Spelling suggestions: "subject:"leachate collection systems"" "subject:"ieachate collection systems""
1 |
MODELLING MSW LEACHATE CHARACTERISTICS AND CLOGGINGYu, Yan 26 April 2012 (has links)
A numerical model (BioClog) is developed to examine changes in key municipal solid waste (MSW) leachate characteristics and the porosity of porous media (clogging) as the leachate passes through the drainage layer of a leachate collection system (LCS). The model considers multiple-species reactive leachate transport through porous media. It simulates biofilm growth and loss, deposition of suspended particles, and precipitation of minerals on the surface of porous media. It is used to examine the long-term performance of both the granular porous media and nonwoven geotextiles in LCSs. Modelling of laboratory mesocosm cells filled with gravel usually used in landfills and permeated by landfill leachate shows encouraging agreement between the observed and measured effluent chemical oxygen demand (COD) and calcium concentrations as well as the gravel porosity within the saturated drainage layers. Studies of early generation LCSs involving finger (French) drain systems show that the finger drains are not effective at controlling leachate mounding within the landfill and the calculated leachate mound thicknesses agree well with observed field data. A numerical examination of the recent generation of LCSs, comprised of the granular drainage blanket and perforated drainage pipes, shows that an increase in grain size increases the service life and that increasing the spacing between collection pipes (i.e., the drainage path) decreases the service life of LCSs. Filter-separator layers between the waste and granular drainage layers are shown to increase the service life of LCSs. The modelling results indicate that the calculated clog mass within the saturated drainage layer is dominated by the inorganic material and the calculated service life of LCSs is dependent on the leachate strength examined. Finally, a new practical model for estimating the service life of LCSs is developed and calibrated against the data from the BioClog model. The simplified model could be used by the practicing engineers for estimating the service life and optimizing the design of LCSs in MSW landfills. / Thesis (Ph.D, Civil Engineering) -- Queen's University, 2012-04-26 14:03:22.666
|
2 |
Clogging of drainage material in leachate collection systemsNandela, V. K. Reddy January 1992 (has links)
No description available.
|
3 |
Relationship of waste characteristics to the formation of mineral deposits in leachate collection systemsCardoso, Antonio J 01 June 2005 (has links)
Landfill leachate is generated as a result of reactions between water percolating through the landfill and wastes. Under normal conditions leachate is found at the bottom of landfills and from there, its movement can be controlled with collection systems to be treated, discharged, or recirculated. Landfill leachate collection systems are positioned above the liner and are designed to collect liquid under gravitational flow for the entire active, closure, and post-closure periods. Clogging of any portion of the system can lead to higher hydraulic heads and increase the potential for leakage through the liner. To reduce the quantity of municipal solid wastes (MSW) requiring landfilling, many municipalities have adopted waste-to-energy (WTE) facilities that yield energy in the form of combustible gases and noncombustible residues.
Disposal practices for WTE residuals include landfilling in monofills or co-disposal with MSW and other materials such as residues from water and wastewater treatment facilities. There has been concern about co-disposal practices, because the impacts on leachate quality and waste interactions are not well known yet. This research was conducted to evaluate clogging of leachate collection systems due to co-disposal of MSW and combustion residues from WTE facilities. The use of laboratory lysimeters in conjunction with batch tests to predict short-term and long-term leaching characteristics of noncombustible residues from WTE facilities was also evaluated. Laboratory lysimeters were used to simulate monofills (WTE residues and MSW) and co-disposal practices. Relationships between waste composition and leachate quality were evaluated over a seven month period.
|
Page generated in 0.1035 seconds