Lifting and overstraining are major causative factors related to musculoskeletal injuries and low back pain. A great number of work-related injuries arise from the handling and/or mishandling of materials. Hence there is a need to quantify risk factors in situ and develop guidelines for safe lifting practises in industry. The aim of this study was to make appropriate in situ quantification, within a commercial warehouse, of the stresses and physical demands imposed on the worker when performing two handed lifts in the sagittal plane. The performance of employees was assessed under normal working conditions through an observational methodology of data collection. Task performance evaluation was based on detailed measurement of all containers handled, an activity and time analysis, and the 'Work Practices Guide to Manual Lifting’ (NIOSH, 1981) which was used as the primary guide to developing theoretical recommendations to probable MMH risk factors for the workers involved. Of the 191 tasks analysed 103 were deemed unsuitable. Appropriate task factor adjustments were made where necessary to both the frequency and Hfactors (horizontal distance between the centre of gravity of the container and that of the worker) in order to reduce the risk factor for the workers

Thesis (MScEng) Stellenbosch University, 2014 / ENGLISH ABSTRACT: This thesis brings together productivity and risk assessments through innovative design, development and evaluation of a unique system for retrieving and analysing data. In the past, although the link between them is well-documented, these assessments have largely been dealt with as separate antagonist entities. A broad evaluation of the existing traditional and technological support systems has been conducted to identify suitable methodologies along with a common technological platform for automation. The methodologies selected for the productivity and risk assessments were; work sampling and the revised NIOSH lifting equation respectively. The automation of these procedures is facilitated through computer vision and the use of a range imaging Kinect™ camera. The standalone C++ application integrates two tracking approaches to extract real-time positional data on the worker and the work-piece. The OpenNI and OpenCV libraries are used to perform skeletal tracking and image recognition respectively. The skeletal tracker returns positional data on specific joints of the worker, while the image recognition component, a SURF implementation, is used to identify and track a specific work-piece within the capture frame. These tracking techniques are computationally expensive. In order to enable real time execution of the program, Nvidia’s CUDA toolkit and threading building blocks have been applied to reduce the processing time. The performance measurement system is a continuous sampling derivative of work sampling. The speed of the worker’s hand movements and proximity to the work-piece are used to classify the worker in one of four possible states; busy, static, idle, or out of frame. In addition to the worker based performance measures, data relating to work-pieces are also calculated. These include the number of work-pieces processed by a specific worker, along with the average and variations in the processing times. The risk assessment is an automated approach of the revised NIOSH lifting equation. The system calculates when a worker makes and/or breaks contact with the work-piece and uses the joint locations from the skeletal tracker to calculate the variables used in the determination of the multipliers and ultimately the recommended weight limit and lifting index. The final calculation indicates whether the worker is at risk of developing a musculoskeletal disorder. Additionally the information provided on each of the multipliers highlights which elements of the lifting task contribute the most to the risk. The user-interface design ensures that the system is easy to use. The interface also displays the results of the study enabling analysts to assess worker performance at any time in real time. The automated system therefore enables analysts to respond rapidly to rectify problems. The system also reduces the complexity of performing studies and it eliminates human errors. The time and costs required to perform the studies are reduced and the system can become a permanent fixture on factory floors. The development of the automated system opens the door for further development of the system to ultimately enable more detailed assessments of productivity and risk. / AFRIKAANSE OPSOMMING: Produktiwiteit en risiko evaluerings word in hierdie tesis saam hanteer deur die innoverende ontwerp, ontwikkeling en evaluering van 'n unieke stelsel vir die meting en ontleding van data. Alhoewel die skakel tussen hulle goed gedokumenteer is, word hierdie evaluering as afsonderlike antagonistiese entiteite hanteer. 'n Breë studie van die bestaande tradisionele en tegnologiese ondersteuningstelsels is gedoen om toepaslike metodes te identifiseer, om 'n gemeenskaplike tegnologiese platform vir outomatisering daar te stel. Die metodes wat gekies is vir die produktiwiteit en risiko bepalings is onderskeidelik werk monsterneming en die hersiende NIOSH opheffing vergelyking. Die outomatisering van hierdie prosedures word gefasiliteer deur middel van rekenaar visie en die gebruik van 'n Kinect™ 3D kamera. Die selfstandige C++ program integreer ‘n dubbelvolgings benadering om in reële tyd posisionele data van die werker en die werk-stuk te kry. Die OpenNI en OpenCV biblioteke word onderskeidelik gebruik om skeletale volging en beeld erkenning uit te voer. Die skeletale volger bepaal posisionele data van spesifieke gewrigte van die werker, terwyl die beeld erkenning komponent, 'n SURF implementering gebruik om 'n spesifieke werk-stuk binne die opname raam te identifiseer en te volg. Hierdie volgings tegnieke is berekenings intensief. Om werklike tyd uitvoering van die program te verseker, is Nvidia se CUDA gereedskapstel en liggewig boublokke geimplementeer. Die produktiwiteit meting-stelsel is 'n aaneenlopende monsterneming benadering van werk monsterneming. Die spoed van die werker se handbewegings