Spelling suggestions: "subject:"lewis acid/base"" "subject:"ewis acid/base""
1 |
Aspects on wettability and surface composition of modified woodBryne, Lars-Elof January 2008 (has links)
<p>Wood is often combined with other materials such as thermoplastics, adhesives and coatings. In general, combinations of wood and polymers especially in outdoor exposure have poor long-term durability. This behaviour can be related to an insufficient wood-polymer adhesion due to the low intrinsic compatibility between the wood substance and the polymers used. Another source for woodpolymer de-bonding is the high hygroscopicity of wood and great difference in hygro-thermal properties between the components.</p><p> The basic conceptual idea related to this work is to reduce the hygrosensitivity of wood by applying different wood modification methods, in particular, acetylation, furfurylation and heat treatment. The effects of such chemical modifications of wood, also accompanied with ageing effects, on its adhesion properties with commonly used synthetic polymers are, however, not well understood. In this context, the over-all purpose of this thesis is to achieve a better understanding of wood-polymer adhesion and interfacial forces which also may guide us to tailor the interaction between modified wood and e.g. thermoplastics and adhesives. The main focus of this thesis is therefore to apply contact angle analysis based on the Chang-Qin-Chen (CQC) Lewis acid-base model in order to estimate the work of adhesion (<i>W</i><i>a</i>) between the wood, modified wood and certain polymers. Contact angle measurements on wood samples were performed based on the Wilhelm plate principle. Related to this, an effort was also made to characterize the studied modified wood surfaces according to morphology and chemical composition. The methods that have been used are low vacuum scanning electron microscopy (LV-SEM), X-ray photoelectron spectroscopy (XPS) and time-of-flight secondary ion mass spectrometry (ToF-SIMS). </p><p>Results show that so-called interaction parameters can be successfully estimated for prediction of <i>W</i><i>a</i> between wood and polymers using the applied CQC model. Furthermore, such wetting analysis was successfully related to spectroscopic findings of the chemical composition of the wood samples surface. Ageing effects, i.e. the time after preparation of the wood surface, play a central role for the surface characteristics. In most cases, ageing resulted in a significant decrease of <i>W</i><i>a</i> between wood and water and a moderate decrease between wood and thermoplastics. The surface characteristics of acetylated wood were, however, more stable over time compared to unmodified, furfurylated and heat treated wood. The predicted <i>W</i><i>a</i><sub> </sub>with the adhesives for heat treated and acetylated wood was increased due to ageing. Future work is planned to involve studies in order to relate such predicted adhesion properties with the actual performance of various wood-polymer systems.</p>
|
2 |
Aspects on wettability and surface composition of modified woodBryne, Lars-Elof January 2008 (has links)
Wood is often combined with other materials such as thermoplastics, adhesives and coatings. In general, combinations of wood and polymers especially in outdoor exposure have poor long-term durability. This behaviour can be related to an insufficient wood-polymer adhesion due to the low intrinsic compatibility between the wood substance and the polymers used. Another source for woodpolymer de-bonding is the high hygroscopicity of wood and great difference in hygro-thermal properties between the components. The basic conceptual idea related to this work is to reduce the hygrosensitivity of wood by applying different wood modification methods, in particular, acetylation, furfurylation and heat treatment. The effects of such chemical modifications of wood, also accompanied with ageing effects, on its adhesion properties with commonly used synthetic polymers are, however, not well understood. In this context, the over-all purpose of this thesis is to achieve a better understanding of wood-polymer adhesion and interfacial forces which also may guide us to tailor the interaction between modified wood and e.g. thermoplastics and adhesives. The main focus of this thesis is therefore to apply contact angle analysis based on the Chang-Qin-Chen (CQC) Lewis acid-base model in order to estimate the work of adhesion (Wa) between the wood, modified wood and certain polymers. Contact angle measurements on wood samples were performed based on the Wilhelm plate principle. Related to this, an effort was also made to characterize the studied modified wood surfaces according to morphology and chemical composition. The methods that have been used are low vacuum scanning electron microscopy (LV-SEM), X-ray photoelectron spectroscopy (XPS) and time-of-flight secondary ion mass spectrometry (ToF-SIMS). Results show that so-called interaction parameters can be successfully estimated for prediction of Wa between wood and polymers using the applied CQC model. Furthermore, such wetting analysis was successfully