Die Dissertation bietet eine umfassende Analyse des quasi-stationären und dynamischen Verhaltens des Bezugspegels in den Nullkammerpegelgefäßen hydrostatischer Füllstandsmesssysteme von Siedewasserreaktoren. Die bislang rein phänomenologisch beschriebenen Übergangsprozesse im Pegelgefäß werden experimentell untersucht und in ihrer Wirkung auf das Messsystem bewertet. Da der Bezugsfüllstand und die Temperaturpulsationen sicherheitsrelevante Messgrößen sind, wird ein Beitrag zur Reaktorsicherheit geleistet. Die neuartigen, nichtinvasiven Verfahren zur Messung der Phasenverteilung im Pegelgefäß liefern realistische, unverfälschte Messdaten. Die Validierung von Simulationscodes und die sicherheitstechnische Bewertung von Siedewasserreaktoren werden dadurch verbessert. Das im CFD-Code Ansys CFX 14 entwickelte und experimentell validierte Modell bietet eine wichtige Grundlage für die numerische Simulation des Füllstandsmesssystems in Ergänzung zu Experimenten und zur Einbindung in Systemsimulationen.

The diploma thesis is focused on analysis of noise level of mobile power vehicles in relation to motor operation mode and its evaluation. The thesis core lies within measurement of acoustic pressure levels at four vehicles in different motor operation modes by two audio-noise meters. One meter was places within the cabin, the other outside. The results of the work showed a development in reducing noise at modern power vehicles.

Made available in DSpace on 2016-08-17T14:52:59Z (GMT). No. of bitstreams: 1 Jose Igor Santos de Oliveira.pdf: 3257339 bytes, checksum: 08e579c1308bf514ca6256e089894a3b (MD5) Previous issue date: 2005-09-21 / Coordenação de Aperfeiçoamento de Pessoal de Nível Superior / The level measurement, besides the applications in reservoirs of industrial processes, as in the industries chemical, pharmaceutical, chemical petroleum, of I refine of alumina etc, it is applicable also in reservoirs exposed outdoors, such as dikes, lakes and ponds, dams and other. To measure level in most of the cases has great impact in the people's safety, of the environment, and of the involved process, besides influencing in the quality of the final product. Level in several ways can be measured that space from a simple float to a sophisticated system for time of flight of waves that processes the information that returns after the emission of a sign. System as that can use several types of waves to take the information of the transmission, the most common are microwaves, infrared and the ultrasonic ones. In that work a method is described that is used of the technique of the time of flight with the use of ultrasonic waves in association with the adaptive filtering to determine the location of the levels of the liquids contained in a container of known height. It is made a study of robustness of the method with base in simulations, through the variation of the relationship sign noise and of the sampling tax, in comparison with the results obtained with the use of Hilbert Transform, Fourier Transform and Wavelet Transform, considering the time of processing and the measurement uncertainty. / A medição de nível, além das aplicações em reservatórios de processos industriais, como nas indústrias químicas, farmacêuticas, petroquímicas, de refino de alumina etc., é aplicável também em reservatórios expostos ao ar livre, tais como diques, lagos e lagoas, barragens e outros. Medir nível na maioria dos casos tem grande impacto na segurança das pessoas, do meio ambiente, e do processo envolvido, além de influenciar na qualidade do produto final. Pode-se medir nível de diversas formas que vão desde um simples flutuador até um sofisticado sistema por Tempo de Vôo de ondas que processa a informação que retorna na forma de eco refletido após a emissão de um sinal. Um Sistema como esse pode utilizar diversos tipos de ondas para levar a informação da transmissão, as mais comuns são microondas, infravermelhas e as ultra-sônicas. Nesse trabalho descreve-se um método que se utiliza da técnica do Tempo de Vôo com o uso de ondas ultra-sônicas em associação com a filtragem adaptativa para determinar a localização dos níveis dos líquidos contidos em um recipiente de altura conhecida. É feito um estudo de robustez do método com base em simulações, através da variação da relação sinal ruído e da taxa de amostragem. Compara-se com os resultados obtidos com o uso da Transformada de Hilbert, Transformada de Fourier e da Transformada Wavelets, considerando o tempo de processamento e a incerteza na medição.

