yes / This paper describes the characterization and design of energy efficient user terminal transceiver power amplifier. To reduce the design of bulky external circuitry, the load modulation technique is employed. The design core is based on the combination of Class B and Class C that includes quarter wavelength transformer at the output to perform the load modulation. The handset transceiver for this power amplifier is designed to operate over the frequency range of 3.4GHz to 3.6GHz mobile WiMAX band. The performances of the load modulation amplifier are compared with conventional Class B amplifier. The results of 30dBm output power and 53% power added efficiency are achieved.

Yes / The biggest challenge for future 4G systems is the need to limit the energy consumptions of battery-powered and base station devices, with the aim to prolong their operational time and avoid active cooling in the base station. The green wireless communications requires research in areas such as energy efficient RF front end, MAC protocol, networking, deployment, operation, and also the integration of base station with renewable power supply. In this paper, the design concept of energy efficient RF front end is considered in terms of RF power amplifiers at which it represents the workhorse of modern wireless communication systems and inherently nonlinear. The approach of output power back off is to amplify the signal at the linear region to avoid distortion, but this approach suffers from significant reduction in efficiency and power output. To boost the efficiency at wide range of output power and keep the same margin for signal with high crest factor, the load modulation technique with new offset line are employed to operate over the frequency range of 3.4GHz to 3.6GHz band. The performances of load modulation power amplifier are compared with balanced amplifier. The results of 42dBm output power and 62% power added efficiency are achieved.