Steel pipelines are widely used in offshore oil/gas facilities. To achieve economically feasible designs, regulatory codes permit utilization of the pipelines well past their elastic response limit. This requires thorough integrity check of the pipeline subject to large scale yielding (LSY). Engineering criticality assessments (ECA) are used to justify the integrity of a cracked pipeline against fracture failure. The currently used ECA crack driving force equation was developed for load-controlled components subject to very limited crack-tip plasticity. Moreover, fracture toughness data are extracted from deeply-cracked laboratory specimens that produce the lowest margin of toughness values. Therefore, the current framework can be overly conservative (or include non-uniform inaccuracies) for ECA of modern pipelines that undergo LSY and ductile crack growth prior to failure. The two main goals of this thesis are: (i) Development of an alternative crack driving force estimation scheme, (ii) Justification of the use of use of shallow-cracked single edge notch tensile (SENT) specimens for the ECA. Strain concentration in concrete coated pipelines, and effect of Lüders plateau on the fracture response are also investigated. A new reference strain J-estimation scheme is proposed and calibrated to 300 nonlinear parametric FE models, which takes advantage of the linear evolution of the J with LSY bending strains. The scheme is hence strain-based and needless of limit load solutions, providing additional accuracy and robustness. The near-tip stress and strain fields of cracked pipelines were also investigated and compared to those obtained from a K-T type formulation. It is shown that the J-Q constraint theory can satisfactorily characterize these fields up to extreme plastic bending levels. Similar J-Q trajectories were also observed in the SENT and pipeline models. Subsequently, FE models utilizing a voided plasticity material were used to parametrically investigate ductile crack growth and subsequent failure of pipelines subject to a biaxial stress state. Plastic strain and stress triaxiality fields ahead of the propagating crack, along with R-curves, were compared among SENT and pipeline models. It is concluded that the SENT specimen could be a viable option for ECA of such pipes based on the observed crack tip constraint similarity.

Wireless Sensor Networks (WSNs) have significant potential in many application domains, and are poised for growth in many markets ranging from agriculture and animal welfare to home and office automation. Although sensor network deployments have only begun to appear, the industry still awaits the maturing of this technology to realize its full benefits. The main constraints to large scale commercial adoption of sensor networks are the lack of available network management and control tools for determining the degree of data aggregation prior to transforming it into useful information, localizing the sensors accurately so that timely emergency actions can be taken at exact location, and scheduling data packets so that data are sent based on their priority and fairness. Moreover, due to the limited communication range of sensors, a large geographical area cannot be covered, which limits sensors application domain. Thus, we investigate a scalable and flexible WSN architecture that relies on multi-modal nodes equipped with IEEE 802.15.4 and IEEE 802.11 in order to use a Wi-Fi overlay as a seamless gateway to the Internet through WiMAX networks. We focus on network management approaches such as sensors localization, data scheduling, routing, and data aggregation for the WSN plane of this large scale multimodal network architecture and find that most existing approaches are not scalable, energy efficient, and fault tolerant. Thus, we introduce an efficient approach for each of localization, data scheduling, routing, and data aggregation; and compare the performance of proposed approaches with existing ones in terms of network energy consumptions, localization error, end-to-end data transmission delay and packet delivery ratio. Simulation results, theoretical and statistical analysis show that each of these approaches outperforms the existing approaches. To the best of our knowledge, no integrated network management solution comprising efficient localization, data scheduling, routing, and data aggregation approaches exists in the literature for a large scale WSN. Hence, we e±ciently integrate all network management components so that it can be used as a single network management solution for a large scale WSN, perform experimentations to evaluate the performance of the proposed framework, and validate the results through statistical analysis. Experimental results show that our proposed framework outperforms existing approaches in terms of localization energy consumptions, localization accuracy, network energy consumptions and end-to-end data transmission delay.

No description available.

No description available.

No description available.

No description available.

No description available.

No description available.

As modern integrated-circuit (IC) technology advances, the level of integration increases, and so too does the clock speed of on-chip signals. As a result, signal integrity has become a major issue on which the circuit performance is largely based. Clock jitter is one of the main issues of signal integrity, and it has become one of the most important circuit limitations. / While extensive research is on-going to reduce clock jitter in ICs, researchers have also been actively involved in discovering ways to characterize it through applications of new time measurement units, or TMUs for short. A number of TMUs have been designed with resolutions down to the picosecond range, among which the time-to-voltage converter (TVC) is a very popular family of circuits used for making highly precise and accurate time measurements. These circuits are popular due to their excellent linearity properties and their ease of fabrication. Nonetheless, these circuits suffer from metastability issues, limiting the lower end of their measurement range. / This thesis first reviews the past TMU circuits, and then presents a TVC architecture that solves the metastability problem. In addition, pipelined operation is added to further increase the throughput of the design. The resolution of the TVC is made adjustable such that it can be used as a stand-alone TMU for different types of applications. The proposed TVC is both verified in simulation and experimentally using a custom designed circuit in a standard 0.18 microm CMOS process supplied by TSMC. Finally, a calibration method is included to further improve the linearity of the overall design.

In this thesis, we focused on two problems in mobile application development: contextualization and large-scale testing. We identified the limitations of current contextualization and testing solutions. On one hand, advanced-remote-computing- based mobilization does not provide context awareness to the mobile applications it mobilized, so we presented contextify to provide context awareness to them without rewriting the applications or changing their source code. Evaluation results and user surveys showed that contextify-contextualized applications reduce users' time and effort to complete tasks. On the other hand, current mobile application testing solutions cannot conduct tests at the UI level and in a large-scale manner simultaneously, so we presented and implemented automated cloud computing (ACT) to achieve this goal. Evaluation results showed that ACT can support a large number of users and it is stable, cost-efficiency as well as time-efficiency.