In this thesis work construction of the angular acceleration signal of a 2-DOF gimbal platform and use of this signal for improving the stabilization performance is aimed. This topic can be divided into two subtopics, first being the construction of angular acceleration and the second being the use of this information in a way to improve system performance. Both problems should be tackled in order to get satisfactory results. The most important output of this work is defined as the demonstration of the improvements obtained both theoretically and on experimental setup. Although the system to be studied is a two axis gimbal platform, the results obtained can be applied to other servo control problems. It is possible to define different performance criteria for a servo control problem and different techniques will be addressed with different control objectives. For this thesis work, the performance criterion is defined as the stabilization performance of the platform. As a result, disturbance rejection characteristics of the controller emerges as the main topic and methods for rejecting these disturbances such as the friction torques and externally applied moments are focused on throughout the studies. As expected, remarkable improvement is achieved as a result of the use of acceleration feedback.

In this thesis, high performance torque and speed control for a surface-mounted permanent magnet synchronous machine (PMSM) is designed, simulated and implemented. A three-phase two-level pulse width modulation voltage-source inverter (PWM-VSI) with power MOSFETs is used to feed the PMSM. The study has three objectives. The first is to compensate the voltage disturbance caused by nonideal characteristics of the voltage-source inverter (VSI). The second is to decouple the coupled variables in the synchronous reference frame model of the PMSM. The last is to design a load torque estimator in order to increase the disturbance rejection capability of the speed control. The angular acceleration required for load torque estimation is extracted through a Kalman filter from noisy velocity measurements. Proposed methods for improved torque and speed control performance are verified through simulations and experimental tests. The drive system is modeled in Matlab/Simulink, and control algorithms are developed based on this model. The experimental drive system comprises a three-phase VSI and a 385 W surface-mounted PMSM. Control algorithms developed in the study have been implemented in a digital signal processor (DSP) board and tested comprehensively. With the use of the proposed methods, a considerable improvement of torque and speed control performance has been achieved.

In this dissertation, we present new approaches to improve standard designs in adaptive control theory, and novel adaptive control architectures. We first present a novel Kalman filter based approach for approximately enforcing a linear constraint in standard adaptive control design. One application is that this leads to alternative forms for well known modification terms such as e-modification. In addition, it leads to smaller tracking errors without incurring significant oscillations in the system response and without requiring high modification gain. We derive alternative forms of e- and adaptive loop recovery (ALR-) modifications. Next, we show how to use Kalman filter optimization to derive a novel adaptation law. This results in an optimization-based time-varying adaptation gain that reduces the need for adaptation gain tuning. A second major contribution of this dissertation is the development of a novel derivative-free, delayed weight update law for adaptive control. The assumption of constant unknown ideal weights is relaxed to the existence of time-varying weights, such that fast and possibly discontinuous variation in weights are allowed. This approach is particularly advantageous for applications to systems that can undergo a sudden change in dynamics, such as might be due to reconfiguration, deployment of a payload, docking, or structural damage, and for rejection of external disturbance processes. As a third and final contribution, we develop a novel approach for extending all the methods developed in this dissertation to the case of output feedback. The approach is developed only for the case of derivative-free adaptive control, and the extension of the other approaches developed previously for the state feedback case to output feedback is left as a future research topic. The proposed approaches of this dissertation are illustrated in both simulation and flight test.

Thesis--Technische Universität Darmstadt, 2008. / Includes bibliographical references.