related to spectroscopic findings of the chemical composition of the wood samples surface. Ageing effects, i.e. the time after preparation of the wood surface, play a central role for the surface characteristics. In most cases, ageing resulted in a significant decrease of Wa between wood and water and a moderate decrease between wood and thermoplastics. The surface characteristics of acetylated wood were, however, more stable over time compared to unmodified, furfurylated and heat treated wood. The predicted Wa with the adhesives for heat treated and acetylated wood was increased due to ageing. Future work is planned to involve studies in order to relate such predicted adhesion properties with the actual performance of various wood-polymer systems. / QC 20101108
|
3 |
Synthesis and Characterization of Novel Silicone-Boronic Acid Materials / Silicone-Boronic AcidsZepeda-Velazquez, Laura 06 1900 (has links)
Silicone polymers and network-materials have proven extremely useful in a variety of applications owing to their superb properties when compared to carbon-based polymers. Polysiloxanes containing functional groups other than simple alkyl moieties have allowed for further manipulations of pendant groups along the polymer backbone leading to a greater range of possible chemical transformations, as well as changes in physical/interfacial properties. One aspect of functional polymers that has yet to be explored with respect to primarily silicone-based systems is that of stimuli-responsive materials. In order for this unique application to work, silicones must be functionalized with a group or groups that can influence the polymer’s properties based on that group’s response to specific external stimuli. Boronic acids represent one such group, wherein the most common stimuli used to affect changes in ionization state and solubility are pH and diol-binding. Boronic acids are also capable of forming weak hydrogen-bonded dimers with other boronic acids, and dynamic covalent bonds with Lewis bases. It is proposed that the covalent attachment of boronic acids and their derivatives onto silicones could lead to stimuli-responsive silicone materials.
Herein, the synthesis of silicone-boronic acids and their protected boronic esters is described. The simple two-step method involving boronic acid protection followed by hydrosilylation has led to a variety of molecules differing in molecular weight and three-dimensional geometry through the use of commercially available hydride-functional silicones. Initial results regarding saccharide binding selectivity and the impacts on silicone solubility are provided.
The unique interfacial behaviour of silicone-boronic esters and their propensity to form self-assembled, crosslinked films at an air/water interface are also reported. Using several different diol protecting groups and a variety of aqueous sub-phases, the mechanism for changes in physical properties as well as crosslinking were revealed.
Finally, the production of new thermoplastic silicone elastomers from silicone-boronic esters and amine-containing molecules is discussed. The Lewis acid/Lewis base complexation that occurs between nitrogen and boron can provide enough strength to produce robust, yet recyclable, silicone elastomers without the use of catalyst or solvent. Elastomers can be easily dissolved and reformed through the introduction and removal of a mono-functional Lewis base. The impact of crosslink density, controlled by the quantities and molecular weights of each polymer component used, on physical characteristics is reported. / Thesis / Doctor of Philosophy (PhD)
|
4 |
A new lattice fluid equation of state for associated CO₂ + polymer and CO₂ + ionic liquid systemsHossain, Mohammad Zahid 08 June 2015 (has links)
The phase behavior of CO2 + polymer systems is of interest in polymer synthesis, flue and natural gas processing, polymer foam and nanoparticle processing, and drug delivery. Theoretical and experimental evidence suggests that CO2 is able to interact with electron donating functional groups in polymers to form weak Lewis acid – base or EDA (Electron Donor Acceptor) complexes. These complexes can have a significant effect on the phase behavior of associated CO2 + polymer systems. In spite of this, however, the phase equilibria of only a few associated CO2 + polymer systems have been measured. Some success in modeling the phase behavior of polymer solutions has been achieved by various versions of the Statistical Association Fluid Theory (SAFT), as well as by several Lattice Models. However, many of these models incorporate two to four adjustable parameters that often depend on temperature (T), pressure (P), and/or molecular weight (MW). As a result, a large amount of experimental data is required to apply these models. The goal of the present work was therefore to develop a new thermodynamic model for associating systems that would include no more than two temperature-independent adjustable parameters. The new model presented in this work is based on the Guggenheim-Huggins-Miller lattice and includes complex formation in the development of the partition function.
