Uma metodologia para simular o crescimento de trincas por fadiga em estruturas pressurizadas de cascas delgadas e enrijecidas é implementada por meio de uma estrutura de software, que consiste em um programa de simulação de fraturamento associado a um programa de análise por elementos finitos. Permite-se que as trajetórias das trincas sejam arbitrárias, sendo calculadas incrementalmente como parte da simulação. As trajetórias são representadas em uma região localizada do modelo, que pode ser remodelada automaticamente a cada incremento de trinca por meio de um algoritmo de geração de malha de elementos de casca quadrilaterais. Duas alternativas de modelagem da região em torno da ponta da trinca são apresentadas: por elementos finitos de casca e por elementos sólidos. A metodologia assume que o crescimento da trinca seja caracterizado por quatro fatores de intensidade de tensão que modelam o comportamento de membrana pela teoria da elasticidade bidimensional, em estado plano de tensões, e o comportamento de placa pela na teoria de Kirchhoff. A resposta da estrutura de casca delgada pressurizada é determinada por meio do programa ADINA (Automatic Dynamic Incremental Nonlinear Analysis), que utiliza um procedimento de análise geometricamente não linear para elementos finitos de casca, formulados pela teoria de Reissner-Mindlin. Um estudo mostra que os fatores de Kirchhoff podem ser correlacionados aos fatores de Reissner-Mindlin por meio de expressões semi-empíricas. Fatores tridimensionais médios de intensidade de tensão são definidos e relacionados aos fatores das teorias da elasticidade bidimensional e de Reissner-Mindlin. Um exemplo de aplicação é apresentado, comparando-se os resultados das três teorias. A validação da metodologia é discutida por meio da simulação do crescimento de trincas por fadiga em um painel de teste em escala real da fuselagem de um Boeing 737. / A methodology for modeling fatigue crack growth in pressurized, stiffened, thin shell structures is implemented within a software framework that consists of a fracture simulation code associated with a finite element analysis code. Crack trajetories are allowed to be arbitrary and are computed incrementally as a part of the simulation. Trajectories are represented in a localized model region that can be remeshed automatically at each crack increment using a quadrilateral element surface meshing algorithm. Two alternatives for meshing the near crack tip region are presented: by shell finite elements and by solid finite elements. The methodology assumes that the crack growth is caracterized by four stress intensity factors that model the membrane behavior using two-dimensional plane stress elasticity and the plate behavior using Kirchhoff plate theory. The structural response of the pressurized thin shell is computed by ADINA (Automatic Dynamic Incremental Nonlinear Analysis) code, using a geometrically non-linear shell fiinite element analysis procedure, formulated by Reissner-Mindlin theory. A study shows that for thin shells the Kirchhoff factors can be related to the Reissner-Mindlin factors by mean of semi-empirical expressions. Three-dimensional average stress intensity factors are defined and related to the factors of the two-dimensional elasticity and the Reissner-Mindlin theories. An application example is presented and the results of the three theories are compared. The metodology validation is discussed by mean of a fatigue crack growth simulation in a full-scale pressurized panel test of a Boeing 737.

This thesis presents a new modeling framework and application methodology for the study of aircraft structures. The framework provides a ‘cradle-to-grave’ approach to structural analysis of a component, where structural integrity encompasses all phases of its lifespan. The methodology examines the holistic structural design of aircraft components by integrating fatigue and damage tolerance methodologies. It accomplishes this by marrying the load inputs from a fatigue analysis for new design, into a risk analysis for an existing design. The risk analysis incorporates the variability found from literature, including recorded defects, loadings, and material strength properties. The methodology is verified via formal conceptualization of the structures, which are demonstrated on an actual hydraulic accumulator and an engine nacelle inlet. The hydraulic accumulator is examined for structural integrity utilizing different base materials undergoing variable amplitude loading. Integrity is accomplished through a risk analysis by means of fault tree analysis. The engine nacelle inlet uses the damage tolerance philosophy for a sonic fatigue condition undergoing both constant amplitude loading and a theoretical flight design case. Residual strength changes are examined throughout crack growth, where structural integrity is accomplished through a risk analysis of component strength versus probability of failure. Both methodologies can be applied to nearly any structural application, not necessarily limited to aerospace.

