Global ETD Search

111	A novel coextrusion process for the manufacture of short fiber-reinforced thermoplastic pipe / Doshi, Shailesh R. January 1986 (has links) No description available. Pipe, Plastic. Thermoplastics Reinforced plastics
112	Investigation of instantaneous hydrodynamics and heat transfer to a horizontal tube immersed in a high-temperature gas-solid fluidized bed of large particles Burr, Marlene Mainland 16 March 1998 (has links) Graduation date: 1998 Hydrodynamics Pipe -- Hydrodynamics Heat transmission
113	Turbulent pipe flow drag reduction with narrow distribution polystyrene materials : a test of drag reduction theories Yu, Da-Wei David 15 December 1998 (has links) Graduation date: 1999 Pipe, Plastic -- Fluid dynamics Turbulence
114	Pin hole perforations as a filter for drain tubing / Loong, Seow-phang. January 1983 (has links) Thesis (M.S.)--Ohio State University, 1983. / Includes bibliographical references (leaves 91-93). Available online via OhioLINK's ETD Center
115	Hydrodynamics of HCP with slopes and bends / Gao, Xiang, January 1999 (has links) Thesis (Ph. D.)--University of Missouri-Columbia, 1999. / Typescript. Vita. Includes bibliographical references (leaves 256-260). Also available on the Internet. Pipelines Multiphase flow. Pressure Pipe
116	Hydrodynamics of HCP with slopes and bends Gao, Xiang, January 1999 (has links) Thesis (Ph. D.)--University of Missouri-Columbia, 1999. / Typescript. Vita. Includes bibliographical references (leaves 256-260). Also available on the Internet. Pipelines Multiphase flow. Pressure Pipe
117	Effects of Non Ideal Inlet and Outlet Pipes on Measured Compressor Efficiency Ekberg, Kristoffer January 2015 (has links) The thesis is about investigating the inlet and outlet pipes effect on the compressors measured performance. From measurements made in a gas stand, a thermodynamic model is to be created and the compressor efficiency further investigated. The temperatures and pressures entering and leaving the compressor does not have to be the same as the temperatures measured in the gasstand, because of the thermodynamics of the pipes that connects the measurement equipment and the compressor. During a gasstand test the turbocharger is connected in a test bench, it is connected with pipes on both the compressor and turbine side, to simulate the hot exhaust gases from the car engine and the pressure increase over the compressor. The air entering and leaving the turbocharger through the different pipes is controlled and all the entering and leaving temperatures and pressures are measured. Gasstand data from different tests are available during the thesis, one specific turbocharger is used as references during the modeling. Models of the inlet and outlet pipes are created and connected to a compressor model. The model is controlled to give the same mass flow as the measured data, to ensure that the work cycle is followed. The effects of the non ideal inlet and outlet pipes on measured compressor efficiency is studied with help of this model and the main impacts on the measured compressor efficiency are discovered. The result shows that the measured values used to calculate the compressor efficiency could change, depending on the measurement positions on the inlet and outlet pipes. Turbocharger Compressor Thermodynamic Pipe Efficiency
118	High frequency induction welding & post-welding heat treatment of steel pipes Yan, Pei January 2011 (has links) No description available. 669 Pipe ; Steel ; Pipelines--Welding
119	Analysis of Industrial Construction activities using Knowledge Discovery Techniques Gonzalez, Carlos V. Unknown Date No description available. Industrial Clustering Pipe Modules Indicator
120	Heat transfer to liquid metals flowing turbulently in a pipe Franklet, Duane LeRoy 08 1900 (has links) No description available. Heat Transmission Pipe Fluid dynamics

Search results