The EOS obtained from the resulting partition function includes two mixture parameters – the enthalpy of association or complex formation and a reference value of the equilibrium constant for complex formation . Most importantly, can be obtained from in situ Attenuated Total Reflection Fourier Transform Infrared (ATR – FTIR) measurements. This work therefore demonstrates the use of ATR – FTIR spectra to obtain molecular level information regarding the interaction of CO2 and electron donating functional groups in polymers. Unlike other studies, this work uses the bending vibration of CO2 to estimate the enthalpies of association ( ) of CO2 + polymer systems. Values of were directly incorporated in the new model and were found to lie between -7 and -12 kJ/mol for the systems investigated in this work. They increased (i.e. became more negative) in the order: CO2 + PS-co-PMMA < CO2 + PMMA <CO2 + PBMA < CO2 + PSF < CO2 + PVAc < CO2 + EVA40 < CO2 + PEG.
Values of the second parameter in the new EOS ( ) were obtained by fitting solubility data at one temperature. Both and were found to be temperature independent. The application of the new EOS was demonstrated by calculating the solubility (sorption) of CO2 in polymers, the extent of swelling of polymers due to CO2, and the solubility of polymers in CO2 (cloud points). Both sorption and cloud point behavior in CO2 + polymer systems could be calculated using a single value of for each binary system.
Ionic Liquids (ILs) can also incorporate electron donating functional groups in their structure. Evidence for the interaction of such ILs with CO2 can be found in the large values of the enthalpies of absorption of CO2 in these ILs. The ALF EOS was therefore extended to CO2 + IL systems using the enthalpy of absorption as a measure of association ( ) in these systems. was again treated as an adjustable parameter in the calculation of the CO2 solubility in ILs. A single value of was sufficient to predict swelling in these systems within experimental error.
|
5 |
Specific interactions in carbon dioxide + polymer systemsKasturirangan, Anupama 04 January 2008 (has links)
Specific Interactions in Carbon Dioxide + Polymer Systems
Anupama Kasturirangan
163 Pages
Directed by Dr. Amyn S. Teja
Weak complex formation in CO2 + polymer and CO2 + copolymer systems containing C=O and C-F groups was quantified using in situ FTIR spectroscopy. The enthalpy of interaction thus obtained was directly incorporated into a lattice model and compressibility effects were accounted for via ratio of free volumes in modified segment number. CO2 + fluropolymer phase behavior could be correlated within experimental error (AAD of about 2%) using the new model, a task that has been beyond the capability of published models and it was also possible to predict phase equilibria of CO2 + PLGA copolymer systems with a single parameter obtained by fitting cloud point behavior in a reference system (CO2 + PLA in this case).New data on sorption equilibria in several CO2 + PLGA systems were obtained using a quartz crystal microbalance (QCM) and new data on Tg depression in the CO2 + PLA system were also obtained using a high pressure DSC method and used to demonstarte that model parameters are valid over extended pressure ranges. The new compressible lattice model developed is thus able to correlate cloud points, sorption equilibria, glass transition temperatures, and melting points using a single parameter. The model is therefore likely to be beneficial in many applications involving CO2 + polymer systems including drug delivery and encapsulation, polymer coating, and membranes for natural gas separations.