Táto diplomová práca sa zaoberá návrhom kompozitového trupu štvormiestneho jednomotorového turistického letúnu TL-4000, ktorý spadá do kategórie CS-23 zo zameraním sa na zadnú časť. V tejto práci je vypracovaný návrh vnútornej konštrukcie s ohľadom na posádku a pasažierov. Z navrhnutej konštrukcie je vytvorený MKP model po ktorom nasleduje vypracovanie a vyhodnotenie skladby laminátových a sendvičových častí nosnej konštrukcie pomocou softvérov MSC.Patran/Nastran a ComPost pre vypočítané kombinácie vzdušného zaťaženia.

Uma metodologia para simular o crescimento de trincas por fadiga em estruturas pressurizadas de cascas delgadas e enrijecidas é implementada por meio de uma estrutura de software, que consiste em um programa de simulação de fraturamento associado a um programa de análise por elementos finitos. Permite-se que as trajetórias das trincas sejam arbitrárias, sendo calculadas incrementalmente como parte da simulação. As trajetórias são representadas em uma região localizada do modelo, que pode ser remodelada automaticamente a cada incremento de trinca por meio de um algoritmo de geração de malha de elementos de casca quadrilaterais. Duas alternativas de modelagem da região em torno da ponta da trinca são apresentadas: por elementos finitos de casca e por elementos sólidos. A metodologia assume que o crescimento da trinca seja caracterizado por quatro fatores de intensidade de tensão que modelam o comportamento de membrana pela teoria da elasticidade bidimensional, em estado plano de tensões, e o comportamento de placa pela na teoria de Kirchhoff. A resposta da estrutura de casca delgada pressurizada é determinada por meio do programa ADINA (Automatic Dynamic Incremental Nonlinear Analysis), que utiliza um procedimento de análise geometricamente não linear para elementos finitos de casca, formulados pela teoria de Reissner-Mindlin. Um estudo mostra que os fatores de Kirchhoff podem ser correlacionados aos fatores de Reissner-Mindlin por meio de expressões semi-empíricas. Fatores tridimensionais médios de intensidade de tensão são definidos e relacionados aos fatores das teorias da elasticidade bidimensional e de Reissner-Mindlin. Um exemplo de aplicação é apresentado, comparando-se os resultados das três teorias. A validação da metodologia é discutida por meio da simulação do crescimento de trincas por fadiga em um painel de teste em escala real da fuselagem de um Boeing 737. / A methodology for modeling fatigue crack growth in pressurized, stiffened, thin shell structures is implemented within a software framework that consists of a fracture simulation code associated with a finite element analysis code. Crack trajetories are allowed to be arbitrary and are computed incrementally as a part of the simulation. Trajectories are represented in a localized model region that can be remeshed automatically at each crack increment using a quadrilateral element surface meshing algorithm. Two alternatives for meshing the near crack tip region are presented: by shell finite elements and by solid finite elements. The methodology assumes that the crack growth is caracterized by four stress intensity factors that model the membrane behavior using two-dimensional plane stress elasticity and the plate behavior using Kirchhoff plate theory. The structural response of the pressurized thin shell is computed by ADINA (Automatic Dynamic Incremental Nonlinear Analysis) code, using a geometrically non-linear shell fiinite element analysis procedure, formulated by Reissner-Mindlin theory. A study shows that for thin shells the Kirchhoff factors can be related to the Reissner-Mindlin factors by mean of semi-empirical expressions. Three-dimensional average stress intensity factors are defined and related to the factors of the two-dimensional elasticity and the Reissner-Mindlin theories. An application example is presented and the results of the three theories are compared. The metodology validation is discussed by mean of a fatigue crack growth simulation in a full-scale pressurized panel test of a Boeing 737.

The thesis contains determination of real aerodynamics characteristics of PW09-135 flap airfoil with help of calibration method via CFD, followed by accomplishment of CFD analysis of parts and the whole Twin Shark glider. Detailed research and optimization was made to flow field quality of fuselage and wing fuselage junction. On the basis of CFD solution was determine a stability control, static margin and angle of attack of a horizontal stabilizer. The thesis concludes an evaluation of results applicability in praxis.

