It is the study of banded iron formations (BIFs) that provides understanding into the conditions of the Earth's oceans and atmosphere during the Archean and Early Proterozoic. The aim of this thesis is to provide a detailed mineralogical and geochemical understand of BIFs from two separate localities separated by the Archean Proterozoic boundary. Close attention is paid to their carbonate and iron oxide mineralogy.The BIFs of the 2.7 Ga Manjeri Formation, Zimbabwe and 2.4 Ga Itabira Group, Brazil were both precipitated from oxygenated mixed marine-hydrothermal fluids. This is demonstrated by the presence of nano-hematite inclusions in the chert (Itabira and Manjeri) and dolomite (Itabira only) laminae, which is interpreted as the oldest mineral phase within the samples. Additionally, focused ion beam transmission electron microscopy (FIB-TEM) reveals the presence of nano ferrihydrite platelets within the dolomitic BIFs (carbonate itabirite). The dolomite is interpreted to be a primary phase precipitated at higher temperatures (~100°C) from CO2-rich hydrothermal fluids. Positive Eu anomalies in both formations indicate a hydrothermal component, likely to be the source of the reduced iron. Facies changes in both units are the result of transgression/regression and post depositional hydrothermal events mask primary conditions. Iron-rich carbonates in both facies have different origins; diagenetic (Itabira) and post depositional hydrothermal (Manjeri). However, the iron-rich carbonates of both formations have negative ∂13C values, indicating that at least part of the carbon in the carbonates is of organic origin. Curie Balance analyses into the carbonate itabirite reveals that maghemite is the transformation product of the ferrihydrite when dolomite decomposes at ~790°C. The maghemite has a Curie temperature between 320 and 350°C and is stable up to temperatures of 925°C.FIB-TEM investigations into the martitisation process revealed two possible mechanisms from two martite samples, from Brazil and India. Depending of the cause of the martitisation, here found to be deformation and hydrothermalism, the martitisation occurs respectively via either: 1. Ordering of point defects caused by vacancies in the spinel structure of maghemite, due to the removal of excess Fe3+ ions during the oxidation of magnetite, to form twins. It is in this twinning that the martitisation mechanism occurs.2. Grain boundary migration by hematite at the expense of magnetite is due to the presence of fluid along the crystal interfaces, where maghemite forms due to excess Fe3+ produced during martitisation of the magnetite, moving towards the surface of the magnetite crystals.

The Comet Gold Mine is in the Murchison mineral field which lies within the Yilgarn Craton of Western Australia. Several different geophysical methods were used in this study to define the geophysical signatures of sedimentary iron formations (SIF) and altered basalt associated with gold mineralisation. The geophysical surveys carried out at the Comet Gold Mine were gravity, sub-audio magnetics (SAM), transient electromagnetics (TEM) and downhole geophysical logging. Data from previous geophysical surveying were also used, and these included highresolution aeromagnetics and TEMPEST airborne electromagnetics. Other exploration information, such as geology and drillhole data, were integrated with geophysical results to study the geophysical responses and generate a geophysical interpretation map. / The main aim of this study was to generate an understanding of the various geophysical responses of geology and gold mineralisation in the Comet Mine area for future gold exploration in this region. Particularly, the study focused on the ability of the SAM method to map out geology and geophysical response for gold mineralisation. The response from SAM surveying has been investigated over an area of 13 sq kms. The SAM surveying was completed using a transmitter current of 5-8 Amp with a 50% duty cycle at 4 Hz frequency, which was considered the best setting for the Comet area. The SAM anomalies were compared to results from other geophysical methods. The results of all geophysical surveying suggested that the TEM method was also effective for identifying altered sulphide and magnetic altered rock associated with gold mineralisation. / Experiments were carried out using SAM surveying with electrodes in standard surface pits and pits placed directly into the gold mineralised structure. Both surveys showed very similar results, so in this area, surface electrode