This thesis presents a novel approach to several problems in intelligent transportation systems using collaborative driving coordination. With inter-vehicle communication and intelligent vehicle cooperation, important tasks in transportation such as lane position determination, lane assignment and platoon formation can be solved. Several topics in regard to inter-vehicle communication, lane positioning, lane assignment and platoon formation are explored in this thesis: First, the design and experimental results of low-cost lane-level positioning system that can support a large number of transportation applications are discussed. Using a Markov-based approach based on sharing information among a group of vehicles that are traveling within the communication range of each other, the lane positions of vehicles can be determined. The robustness effectiveness of the system is shown in both simulations and real road tests. Second, a decentralized approach to lane scheduling for vehicles with an aim to increase traffic throughput while ensuring the vehicles exit successfully at their destinations is presented. Most of current traffic management systems do not consider lane organization of vehicles and only regulate traffic flows by controlling traffic signals or ramp meters. However, traffic throughput and efficient use of highways can be increased by coordinating driver behaviors intelligently. The lane optimization problem is formulated as a linear programming problem that can be solved using the Simplex method. Finally, a direction for cooperative vehicle platoon formation is proposed. To enhance traffic safety, increase lane capacities and reduce fuel consumption, vehicles can be organized into platoons with the objective of maximizing the travel distance that platoons stay intact. Toward this end, this work evaluates a proposed strategy which assigns vehicles to platoons by solving an optimization problem. A linear model for assigning vehicles to appropriate platoons when they enter the highway is formulated. Simulation results demonstrate that lane capacity can be increased effectively when platooning operation is used.

This thesis presents a novel approach to several problems in intelligent transportation systems using collaborative driving coordination. With inter-vehicle communication and intelligent vehicle cooperation, important tasks in transportation such as lane position determination, lane assignment and platoon formation can be solved. Several topics in regard to inter-vehicle communication, lane positioning, lane assignment and platoon formation are explored in this thesis: First, the design and experimental results of low-cost lane-level positioning system that can support a large number of transportation applications are discussed. Using a Markov-based approach based on sharing information among a group of vehicles that are traveling within the communication range of each other, the lane positions of vehicles can be determined. The robustness effectiveness of the system is shown in both simulations and real road tests. Second, a decentralized approach to lane scheduling for vehicles with an aim to increase traffic throughput while ensuring the vehicles exit successfully at their destinations is presented. Most of current traffic management systems do not consider lane organization of vehicles and only regulate traffic flows by controlling traffic signals or ramp meters. However, traffic throughput and efficient use of highways can be increased by coordinating driver behaviors intelligently. The lane optimization problem is formulated as a linear programming problem that can be solved using the Simplex method. Finally, a direction for cooperative vehicle platoon formation is proposed. To enhance traffic safety, increase lane capacities and reduce fuel consumption, vehicles can be organized into platoons with the objective of maximizing the travel distance that platoons stay intact. Toward this end, this work evaluates a proposed strategy which assigns vehicles to platoons by solving an optimization problem. A linear model for assigning vehicles to appropriate platoons when they enter the highway is formulated. Simulation results demonstrate that lane capacity can be increased effectively when platooning operation is used.

Advances in computing and wireless communication technologies have increased interest in smart vehicles, vehicles equipped with significant computing, communication and sensing capabilities to provide services to travelers. Smart vehicles can be exploited to improve driving safety and comfort as well as optimize surface transportation systems. Wireless communications among vehicles and between vehicles and roadside infrastructures represent an important class of vehicle communications. One can envision creating an integrated radio network leveraging various wireless technologies that work together in a seamless fashion. Based on cost-performance tradeoffs, different network configurations may be appropriate for different environments. An understanding of the properties of different vehicular network architectures is absolutely necessary before services can be successfully deployed. Based on this understanding, efficient data services (e.g., data dissemination services) can be designed to accommodate application requirements. This thesis examines several research topics concerning both the evaluation and design of vehicular networks. We explore the properties of vehicle-to-vehicle (v2v) communications. We study the spatial propagation of information along the road using v2v communications. Our analysis identifies the vehicle traffic characteristics that significantly affect information propagation. We also evaluate the feasibility of propagating information along a highway. Several design alternatives exist to build infrastructure-based vehicular networks. Their characteristics have been evaluated in a realistic vehicular environment. Based on these evaluations, we have developed some insights into the design of future broadband vehicular networks capable of adapting to varying vehicle traffic conditions. Based on the above analysis, opportunistic forwarding that exploit vehicle mobility to overcome vehicular network partitioning appears to be a viable approach for data dissemination using v2v communications for applications that can tolerate some data loss and delay. We introduce a methodology to design enhanced opportunistic forwarding algorithms. Practical algorithms derived from this methodology have exhibited different performance/overhead tradeoffs. An in-depth understanding of wireless communication performance in a vehicular environment is necessary to provide the groundwork for realizing reliable mobile communication services. We have conducted an extensive set of field experiments to uncover the performance of short-range communications between vehicles and between vehicles and roadside stations in a specific highway scenario.