Master's thesis deals with the damage tolerance analysis of wing-to-fuselage joint of L 410 NG airplane. Thesis includes determination of the load distribution to the individual attachments of wing-to-fuselage joint, residual strength analysis and residual fatigue life analysis of the most loaded attachment lugs, calculation of fatigue crack growth curves in the attachment solids and inspection program proposal. This analysis was performed using FE model of the wing and central part of the fuselage and AFGROW software.

The resolution of the complex physics of rotating configurations is critical for any engineering analysis that requires multiple frames of reference. Two well-known applications are in the rotorcraft and wind energy industries. Rotor wake impingement from rotor-fuselage and wind turbine-tower interactions impact structural and acoustic characteristics. Additionally, parasite drag resulting from rotorcraft hubs may result in severe limitations on forward flight vehicle performance. Complex turbulent wakes from rotors and hubs impinging on downstream empennage can create adverse aeroelastic behavior and can affect handling qualities. Numerical simulations of these flows require state-of-the-art Navier Stokes methods using dynamic overset grids. However, many current methods typically used in industry result in wakes that dissipate essential features. In order to address these concerns, two advancements are introduced in this thesis. Feature-based grid adaptation on dynamic overset grids has been developed and demonstrated with an unstructured Navier Stokes solver. The unique feature of the adaptation technique is that it is applied globally on the overset grid system except within the boundary layer. In concert with grid adaptation, an efficient parallelized search algorithm for solution interpolation over massively distributed systems has been created. This results in cost-effective interpolation that retains the numerical order of accuracy and has been verified in both space and time. The improvements have been demonstrated for rotor-fuselage interaction and a generic rotating hub. Detailed analysis of convergence of the methodology and sensitivity of the results to relevant parameters have also been included.

The current dissertation, titled “Fire Response of Composite aerostructures” deals with a crucial subject of the aeronautics industry that is the fire response of composite aerostructures, more specifically the issue of interest in this work is the fuselage fire burnthrough from an external liquid jet-fuel pool fire. Other fire issues that “bother” the aeronautics industry are the fire spread inside the cabin, smoke generation and toxicity of the fumes, but these are not handled in the current dissertation. Aircraft structures are designed to withstand various loading scenarios during their operational life. These loading scenarios are associated to a great extent with normal aircraft operation (flight manoeuvres, take-off and landing). However there are situations where the aircraft structures are required to assure the safety of the passengers and crew. In the case of an emergency crash landing, the threat of an external jet-fuel fire always exists. Considering that the aircraft structure survives the impact, the survivability of the passengers and crew onboard the aircraft depends solely on the fire resistance of the aircraft structure. A measure of the fire resistance of an aircraft structure is the time needed for the flames to penetrate the fuselage and spread inside the cabin, the so-called, burn-through time. So far, the aircraft fire resistance has been extensively studied by conducting lab, medium and full scale tests. The early lab scale tests were performed by the Federal Aviation Administration (FAA) and involved the