Thesis (Ed. D.)--University of Montana, 2006. / Title from title screen. Description based on contents viewed Mar. 29, 2007. Includes bibliographical references (p. 81-87).

Thesis (Ph. D.)--University of Texas at Austin, 2006. / Vita. Includes bibliographical references.

Thesis (Ph. D.)--University of Texas at Austin, 2006. / Vita. Includes bibliographical references.

Thesis (M.S.)--Virginia Polytechnic Institute and State University, 1983. / Vita. Abstract. Includes bibliographical references (leaves 106-111). Also available via the Internet.

The primary goal for this PhD project has been to investigate instability of reversiblepump turbines (RPTs) as a phenomenon and to find remedies to solve it. The instability occurs for turbines with s-shaped characteristics, unfavourable waterways and limited rotating inertia. It is only observed for certain operation points at either high speed or low load. These correspond to either high values of Ned or low values of Qed. The work done in this PhD thesis can be divided into the three following categories. Investigate and understand the behaviour of a pump turbine: A model was designed in order to investigate the pump turbine behaviour related to its characteristics. This model was manufactured and measurements were performed in the laboratory. By using throttling valves or torque as input the full s-shaped characteristics was measured. When neither of these techniques is used, the laboratory system has unstable operation points which result in hysteresis behaviour. Global behaviour of the RPT in a power plant system was investigated through analytical stability analysis and dynamic system simulations. The latter included both rigid and elastic representation of the water column. Turbine internal flow: The flow inside the runner was investigated by computer simulations (CFD). Two-dimensional analysis was used to study the inlet part of the runner. This showed that a vortex forming at the inlet is one of the causes for the unstable characteristics. Three-dimensional analyses were performed and showed multiple complex flow structures in the unstable operation range. Measurements at different pressure levels showed that the characteristics were dependent on the Reynolds number at high Ned values in turbine mode. This means that the similarity of flows is not sufficiently described by constant Qed and Ned values at this part of the characteristics. Design modifications: The root of the stability problem was considered to be the runner’s geometric design at the inlet in turbine mode. Therefore different design parameters were investigated to find relations to the characteristics. Methods used were measurements, CFD modelling and analytical models. The leading edge profile was altered on the physical model and measurements were performed in the laboratory. Results showed that the profiles have significant influence on characteristics and therewith stability at high speed operation points. Other design parameters were investigated by CFD analysis with special focus on the inlet blade angle.

This thesis will focus on spherical near-field antenna measurements and the methods developed or modified for the work of this thesis to estimate the uncertainty in a particular far-field radiation pattern. We will discuss the need for error assessment in spherical near-field antenna measurements. A procedure will be proposed that, in an automated fashion, can be used to determine the overall uncertainty in the measured far-field radiation pattern of a particular antenna. This overall uncertainty will be the result of a combination of several known sources of error common to SNF measurements. This procedure will consist of several standard SNF measurements, some newly developed tests, and several stages of post-processing of the measured data. The automated procedure will be tested on four antennas of various operating frequencies and directivities to verify its functionality. Finally, total uncertainty data will be presented to the reader in several formats.

Fundamental to the understanding of how rivers transform and shape our environment is the role of turbulence and complex, three-dimensional flow, such as vorticity, in sediment transport and erosion. However, classical sediment transport models (or formulae) are based, for the most part, on boundary shear stress and do not incorporate these natural phenomena. This is understandable given that the relationship between turbulence generation, intensity and form; the influence of turbulence on mobile sediment; and the magnitude and patterns of deposition and erosion are complex and difficult to quantify. Nevertheless, the failure to incorporate turbulence and complex, three-dimensional flow into existing models means that our understanding of sediment transport remains incomplete. The central hypothesis of this thesis is that vortical motion is the main factor in the development of local scour. To examine this, a comprehensive experimental approach was taken. This approach involved detailed measurements of the unique three-dimensional patterns of velocity, turbulence and bed morphology associated with flow in an open channel with and without the presence of submerged groyne-like structures (stream barbs and wing dikes) at both the laboratory and field scales. Using densely spaced velocity data and new techniques for processing and analyzing these data, it was possible to identify complex features of the flow field at both scales, such as the presence of vortex cores, and correlate these with changes in bed levels. These data provide a unique perspective of the spatial variability of velocity, turbulence and bed morphology in open channels (and in particular in channel bends, where flow is highly three-dimensional). In particular, it was found that, of the flow parameters analyzed, turbulent stresses were most correlated to scour in channel bends without the presence of structures. In contrast, vorticity was found to be the dominant factor in local scour hole development in the vicinity of submerged structures at both the laboratory and field scale. Such data are rare (if non-existent) in existing experimental research, particularly at the scale of a large natural river. This research also examines stream barb design and performance. Stream barbs (also known as submerged groynes or spur dikes) are a relatively novel approach to stream bank protection and are not common in Canada. The design and installation of stream barbs in a creek in Ottawa (Sawmill Creek) was undertaken to serve as a demonstration project for the use of these structures in a semi-alluvial channel, for which no such case studies exist. Three years of monitoring the site and the performance of these structures to reduce bank erosion and improve aquatic habitat have been carried out. Laboratory testing of stream barb performance was also undertaken and showed that with improper design, the outer bank in a channel bend may be more susceptible to erosion due to excessive local scour downstream of the barb. In particular, to avoid bank erosion downstream of the barb, barbs should be small, such that they create minimum flow obstruction, and include a bank key that is wider than the barb itself and extends in the downstream direction.

The Retarding Field Energy Analyzer (RFEA, RFA) is a simple and reliable diagnostic technique to measure the ion temperature in the Scrape-Off Layer (SOL) and edge of magnetic fusion devices. Design and operation features of a single-sided (facing the ion down stream side) RFEA for ion temperature measurements in the STOR-M tokamak are described. Its compact size (21 × 15 × 20 mm3 ) allows RFEA measurements without perturbing plasma significantly. Both ion and electron tem- perature have been measured by RFEA in the STOR-M tokamak. A method is proposed to correct the effects of ion flow on the ion temperature using the simultaneously measured Mach number. The measured electron temperature is consistent with the previously reported Langmuir probe data. Abnormal behavior of the RFEA has been observed in both ion and electron modes when RFEA is inserted deep into the plasma.

This study was designed to determine if any differences in internal consistency existed between different designs of scale anchors. The three different designs explored were properly designed scales, improperly designed scales, and endpoint only scales. Two-Hundred and thirty-five participants rated the frequency of which they performed various computer activities on a survey using one of the three different designs. Contrary to expectations, internal consistency did not differ across the three designs.

This thesis will focus on spherical near-field antenna measurements and the methods developed or modified for the work of this thesis to estimate the uncertainty in a particular far-field radiation pattern. We will discuss the need for error assessment in spherical near-field antenna measurements. A procedure will be proposed that, in an automated fashion, can be used to determine the overall uncertainty in the measured far-field radiation pattern of a particular antenna. This overall uncertainty will be the result of a combination of several known sources of error common to SNF measurements. This procedure will consist of several standard SNF measurements, some newly developed tests, and several stages of post-processing of the measured data. The automated procedure will be tested on four antennas of various operating frequencies and directivities to verify its functionality. Finally, total uncertainty data will be presented to the reader in several formats.