|
6 |
The Direct Detection and Kinetic Studies of Dimethylgermylene and Tetramethyldigermene In Solution By Nanosecond Laser Flash Photolysis / Dimethylgermylene and Tetramethyldigermene In SolutionLollmahomed, Farahnaz Begum 10 1900 (has links)
<p> Dimethylgermylene (GeMe2) has been generated by laser flash photolysis of 1,1dimethyl-3-phenylgermacyclopent-3-ene (23) and 1,1,3-trimethyl-4phenylgermacyclopent-3-ene (24) in hexanes at 25°C and its absorption maximum (λmax) has been unambiguously established to be 470 nm. GeMe2 decays with second-order kinetics under these conditions (2k/ε. = (10 ± 2) x 10^7 cm s^(-1)) to give Ge2Me4 (λmax = 370 nm). Kinetic studies of the reactions of GeMe2 and Ge2Me4 with typical germylene/digermene scavengers such as 1,3-dienes, olefins, alkynes, alkyl halides, group 14 metal hydrides, carboxylic acids, and amines have been carried out. </p>
<p> GeMe2 reacts reversibly with MeOH, t-BuOH and THF to form Lewis acid-base complexes which exhibit relatively strong absorption bands that are blue-shifted with respect to GeMe2 (λmax ~ 295-310 nm). The decay of the Me2Ge-MeOH complex is accelerated in the presence of a Brnnsted acid (acetic acid or methanesulfonic acid) or base (MeONa). The reactions of the Me2Ge-THF complex with sodium methoxide, methanesulfonic acid, 4,4-dimethyl-1-pentene, 2,3-dimethyl-1-butadiene, acetic acid and CC4 have also been studied in THF. </p>
<p> The photochemistry of two well-known precursors to GeMe2, namely dodecamethylcyclohexagermane (14) and dimethylphenyl(trimethylsilyl)germane (18) was reinvestigated. Laser flash photolysis of 14 in hexanes led to the formation of two transients, one with λmax= 490 nm (τ < & = 10 ns) and the second with λmax= 470 nm. The latter decays with second-order kinetics with concomitant formation of a new transient with λmax= 370 nm. The transient at 470 nm is assigned to GeMe2 and that at 370 nm to Ge2Me4, based on comparisons to the results obtained from laser flash photolysis of 23 and 24. Laser flash photolysis of 18-in hexane gives rise to two absorption bands centered at λmax = 300 nm and λmax = 430 nm, which are assigned to the dimethylphenylgerrnyl radical and the conjugated gerrnene derivative 38, respectively. GeMe2 cannot be detected in laser flash photolysis experiments with this compound. </p> / Thesis / Doctor of Philosophy (PhD)
|
7 |
Oxide and Oxide Fluoride Chemistry of Xenon(VIII), Xenon(VI), and IridiumGoettel, James T. January 2017 (has links)
This Thesis extends our fundamental knowledge of high-oxidation-state chemistry and in particular compounds of Xe(VIII), Xe(VI), and Ir(V). The crystal structure of XeVIIIO4 was obtained and provides important information on this fundamentally interesting endothermic and shock-sensitive compound. Macroscopic amounts of XeO3F2 have been prepared for the first time. Although the low-temperature Raman spectrum of solid XeO3F2 exhibits some frequency shifts and band splittings of the bending modes, the spectrum is similar to the Raman spectrum of the previously reported matrix-isolated compound. The crystal structures of decomposition and byproducts resulting from the syntheses of XeO3F2 have been obtained for [XeF5][HF2]∙XeOF4 and XeF2∙XeO2F2.
The solid-state structure of xenon trioxide, XeO3, was reinvestigated by low-temperature single-crystal X-ray diffraction and shown to exhibit polymorphism that is dependent on crystallization conditions. The previously reported α-phase (orthorhombic, P212121) only forms upon evaporation of aqueous HF solutions of XeO3. In contrast, two new phases, β-XeO3 (rhombohedral, R3) and gamma-XeO3 (rhombohedral, R3c) have been obtained by slow evaporation of aqueous solutions of XeO3. The extended structures of all three phases result from Xe=O----Xe bridge interactions among XeO3 molecules that arise from the amphoteric donor-acceptor nature of XeO3. The Xe atom of the trigonal pyramidal XeO3-unit has three Xe---O secondary bonding interactions. The orthorhombic α-phase displays the greatest degree of variation among the contact distances and has a significantly higher density than the rhombohedral phases. The ambient-temperature Raman spectra of solid α- and gamma-XeO3 have also been obtained and assigned for the first time.