Bunsen-burner flammability test of coupons for developing fire safe interior materials. As the application of polymer materials on aircrafts kept increasing, the problem of fire burn-through due to external fire emerged. Marker was one of the first to perform full-scale fuselage burn-through tests to access the insulating performance of materials. Also a statistical analysis was performed by Cherry and Warren that accessed and analyzed data from past accidents and their work resulted in proving the importance of fuselage fire hardening and the passengers’ lives that could be saved using low-cost solutions. These works led the FAA to proposed new fire testing procedures for aircraft materials. The scope of this dissertation was to assess the performance of various structural materials in a pool-fire scenario. A simplified approach is made, approximating the pool-fire conditions with a flat panel burn-through test in accordance to the ISO2685:1998(E) Standard. The originality of the present work comes from the fact that it incorporates a multistage approach in order to investigate the behaviour and response of composite aircraft structures in the possibility of a fire event. The current approach goes down on material level in order to investigate and model the deterioration (decomposition) of the polymer composite. Thus, it investigates and proposes a methodology of how the thermophysical properties of the composite are deteriorated due to the fire event. It proceeds into developing a progressive-damage material model (material properties varying with the deterioration degree) and finally implementing this custom material model into a commercial FE package and solving the loading scenarios. Being more specific the current work begins with a quick review of the literature where incidents and work done on the burnthrough event for the past 20-30 years are summarized. It progresses then to presenting the various types of polymers used in the aircraft industry and their basic decomposition mechanisms, from the unsaturated polyesters to the epoxies and phenolics and in the end reference to the thermoplastics is made. Every organic material, hence, polymers used in aerospace applications, present a set of response characteristics when subjected to fire, specifically the heat release rate, thermal stability index, limiting oxygen index, flammability index, time-to-ignition, surface flame spread, mass loss, smoke density and smoke toxicity. Following is the backbone of this dissertation, the kinetics modelling. Two approaches are made, one simplified using single stage kinetics where the decomposition degree a is calculated based on the Arrhenius reaction theory and using the kinetic triplets (kinetic parameters) extracted from thermogravimetry, TGA, data using the Friedman multi-curve method. The second approach is more complicated and considers multi-stage decomposition of the polymer composite. Specifically a 3-stage reaction network is considered for every material, the LY-Ref, and the two modified batches, one with ammonium polyphosphate AP423 and the other both with AP423 and multi-wall carbon nanotubes MWCNT. Again the kinetic parameters, activation energy EA, frequency factor A, and reaction order n, are extracted for every step using the van Krevelen methodology. In the end using the reaction rates equations the reconstruction of the TGA curves is achieved with an error of less than 5% from the test data. Correlations that consider the material deterioration and affect the thermophysical properties of the materials are proposed. Those expressions are being developed for both of the two kinetic approaches, the single and multi stage. Another crucial part of this work is the measurement and calibration of the applied fire load. Again two fire load approaches are used, one