en nabyheid aan die werkstuk word gebruik om die werker te klassifiseer as in een van vier moontlike toestande; besig, staties, onaktief of buite die raam. Benewens die werker gebaseerde metings, word daar ook data oor werkstukke bereken. Dit sluit in die aantal werkstukke verwerk deur 'n spesifieke werker, sowel as die gemiddelde en variasie in verwerkings tye. Die risiko-berekening is 'n outomatiese benadering van die hersiende NIOSH opheffing vergelyking. Die stelsel bereken wanneer die werker kontak maak en/of breek met die werkstuk en maak gebruik van die gewrigsposisies wat die skeletale volger aandui om die veranderlikes wat in die vermenigvuldigers gebruik word te bepaal. Die vermenigvuldigers word gebruik om die aanbevole maksimum gewig en die opheffing indeks te bereken. Die opheffing indeks dui aan of daar ‘n risiko vir die werker is om muskuloskeletale versteuring te ontwikkel. Benewens dui die vermenigvuldigers aan watter elemente die grootste bydra tot die risiko van die opheffingstaak maak. Die gebruiker-koppelvlak-ontwerp verseker dat die stelsel maklik is om te gebruik. Die koppelvlak vertoon ook die resultate van die studie sodat ontleders op enige tyd werker prestasie kan evalueer in reële tyd. Die outomatiese stelsel stel dus ontleders in staat om vinnig te reageer sodat probleme reggestel kan word. Die stelsel verminder ook die kompleksiteit vir die uitvoering van studies en dit elimineer menslike foute. Die tyd en koste vereis om die studie te doen, word verminder en die stelsel kan ‘n permanente instelling op fabriekvloere geword. Die ontwikkeling van die outomatiese stelsel maak die deur oop vir verdere ontwikkeling van die stelsel om uiteindelik daartoe te lei dat meer gedetailleerde evaluering van produktiwiteit en risiko bepaal kan word.

The focus of this investigation was an analysis of the work demands being placed on South African automotive industry workers as there is a recognised problem with regard to the prevalence of musculoskeletal disorders (MSDs). Preliminary work was conducted to highlight the dominant risks and areas which elicited higher numbers of MSDs within the chosen automotive plant. An area of concern was highlighted through medical record analysis and the use of risk assessment tools, thereby prioritising the need for ergonomic intervention. In particular, the effects of varying restricted and overhead work heights on the biomechanical, physiological and psychophysical responses of an individual were investigated. Twenty-eight subjects were required to complete sixteen conditions. The conditions consisted of the adoption of restricted and upright overhead static postures, with half requiring the holding of four kilograms of weight in the hands and the remaining eight conditions having no weight. Testing was carried out using an electromyography unit, ergospirometer and a perceptual Body Discomfort Map and Scale. This involved a habituation and testing session. The results of the testing revealed the biomechanical and physiological responses were dependant on the change in height. Body discomfort was also shown to be variable over the changing height conditions. This indicates that there is a significant effect of height on an individual’s responses during overhead work. The extreme restricted (-200mm and -100mm) and upright (+300mm and +400mm) overhead conditions within this study were limiting, as they elicited the highest muscle activation, physiological responses and body discomfort ratings. Positions that are preferable to adopt, which were identified from the results in this study, indicate conditions closer to head height (0mm and +100mm) were favourable. The results therefore illustrate how awkward working postures during work are likely to elicit higher demands from an individual, which could lead to an increased risk for the development of a musculoskeletal disorder. The added factor of weight elicited significant results over all variables, excluding a respiratory The focus of this investigation was an analysis of the work demands being placed on South African automotive industry workers as there is a recognised problem with regard to the prevalence of musculoskeletal disorders (MSDs). Preliminary work was conducted to highlight the dominant risks and areas which elicited higher numbers of MSDs within the chosen automotive plant. An area of concern was highlighted through medical record analysis and the use of risk assessment tools, thereby prioritising the need for ergonomic intervention. In particular, the effects of varying restricted and overhead work heights on the biomechanical, physiological and psychophysical responses of an individual were investigated. Twenty-eight subjects were required to complete sixteen conditions. The conditions consisted of the adoption of restricted and upright overhead static postures, with half requiring the holding of four kilograms of weight in the hands and the remaining eight conditions having no weight. Testing was carried out using an electromyography unit, ergospirometer and a perceptual Body Discomfort Map and Scale. This involved a habituation and testing session. The results of the testing revealed the biomechanical and physiological responses were dependant on the change in height. Body discomfort was also shown to be variable over the changing height conditions. This indicates that there is a significant effect of height on an individual’s responses during overhead work. The extreme restricted (-200mm and -100mm) and upright (+300mm and +400mm) overhead conditions within this study were limiting, as they elicited the highest muscle activation, physiological responses and body discomfort ratings. Positions that are preferable to adopt, which were identified from the results in this study, indicate conditions closer to head height (0mm and +100mm) were favourable. The results therefore illustrate how awkward working postures during work are likely to elicit higher demands from an individual, which could lead to an increased risk for the development of a musculoskeletal disorder. The added factor of weight elicited significant results over all variables, excluding a respiratory individual.