pits work well for current injection during SAM surveys. The similarities are probably due to the lack of conductive regolith cover in the Comet Mine area. / The SAM response was studied for survey grids using different electrode positions and directions. Experiments in changing SAM electrode position over the same area were carried out along and across geological strike to detect the different geological structure directions. The EQMMR response was different for electrodes oriented at 90º when surveys were repeated over the same area. SAM mainly measures conductive features running sub-parallel to the electrode direction, but the EQMMIP response was mostly the same, despite the difference in electrode direction. In addition, the EQMMIP result was very similar for rotated grids, with some distortion occurring around the main EQMMR anomaly near the Venus open cut pit. Therefore, SAM chargeability was not strongly polarised along the electrode direction like the EQMMR response. This is consistent with the theory of MIP that the method detects the effect of induced polarisation in the earth by virtue of the magnetic fields associated with current flow in polarisable bodies within the earth. / Gravity data were collected along in 4 transects 500 m apart and at 50 m station spacing. 3D gravity modelling using polygonal shapes was completed to a good fit with felsic and mafic rocks by having rock units dip to the SE. Euler depth solution calculations were applied to locate contacts and deep gravity sources. Gravity surveying has also proved to be a useful survey method for geological mapping and locating regional structures. / Ground TEM survey data were used at the Venus prospect to map out conductive zones at depths ranging from 30 to 90 m. All anomaly bodies were interpreted to have a SE dip. The modelled ground TEM results were compared to TEMPEST airborne electromagnetic conductivity depth slices. Both EM survey results showed reasonably similar patterns, but the ground TEM method provided more reliable conductor locations and depth estimations that correlated well with the drilling information and downhole conductivity logging. / Geophysical logs of natural gamma and inductive conductivity were surveyed in 5 drillholes that intersected gold alteration zones. The alteration zones associated with gold mineralised sediments, sulphide and magnetic minerals were identified in the downhole logs as increased conductivity, with a sight increase in the natural gamma response. Natural gamma was usually high above a background of host rock in the gold mineralised shear zones. This was likely due to K associated with the clay rich SIF units, and sericite and biotite from gold related alteration. During this study, drillhole CTRC028 was drilled into a modelled TEM anomaly, and gold mineralised SIF was intersected at the predicted location from the model. / Geophysical survey information (magnetics, gravity, SAM and TEM) and anomalies in the Comet area were found to be primarily controlled by the local structures and mineralisation along these structures. Modelled ground TEM results were compared to TEMPEST airborne, EM data and showed reasonably similar patterns. The geophysical survey data also highlights black shale units, which can produce a false target commonly running parallel to the sulphide altered fault zones and SIF units, because of graphite and sulphide in the black shale. / The TEMPEST data were a valuable guide to bedrock conductivity over the outline project area at Comet, and the follow–up ground TEM and SAM survey data was very useful for accurately pin-pointing anomalies for drill testing. / Geophysical and geological data analysed in this study was used to generate a geophysical interpretation map at 1:5,000 scale. The new interpretation of geological units and structures at Comet will provide geologists with a better understand about the geological and structural setting for mineralisation in the Comet area. For example, the Comet Fault represents a faulted limb of the Comet fold structure that has both limbs dipping to the SE, and plunges to the NE. Magnetic anomalies associated with SIF are considered to correlate with some gold bearing horizons and the location of the Comet Fault, that has become more siliceous and altered by sulphide minerals and magnetite minerals. / It is recommended that other prospect areas in the region should be surveyed using the SAM method in order to identify shallow gold bearing structures and improve geological interpretations ahead of drilling.