In the central nervous system, most of the processes ranging from ion channels to neuronal networks occur in a closed loop, where the input to the system depends on its output. In contrast, most experimental preparations and protocols operate autonomously in an open loop and do not depend on the output of the system. Real-time software technology can be an essential tool for understanding the dynamics of many biological processes by providing the ability to precisely control the spatiotemporal aspects of a stimulus and to build activity-dependent stimulus-response closed loops. So far, application of this technology in biological experiments has been limited primarily to the dynamic clamp, an increasingly popular electrophysiology technique for introducing artificial conductances into living cells. Since the dynamic clamp combines mathematical modeling with electrophysiology experiments, it inherits the limitations of both, as well as issues concerning accuracy and stability that are determined by the chosen software and hardware. In addition, most dynamic clamp systems to date are designed for specific experimental paradigms and are not easily extensible to general real-time protocols and analyses. The long-term goal of this research is to develop a suite of real-time tools to evaluate the performance, improve the efficacy, and extend the capabilities of the dynamic clamp technique and real-time neural electrophysiology. We demonstrate a combined dynamic clamp and modeling approach for studying synaptic integration, a software platform for implementing flexible real-time closed-loop protocols, and the potential and limitations of Kalman filter-based techniques for online state and parameter estimation of neuron models.

In recent years, trade activity in stock markets has increased substantially. This is mainly attributed to the development of powerful computers and intranets connecting traders to markets across the globe. The trades have to be carried out almost instantaneously and the systems in place that handle trades are burdened with millions of transactions a day, several thousand a minute. With increasing transactions the time to execute a single trade increases, and this can be seen as an impact on the performance. There is a need to model the performance of these systems and provide forecasts to give a heads up on when a system is expected to be overwhelmed by transactions. This was done in this study, in cooperation with Cinnober Financial Technologies, a firm which provides trading solutions to stock markets. To ensure that the models developed weren‟t biased, the dataset was cleansed, i.e. operational and other transactions were removed, and only valid trade transactions remained. For this purpose, a descriptive analysis of time series along with change point detection and LOESS regression were used. State space model with Kalman Filtering was further used to develop a time varying coefficient model for the performance, and this model was applied to make forecasts. Wavelets were also used to produce forecasts, and besides this high pass filters were used to identify low performance regions. The State space model performed very well to capture the overall trend in performance and produced reliable forecasts. This can be ascribed to the property of Kalman Filter to handle noisy data well. Wavelets on the other hand didn‟t produce reliable forecasts but were more efficient in detecting regions of low performance.

<p>Brain-machine interfaces (BMI) are systems which connect brains directly to machines or computers for communication. BMI-controlled prosthetic devices use algorithms to decode neuronal recordings into movement commands. These algorithms operate using models of how recorded neuronal signals relate to desired movements, called models of tuning. Models of tuning have typically been linear in prior work, due to the simplicity and speed of the algorithms used with them. Neuronal tuning has been shown to slowly change over time, but most prior work do not adapt tuning models to these changes. Furthermore, extracellular electrical recordings of neurons' action potentials slowly change over time, impairing the preprocessing step of spike-sorting, during which the neurons responsible for recorded action potentials are identified.</p> <p></p> <p>This dissertation presents a non-linear adaptive Bayesian filter and an adaptive spike-sorting method for BMI decoding. The adaptive filter consists of the n-th order unscented Kalman filter and Bayesian regression self-training updates. The unscented Kalman filter estimates desired prosthetic movements using a non-linear model of tuning as its observation model. The model is quadratic with terms for position, velocity, distance from center of workspace, and velocity magnitude. The tuning model relates neuronal activity to movements at multiple time offsets simultaneously, and the movement model of the filter is an order n autoregressive model.</p> <p>To adapt the tuning model parameters to changes in the brain, Bayesian regression self-training updates are performed periodically. Tuning model parameters are stored as probability distributions instead of point estimates. Bayesian regression uses the previous model parameters as priors and calculates the posteriors of the regression between filter outputs, which are assumed to be the desired movements, and neuronal recordings. Before each update, filter outputs are smoothed using a Kalman smoother, and tuning model parameters are passed through a transition model describing how parameters change over time. Two variants of Bayesian regression are presented: one uses a joint distribution for the model parameters which allows analytical inference, and the other uses a more flexible factorized distribution that requires approximate inference using variational Bayes.</p> <p>To adapt spike-sorting parameters to changes in spike waveforms, variational Bayesian Gaussian mixture clustering updates are used to update the waveform clustering used to calculate these parameters. This Bayesian extension of expectation-maximization clustering uses the previous clustering parameters as priors and computes the new parameters as posteriors. The use of priors allows tracking of clustering parameters over time and facilitates fast convergence.</p> <p>To evaluate the proposed methods, experiments were performed with 3 Rhesus monkeys implanted with micro-wire electrode arrays in arm-related areas of the cortex. Off-line reconstructions and on-line, closed-loop experiments with brain-control show that the n-th order unscented Kalman filter is more accurate than previous linear methods. Closed-loop experiments over 29 days show that Bayesian regression self-training helps maintain control accuracy. Experiments on synthetic data show that Bayesian regression self-training can be applied to other tracking problems with changing observation models. Bayesian clustering updates on synthetic and neuronal data demonstrate tracking of cluster and waveform changes. These results indicate the proposed methods improve the accuracy and robustness of BMIs for prosthetic devices, bringing BMI-controlled prosthetics closer to clinical use.</p> / Dissertation