The doctoral thesis presents methods for low-level measurements, which are exemplified by the general measurement of air ion concentration. Within the first section, the author progressively identifies certain critical effects influencing the concentration of air ions, and these effects are to be considered in evaluating the uncertainty of the measured concentrations. Thus, the thesis aims to provide a systematic description of the procedures and requirements related to low-level measurements; the proposed description then involves a discussion of the process reliability requirements, namely the factors of repeatability, elimination of errors, and definition and describability of measurement uncertainties. Such methodology facilitates, among other activities, the long-term monitoring of air ion concentration in extreme environments, including caves or spaces characterized by high temperatures and humidity. The use of common methods for determining the air ion mobility spectrum is accompanied by a number of disturbing effects, such as spurious fluctuation in the concentration of air ions in time. The experimental section of the thesis describes the testing of different configurations of the measuring device (a collecting electrode and a polarization capacitor); at this stage, we seek the most advantageous distribution of the electrostatic field in the sensor – a Gerdien tube. The systematic suppression of the influence of spurious fluctuations in air ion concentration during the measurement of saturation characteristics is carried out with the least-squares numerical method (as a supporting element), a hybrid technique to describe and evaluate the experimental model. In the second part of the thesis, the methodology of low-level measurement is complemented with procedures for the measurement of freezing potential. This latter domain, as an overall experimental approach applicable during phase changes of the sample, has hitherto not been sufficiently characterized from the metrological perspective, in an up-to-date manner; several subregions of the said domain remain somewhat obscured and deserve significantly more attention. In the given context, this thesis systematically considers a problem where comparable measurement results produced by multiple authors are not available. The measuring methodology proposed herein was utilized in applied research to facilitate the fabrication of an apparatus for the experimental measurement of freezing potential in pre-defined samples; the obtained results then lead us to conclusions with respect to the evaluation of effects that cause differences in the measured data, and the results can be further compared with those obtained by other researchers investigating the given segment of the problem.

Am 14. Oktober 1999 wurde in Rossendorf die dritte Veranstaltung in einer Serie von Workshops über Meßtechnik für stationäre und transiente Mehrphasenströmungen durchgeführt. Dieses Jahr kann auf auf 11 interessante Vorträge zurückgeblickt werden. Besonders hervorzuheben sind die beiden Hauptvorträge, die von Herrn Professor Hetsroni aus Haifa und Herrn Dr. Sengpiel aus Karlsruhe gehalten wurden. Erneut lag ein wichtiger Schwerpunkt auf Meßverfahren, die räumliche Verteilungen von Phasenanteilen und Geschwindigkeiten sowie die Größe von Partikeln bzw. Blasen der dispersen Phase zugänglich machen. So wurde über einen dreidimensional arbeitenden Röntgentomographen, ein Verfahren zur Messung von Geschwindigkeitsprofilen mit Gittersensoren und eine Methode zur simultanen Messung von Blasengrößen sowie Feldern von Gas- und Flüssigkeitsgeschwindigkeit mit einer optischen Partikelverfolgungstechnik vorgetragen. Daneben wurden interessante Entwicklungen auf dem Gebiet der lokalen Sonden vorgestellt, wie z.B. eine Elektrodiffusionssonde. Neue meßtechnische Ansätze waren ebenfalls vertreten; hervorzuheben ist der Versuch, die Methode der optischen Tomographie für die Untersuchung von Zweiphasenströmungen nutzbar zu machen. Der Tagungsband enthält die folgenden Beiträge: S. John, R. Wilfer, N. Räbiger, Universität Bremen, Messung hydrodynamischer Parameter in Mehrphasenströmungen bei hohen Dispersphasengehalten mit Hilfe der Elektrodiffusionsmeßtechnik E. Krepper, A. Aszodi, Forschungszentrum Rossendorf, Temperatur- und Dampfgehaltsverteilungen bei Sieden in seitlich beheizten Tanks D. Hoppe, Forschungszentrum Rossendorf, Ein akustisches Resonanzverfahren zur Klassifizierung von Füllständen W. Sengpiel, V. Heinzel, M. Simon, Forschungszentrum Karlsruhe, Messungen der Eigenschaften von kontinuierlicher und disperser Phase in Luft-Wasser-Blasenströmungen R. Eschrich, VDI, Die Probestromentnahme zur Bestimmung der dispersen Phase einer Zweiphasenströmung U. Hampel, TU Dresden, Optische Tomographie O. Borchers, C. Busch, G. Eigenberger, Universität Stuttgart, Analyse der Hydrodynamik in Blasenströmungen mit einer Bildverarbeitungsmethode C. Zippe, Forschungszentrum Rossendorf, Beobachtung der Wechselwirkung von Blasen mit Gittersensoren mit einer Hochgeschwindigkeits-Videokamera H.-M. Prasser, Forschungszentrum Rossendorf, Geschwindigkeits- und Durchflußmessung mit Gittersensoren