according to the ISO2685 Standard where a propane burner was manufactured and calibrated according to the Standard for medium scale samples testing and a lab scale butane burner for small samples. The ISO2685 burner was also CFD simulated and the models calibrated against analytical expressions, ISO requirements and real measurements. The CFD simulations were performed so the heat flux or heat transfer coefficient to be extracted and used as input for the later thermal FE burnthrough models. The heat flux distribution of the lab-scale AML burner on the specimen surface was measured via a water cooled Schmit-Boelter SBG01 heat flux sensor manufactured by Hukseflux. Manufacturing and material details are presented concerning the samples used for every test campaign. Metallic (AL2024-T3) samples, CFRP neat and modified, and hybrid GLARE ones where manufactured. Also the experimental work performed is described. Cone calorimetry testing data are available, results from thermogravimetry tests, differential scanning calorimetry, and finally the burnthrough tests with both the testing apparatuses, the ISO2685 one and the AML lab-scale burner. The modelling work in this dissertation involved thermal models that were developed into a commercial FE package. It was not part of this work to develop a thermal solver so a commercial one was selected and all the developed methodology was adapted to its requirements and specifications. The boundary conditions on the models are presented both for the ‘hot’ front surface and the rear ‘cooling’ one. For the ‘hot’ one the heat flux distribution is used and for the ‘cooling’ one an equivalent convection is applied that accounts for both convective and radiative cooling. The decomposing material model is implemented into to FE solver via user defined subroutines for the single stage kinetics and the multi-stage approach. Finally the simulations were run and the results and models were compared against the available experimental results. Since so far the burnthrough response of aerostructures was limited to coupon, samples and medium size flat panels. A more realistic approach was performed by developing a mathematical model of a real size test. The certification tests conducted by the FAA are for full size fuselage sectors under the fire load of a burning jet-fuel pan pool-fire. A burning jet-fuel pool fire is a complex phenomenon on its own, combining it with a decomposing fuselage structure make the modeling approach even more difficult to simulate if not impossible. Required data for the pool-sizes under investigation were not available, so data for large external hydrocarbon pool fires from literature were used. Also, because the main characteristic of a jet-fuel (kerosene) pool fire is that the flames are not clear, on the contrary, great amount of shoot is produced making combustion modeling and radiative heat transfer to the fuselage even more of a challenge to model, it was decided to try and tackle this full-scale approach by a simplified the modeling approach. Instead of liquid fuel combustion, an equal hot air stream with mass flow, velocity and temperature properties extracted from literature correlation data was performed. Conclusively, in terms of completeness the benefit analysis performed by Cherry and Warren is presented in brief. The objective of their analysis was to assess the potential benefits, in terms of reduction of fatalities and injuries, resulting from improvements in fuselage burnthrough resistance to ground pool fires. Fire hardening of fuselages will provide benefits in terms of enhanced occupant survival and may be found to be cost beneficial if low-cost solutions can be found. The maximum number of lives saved per year in worldwide transport aircraft accidents, over the period covered by the