In this work, a low-complexity two-dimensional (2D) frequency-scanned antenna is proposed to image a human using a Doppler radar. It consists of two back-to-back, air-filled microstrip leaky wave antennas (LWAs). The frequency-scanned pattern of the microstrip LWA is used to determine the target bearing in one dimension. Two such elements are used as an interferometer to determine the target bearing in the other dimension. In order to pack two LWAs closely, a design is proposed to achieve a minimal disturbance on the azimuth and elevation beam patterns. The design is measured with both static and Doppler targets to demonstrate the capability to form 2D frontal images. To investigate the potential performance of using the proposed antenna to image a human, a simulator that includes a dynamic human signature model and the frequency-scanned antenna pattern is developed. A radar waveform that is different from that used for the measurement conducted with simple Doppler targets is proposed. A simple five-point human model is tested first to understand the capability of the antenna to image a human. Next, the antenna design and the radar processing parameters are studied to improve the image quality. Simulated frontal images of a walking human are generated and discussed. With a redesigned antenna and new radar processing steps, simulation shows that frontal imagery of a human undergoing motion can be generated. / text

Leaky-waves have been a topic of increasing interest in the last years, with diverse practical applications in many different engineering fields. From periodic, FSS, EBG or even metamaterial leaky-wave based antennas to waveguide filters and higher efficiency energy guiding, they all share a common base structure: a travelling-wave propagating within a metal encapsulation, that can be open or closed, and altered by a planar metallization of periodic nature, from which the energy may radiate. Due to the fact that these antennas are usually electrically large and the periodic printed circuit requires a certain grade of complexity, 3D commercial software is prohibitively time consuming. Also, the homebrew methods developed up to this day are either not rigorous and accurate enough or unable to deal with complex periodic geometries. At this point, the evolution of leaky-wave antennas needs a solid, efficient and versatile tool where to base the future design research on. In this work a novel simulation tool for waveguide embedded leaky-wave antennas is presented. It is based on a full-wave Method of Moments applied to the spectral domain Green Functions for a rigorous modal analysis of the finite structure. The use of Subdomain basis functions allows the software to model complex periodic geometries, overcoming a main limitation, and the analytical nature of the method combined with its 2.5D approach, results in a significant computing time reduction. It is built on a modular coding philosophy and provided with a user-friendly graphical interface, and an intuitive working procedure, making the program not only fast and accurate, but also easy to use and extend to new geometries. Finally, it is remarkable the educational potential of this new analysis software, since it identifies higher order effects as bandgaps and multi-harmonic radiation from a complete and simple modal approach.

No description available.

La focalisation du champ électromagnétique dans les zones de champ proche et lointain est un sujet de forte actualité pour l'imagerie médicale et la radiométrie des microondes jusqu'aux ondes millimétriques. Dans ce cadre, la théorie des ondes de fuite est un formalisme élégant qui permet de décrire d'une même façon les problèmes radiatifs en champ proche et en champ lointain des microondes aux fréquences optiques. Dans cette thèse, on utilise la polyvalence de la théorie des ondes de fuite pour développer des systèmes rayonnants complexes afin de contrôler les caractéristiques radiatives en champ lointain aux fréquences submillimétriques et pour focaliser la radiation électromagnétique en champ proche aux fréquences millimétriques. Ainsi, l'utilisation de matériaux uniques comme le graphène et les cristaux liquides ont été considérés pour la conception des antennes à ondes de fuite, en obtenant des résultats très intéressants en termes de reconfigurabilité, d'efficience et de directivité. Dans ce contexte, une analyse théorique originale a fourni de nouvelles formules pour l'évaluation des caractéristiques radiatives (c.à.d. la largeur de faisceau, le niveau des lobes secondaires, etc.) des antennes à ondes de fuite. En effet, la largeur du faisceau de ces antennes est, jusqu'à présent, estimée au moyen des formules proposées pour la première fois dans les années '60 par Prof. Arthur A. OLINER. Ces formules ne tiennent en compte ni de la longueur de l'antenne (sauf pour des cas très particuliers), ni du rayonnement longitudinal, elles ne permettent donc pas une évaluation rigoureuse.En complément à la reconfigurabilité en champ lointain, les ondes de fuite offrent aussi la possibilité de focaliser la radiation en champ proche. Dans ce cas, on voit que les ondes de fuite peuvent être utilisées d'une façon efficace pour générer des faisceaux non diffractifs de Bessel à travers des systèmes rayonnants à bande étroite aux ondes millimétriques. De plus, le caractère non diffractif des faisceaux de Bessel peut aussi être utilisé pour générer des impulsions très localisées (comme les solitons en optiques) à travers la superposition continue des faisceaux de Bessel sur une large bande de fréquence. Dans ce cadre, une nouvelle formulation a été développée afin de comprendre les limitations physiques et technologiques concernant la génération des impulsions non diffractives et non dispersives, c.à.d. les X-waves. Les résultats ont montré qu'un type de systèmes rayonnants à large bande, notamment les antennes RLSA (en anglais « Radial Line Slot Array »), semblent très favorables pour la génération des X-waves. / In recent years, microwave, millimeter-wave, and THz applications such as medical and security imaging, wireless power transfer, and near-field focusing, just to mention but a few, have gained much attention in the area of ICT due to their potentially high social impact. On one hand, the need of highly-directive THz sensors with tunable radiating features in the far-field region has recently boosted the research activity in the design of flexible, low-cost and low-profile devices. On the other hand, it is of paramount importance to focus energy in the near-field region, and thus the generation of limited-diffraction waves in the microwave and millimeter-wave regime is a topic of recent increasing interest. In this context, leaky-wave theory is an elegant and extremely useful formalism which allows for describing in a common fashion guiding and radiating phenomena in both the near field and the far field, spanning frequencies from microwaves to optics passing through THz. In this PhD thesis we aim to exploit the intrinsic versatility of the leakywave approach to design advanced radiating systems for controlling the far-field radiating features at THz frequencies and for focusing electromagnetic radiation in the near field at millimeter waves. Specifically, the use of relatively new materials such as graphene and liquid crystals has been considered for the design of leaky-wave based radiators, achieving very promising results in terms of reconfigurability, efficiency, and radiating capabilities. In this context, an original theoretical analysis has provided new general formulas for the evaluation of the radiating features (e.g., half-power beamwidth, sidelobe level, etc.) of leaky-wave antennas. Indeed, the current formulations are based on several simplifying hypotheses which do not allow for an accurate evaluation of the beamwidth in different situations. In addition to the intriguing reconfigurable capabilities offered by leaky waves in far-field applications, interesting focusing capabilities can be obtained in the near field. In particular, it is shown that leaky waves can profitably be used to generate limited-diffraction Bessel beams by means of narrow-band radiators in the microwave range. Also, the use of higherorder leaky-wave modes allows for achieving almost the same performance in the millimeter-wave range, where previous designs were subjected to severe fabrication issues. Even more interestingly, the limited-diffractive character of Bessel beams can also be used to generate limited-diffraction pulses as superpositions of monochromatic Bessel beams over a considerable fractional bandwidth. In this context, a novel theoretical framework has been developed to understand the practical limitations to efficiently generate limited-diffraction, limited-dispersion pulses, such as X-waves, in the microwave/millimeter-wave range. As a result of this investigation, a class of wideband radiators has been thoroughly analyzed, showing promising capabilities for the generation of both zeroth-order and higher-order Xwaves. The latter may pave the way for the first localized transmission of orbital angular momentum in the microwave range.