Spelling suggestions: "subject:"injection moulding"" "subject:"injection goulding""
41 |
Environmentally friendly packaging materials from renewable resources as alternatives for oil-based polymersSilva, Kodikara Manjula Dilkushi January 2011 (has links)
Nearly 60 m tonnes of waste is produced annually in Europe from “plastic packaging” engendering significant challenges for legislative controls and minimisation of environmental impact. There is an increasing demand for biodegradable packaging, which can be disposed of with minimum environmental impact, but the growing market is still in its infancy predominantly due to a lack of materials having environmental, practical and economic suitability. This research project dealt with some processing challenges of environmentally friendly packaging materials from renewable resources, as a long term solution to mitigate some issues associated with oil based plastic packaging. In this work, novel Polylactic acid (PLA) and starch based composites were developed with the requisite technical properties to fill the gap in the food packaging and cosmetic packaging industry. It was found that starch can be incorporated in a PLA matrix at the 10% level without difficulty in processing in the presence of 2% methyldiphenyl diisocyante. The blend shows properties similar to pure PLA. It was also found that the elongation at break and impact properties of PLA can be increased remarkably by the addition of a biostrength impact modifier. Furthermore, mixing of PLA and starch in the blend is efficient when the PLA particle size is reduced. It was also found that flexible and tougher PLA/starch blend pellets, that can be injection moulded, can be produced by an extrusion process with a range of additives. Each additive has a maximum level that exhibits optimum properties. The blends also established that 15% starch can be incorporated into the PLA matrix to reduce the cost without any processing difficulties. Encouragingly, the presence of an impact modifier in the PLA/starch blends has shown more desirable properties. Furthermore, the mechanical properties of the pellets exposed to increased residence time in the injection moulding barrel and of the test specimens stored for 9 months at 21ºC were also satisfactory for the new blend. The overall results exhibited some attractive properties in the tri blend system, which can be easily adopted by the plastics industry for development of an injection moulded product within the scope of applications such as dry food packaging or cosmetic packaging. A further finding of this project is that biodegradation under a home composting environment can be improved by incorporating starch and certain other modifiers into PLA.
|
42 |
A holistic approach to injection moulding optimisation for product quality and cost through the characterisation of reprocessed polymeric materials and process monitoring : experimental evaluations and statistical analysis of multiple reprocessing of unfilled and short glass fibre filled polypropylene materials : an optimised methodology to realise minimum product cost at an acceptable product qualityElsheikhi, Salah A. January 2011 (has links)
The plastics industry is one of the fastest growing major industries in the world. There is an increase in the amount of plastic used for all types of products due to its light weight and ability to reprocess. For this reason, the reprocessing of thermoplastics and the usability of reprocessed materials are gaining significance, and it is important to produce and consume plastic materials in an environmentally friendly way. In addition, rising raw material cost linked to the increased oil prices encouraged for reusing of the plastic materials. The aim of this research was to study and optimize the injection moulding process parameters to achieve a trade-off between the product cost and product quality, measured through mechanical properties and geometry, based on using regrind ratios. The work was underpinned by a comprehensive study of multiple reprocessing effects in order to evaluate the effect of process parameters, material behaviour, reprocessing effects and possible links between the processing parameters and key properties. Experimental investigations were carried out, in particular, focused on the melt preparation phase to identify key process parameters and settings. Multiple reprocessing stages were carried out; using two types of PP material: unfilled and short glass filled. A series of tests were used to examine product quality (mass, colour and shrinkage) and physical properties (density, crystallinity, thermal stability, fibre length, molecular weight, in-line and off-line viscosity, tensile strength, modulus of elasticity, elongation (%) and flexural strength). This investigation showed that the mouldability of the filled and unfilled PP materials, through the successive reprocessing stages (using 100 % regrind), was observed to be relatively consistent. Given the link between the processing parameters and key product and material properties, it is possible to manufacture products with minimal loss to part quality and mechanical properties. The final phase of the work focused on process optimisation study for short glass fibre filled PP material and the identified key process parameters (melt temperature, screw rotational speed, holding pressure, holding time and injection rate). A response surface experiment was planned and carried out for three reprocessing stages (0 %, 25 % and 50 % regrind). The fitted response surface models were utilised to carry out the trade-off analysis between the operating cost (material cost, energy cost and labour cost) and product quality (dimensions and tensile strength) Based on the optimal moulding conditions, the operating cost was reduced (from stage I as a reference), by 24% and 30 % for stage II and stage III respectively. A small, perhaps undetectable, change in product dimensions was noted. In addition, a small reduction in tensile strength was noted (from stage I as a reference), by 0.4% and 0.1 % for stage II and stage III respectively. The same data was applied in other countries (Australia, USA, Brazil, Libya and China) to manufacture the same product; and it was observed that the cost was reduced with increasing of regrind ratio. But the significant reduction of the cost, essentially, depended on those countries which have low wage rates (e.g. Brazil, Libya and China). For example, the cost of moulded product manufactured in China is £ 0.025 (using 50% of regrind), while the cost of the same product produced in Australia is £ 0.12, hence giving a total saving of 79 % and making it a valuable issue to be considered in industry.