data, if hardening measures were applied, was assessed to be 12.5 for the aircraft in its actual configuration (when the accidents occurred) and 10.5 for the aircraft configured to later airworthiness requirements. These figures are completely significant and give an extra confirmation that this work on investigating the fire response of composite aerostructures is on the right track. As the work of Cherry and Warren concluded, the fire hardening measures in order to be applicable need to be cost efficient. The concept under which this whole dissertation stepped on was to investigate the fire response of composite aerostructures and the possibility of hardening the structure itself without the use of extra protective layers that add cost and weight to the overall aircraft and its maintenance. In the end it was concluded that there is the possibility of hardening the fuselage structure by design and by material. Incorporating composites into the structure it is possible to prolong the burnthrough time at least for 4-5 minutes before auto ignition occurs on the inner side of the fuselage. Auto ignition of the inner side fuselage cabin materials is mentioned since in NONE of the burnthrough tests of the CFRP composites and the GLARE samples flame penetration was observed. / Στην παρούσα διατριβή με τίτλο «Ανάλυση της απόκρισης σύνθετων πολυμερών υλικών υπό συνθήκες φωτιάς. Εφαρμογή σε αεροπορικές κατασκευές» πραγματοποιείται εργασία στην αριθμητική προσομοίωση και πειραματική διερεύνηση της συμπεριφοράς αεροπορικών κατασκευών σε συνθήκες φωτιάς. Στην μέχρι τώρα βιβλιογραφία οι διάφοροι έλεγχοι για πιστοποίηση των αεροπορικών υλικών αλλά και των αεροσκαφών στο σύνολό τους αποτελούνταν από εκτενείς πειραματικές δοκιμές σε μεσαία κλίμακα καθώς και σε πλήρους κλίμακας κατασκευές. Οι προδιαγραφές των ελέγχων ορίζονται από την Ομοσπονδιακή Διεύθυνση Αεροπλοΐας των Ηνωμένων Πολιτειών της Αμερικής, Federal Aviation Administration FAA. Όπως γίνεται αντιληπτό πλήρους κλίμακας δοκιμές είναι χρονοβόρες αλλά και οικονομικά ασύμφορες, για τον λόγο αυτό τα τελευταία χρόνια πραγματοποιούνται προσπάθειες από την FAA για καθιέρωση Προτύπων ελέγχου μικρής κλίμακας τα οποία σε συνδυασμό με αριθμητικά μοντέλα θα είναι σε θέση να προβλέπουν την συμπεριφορά των αεροπορικών κατασκευών σε συνθήκες φωτιάς από την φάση του σχεδιασμού τους. Θα εξασφαλίζεται έτσι καλύτερη διαχείριση οικονομικών και υλικών πόρων. Στην βιβλιογραφία ο μεγαλύτερος όγκος αριθμητικής μοντελοποίησης έχει πραγματοποιηθεί στους τομείς της ναυπηγικής και των θαλάσσιων κατασκευών καθώς επίσης και τα τελευταία χρόνια στον τομέα της αστικής δόμησης. Αριθμητική δουλεία πάνω στην συμπεριφορά των αεροπορικών κατασκευών είναι υπερβολικά περιορισμένη και εκεί στοχεύει να συμβάλει η παρούσα διατριβή. Οι αεροπορικές κατασκευές εκτός των περιορισμών και προδιαγραφών που θέτουν οι άλλες εφαρμογές απαιτούν την ελαχιστοποίηση του προστιθέμενου βάρους στην κατασκευή. Διάφοροι τύποι πολυμερών συνθέτων υλικών χρησιμοποιούνται στην βιομηχανία, διακρινόμενα σε θερμοσκληρυνόμενα και θερμοπλαστικά. Αρχικά παρουσιάζονται τα θερμοσκληρυνόμενα ξεκινώντας από τους ευρέως χρησιμοποιούμενους πολυεστέρες και βινυλεστέρες, στις φαινολικές και εποξικές ρητίνες καταλήγοντας στους υψηλής θερμοκρασίας κυανεστέρες. Εν συνεχεία γίνεται αναφορά στα συνήθη χρησιμοποιούμενα θερμοπλαστικά, πολυπροπυλένιο PP, Poly-ether ether-ketone PEEK και polyphenylene Sulphide PPS. Φυσικά δεν παραλείπεται να γίνει σύντομη αναφορά και στις τυπικές διεργασίες θερμικής αποσύνθεσης των προαναφερθέντων πολυμερών. Η συμπεριφορά των σύνθετων πολυμερών υλικών σε συνθήκες φωτιάς περιγράφεται από κάποια χαρακτηριστικά μεγέθη τα οποία χρησιμοποιούνται για την ποιοτική και ποσοτική σύγκριση των διαφόρων υποψήφιων αεροπορικών υλικών. Συγκεκριμένα τα μεγέθη αυτά είναι: Heat Release Rate