Spelling suggestions: "subject:"anfrage thermography"" "subject:"anfrage hermography""
41 |
Inspeção termográfica de danos por impacto em laminados compósitos sólidos de matriz polimérica reforçada com fibras de carbono. / Thermographic inspection of impact damage in solid fiber-reinforced polymer matrix composite laminates.Euripedes Guilherme Raphael de Almeida 30 April 2010 (has links)
Laminados compósitos com matrizes poliméricas, respectivamente termorrígida e termoplástica, reforçadas com fibras contínuas de carbono foram submetidos a impacto único transversal com diferentes níveis de energia. Os danos imprimidos aos materiais estruturais foram avaliados por termografia ativa infravermelha na modalidade transmissão. Em geral, os termogramas do laminado termoplástico apresentaram indicações mais claras e bem definidas dos danos causados por impacto, se comparados aos do compósito termorrígido. O aquecimento convectivo das amostras por fluxo controlado de ar se mostrou mais eficaz que o realizado por irradiação, empregando-se lâmpadas incadecentes. Observou-se também que tempos mais longos de aquecimento favoreceram a visualização dos danos. O posicionamento da face impactada do espécime, relativamente à câmera infravermelha e à fonte de calor, não afetou a qualidade dos termogramas no caso do laminado termorrígido, enquanto que influenciou significativamente os termogramas do compósito termoplástico. Os resultados permitiram concluir que a termografia infravermelha é um método de ensaio não-destrutivo simples, robusto e confiável para a detecção de danos por impacto inferior à 5 Joules em laminados compósitos poliméricos reforçados com fibras de carbono. / Continuous carbon fiber-reinforced thermosetting and thermoplastic composite laminates were exposed to single transversal impact with different energy levels. The damages marked to the structural materials were evaluated by active infrared thermography in transmission mode. In general, the thermoplastic laminate thermograms showed more clear and delineated damage indications when compared to the ones from thermosetting composite. The convective heating of the samples by controlled hot air flow was more efficient than via irradiation using lamp. It was also observed that longer heating times improved the damage visualization. The positioning of the specimen´s impacted face regarding the infrared camera and the heating source did not affect the thermo-imaging of thermosetting specimens, whereas it substantially influenced the thermograms of thermoplastic laminates. The results allow concluding that infrared thermography is a simple, robust and trustworthy methodology for detecting impact damages as light as 5 Joules in carbon fiber composite laminates.
|
42 |
Reconstruction 3D de sources de chaleur volumiques à partir des champs de température de surface mesurés par thermographie InfraRouge / 3D reconstruction of volumetric heat sources from surface temperature fields measured by infrared thermographyGroz, Marie-Marthe 17 September 2019 (has links)
L'évaluation et le contrôle non destructifs (E.C.N.D.) des matériaux et des structures sont une problématique industrielle très importante dans les domaines du transport, de l'aéronautique et du spatial, et dans le milieu médical. La thermographie infrarouge active est une technique d'E.C.N.D qui consiste à apporter une excitation extérieure afin d'entraîner une élévation de température dans le matériau, puis à évaluer le champ de température résultant à la surface. Cependant, les excitateurs thermiques utilisés (lampes flash, halogènes, lasers) agissent uniquement sur la surface du matériau. Plusieurs systèmes de conversion d'énergie peuvent en revanche mener à l'apparition de sources volumiques : on peut citer en particulier les phénomènes de thermo-acoustique, de thermo-induction, de thermomécanique ou de thermochimie. Par exemple, une excitation par ondes ultrasonores peut entraîner des sources thermiques volumiques si le matériau est viscoélastique ou s'il y a présence de défaut. La reconstruction de ces sources est donc la première étape permettant de remonter aux paramètres responsables de l'échauffement. Caractériser une source thermique consiste à reconstruire sa géométrie et la puissance qu'elle génère. Cependant, l'identification de sources thermiques volumiques par la mesure des champs de température de surface est un problème mathématiquement mal posé. Le caractère diffusif de la température en est le principal responsable. Dans ce travail, la reconstruction 3D des sources volumiques à partir du champ de température résultant à la surface, mesuré par InfraRouge, est étudié. Tout d'abord, une analyse du problème physique permet de spécifier les limites de la reconstruction. En particulier, un critère sur la résolution spatiale atteignable est défini et une limitation de reconstruction pour les sources en profondeur est mise en lumière. Ensuite, une méthode de reconstruction par approche probabiliste est proposée et comparée aux méthodes d'inversions existantes. Le temps d'exécution et la sensibilité au bruit de mesure sont étudiés pour chacune de ces méthodes. Des applications numériques et expérimentales seront enfin présentées pour illustrer les résultats. / Non Destructive Testing (N.D.T.) of materials and structures is a very important industrial issue in the fields of transport, aeronautics and space and in the medical domain. Active infrared thermography is a N.D.T. method that consists in providing an external excitation to cause an elevation of temperature field in the material and then to evaluate the resulting temperature field at the surface. However, thermal exciters used (flash lamps, halogen, lasers) act only on the surface of the sample. Several energy conversion systems can on the other hand lead to the generation of volumetric sources: the phenomena of thermo-acoustic, thermo-induction, thermomechanic or thermochemistry can be cited. For example, ultrasonic waves can generate volumetric heat sources if the material is viscoelastic or if there is a defect. The reconstruction of these sources is the first step for the quantification of parameters responsible of the heating. Characterizing a heat source means reconstructing its geometry and the power it generates. For example, a defect in a structure and / or the viscoelasticity of a material can be detected and quantified by this technique if it acts directly on temperature field. However, identification of volumetric heat sources from surface temperature fields is a mathematical ill-posed problem. The diffusive nature of the temperature is the main cause. In this work, the 3D reconstruction of the volumetric heat sources from the resulting surface temperature field, measured by InfraRed, is studied. First, an analysis of the physical problem enables to specify the limits of the reconstruction. In particular, a criterion on achievable spatial resolution is defined and a reconstruction limitation for in-depth sources is highlighted. Then, a probabilistic approach for the reconstruction is proposed and compared to existing inverse methods. The computation time and noise sensitivity are studied for each of these methods. Numerical and experimental applications will thus be presented to illustrate the results.
|
43 |
Defect Detection on Rail Base Area Using Infrared ThermographyShrestha, Survesh Bahadur 01 September 2020 (has links)
This research aims to investigate the application of infrared thermography (IRT) as a method of nondestructive evaluation (NDE) for the detection of defects in the rail base area. Rails have to withstand harsh conditions during their application. Therefore, defects can develop in the base area of rails due to stresses such as bending, shear, contact, and thermal stresses, fatigue, and corrosion. Such defects can cause catastrophic failures in the rails, ultimately leading to train derailments. Rail base defects due to fatigue and corrosion are difficult to detect and currently there are no reliable or practical non-destructive evaluation (NDE) methods for finding these types of defects in the revenue service. Transportation Technology Center, Inc. (TTCI) had previously conducted a research on the capability of flash IRT to detect defects in rail base area based on simulation approach. The research covered in this thesis is the continuation of the same project.In this research, three rail samples were prepared with each containing a notched-edge, side-drilled holes (SDHs), and bottom-drilled holes (BDHs). Two steel sample blocks containing BDHs and SDHs of different sizes and depths were also prepared. Preliminary IRT trials were conducted on the steel samples to obtain an optimal IRT setup configuration. The initial inspections for one of the steel samples were outsourced to Thermal Wave Imaging (TWI) where they employed Thermographic Signal Reconstruction (TSR) technique to enhance the resulting images. Additional inspections of the steel samples were performed in the Southern Illinois University-Carbondale (SIUC) facility. In case of the rail samples, the SDHs and the notched-edge reflectors could not be detected in any of the experimental trials performed in this research. In addition, two more rail samples containing BDHs were prepared to investigate the detection capabilities for three different surface conditions: painted, unpainted, and rusted. The painted surface provided a best-case scenario for inspections while the other conditions offered further insight on correlating the application to industry-like cases.A 1300 W halogen lamp was employed as the heat source for providing continuous thermal excitation for various durations. Post-processing and analysis of the resulting thermal images was performed within the acquisition software using built-in analysis tools such as temperature probes, Region of Interest (ROI) based intensity profiles, and smoothing filters. The minimum defect diameter to depth (aspect) ratio detected in preliminary trials for the steel sample blocks were 1.0 at a diameter of 4.7625 mm (0.1875 in) and 1.5 at a diameter of 3.175 mm (0.125 in). For the inspection of painted rail sample, the longest exposure times (10 sec) provided the best detection capabilities in all sets of trials. The three holes having aspect ratio greater or equal to 1.0 were indicated in the thermal response of the painted and rusted samples while only the two holes having aspect ratio greater or equal to 1.5 were indicated in the unaltered sample. Indications of reflectors were identified through qualitative graphical analysis of pixel intensity distributions obtained along a bending line profile. The results obtained from the painted sample provided a baseline for analyzing the results from the unpainted and rusted rail samples. This provided an insight on the limitations and requirements for future development. The primary takeaway is the need for an optimized heat source. Poor contrast in the resulting image for the unpainted and rusted rail samples is experienced due to both noise and lack of penetration of the heat energy. This could have been due to decreased emissivity values. Moreover, the excitation method employed in this research does not comply with current industry standards for track clearances. Therefore, exploration of alternative excitation methods is recommended.