Xenon trioxide interacts with CH3CN and CH3CH2CN to form O3XeNCCH3, O3Xe(NCCH3)2, O3XeNCCH2CH3, and O3Xe(NCCH2CH3)2. Their low-temperature single-crystal X-ray structures show that the xenon atoms are consistently coordinated to three electron-donor atoms which result in pseudo-octahedral environments around their xenon atoms. The adduct series provides the first examples of a neutral xenon oxide bound to nitrogen bases. Energy-minimized gas-phase geometries and vibrational frequencies were obtained for the model compounds O3Xe(NCCH3)n (n = 1−3) and O3Xe(NCCH3)n∙[O3Xe(NCCH3)2]2 (n = 1, 2). The natural bond orbital (NBO), quantum theory of atoms in molecules (QTAIM), electron localization function (ELF), and molecular electrostatic potential surface (MEPS) analyses were carried out to further probe the nature of the bonding in these adducts.
Xenon trioxide forms adducts with the polytopic nitrogen base ligands: hexamine, DABCO, 2,2’-bipyridine, 1,10-phenanthroline, and 4,4’-bipyridine. The adducts were conveniently synthesized in aqueous or CH3CN solutions and are stable at room temperature. The crystal structures of hexamine∙2XeO3, hexamine∙XeO3∙H2O, 2,2’-bipyridine∙XeO3, 1,10-phenanthroline∙XeO3, and 4,4’-bipyridine∙XeO3 have been determined by low-temperature single-crystal X-ray diffraction. The structures consist of XeO3 molecules bridged by the ligands to form extended supramolecular networks with Xe---N bonds which range from 2.634(3) to 2.829(2) Å. Raman spectroscopy was used to characterize and probe the room-temperature stabilities of these adducts. The reaction of 1,4-diazabicyclo[2.2.2]octane (DABCO) with XeO3 in aqueous solutions yields thin, plate-shaped crystals which are severely twinned whereas the reaction of DABCO with XeO3 in the presence of HF forms [DABCOH]2[F2(XeO3)2]∙H2O and [DABCOH2][F][H2F3] which were also characterized by low-temperature X-ray crystallography and Raman spectroscopy. A reversible temperature-dependent phase transition occurred for [DABCOH]2[F2(XeO3)2]∙H2O. The structures of 2,2’-bipy∙XeO3 and 1,10-phen∙XeO3 provide the first examples of noble-gas chelates. The structure of hexamine∙XeO3∙H2O provides the first instance in which a noble-gas centre is coordinated by water. These compounds also represent the first examples of sp2- and sp3-hybridized N---Xe(VI) bonds and are rare examples of noble-gas compounds that are air-stable at ambient temperatures.
Adducts between XeO3 and three molar equivalents of the nitrogen bases, pyridine and 4-dimethylaminopyridine (4-DMAP), have been synthesized and characterized. The crystal structures of (C5H5N)3XeO3, {(CH3)2)2NC5H4N}3XeO3∙H2O have been determined by low-temperature single-crystal X-ray diffraction. The reaction of hydrolyzed XeF6 in acetonitrile with pyridine or 4-DMAP afforded [C5H5NH]4[HF2]2[F2(XeO3)2] and [(CH3)2NC5H4NH][HF2]∙XeO3 which were characterized by low-temperature X-ray crystallography and Raman spectroscopy. The structures contain pyridinium cations that are hydrogen bonded to the fluoride coordinated to XeO3 and can be viewed as pyridinium fluoroxenates. The structure of (CH3)2NC5H5N∙XeO3∙H2O contains a water molecule that is hydrogen bonded to two oxygen atoms of two adjacent XeO3 molecules. The pyridine adduct, (C5H5N)3XeO3, was found to be relatively insensitive to shock, whereas the 4-DMAP adduct was extremely shock sensitive.