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior / A formação ferrífera do Serrote do Breu e de Alto das Pedras localiza-se no município de Campo Grande, Estado de Alagoas e está sendo pesquisada quanto ao seu potencial como minério de ferro. Ela está inserida em um domo de embasamento arqueano no interior da Faixa Sergipana, o Domo de Jirau de Ponciano. A área de estudo é caracterizada por dois altos topográficos denominados Serrote do Breu e Alto das Pedras, sustentados pela formação ferrífera, e que representam flancos opostos de um sinformal inclinado, com direção N60W e forte mergulho para sul, e extensão total de aproximadamente 2 km. A formação ferrífera ocorre em diversas camadas intercaladas em gnaisses quartzo-feldspáticos e em rochas metamáficas. Os primeiros foram agrupados na unidade de gnaisses quartzo-feldspáticos e as últimas na suíte intrusiva máfica-ultramáfica. Na porção interior do sinformal estão quartzitos e paragnaisses agrupados na unidade metassedimentar e cortando essas unidades há uma unidade de pegmatitos. A formação ferrífera é constituída por quartzo, hematita, anfibólio e magnetita. O anfibólio é em geral cummingtonita, mas riebeckita também ocorre subordinadamente. Os teores médios de SiO2, e Fe2O3t são 43,1% e 50,7%, respectivamente, e, assim como os demais elementos maiores, são compatíveis com outras formações ferríferas do mundo. Com base na petrografia e geoquímica de elementos terras raras os gnaisses quartzo-feldspáticos foram divididos em gnaisses bandados e gnaisses com titanita. Ambos apresentam composição riolítica e trend calcio-alcalino. Já as rochas metamáficas e metaultramáficas apresentam composição basáltica a andesítica e trend toleítico completamente dissociado daquele dos gnaisses. Acredita-se que os gnaisses quartzo-feldspáticos e as rochas metamáficas e metaultramáficas tenham se formado em ambientes tectônicos totalmente distintos, com as últimas tendo se formado provavelmente intrusivas nos primeiros. / Serrote do Breu and Alto das Pedras are located in the municipality of Campo Grande, in the State of Alagoas where an iron-formation occurs. It is currently being explored for its potential for hosting an iron ore deposit. It is tectonically settled inside Jirau do Ponciano Dome, an Archean basement within Sergipano Belt. Serrote do Breu and Alto das Pedras are two topographic highs totaling 2 km in length, marked by outcrops of iron-formation which represent opposite limbs of an inclined sinformal elongated N60W and dipping steeply to the South. This iron-formation comprises of several layers intercalated with quartz-feldspathic and metamafic rocks. The former were grouped into quartz-feldspathic gneisses unit and the latter into mafic-ultramafic intrusive suite. Quartzites and paragneisses were mapped and grouped into metasedimentary unit and all units are cross-cutted by pegmatites unit. Iron-formation is constituted by quartz, hematite, amphibole and magnetite. Amphibole is commonly cummingtonite, but riebeckite also occurs. Average grades for SiO2 and Fe2O3t are 43,1% and 50,7%, respectively, and along with other major elements, are similar to other iron-formations of the world. Considering petrographical and geochemical data, quartz-feldspathic gneisses were divided into banded gneisses and sphene-bearing gneisses although both presents rhyolitic composition and calc-alkaline trends. Metamafic and metaultramafic rocks present basaltic to andesitic composition and show a tholeiitic trend completely different from that of gneisses. It is proposed here that these distinct rocks were formed in completely different tectonic settings with the latter being probably intrusive in the former.