|
44 |
Full-Field Strain and Temperature Measurement of Epoxy Resin PR-520 Subjected to Tensile, Compressive, and Torsional Loading at Various Strain RatesKonieczny, Mark J. January 2019 (has links)
No description available.
|
45 |
ANALYSIS OF FULL-SCALE IN-SERVICE CIVILENGINEERING STRUCTURESSirca, Gene F., Jr. 17 October 2019 (has links)
No description available.
|
46 |
Effects of Film Cooling on Turbine Blade Tip Flow Structures and Thermal LoadingChristensen, Louis Edward 24 August 2022 (has links)
No description available.
|
47 |
Long-Term Performance of Polymeric Materials in Civil InfrastructureShaikh, Mohammad Shadab Sadique 14 July 2023 (has links)
Polymeric materials are popular in civil infrastructure due to their durability, strength, and resistance to corrosion and environmental degradation. However, the long-term performance of such materials in civil infrastructure is still being researched and investigated. This thesis will focus on the long-term performance of two civil infrastructure applications: 1) high-density polyethylene (HDPE) above-ground storage tanks (AST) and 2) silicone and self-healing polymeric concrete sealants.
HDPE is a strong and durable plastic material that is commonly used to store a wide range of liquids ASTs. Currently, there are no established protocols for carrying out non-destructive testing (NDT) and assessment of HDPE ASTs for regular inspections, so this study investigated the viability of using infrared thermography (IRT) and ultrasonic testing (UT) for routine inspection. The study discovered that environmental parameters, such as temperature, wind, and humidity, can affect IRT accuracy, and that a proper heating-cooling cycle can aid in defect detection. Concrete joints in pavement systems are often susceptible to deterioration. They are engineered cracks that enable concrete slabs to expand and contract in response to temperature. They serve the dual purpose of preventing water infiltration and improving ride quality, while extending the pavement's service life. Bridge joints, in particular, are susceptible to water and liquid penetration, which can result in extensive damage over time. By applying sealants to these connections, concrete structures can be protected from such damage, thereby extending their service life. Consequently, a better comprehension of sealant performance and additional research are required to develop effective solutions to address these issues and ensure the safety and longevity of concrete structures prone to cracking. In this study, samples of the two commercial silicone joint sealants were sandwiched between Portland cement mortar specimens and tested using a specially designed fixture to imitate the fatigue performance of the joint under simulated field conditions. The results of the study indicated that the fatigue life of the two silicone sealants were different, with Sealant 2 showed better performance than Sealant 1. Both sealants exhibited adhesive failure initiating debonding along the weak interface of cement mortar cube and joint sealant. The results of commercial sealants are then compared with self-healing polysulfide sealants. This indicates that the performance of sealants can vary, and additional research may be required to develop effective solutions to address these issues. / Master of Science / Polymeric materials are widely utilized in construction due to their durability, strength, and resistance to corrosion and environmental degradation. However, the long-term performance of these materials in civil infrastructure is still under investigation. This thesis specifically examines the long-term performance of two civil infrastructure applications: 1) high-density polyethylene (HDPE) above-ground storage tanks (ASTs) and 2) silicone and self-healing polymeric concrete sealants.
HDPE is a robust and durable plastic material commonly employed for storing various liquids in ASTs. Currently, there are no established protocols for conducting non-destructive testing (NDT) and assessment of HDPE ASTs during regular inspections. Therefore, this study investigates the viability of utilizing infrared thermography (IRT) and ultrasonic testing (UT) for routine inspections. The findings reveal that environmental factors such as temperature, wind, and humidity can impact the accuracy of IRT, and implementing a proper heating-cooling cycle can help in detecting such defects inside the tank structure.