HRR, Thermal Stability Index TSI, Limited Oxygen Index LOI, Extinction Flammability Index ESI, Time-to-Ignition, Surface Flame Spread, Mass Loss, Smoke Density, Smoke Toxicity. Οι διαδικασίες ελέγχου και τα υπολογιζόμενα μεγέθη γίνονται βάσει διεθνών Προτύπων που κυρίως για τον τομέα της αεροναυπηγικής ορίζονται από την Ομοσπονδιακή Διεύθυνση Αεροπλοΐας FAA. Η αριθμητική προσομοίωση προυποθέτει γνώση της συμπεριφοράς των πολυμερών υλικών σε συνθήκες υψηλής θερμοκρασίας, για τον σκοπό αυτό πραγματοποιήθηκαν πειράματα απώλειας μάζας με χρήση θερμογραβιμετρίας TGA κατά την διάρκεια της οποίας η απώλεια μάζας καθώς και ο ρυθμός αυτής παρακολουθούνται και καταγράφονται σαν συνάρτηση του ρυθμού θέρμανσης. Μέσα από αυτά τα δεδομένα μπορεί να πραγματοποιηθεί εκτίμηση του τρόπου αποσύνθεσης του πολυμερούς. Αρχικά πραγματοποιήθηκε η θεώρηση της μονοβάθμιας αντίδρασης (single-stage reaction) που αποτελεί και την πλέον απλουστευμένη προσέγγιση. Στην θεώρηση αυτή θεωρείται πως η πολυμερής μήτρα περνάει από την «παρθένα» κατάσταση στην απανθρακομένη μέσα σε ένα βήμα. Η περιγραφή της αντίδρασης αυτής γίνεται με μια μονοβάθμια αντίδραση τύπου Arrhenius. Σε δεύτερο βήμα χρησιμοποιήθηκε κινητική θεωρία πολλαπλών σταδίων (multi-stage kinetics) σύμφωνα με την οποία πραγματοποιήθηκε ακριβέστερη προσέγγιση της απόσύνθεσης της πολυμερούς μήτρας των συνθέτων υλικών με απόκλιση μικρότερη του 5% από τα πειραματικά δεδομένα της θερμογραβιμετρείας (thermogravimetry). Και στις δύο προσεγγίσεις της αποσύνθεσης υπολογίσθηκαν οι κινηματικές παράμετροι: συντελεστής συχνότητας A (frequency factor), ενέργεια ενεργοποίησης ΕΑ (activation energy), τάξη αντίδρασης n (reaction order) για κάθε στάδιο. Με την ολοκλήρωση αυτού του σταδίου υπήρχε μια αξιόπιστη δυνατότητα αναπαράστασης της διαδικασίας αποσύνθεσης στο πείραμα της θερμογραβιμετρίας. Είναι γνωστό ότι οι διακυμάνσεις της θερμοκρασίας επηρεάζουν της τιμές των θερμοφυσικών ιδιοτήτων των υλικών. Αναλογιζόμενοι ότι στην διαρκεία της επιβολής της φλόγας στα σύνθετα υλικά όχι μόνο η θερμοκρασία αλλά και η σύσταση μεταβάλλεται συνεχώς λόγω της αποσύνθεσης κρίθηκε αναγκαία η ανάπτυξη μιας μεθοδολογίας που θα συμπεριλαμβάνει την επίδραση της αποσύνθεσης στην μεταβολή των θερμοφυσικικών ιδιοτήτων (θερμική αγωγιμότητα, ειδική θερμοχωρητικότητα και πυκνότητα) της πολυμερούς μήτρας και κατά συνέπεια του συνθέτου υλικού. Οι εξαγόμενες μαθηματικές σχέσεις χρησιμοποιήθηκαν στην αριθμητική προσομοίωση που ακολούθησε. Με σκοπό την ορθή αριθμητική μοντελοποίηση κρίνεται αναγκαία η μέτρηση και βαθμονόμηση του θερμικού φορτίου τον πειραματικών δοκιμών. Το μετρούμενο θερμικό φορτίου χρησιμοποιήθηκε εν συνεχεία ως φόρτιση στα αναπτυχθέντα μοντέλα. Χρησιμοποιήθηκαν δύο πειραματικές διατάξεις εφαρμογής φλόγας, μία μεσαίας κλίμακας σύμφωνα με τις διατάξεις του FAA Standard, που περιγράφεται στο ISO2685:1998(E) “Aircraft – Environmental test procedure for airborne equipment – Resistance to fire in designated fire zones” και μίας εργαστηριακής κλίμακος. Πραγματοποιήθηκε μέτρηση με θερμοζεύγη και καλορίμετρο νερού καθώς και αριθμητική μοντελοποίηση με χρήση CFD για την πρώτη διάταξη. Ενώ για την εργαστηριακής κλίμακας έγινε μέτρηση με θερμοζεύγη και ενός αισθητήρα θερμικού φορτίου «water-cooled Hukseflux Schmit-Boelter SBG01 sensor». Εν συνεχεία πραγματοποιήθηκε η κατασκευή των δοκιμίων των υποψήφιων υλικών καθώς και οι πειραματικές δοκιμές και έλεγχοι τους. Συγκεκριμένα πραγματοποιήθηκε: Θερμιδομετρία κώνου (cone calorimetry), Θερμογραβιμετρία (thermogravimetry), Θερμιδομετρία Διαφορικής Ανίχνευσης (Differencial Scanning Calorimetry, DSC), Μέτρηση Θερμικής αγωγιμώτητας, Δοκιμή διείσδυσης φλόγας (Fire burnthrough penetration). Καθώς ο χαρακτηρισμός της αποσύνθεσης των πολυμερών υλικών, η μεταβολή των θερμοφυσικών ιδιοτήτων, η μέτρηση και βαθμονόμηση του επιβαλλόμενου