The number of isolable compounds which contain different noble-gas−element bonds is limited for xenon and even more so for krypton. Examples of Xe−Cl bonds are rare and prior to this work, no definitive evidence for a Xe−Br bonded compound existed. The syntheses, isolation, and characterization of the first compounds to contain Xe−Br bonds ([N(C2H5)4]3[Br3(XeO3)3] and [N(CH3)4]4[Br4(XeO3)4]) and their chlorine analogues are described. The bromo- and chloroxenate salts are stable in the atmosphere at room temperature and were characterized in the solid state by Raman spectroscopy, low-temperature single-crystal X-ray diffraction, and in the gas phase by quantum-chemical calculations. They are the only known examples of cage anions that contain a noble-gas element. The Xe−Br and Xe−Cl bonds are weakly covalent and can be viewed as σ-hole interactions, similar to halogen bonds.
Xenon trioxide reacts with alkali metal fluorides and chlorides to form a variety of room-temperature stable fluoro- and chloroxenate salts. The reaction of XeO3 with various ratios of KF in water afforded three new compounds. The crystal structures of α-K[F(XeO3)2], β-K[F(XeO3)2], α-K[FXeO3], K2[F2(XeO3)] have been determined. The reaction of XeO3 with aqueous CsF resulted in Cs3[F3(XeO3)2]. The XeVI−F bond lengths range from 2.3520(18) to 2.5927(17) Å. No stable product was isolated when [N(CH3)4]F was the fluoride source, but in the presence of HF, crystals of [N(CH3)4]3[HF2]2[H2F3]∙2XeO3 were obtained. The reaction of KCl with XeO3 in equimolar amounts resulted in the formation of K[ClXeO3] whereas the analogous reaction with CsCl yielded Cs3[Cl3(XeO3)4].
Attempts to synthesize Xe–P and Xe–S bonded compounds were unsuccessful and instead resulted in adducts between XeO3 and O-bases such as the phosphine oxide adduct, {(C6H5)3PO}2XeO3 and dimethylsulfoxide (DMSO) adduct {(CH3)2SO}3(XeO3)2. Although DMSO was found to be resistant to oxidation by XeO3, no significant Xe---S bonding interactions were observed. Acetone was found to be highly resistant to oxidation by XeO3 and forms {(CH3)2CO}3XeO3 at low temperatures. The reaction of pyridine-N-oxide yielded large crystals of (C5H5NO)3(XeO3)2 in which the structure contains short chains in contrast with ((CH3)2SO)3(XeO3)2 whose structure consists of discrete dimers. The reaction of XeO3 with the oxidatively resistant main-group oxide anion source, [N(CH3)4][OTeF5] in CH3CN solvent afforded [N(CH3)4][F5TeOXeO3(CH3CN)2].
Xenon trioxide reacts with potassium hydroxide to form the previously known K4[XeO6]∙2XeO3 salt which was characterized by Raman spectroscopy and low-temperature X-ray crystallography. The reaction of MgO with XeO3 yielded single crystals of [Mg(OH2)6]4[XeO6(XeO3)12O2]∙12H2O, which also contains perxenate-XeO3 interactions. Alkali metal carbonates also incorporate XeO3 into their crystal lattices. Raman spectra of M2[CO3(XeO3)n]∙xH2O (M = Na, K, Rb) were recorded and contain intense bands assigned to the XeO3 stretching modes and very weak bands assigned to the [CO3]2− modes. The reaction of dilute aqueous solutions of XeO3 with RbOH and atmospheric CO2 afforded single crystals of Rb2[CO3(XeO3)2]∙2H2O which were characterized by low-temperature X-ray crystallography. Attempts to incorporate XeO3 into other polyatomic anion salts such as KMnO4, NaClO3, and NaNO3 were unsuccessful.