|
43 |
Crystallization of polyethylene terephthalate in injection moulding : experiments, modelling and numerical simulationVerhoyen, Olivier 01 February 1997 (has links)
Crystallization of polyethylene terephthalate in injection moulding : experiments, modelling and numerical simulation.
|
44 |
Crystallization of polyethylene terephthalate in injection moulding : experiments, modelling and numerical simulationVerhoyen, Olivier 01 February 1997 (has links)
Crystallization of polyethylene terephthalate in injection moulding : experiments, modelling and numerical simulation.
|
45 |
Micro-injection moulding of three-dimensional integrated microfluidic devicesAttia, Usama M. January 2009 (has links)
This thesis investigates the use of micro-injection moulding (μIM), as a high-volume process, for producing three-dimensional, integrated microfluidic devices. It started with literature reviews that covered three topics: μIM of thermoplastic microfluidics, designing for three-dimensional (3-D) microfluidics and functional integration in μIM. Research gaps were identified: Designing 3-D microfluidics within the limitations of μIM, process optimisation and the integration of functional elements. A process chain was presented to fabricate a three-dimensional microfluidic device for medical application by μIM. The thesis also investigated the effect of processing conditions on the quality of the replicated component. The design-of-experiments (DOE) approach is used to highlight the significant processing conditions that affect the part mass taking into consideration the change in part geometry. The approach was also used to evaluate the variability within the process and its effect on the replicability of the process. Part flatness was also evaluated with respect to post-filling process parameters. The thesis investigated the possibility of integrating functional elements within μIM to produce microfluidic devices with hybrid structures. The literature reviews highlighted the importance of quality control in high-volume micromoulding and in-line functional integration in microfluidics. A taxonomy of process integration was also developed based on transformation functions. The experimental results showed that μIM can be used to fabricate microfluidic devices that have true three-dimensional structures by subsequent lamination. The DOE results showed a significant effect of individual process variables on the filling quality of the produced components and their flatness. The geometry of the replicated component was shown to have effect on influential parameters. Other variables, on the other hand, were shown to have a possible effect on process variability. Optimization statistical tools were used to improve multiple quality criteria. Thermoplastic elastomers (TPE) were processed with μIM to produce hybrid structures with functional elements.
|
46 |
Mechanical properties and compostability of injection-moulded biodegradable compositionsBurns, Mara Georgieva 19 January 2009 (has links)
Please read the abstract in the dissertation. / Dissertation (MSc)--University of Pretoria, 2009. / Chemical Engineering / unrestricted
|
47 |
Aplikace CAD/CAM softwaru WorkNC při obrábění / Application of WorkNC CAD/CAM software for machiningKuchař, Petr January 2019 (has links)
The aim of this thesis was to design core and cavity part of the injection moulding tool with regard to the possibilities of SKD Bojkovice company. The structure of the thesis was divided into two main parts - the theoretical part, where the necessary theory for the elaboration of the second part, the practical one was briefly introduced. In the practical part own plastic component was designed, constructed an injection mold with emphasis on the core and cavity parts of the injection moulding tool and produced the necessary production documentation. Subsequently, the process of manufacturing these parts of the mold was described, and a brief technical-economic evaluation of the manufacturing process took place at the very end.
|
48 |
Topologická optimalizace pohyblivé, pevné a základní desky elektromechanického vstřikolisu / Topology optimization of movable, fixed and based plate of electromechanical injection-moulding machineKecík, Samuel January 2019 (has links)
The master thesis deals with the design of geometry of plates of the injection molding unit using the FEM tool Topological Optimization. The reason for this is to reduce the weight of these components, which is beneficial in the transport and assembly of the injection molding machine. However, the final models of geometry of plates must meet certain requirements in terms of the limit state of deformation, the limit state to the critical value of the equivalent stress. This condition involves both limit state of elasticity and limit state of fatigue. Computational modeling and also Topological Optimization are performed in ANSYS Workbench.
|
49 |
Technologie výroby plastové součásti pro automobilový průmysl / Production technology of plastic parts for automotive industryŠobáň, Jakub January 2020 (has links)
The diploma thesis presents a production technology design of an automotive industry component – a resonator holder. The initial production run of the part is 500 000 pcs. Injection production has been selected based on variant analysis of available technologies. Technological calculations have been performed. The selected material PP 56M10 will be used for operation in granules. A quadruple shaped cavity injection mold with a tunnel gate has been designed. Based on estimated technological properties an Arburg Allrounder 470 A machine has been selected. The break-even point (BEP) shows economic return at the production of 185 595 pcs.
|
50 |
Návrh technologie výroby zátky z plastu / Design of manufacturing technology for plastic plugKočí, Ivan January 2009 (has links)
This graduation theses analyse a concept of plastic plug production using the technology of injecting plastic into the form. There is performed a design of the technologic process with necessary calculations included here. Besides that the analysis is also focused on construction of the injection form. For the solution the 3D CAD system by SolidWorks and Hasco, Meusburger, Synventive normals were used. The graduation theses is finally valorized by technological-economic summary.
|
Page generated in 0.1143 seconds