Concrete joints in pavement systems are susceptible to deterioration. These engineered cracks allow concrete slabs to expand and contract in response to temperature changes, while preventing water infiltration and enhancing ride quality, thus prolonging the pavement's service life. Bridge joints, in particular, are prone to water and liquid penetration, leading to extensive damage over time. Applying sealants to these connections safeguards concrete structures, extending their service life. Consequently, understanding sealant performance and conducting further research are crucial for developing effective solutions to address these issues and ensure the safety and durability of concrete structures prone to cracking.
This study involves testing two commercially available silicone joint sealants by sandwiching them between Portland cement mortar specimens. A specially designed fixture is employed to simulate the fatigue performance of joints under field-like conditions. The performance of commercial sealants was also compared with self-healing polysulfide sealants. These findings highlight the variability in sealant performance, emphasizing the need for additional research to develop effective solutions.
|
48 |
Experimental and Numerical Study of Impingement Jet Heat TransferSchroder, Andrew Urban 11 October 2011 (has links)
No description available.
|
49 |
Transition Detection for Low Speed Wind Tunnel Testing Using Infrared ThermographyJoseph, Liselle AnnMarie 26 March 2014 (has links)
Transition is an important phenomenon in large scale, commercial, wind tunnel testing at low speeds because it is an excellent indicator of an airfoil performance. It is difficult to estimate transition through numerical techniques because of the complex nature of viscous flow. Therefore experimental techniques can be essential. Over the transition region the rate of heat transfer shows significant increases which can be detected using infrared thermography. This technique has been used predominantly at high speeds, on small models made of insulated materials, and for short test runs. Large scale testing has not been widely undertaken because the high sensitivity of transition to external factors makes it difficult to detect.
The present study records the process undertaken to develop, implement and validate a transition detection system for continual use in the Virginia Tech Stability Wind Tunnel: a low speed, commercial wind tunnel where large, aluminium models are tested. The final system developed comprises of two high resolution FLIR A655sc infrared cameras; four 63.5-mm diameter circular windows; aluminium models covered in 0.8-mm silicone rubber insulation and a top layer of ConTact© paper; and a series of 25.4-mm wide rubber silicone fiberglass insulated heaters mounted inside the model and controlled externally by experimenters. This system produces images or videos of the model and the associated transition location, which is later extracted through image processing methods to give a final transition location in percentage chord.
The system was validated using two DU96-W-180 airfoils of different chord lengths in the Virginia Tech Stability Wind Tunnel, each tested two months apart. The system proved to be robust and efficient, while not affecting the airfoil performance or any other system in use in the wind tunnel. Transition results produced by the system were compared to measurements obtained from pressure data and stethoscope tests as well as the numerical predictions of XFOIL. The transition results from all four methods showed excellent agreement with each other for the two models, for at least two Reynolds numbers and for several angles of attack on both suction and pressure side of the model. The agreement of data obtained under such different conditions and at different times suggests that the infrared thermography system efficiently and accurately detects transition for large aluminium models at low speeds. / Master of Science
|
50 |
Assessment of Infrared Thermography for NDE of FRP Bridge DecksMiceli, Marybeth 10 January 2001 (has links)
Statistics released in the fall 1989 showed that 238,357 (41%) of the nation's 577,710 bridges are either structurally deficient or functionally obsolete. New materials, such as fiber reinforced polymeric composites (FRP), are being suggested for use in bridge systems to solve some of the current problems. These materials are thought to be less affected by corrosive environmental conditions than conventional civil engineering materials. Therefore they may require less maintenance and provide longer life spans. More specifically, glass fiber reinforced vinyl ester matrix composites are considered possible replacements for deteriorating conventional bridge decks due to their durability, decreased weight, and relative affordability.
In order to facilitate rapid acceptance of FRP structural components into the world of civil structural engineering, effective and efficient NDE techniques must be explored and documented in these situations.
This thesis will discuss the use of Infrared Thermography (IRT) as a means of detecting debonds and voids caused by conditions encountered both in fabrication and in the field. As forced convective hot air is applied within the bridge deck, debonds between bridge deck components near the riding surface appear cold while imperfections near the bottom of the deck give rise to concentrations of heat. These variations in thermal propagation patterns are observed by the infrared camera and indicate possible structural deficiencies.
Results of experimentation and thermal analyses from laboratory studies of a model bridge deck and some from in situ full-scale investigations are presented. / Master of Science
|
Page generated in 0.0542 seconds