The goal of the diploma thesis is to develop application for data acquisition and analysis during the measurement of electrical consumption at mechanical machines. First part of the diploma thesis is providing general summary about the methods of measuring the electrical consumption. Special focus is given on methods of the metering electrical consumption in three-phase distribution network. Furthermore, the data acquisition components are being described. Hardware components and development environment LabVIEW where the program itself was created are detailly described.

This thesis deals with design of software for control and evaluation of climatic and temperature test in accredited testing laboratory CVVOZE. It includes literar research in field of climatic and temperature tests, definition of software requirements and making of application flowchart diagram. The thesis also includes implementation description of proposed control software in terms of the program and also a documentation of the application, which focuses on explanation of all application functions to the user.

The diplom thesis deals with modernization of older drill out machine MTS3000 for measurement of residual stress. To make the device work it is necessary to keep running computer control card and necessary software. Because a producer does not provide any upgrade, it was decided to put the device into operation by creating new software. At first an analysis of drilling method and function of device MTS3000 - Restan was made. Next step was to disassemble and analyze the station of the drilling device. Then the station was put into operation and modified for control via USB device NI USB 6009. Finally a computer program in LabVIEW environment was created to automate the measurement process. Program has two main tasks: one is to control the drilling cycle of the machine. Another one is to acquire data from measuring amplifier station.

The problems of solar cells are described in general in theoretic part of the master’s thesis. In particular there is described structure of solar cells, procedure of production of solar cells, kinds of defects that can occur in solar cells and diagnostic methods of detection of this defects. The solar simulator, electroluminescence method, detection of defects during microplasma shining, LBIV and LBIC method belongs to category of diagnostic methods. The main focusing is on diagnostic method of LBIC (Light Beam Inducted Current). The workplace which exploits this method is used in laboratory in Department of Electrotechnology on University of Technology Brno. This method is very exact and it reveals most of defects in solar cell but the problem is the slow speed of testing. In practical part of the master’s thesis the main solved problem is the proposition and realization of modified workplace of LBIC that would work on more modern level, it means using performer PC for service program and Agilent 34410A the modern measuring device. The speed up of the testing time is the goal of modernization in existing accuracy of finding. The modify workplace is realized and compared with the existing workplace subsequently.

This master thesis deals about the issues of chip cards’ side channels. Side channels are new method in cryptanalysis. Unlike classical cryptanalysis, which looks for weaknesses of mathematical structure of algorithms, side channel’s analysis use weaknesses of physical implementation of these algorithms. First part describes chip cards, their usage a security. There is mentioned the issue of cryptographic algorithms and their implementation on smart cards. There are described well-known side channels and examples of their abuse. Practical part of this thesis is focused on a proposal of a laboratory task, which demonstrates power-based side channel attack on smart card. There is designed laboratory workplace for this task, software for measurement and analysis is implemented in development tool LabVIEW. In the last part is this attack realized, the target of this attack is a standard SIM card.

This Master´s thesis on a topic ,,Meaurement process automatization of deviations and stability of oscilators‘‘ describes methods for measuring the difference of time scales. Using this method, calculates the parameters of the oscillator, which is also describes in this work. Parameters of the oscillator means inning and stability. Describes is the procedure for calculating the uncertainties and their presentation in the final calibration sheet. This Master´s thesis also describes the practical measurement with this method in the Czech metrology institute in Brno. Measurement of the parameters of oscillator by the method of measurement of the difference of time scales is carried out automatically by computer. This Master´s thesis deals with the creation and development of new software and thus the automation of the entire task.

The thesis completes the current programming equipment for experimental measurement of isolated animal heart signals. It adds a block providing the pre-processing of the signals. The signals measured are the elektrogram (EG) and the action potential (AP). The origin of individual signals, the measuring method and the possibilities of noise elimination are dealt with in the theoretical part of the thesis. The practical part describes the pre-processing block securing the noise elimination during the AP. It uses accumulative methods of averaging the corresponding time periods of the AP. Based on the results of measuring the signal to noise ratio, the thesis suggests the most appropriate accumulative methods and their variables. In order for the chosen accumulative methods to work well, it is important to divide the AP process into sectors of corresponding shape (repeats). The connection between the EG and AP processes is used to determine the beginning and end of the sectors. These points are identified by the detection of R and T wave peaks in the EG. To detect the R and T waves, the thesis uses methods based on wavelet transform. The efficiency and accuracy of detection methods is verified by test EG signals with hand-marked R and T wave peaks.

The theoretical part is to outline the possibilities of solar energy conversion, learn about the issues solar cells and describe the history of photovoltaics and photovoltaic energy conversion. Then describe principle of the measurement VA characteristics of photovoltaic cells. This issue is not as easy as it seems at first sight, because the solar cell isn’t a linear component, which is very easy to measure. Analysis of VA characteristic of photovoltaic cells affects parameters such as: light intensity, temperature, serial and parallel resistance, the slope of the light source, and more. The practical part deals with creating a workplace for automatic measurement of VA characteristics of photovoltaic cells in the LabVIEW. Challenge is to create a functional program, which automatically measures the VA characteristics not only in the lighted cells, but also in the shaded cell (diode mode). The program calculates the power and important parameters, such as short-circuit current, open circuit voltage, maximum power, current and voltage at maximum power article. The program allows you to export the measured values to a text file. In the last chapter of this work is made control measurements of three samples of monocrystal photovoltaic cell by the measuring workplace. The measurement is compared with the reference device Solar Cell Tester.

The master's thesis summarizes the theory of flow measurement by differential pressure sensors, especially by Normalized Orifice, and summarizes theory concerning Averaging Pitot Tube. It is briefly described LabVIEW programming environment and flow measuring track for which the software was developed. The thesis describes creation of concept of program and in particular its final realization. The program provide observing actual events on measuring track, saving data to file, detail analysis of stored data and creation of measurement report. The main objective is to determine the Averaging Pitot Tube coefficient.

This master's thesis deals with the ways of cell viability determination and its measuring. The first part of this thesis has a brief introduction into the theory of cell viability, also the methods of cell viability measurement and different types of fluorescent probes are described. The thesis further includes a brief description of the image processing methods, as well as the fluorescent microscope and applied filters are described. In the practical part the system implemented at a graphical programming environment LabVIEW used for the cell viability evaluation is described, functions of applied units are explained. The program is checked on model data.