The reaction of IrO2 with XeF6 in aHF provided [Xe2F11][IrF6], whereas the reaction of IrO2 with KrF2 with ClF3 in anhydrous HF solvent provided [ClO2][Ir2F11] and [ClO2][(μ-OIrF4)3]. The structure of [(μ-OIrF4)3]− consists of a six membered Ir3O3 ring with four terminal fluorine atoms on each Ir atom. It was also found that ClF3 forms an adduct with [Xe2F11][HF2] in which the structural parameters of ClF3 are very similar to that of solid ClF3. The [ClO2][Ir2F11] salt provides the first structural information on the [Ir2F11]− anion and the [(μ-OIrF4)3]− anion represents the first isolated iridium oxide fluoride species. / Thesis / Doctor of Philosophy (PhD) / Xenon is a noble-gas element which is located in the far right-hand column of the periodic table and was previously thought to be chemically unreactive and incapable of forming compounds. In 1962, it was shown that xenon reacts with the most reactive compounds, such as elemental fluorine, but the resulting xenon compounds are themselves highly reactive. This Thesis extends the chemistry of some of the most unstable and chemically reactive xenon compounds that are currently known. One such compound, xenon trioxide, tends to easily detonate unless carefully handled. Methods of stabilizing xenon trioxide were developed and its behaviour with compounds which resulted in formation of new xenon compounds was studied. The molecular structures of these compounds were investigated in the solid with particular emphases on their chemical bonding. Iridium is one of the most chemically resistant metals known. Highly reactive xenon and krypton compounds were used synthesize new iridium compounds.
|
8 |
Chromophore Arylboronsäureester und ihr Komplexbildungsverhalten gegenüber Lewis-BasenOehlke, Alexander 14 December 2010 (has links) (PDF)
Die vorliegende Arbeit hat die Synthese und Charakterisierung von chromophoren Arylboronsäureestern mit besonderem Augenmerk auf einer breiten strukturellen Variation zum Inhalt. An dieser Verbindungsklasse wird die Wechselwirkung mit Lewis-Basen tiefgehend untersucht. Die Koordination von Lewis-Basen am Bor-Atom führt zu einer Beeinflussung der elektronischen Eigenschaften des borbasierten Substituenten, wobei der Charakter eines direkt am Bor-Atom gebundenen pi-Elektronensystems von pull zu push-pull geschaltet werden kann. In der vorliegenden Arbeit wird beschrieben, wie geometrische und elektronische Strukturmerkmale von boronsäureesterfunktionalisierten Chromophoren durch die Lewis-Säure-Base-Wechselwirkung am Bor-Atom beeinflusst werden. Die Veränderung von molekularen Eigenschaften wird mit Hilfe der UV/vis-Absorptions- und Fluoreszenzspektroskopie, 1H- und 11B-NMR-Spektroskopie sowie mit röntgendiffraktometrischen Methoden untersucht. Die experimentellen Daten werden durch quantenchemische Berechnungen auf DFT-Niveau unterstützt.
|
9 |
Chromophore Arylboronsäureester und ihr Komplexbildungsverhalten gegenüber Lewis-BasenOehlke, Alexander 28 October 2010 (has links)
Die vorliegende Arbeit hat die Synthese und Charakterisierung von chromophoren Arylboronsäureestern mit besonderem Augenmerk auf einer breiten strukturellen Variation zum Inhalt. An dieser Verbindungsklasse wird die Wechselwirkung mit Lewis-Basen tiefgehend untersucht. Die Koordination von Lewis-Basen am Bor-Atom führt zu einer Beeinflussung der elektronischen Eigenschaften des borbasierten Substituenten, wobei der Charakter eines direkt am Bor-Atom gebundenen pi-Elektronensystems von pull zu push-pull geschaltet werden kann. In der vorliegenden Arbeit wird beschrieben, wie geometrische und elektronische Strukturmerkmale von boronsäureesterfunktionalisierten Chromophoren durch die Lewis-Säure-Base-Wechselwirkung am Bor-Atom beeinflusst werden. Die Veränderung von molekularen Eigenschaften wird mit Hilfe der UV/vis-Absorptions- und Fluoreszenzspektroskopie, 1H- und 11B-NMR-Spektroskopie sowie mit röntgendiffraktometrischen Methoden untersucht. Die experimentellen Daten werden durch quantenchemische Berechnungen auf DFT-Niveau unterstützt.
|
Page generated in 0.0821 seconds