Eine angemessene Qualität der Elektroenergie ist Grundvoraussetzung für den störungsfreien Betrieb aller angeschlossenen Geräte und Anlagen und spielt in den Verteilungsnetzen moderner Industriegesellschaften wie Deutschland eine zentrale Rolle. Die Elektroenergiequalität (EEQ) wird in Strom- und Spannungsqualität unterteilt. Während die Stromqualität maßgeblich im Verantwortungsbereich der Hersteller von Geräten und Anlagen liegt, sind für die Sicherung einer angemessenen Spannungsqualität im Wesentlichen die Netzbetreiber verantwortlich. Durch die technische Weiterentwicklung bspw. neuer Gerätetechnologien und die zunehmende Integration dezentraler Erzeugungsanlagen wie Photovoltaikanlagen ist zu erwarten, dass die EEQ auch künftig weiter an Bedeutung gewinnt. Die EEQ im Niederspannungsverteilungsnetz ist abhängig von Ort und Zeit und wird durch verschiedene Qualitätskenngrößen beschrieben. Die örtliche und zeitliche Abhängigkeit resultieren aus einer Vielzahl verschiedener Einflussfaktoren, welche sich entweder der elektrischen oder der nicht-elektrischen Umgebung des betrachteten Verteilungsnetzes zuordnen lassen. Die elektrische Umgebung wird durch die Art und Anzahl angeschlossener Verbraucher bzw. Erzeuger (Abnehmer- bzw. Erzeugerstruktur) sowie Struktur und technische Parameter des Verteilungsnetzes (Netzstruktur) bestimmt. Die nicht-elektrische Umgebung umfasst u.a. Einflüsse der klimatischen Umgebung wie bspw. Temperatur oder Globalstrahlung. Ziel dieser Arbeit ist die systematische Identifikation korrelativer Zusammenhänge zwischen den genannten Umgebungseinflüssen und der EEQ sowie deren Quantifizierung auf Basis geeigneter Indizes und Kenngrößen. Die Ergebnisse der Arbeit helfen grundlegende Prinzipien der Ausprägung der Elektroenergiequalität im öffentlichen Verteilungsnetz besser zu verstehen sowie die Verteilungsnetze im Hinblick auf die Elektroenergiequalität zu charakterisieren und zu klassifizieren. Analog zu den Standard-Lastprofilen erfolgt die Definition von Standard-Qualitätsprofilen. / Power quality levels in public low voltage grids are influenced by many factors which can either be assigned to the electrical environment (connected consumers, connected genera-tion, network characteristics) or to the non-electrical environment (e.g. climatic conditions) at the measurement site. Type and amount of connected consumers (consumer topology) are expected to have a very high impact on power quality (PQ) levels. The generation topology is characterized by number and kind of equipment and generating installations like photovoltaic systems which are connected to the LV grid. The electrical parameters of the grid define the network topology. The parameters which are most suitable to describe each of the three topologies and the climatic environment will be identified. Voltage and current quality in public low voltage (LV) grids vary depending on location and time. They are quantified by a set of different parameters which either belong to events (e.g. dips) or to variations (e.g. harmonics). This thesis exclusively addresses continuous parameters describing variations. Continuous phenomena like harmonics are closely linked to an one-day-cycle which implies a more or less periodic behavior of the continuous power quality parameters. Consumer topologies such as office buildings or residential areas differ in their use of equipment. Time series analysis is used to distinguish between different consumer topologies and to identify characteristic weeks. The clustering of one-day time series is applied to identify characteristic days within the weeks of certain topologies. Based on the results, emission profiles for certain current quality parameters of different consumer topologies will be defined. Due to the characteristic harmonic current emission of certain consumer topologies which represents the typical user behaviour a classification system is developed. It is used to automatically classify the emission profiles of harmonic currents for unknown measurements and to estimate a likely consumer topology. A classification measure is introduced in order to identify unusual or false classified emission profiles. The usage behaviour of equipment by customers usually varies over the year. Subsequently, the levels of PQ parameters like harmonics may show seasonal variations which are identified by using newly defined parameters. The introduction of new device technologies on a large scale like the transition from incandescent to LED lamps might result in long-term changes to the levels of PQ parameters (e.g. harmonics). The analysis of the long-term behavior (trend) will be applied in order to quantify global trends (looking on the measurement duration as a whole) and local trends (looking on individual segments of the whole time series).

