<p>Boundary-layer flow over bodies such as aircraft wings or turbine blades is characterized by a pressure gradient due to the curved surface of the body. The boundary layer may experience modal and non-modal instability, and the type of dominant instability depends on whether the body is swept with respect to the oncoming flow or not. The growth of these disturbances causes transition of the boundary-layer flow to turbulence. Provided that they are convective in nature, the instabilities will only arise and persist if the boundary layer is continuously exposed to a perturbation environment. This may for example consist of turbulent fluctuations or sound waves in the free stream or of non-uniformities on the surface of the body. In engineering, it is of relevance to understand how susceptive to such perturbations the boundary layer is, and this issue is subject of <em>receptivity analysis</em>.</p><p> </p><p>In this thesis, receptivity of simplified prototypes for flow past a wing is studied. In particular, the three-dimensional swept-plate boundary layer and the boundary layer forming on a flat plate with elliptic leading edge are considered. The response of the boundary layer to vortical free-stream disturbances and surface roughness is analyzed, receptivity mechanisms are identified and their efficiency is quantified.</p> / 76218 VR Receptivity

Boundary-layer flow over bodies such as aircraft wings or turbine blades is characterized by a pressure gradient due to the curved surface of the body. The boundary layer may experience modal and non-modal instability, and the type of dominant instability depends on whether the body is swept with respect to the oncoming flow or not. The growth of these disturbances causes transition of the boundary-layer flow to turbulence. Provided that they are convective in nature, the instabilities will only arise and persist if the boundary layer is continuously exposed to a perturbation environment. This may for example consist of turbulent fluctuations or sound waves in the free stream or of non-uniformities on the surface of the body. In engineering, it is of relevance to understand how susceptive to such perturbations the boundary layer is, and this issue is subject of receptivity analysis.   In this thesis, receptivity of simplified prototypes for flow past a wing is studied. In particular, the three-dimensional swept-plate boundary layer and the boundary layer forming on a flat plate with elliptic leading edge are considered. The response of the boundary layer to vortical free-stream disturbances and surface roughness is analyzed, receptivity mechanisms are identified and their efficiency is quantified. / QC 20101022 / 76218 VR Receptivity

Direct numerical simulations of the receptivity and instability of boundary layers on flat and curved surfaces are herein reported. Various flow models are considered with the aim to capture aspects of flows over straight and swept wings such as wall curvature, pressure variations, leading-edge effects, streamline curvature and crossflow. The first model problem presented, the flow over a swept flat plate, features a crossflow inside the boundary layer. The layer is unstable to steady and traveling crossflow vortices which are nearly aligned with the free stream. Wall roughness and free-stream vortical modes efficiently excite these crossflow modes, and the associated receptivity mechanisms are linear in an environment of low-amplitude perturbations. Receptivity coefficients for roughness elements with various length scales and for free-stream vortical modes with different wavenumbers and frequencies are reported. Key to the receptivity to free-stream vorticity is the upstream excitation of streamwise streaks evolving into crossflow modes. This mechanism is also active in the presence of free-stream turbulence. The second flow model is that of a Görtler boundary layer. This flow type forms on surfaces with concave curvature, e.g. the lower side of a turbine blade. The dominant instability, driven by a vertically varying centrifugal force, appears as pairs of steady, streamwise counter-rotating vortical rolls and streamwise streaks. The Görtler boundary layer is in particular receptive to free-stream vortical modes with zero and low frequencies. The associated mechanism builds on the excitation of upstream disturbance streaks from which the Görtler modes emerge, similar to the mechanism in swept-plate flows. The receptivity to free-stream vorticity can both be linear and nonlinear. In the presence of free-stream turbulence, nonlinear receptivity is more likely to trigger steady Görtler vortices than linear receptivity unless the frequencies of the free-stream fluctuations are very low. The third set of simulations considers the boundary layer on a flat plate with an elliptic leading edge. This study aims to identify the effect of the leading edge on the boundary-layer receptivity to impinging free-stream vortical modes. Three types of modes with streamwise, vertical and spanwise vorticity are considered. The two former types trigger streamwise disturbance streaks while the latter type excites Tollmien-Schlichting wave packets in the shear layer. Simulations with two leading edges of different bluntness demonstrate that the leading-edge shape hardly influences the receptivity to streamwise vortices, whereas it significantly enhances the receptivity to vertical and spanwise vortices. It is shown that the receptivity mechanism to vertical free-stream vorticity involves vortex stretching and tilting - physical processes which are clearly enhanced by blunt leading edges. The last flow configuration studied models an infinite wing at 45 degrees sweep. This model is the least idealized with respect to applications in aerospace engineering. The set-up mimics the wind-tunnel experiments carried out by Saric and coworkers at the Arizona State University in the 1990s. The numerical method is verified by simulating the excitation of steady crossflow vortices through micron-sized roughness as realized in the experiments. Moreover, the receptivity to free-stream vortical disturbances is investigated and it is shown that the boundary layer is most receptive, if the free-stream modes are closely aligned with the most unstable crossflow mode / QC 20101025