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior / A formação ferrífera do Serrote do Breu e de Alto das Pedras localiza-se no município de Campo Grande, Estado de Alagoas e está sendo pesquisada quanto ao seu potencial como minério de ferro. Ela está inserida em um domo de embasamento arqueano no interior da Faixa Sergipana, o Domo de Jirau de Ponciano. A área de estudo é caracterizada por dois altos topográficos denominados Serrote do Breu e Alto das Pedras, sustentados pela formação ferrífera, e que representam flancos opostos de um sinformal inclinado, com direção N60W e forte mergulho para sul, e extensão total de aproximadamente 2 km. A formação ferrífera ocorre em diversas camadas intercaladas em gnaisses quartzo-feldspáticos e em rochas metamáficas. Os primeiros foram agrupados na unidade de gnaisses quartzo-feldspáticos e as últimas na suíte intrusiva máfica-ultramáfica. Na porção interior do sinformal estão quartzitos e paragnaisses agrupados na unidade metassedimentar e cortando essas unidades há uma unidade de pegmatitos. A formação ferrífera é constituída por quartzo, hematita, anfibólio e magnetita. O anfibólio é em geral cummingtonita, mas riebeckita também ocorre subordinadamente. Os teores médios de SiO2, e Fe2O3t são 43,1% e 50,7%, respectivamente, e, assim como os demais elementos maiores, são compatíveis com outras formações ferríferas do mundo. Com base na petrografia e geoquímica de elementos terras raras os gnaisses quartzo-feldspáticos foram divididos em gnaisses bandados e gnaisses com titanita. Ambos apresentam composição riolítica e trend calcio-alcalino. Já as rochas metamáficas e metaultramáficas apresentam composição basáltica a andesítica e trend toleítico completamente dissociado daquele dos gnaisses. Acredita-se que os gnaisses quartzo-feldspáticos e as rochas metamáficas e metaultramáficas tenham se formado em ambientes tectônicos totalmente distintos, com as últimas tendo se formado provavelmente intrusivas nos primeiros. / Serrote do Breu and Alto das Pedras are located in the municipality of Campo Grande, in the State of Alagoas where an iron-formation occurs. It is currently being explored for its potential for hosting an iron ore deposit. It is tectonically settled inside Jirau do Ponciano Dome, an Archean basement within Sergipano Belt. Serrote do Breu and Alto das Pedras are two topographic highs totaling 2 km in length, marked by outcrops of iron-formation which represent opposite limbs of an inclined sinformal elongated N60W and dipping steeply to the South. This iron-formation comprises of several layers intercalated with quartz-feldspathic and metamafic rocks. The former were grouped into quartz-feldspathic gneisses unit and the latter into mafic-ultramafic intrusive suite. Quartzites and paragneisses were mapped and grouped into metasedimentary unit and all units are cross-cutted by pegmatites unit. Iron-formation is constituted by quartz, hematite, amphibole and magnetite. Amphibole is commonly cummingtonite, but riebeckite also occurs. Average grades for SiO2 and Fe2O3t are 43,1% and 50,7%, respectively, and along with other major elements, are similar to other iron-formations of the world. Considering petrographical and geochemical data, quartz-feldspathic gneisses were divided into banded gneisses and sphene-bearing gneisses although both presents rhyolitic composition and calc-alkaline trends. Metamafic and metaultramafic rocks present basaltic to andesitic composition and show a tholeiitic trend completely different from that of gneisses. It is proposed here that these distinct rocks were formed in completely different tectonic settings with the latter being probably intrusive in the former.

L’Archéen, de 4 à 2,5 Ga, est la période qui a connu les plus grands bouleversements géologiques et biologiques de l’histoire de la Terre : formation des continents, transition d’une tectonique à composante verticale vers une tectonique des plaques horizontale, apparition de la vie, … Le but de cette thèse est d’étudier les conditions environnementales de la Terre à l’Archéen, par l’analyse des compositions isotopiques de métaux de transition (Fe, Zn) de roches provenant principalement de la province d’Isua au Groenland (3,8 Ga). Après avoir adapté le protocole de séparation du Fe, Cu, Zn à des échantillons riches en Fe, nous avons acquis les données par spectrométrie de masse à source plasma et à multicollection MC-ICPMS. Nous nous sommes d’abord intéressés au processus de serpentinisation de la croûte océanique, réaction produisant à la fois des nutriments pour la vie (CH 4 , H 2 ) et des minéraux catalyseurs (mackinawite) de la formation abiotique d’acides aminés, molécules du vivant. L’affleurement d’Isua comporte une unité ophiolitique présentant les serpentinites les plus anciennes (3.81-3.70 Ga) : leur analyse permet d’appréhender la réaction de serpentinisation à l’Archéen. Les résultats obtenus pour la composition isotopique du zinc dans ces roches et dans des serpentinites modernes ont permis d’établir une correspondance entre le processus de serpentinisation à Isua et la mise en place de volcans de boues de serpentinites à l’aplomb de la fosse des Mariannes. Nous avons ainsi pu identifier Isua comme une zone d’arrière-arc de subduction océanique, lieu d’une serpentinisation produisant des fluides de température variable (100-300°C) et de pH alcalin (9-12). Nous montrons que cette configuration atypique réunissant serpentinisation, fluides alcalins et édifices volcaniques est favorable à l’émergence du vivant. Nous avons ensuite analysé de nombreux échantillons de formations de fer rubané (BIFs), sédiments propres à l’Archéen et au début du Protérozoïque. L’évolution de la composition isotopique du zinc de ces échantillons au cours du temps a permis d’établir une chronologie de l'émersion des continents.Nos résultats sont en faveur d’une émersion débutant il y a 2,9 Ga. Enfin, nos données nous informent sur la colonisation des continents émergés par la vie à 2,6 Ga et sur la pédogenèse de sols archéens comportant un horizon organique. / During the Archean (4 to 2.5 Ga ago), the Earth experienced the biggest changes in terms of geological and biological settings – continental growth, transition from sagduction towards purely horizontal plate tectonics, emergence of life, … The purpose of the present study is to better understand the archean earth environment by measuring the isotopic composition of transition metals – Zn, Fe – of archean rocks. Most of the samples belong to the Isua supracrustal belt, in Greenland, dated 3.8 Ga. The chemical extraction protocol of Fe, Cu, Zn was adapted to our Fe-rich samples and isotopic analyses were conducted by multicollection inductively coupled plasma mass spectrometry. The serpentinization of the oceanic crust produces fuels for life (CH 4 , H 2 ) and mackinawite, which catalyses formation of complex organic compounds. Serpentinization may thus provide a suitable environment for the emergence of the first biomolecules. We analysed the oldest known serpentinites from Isua (3.81-3.70 Ga) to comprehend the archean serpentinization process. The isotopic compositions of zinc reported in this samples and in modern serpentinites attest to a strong similarity between Isua and the Mariana serpentinite mud volcanoes. We identified Isua as an oceanic forearc environment permeated by high-pH (9-12) hydrothermal solutions at medium temperature (100-300°C). We show that such an environment could have fostered the emergence of early life. We also analyzed several banded iron formations (BIF), which are sediments limited to the Archean and Proterozoic. The temporal evolution of these samples' isotopic composition shows a close relationship with the continental freeboard. Our results support the continental emersion starting 2.9 Ga ago. Besides, we identified the life colonization of continents at 2.6 Ga together with pedogenesis of archean soils with an organic horizon.

L’étude des formations de fer rubané (BIF) permet de comprendre les conditions des océans de et de l’atmosphère terrestres au cours de l’Archéen et du début du Protérozoïque. L’objectif de cette thèse est de fournir une analyse minéralogique et géochimique détaillée de BIFs de deux localités distinctes, séparées par la frontière Archéen-Protérozoïque. Une attention particulière est portée à la minéralogie de leurs carbonates et oxydes de fer. Les BIFs de 2,7 Ga de la formation Manjeri, Zimbabwe et de 2,4 Ga du Groupe Itabira, Brésil, ont dans les deux cas été précipités par mélange de fluides hydrothermaux marins oxygénés. Ceci est démontré par la présence d’inclusions de nano-hématite dans les lames de chert (Itabira et Manjeri) et de dolomite (Itabira seulement), qui sont interprétées comme la phase minérale la plus ancienne dans les échantillons. En outre, la microscopie électronique à transmission à faisceau d’ions focalisé (FIB-TEM) révèle la présence de plaquettes de nano ferrihydrite dans les BIF dolomitiques (carbonate d’itabirite). La dolomite est interprétée comme étant une phase primaire précipitée à des températures plus élevées (~100°C) de fluides hydrothermaux riches en CO2. Des anomalies