Intelligent vehicles require perception systems with high performances. Usually, perception system consists of multiple sensors, such as cameras, 2D/3D lidars or radars. The works presented in this Ph.D thesis concern several topics on cameras and lidar based perception for understanding dynamic scenes in urban environments. The works are composed of four parts.In the first part, a stereo vision based visual odometry is proposed by comparing several different approaches of image feature detection and feature points association. After a comprehensive comparison, a suitable feature detector and a feature points association approach is selected to achieve better performance of stereo visual odometry. In the second part, independent moving objects are detected and segmented by the results of visual odometry and U-disparity image. Then, spatial features are extracted by a kernel-PCA method and classifiers are trained based on these spatial features to recognize different types of common moving objects e.g. pedestrians, vehicles and cyclists. In the third part, an extrinsic calibration method between a 2D lidar and a stereoscopic system is proposed. This method solves the problem of extrinsic calibration by placing a common calibration chessboard in front of the stereoscopic system and 2D lidar, and by considering the geometric relationship between the cameras of the stereoscopic system. This calibration method integrates also sensor noise models and Mahalanobis distance optimization for more robustness. At last, dynamic occupancy grid mapping is proposed by 3D reconstruction of the environment, obtained from stereovision and Lidar data separately and then conjointly. An improved occupancy grid map is obtained by estimating the pitch angle between ground plane and the stereoscopic system. The moving object detection and recognition results (from the first and second parts) are incorporated into the occupancy grid map to augment the semantic meanings. All the proposed and developed methods are tested and evaluated with simulation and real data acquired by the experimental platform "intelligent vehicle SetCar" of IRTES-SET laboratory.

A vehicles ability to detect and estimate its surroundings is important for ensuring the safety of the vehicle and passengers regardless of the level of vehicle autonomy. With an improved road and lane estimation, advanced driver-assistance systems will be able to provide earlier and more accurate warnings and actions to prevent a possible accident. Current lane boundary estimations rely on camera and inertial sensor data to detect and estimate relevant lane boundaries in the vehicles surroundings. The current lane boundary estimation system struggles to provide correct estimations at distances exceeding 75 meters and has a performance which is affected by environmental effects. The methods in this thesis show how map data, together with sensor fusion with radar, camera, inertial measurement unit and global navigation satellite system data is able to provide an improvement to the lane boundary estimations. The map based estimation system is implemented and evaluated for high speed roads (highways and country roads) where lane boundary estimations for distances above 75 meters are needed. The results are conducted in a simulate environment and show how the map based system is able to correct unreliable sensor input to provide more precise boundary estimations. The map based system is also able to provide an up to 36% relative increase in correctly identified objects within ego vehicles lane between 12.5-150 meters in front of ego vehicle. The results indicate the ability to extend the horizon in which driver-assistance functions are able to operate, thus increasing the safety of future autonomous or semi-autonomous vehicles. Future work within the subject is needed to apply map based estimations on urban areas. The precision of such an system also relies on precise positional data. Incorporation of more precise global navigation data would be able to show an increased performance. / Ett fordons förmåga att upptäcka och uppskatta sin omgivning är viktig för att säkerställa fordonets och passagerarnas säkerhet oavsett fordonets autonominivå. Med en förbättrad väg- och körfältsuppskattning kommer avancerade förarassistanssystem att kunna ge tidigare och mer exakta varningar och åtgärder för att förhindra en eventuell olycka. Aktuella estimeringar av körfältsgränser är beroende av kamera och tröghetssensordata för att upptäcka och uppskatta relevanta körfältsgränser i fordonets omgivning. Det nuvarande estimerings-systemet upvisar inkorrekta uppskattningar på avstånd över 75 meter och har en prestanda som påverkas av den omgivande miljön. Metoderna i detta examensarbete visar hur kartdata, tillsammans med sensorfusion av radar, kamera, tröghetsmätenhet och globala satellitnavigeringsdata, kan ge en förbättrad estimering av körfältsgränser. Det kartbaserade systemet är implementerat och utvärderat för höghastighetsvägar (motorvägar och landsvägar) där estimeringar av körfältsgränser för avstånd över 75 meter behövs. Resultaten utförs i en simulerad miljö och visar hur det kartbaserade systemet kan korrigera opålitlig sensorinmatning för att ge mer exakta gränsuppskattningar. Systemet kan också ge en upp till 36% relativ ökning av korrekt identifierade objekt inom ego-fordonets körfält mellan 12.5-150 meter framför ego-fordonet. Resultaten indikerar förmågan att förlänga horisonten som förarassistansfunktioner kan fungera i, vilket ökar säkerheten för framtida autonoma eller halvautonoma fordon. Framtida arbeten inom ämnet behövs för att tillämpa kartbaserade uppskattningar på tätorter. Precisionen hos ett sådant system är också beroende av mer exakt positionsdata. Inkorporering av mer exakt global navigationsdata skulle i detta fall kunna visa en ökad sytemprestanda.

