on RZ (Return-to zero) presented the highest receiver sensitivity and best tolerance to nonlinear effects, in comparison to their equivalent formats, based on NRZ. However, they are less tolerant to dispersive effects and optical filtering cascading. The duobinary format (DB) has shown a weak performance in terms of sensitivity, though has been proved to be the most tolerant to chromatic dispersion and filtering cascading effects. Among all formats, the phase modulation ones presented the highest resistance against nonlinear and dispersive effects.