Uncalibrated visual servoing (VS) can improve robot performance without needing camera and robot parameters. Multiple cameras improve uncalibrated VS precision, but no works exist simultaneously using more than two cameras. The first data for uncalibrated VS simultaneously using more than two cameras are presented. VS performance is also compared for two different camera models: a high-cost camera and a low-cost camera, the difference being image noise magnitude and focal length. A Kalman filter based control law for uncalibrated VS is introduced and shown to be stable under the assumptions that robot joint level servo control can reach commanded joint offsets and that the servoing path goes through at least one full column rank robot configuration. Adaptive filtering by a covariance matching technique is applied to achieve automatic camera weighting, prioritizing the best available data. A decentralized sensor fusion architecture is utilized to assure continuous servoing with camera occlusion. The decentralized adaptive Kalman filter (DAKF) control law is compared to a classical method, Gauss-Newton, via simulation and experimentation. Numerical results show that DAKF can improve average tracking error for moving targets and convergence time to static targets. DAKF reduces system sensitivity to noise and poor camera placement, yielding smaller outliers than Gauss-Newton. The DAKF system improves visual servoing performance, simplicity, and reliability.

The performance of a program can sometimes greatly improve if it was known in advance the features of the input the program is supposed to process, the actual operating parameters it is supposed to work with, or the specific environment it is to run on. However, this information is typically not available until too late in the program’s operation to take advantage of it. This is especially true for simulation algorithms, which are sensitive to this late-arriving information, and whose role in the solution of decision-making, inference and valuation problems is crucial. To overcome this limitation we need to provide the flexibility for a program to adapt its behaviour to late-arriving information once it becomes available. In this thesis, I study three adaptation mechanisms: run-time code generation, model-specific (quasi) Monte Carlo sampling and dynamic computation offloading, and evaluate their benefits on Monte Carlo algorithms. First, run-time code generation is studied in the context of Monte Carlo algorithms for time-series filtering in the form of the Input-Adaptive Kalman filter, a dynamically generated state estimator for non-linear, non-Gaussian dynamic systems. The second adaptation mechanism consists of the application of the functional-ANOVA decomposition to generate model-specific QMC-samplers which can then be used to improve Monte Carlo-based integration. The third adaptive mechanism treated here, dynamic computation offloading, is applied to wireless communication management, where network conditions are assessed via option valuation techniques to determine whether a program should offload computations or carry them out locally in order to achieve higher run-time (and correspondingly battery-usage) efficiency. This ability makes the program well suited for operation in mobile environments. At their core, all these applications carry out or make use of (quasi) Monte Carlo simulations on dynamic Bayesian networks (DBNs). The DBN formalism and its associated simulation-based algorithms are of great value in the solution to problems with a large uncertainty component. This characteristic makes adaptation techniques like those studied here likely to gain relevance in a world where computers are endowed with perception capabilities and are expected to deal with an ever-increasing stream of sensor and time-series data.

Thesis (Ph. D.)--University of Missouri-Columbia, 2002. / Typescript. Vita. Includes bibliographical references (leaves 79-81). Also available on the Internet.