Die Dissertation bietet eine umfassende Analyse des quasi-stationären und dynamischen Verhaltens des Bezugspegels in den Nullkammerpegelgefäßen hydrostatischer Füllstandsmesssysteme von Siedewasserreaktoren. Die bislang rein phänomenologisch beschriebenen Übergangsprozesse im Pegelgefäß werden experimentell untersucht und in ihrer Wirkung auf das Messsystem bewertet. Da der Bezugsfüllstand und die Temperaturpulsationen sicherheitsrelevante Messgrößen sind, wird ein Beitrag zur Reaktorsicherheit geleistet. Die neuartigen, nichtinvasiven Verfahren zur Messung der Phasenverteilung im Pegelgefäß liefern realistische, unverfälschte Messdaten. Die Validierung von Simulationscodes und die sicherheitstechnische Bewertung von Siedewasserreaktoren werden dadurch verbessert. Das im CFD-Code Ansys CFX 14 entwickelte und experimentell validierte Modell bietet eine wichtige Grundlage für die numerische Simulation des Füllstandsmesssystems in Ergänzung zu Experimenten und zur Einbindung in Systemsimulationen.

Agriculture is becoming more dependent on computerized solutions to make thefarmer’s job easier. The big step that many companies are working towards is fullyautonomous vehicles that work the fields. To that end, the equipment fitted to saidvehicles must also adapt and become autonomous. Making this equipment autonomoustakes many incremental steps, one of which is developing an accurate and reliable tanklevel measurement system. In this thesis, a system for tank level measurement in a seedplanting machine is evaluated. Traditional systems use load cells to measure the weightof the tank however, these types of systems are expensive to build and cumbersome torepair. They also add a lot of weight to the equipment which increases the fuel consump-tion of the tractor. Thus, this thesis investigates the use of radar sensors together witha number of Machine Learning algorithms. Fourteen radar sensors are fitted to a tankat different positions, data is collected, and a preprocessing method is developed. Then,the data is used to test the following Machine Learning algorithms: Bagged RegressionTrees (BG), Random Forest Regression (RF), Boosted Regression Trees (BRT), LinearRegression (LR), Linear Support Vector Machine (L-SVM), Multi-Layer Perceptron Re-gressor (MLPR). The model with the best 5-fold crossvalidation scores was Random For-est, closely followed by Boosted Regression Trees. A robustness test, using 5 previouslyunseen scenarios, revealed that the Boosted Regression Trees model was the most robust.The radar position analysis showed that 6 sensors together with the MLPR model gavethe best RMSE scores.In conclusion, the models performed well on this type of system which shows thatthey might be a competitive alternative to load cell based systems.

This master thesis is dedicated to system of water monitoring for use of alternative source power supply and GSM communication. The thesis carried out research on the possibilities to take measurements on watercourses, also detailed research of photovoltaic panel, available accumulators and their charging and a synopsis of similar systems. Furthermore, the master thesis also captures design and implementation datalogger device type with possibility to send measured data to the website.