positives en Eu dans les deux formations indiquent une composante hydrothermale, susceptible d’être la source du fer réduit. Les changements de faciès dans les deux unités sont le résultat de transgression/régression; et des évènements hydrothermaux post dépôt masquent les conditions primaires. Les carbonates riches en fer dans les deux faciès ont différentes origines: diagénétiques (Itabira) et hydrothermales post dépôt (Manjeri). Toutefois, les carbonates riches en fer des deux formations ont des valeurs négatives de ∂13C, ce qui indique qu’au moins une partie du carbone dans les carbonates est d’origine organique.Des analyses en balance de Curie dans le carbonate d’itabirite révèlent que la maghémite est le produit de transformation de la ferrihydrite lorsque de la dolomite se décompose à ~790°C. La maghémite a une température de Curie comprise entre 320 et 350°C et est stable jusqu’à une température de 925°C. Les analyses en FIB-TEM sur le processus de martitisation ont révélé deux mécanismes possibles à partir de deux échantillons de martite provenant respectivement du Brésil et d’Inde. En fonction de la cause de la martitisation, que nous avons déterminé être soit la déformation soit l’hydrothermalisme, la martitisation se produit respectivement par l’intermédiaire de:1. La réorganisation de défauts ponctuels, pour former des jumeaux. Ces défauts sont causés par les vacances dans la structure spinelle de la maghémite, dues à la suppression des ions Fe3+ en excès au cours de l’oxydation de la magnétite. C’est dans ce jumelage que le mécanisme de martitisation se produit.2. La migration des joints de grains par l’hématite au détriment de la magnétite, qui est due à la présence de fluide le long des interfaces du cristal. La maghémite se forme en raison de l’excès de Fe3+ produit pendant la martitisation de la magnétite, qui se déplace vers la surface des cristaux de magnétite. / It is the study of banded iron formations (BIFs) that provides understanding into the conditions of the Earth’s oceans and atmosphere during the Archean and Early Proterozoic. The aim of this thesis is to provide a detailed mineralogical and geochemical understand of BIFs from two separate localities separated by the Archean Proterozoic boundary. Close attention is paid to their carbonate and iron oxide mineralogy.The BIFs of the 2.7 Ga Manjeri Formation, Zimbabwe and 2.4 Ga Itabira Group, Brazil were both precipitated from oxygenated mixed marine-hydrothermal fluids. This is demonstrated by the presence of nano-hematite inclusions in the chert (Itabira and Manjeri) and dolomite (Itabira only) laminae, which is interpreted as the oldest mineral phase within the samples. Additionally, focused ion beam transmission electron microscopy (FIB-TEM) reveals the presence of nano ferrihydrite platelets within the dolomitic BIFs (carbonate itabirite). The dolomite is interpreted to be a primary phase precipitated at higher temperatures (~100°C) from CO2-rich hydrothermal fluids. Positive Eu anomalies in both formations indicate a hydrothermal component, likely to be the source of the reduced iron. Facies changes in both units are the result of transgression/regression and post depositional hydrothermal events mask primary conditions. Iron-rich carbonates in both facies have different origins; diagenetic (Itabira) and post depositional hydrothermal (Manjeri). However, the iron-rich carbonates of both formations have negative ∂13C values, indicating that at least part of the carbon in the carbonates is of organic origin. Curie Balance analyses into the carbonate itabirite reveals that maghemite is the transformation product of the ferrihydrite when dolomite decomposes at ~790°C. The maghemite has a Curie temperature between 320 and 350°C and is stable up to temperatures of 925°C.FIB-TEM investigations into the martitisation process revealed two possible mechanisms from two martite samples, from Brazil and India. Depending of the cause of the martitisation, here found to be deformation and hydrothermalism, the martitisation occurs respectively via either: 1. Ordering of point defects caused by vacancies in the spinel structure of maghemite, due to the removal of excess Fe3+ ions during the oxidation of magnetite, to form twins. It is in this twinning that the martitisation mechanism occurs.2. Grain boundary migration by hematite at the expense of magnetite is due to the presence of fluid along the crystal interfaces, where maghemite forms due to excess Fe3+ produced during martitisation of the magnetite, moving towards the surface of the magnetite crystals.