No description available.

Les systèmes de perception, qui sont à la base du concept du véhicule intelligent, doivent répondre à des critères de performance à plusieurs niveaux afin d’assurer des fonctions d’aide à la conduite et/ou de conduite autonome. Aujourd’hui, la majorité des systèmes de perception pour véhicules intelligents sont basés sur la combinaison de données issues de plusieurs capteurs (caméras, lidars, radars, etc.). Les travaux de cette thèse concernent le développement d’un système de perception à base d’un capteur de vision stéréoscopique et d’un capteur lidar pour l’analyse de scènes dynamiques en environnement urbain. Les travaux présentés sont divisés en quatre parties.La première partie présente une méthode d’odométrie visuelle basée sur la stéréovision, avec une comparaison de différents détecteurs de primitives et différentes méthodes d’association de ces primitives. Un couple de détecteur et de méthode d’association de primitives a été sélectionné sur la base d’évaluation de performances à base de plusieurs critères. Dans la deuxième partie, les objets en mouvement sont détectés et segmentés en utilisant les résultats d’odométrie visuelle et l’image U-disparité. Ensuite, des primitives spatiales sont extraites avec une méthode basée sur la technique KPCA et des classifieurs sont enfin entrainés pour reconnaitre les objets en mouvement (piétons, cyclistes, véhicules). La troisième partie est consacrée au calibrage extrinsèque d’un capteur stéréoscopique et d’un Lidar. La méthode de calibrage proposée, qui utilise une mire plane, est basée sur l’exploitation d’une relation géométrique entre les caméras du capteur stéréoscopique. Pour une meilleure robustesse, cette méthode intègre un modèle de bruit capteur et un processus d’optimisation basé sur la distance de Mahalanobis. La dernière partie de cette thèse présente une méthode de construction d’une grille d’occupation dynamique en utilisant la reconstruction 3D de l’environnement, obtenue des données de stéréovision et Lidar de manière séparée puis conjointement. Pour une meilleure précision, l’angle entre le plan de la chaussée et le capteur stéréoscopique est estimé. Les résultats de détection et de reconnaissance (issus des première et deuxième parties) sont incorporés dans la grille d’occupation pour lui associer des connaissances sémantiques. Toutes les méthodes présentées dans cette thèse sont testées et évaluées avec la simulation et avec de données réelles acquises avec la plateforme expérimentale véhicule intelligent SetCar” du laboratoire IRTES-SET. / Intelligent vehicles require perception systems with high performances. Usually, perception system consists of multiple sensors, such as cameras, 2D/3D lidars or radars. The works presented in this Ph.D thesis concern several topics on cameras and lidar based perception for understanding dynamic scenes in urban environments. The works are composed of four parts.In the first part, a stereo vision based visual odometry is proposed by comparing several different approaches of image feature detection and feature points association. After a comprehensive comparison, a suitable feature detector and a feature points association approach is selected to achieve better performance of stereo visual odometry. In the second part, independent moving objects are detected and segmented by the results of visual odometry and U-disparity image. Then, spatial features are extracted by a kernel-PCA method and classifiers are trained based on these spatial features to recognize different types of common moving objects e.g. pedestrians, vehicles and cyclists. In the third part, an extrinsic calibration method between a 2D lidar and a stereoscopic system is proposed. This method solves the problem of extrinsic calibration by placing a common calibration chessboard in front of the stereoscopic system and 2D lidar, and by considering the geometric relationship between the cameras of the stereoscopic system. This calibration method integrates also sensor noise models and Mahalanobis distance optimization for more robustness. At last, dynamic occupancy grid mapping is proposed by 3D reconstruction of the environment, obtained from stereovision and Lidar data separately and then conjointly. An improved occupancy grid map is obtained by estimating the pitch angle between ground plane and the stereoscopic system. The moving object detection and recognition results (from the first and second parts) are incorporated into the occupancy grid map to augment the semantic meanings. All the proposed and developed methods are tested and evaluated with simulation and real data acquired by the experimental platform “intelligent vehicle SetCar” of IRTES-SET laboratory.