θερμικού φορτίου καθώς και οι πειραματικές δοκιμές έχουν ολοκληρωθεί ακολουθεί η αριθμητική προσομοίωση. Οι συνοριακές συνθήκες θερμικού φορτίου και ψύξης επιλέχθησαν ως εξής. Ως φόρτιση θεωρήθηκε η κατανομή του θερμικού φορτίου (σε kW/m2) στην εμπρός επιφάνεια του πάνελ. Στην ψύξη της πίσω επιφάνειας λήφθηκε υπόψη τόσο η ελεύθερη μεταφορά θερμότητας με επαφή όσο και η ακτινοβολία. Το μοντέλο της συμπεριφοράς του υλικού διαμορφώθηκε κατάλληλα ώστε να γίνει κατανοητό από τις απαιτήσεις ενός εμπορικού κώδικα Πεπερασμένων Στοιχείων επίλυσης θερμικών προβλημάτων και προσομοιώθηκαν οι πειραματικές δοκιμές διείσδυσης φλόγας των δύο πειραματικών διατάξεων, μεσαίας και εργαστηριακής κλίμακος. Πλέον της αριθμητικής προσομοίωσης της συμπεριφοράς σε φωτιά επίπεδων δοκιμίων αεροπορικών κατασκευών, πραγματοποιήθηκε προσπάθεια απλουστευμένης μοντελοποίησης των συνθηκών φλόγας ενός λιμνάζοντος όγκου καυσίμου αεροσκαφών στο εξωτερικό μιας ατράκτου. Δημιουργήθηκε ένα τρισδιάστατο ρευστομηχανικό μοντέλο πρόβλεψης του θερμικού φορτίου στην επιφάνεια μιας τυπικής ατράκτου σύμφωνα με τις προδιαγραφές γεωμετρίας του Προτύπου “Full-scale test evaluation of Aircraft fuel fire burnthrough resistance improvements” DOT/FAA/AR-98/52,1999. Τα ρευστομηχανικά αποτελέσματα συγκρίθηκαν με δεδομένα βιβλιογραφίας για μεγάλες φλεγόμενες δεξαμενές λιμνάζοντος καυσίμου. Εκτός από την μελέτη της απόκρισης των αεροπορικών κατασκευών σε συνθήκες φλόγας σκοπός της παρούσας εργασίας είναι και η παρουσίαση λύσεων οι οποίες θα έχουν την δυνατότητα της βελτίωσης της συμπεριφοράς των υπαρχουσών δομών καθώς και των μελλοντικών σύνθετων δομών. Ενδεικτικά αναφέρεται η δυνατότητα χρήσης νανοεγκλεισμάτων, και βελτιωμένων μονωτικών υλικών, π.χ. aerogels. Όπως έχει ήδη αναφερθεί οι αεροπορικές κατασκευές θέτουν τον περιορισμό της ελαχιστοποίησης του προστιθέμενου βάρους, για τον λόγο αυτό η ενίσχυση των συνθέτων υλικών θα πρέπει να πραγματοποιηθεί σε επίπεδο υλικού και σχεδιασμού. Πρέπει δηλαδή η ίδια η κατασκευή που είναι ικανή να φέρει τα μηχανικά φορτία να εξασφαλίζει και την πιστοποίηση της FAA για συνθήκες φωτιάς. Συνοψίζοντας, η παρούσα διατριβή πραγματοποιεί μια καινοτόμο, γρήγορη και αρκετά ακριβή προσέγγιση του σημαντικότατου ζητήματος της συμπεριφοράς των πολυμερικών σύνθετων αεροπορικών δομών σε συνθήκες φωτιάς Η πολυπλοκότητα του όλου φαινομένου επέβαλε την πραγματοποίηση παραδοχών και απλουστεύσεων. Καθώς όμως με την αυξανόμενη χρήση των συνθέτων υλικών στις αεροπορικές κατασκευές, ο τομέας της ασφάλειας σε συνθήκες φλόγας είναι συνεχώς αυξανόμενος και απαιτητικός. Για αυτό οι παραδοχές και θεωρήσεις της παρούσας διατριβής μπορούν να βελτιωθούν με χρήση νέων υπολογιστικών μεθόδων και πειραματικών δεδομένων με στόχο την ακόμα ακριβέστερη πρόβλεψη της συμπεριφοράς τον αεροπορικών δομών σε συνθήκες φλόγας.

This diploma work considers conceptual design of aircraft in accordance in FAR 103 regulation. On the base of statistical dates has been made basic geometrical and aero-dynamical concept of a single occupant aircraft. For conception have been chosen optimal driving force and bases calculations of the load pressure and dimensions are included.

This master’s thesis deal with design of EV-55 Outback airplane with pressurized cabin. In this thesis are given common principles and requirements of regulations on construction pressurized cabin. A necessary fuselage modifications and fuselage construction are included. Also construction and build up of air-conditioning system and emergency oxygen system are included. Some parts of this thesis are about weight and balance, definition of pressurized cabin load, simple stability analysis and basic flight performance calculation. At the end of this master’s thesis a result of weight and flight performances are compared with analogous airplanes by other producers.