No

The research investigates the influence on the human body on a communication system. To understand this, the effect of hands free kit (HFK) on energy absorption in the body was investigated when operating a smart phone at 2G. Findings on the research are given in the thesis report. Also, the influence of the way in which a phone is held on a phone s received power was investigated. The result was compared to that obtained using a hand phantom acquired from SPEAG. This was to check if the hand phantom best represents the human hand when using it in experiments. The setup for the experiment was in an anechoic chamber at Loughborough University. The mobile phone transmitted in the 2G system. In further experiments carried out on the body, two antennas were attached to the body in six different orientations to receive power from a source creating a Single Input Multiple Output (SIMO) system. The antennas used were monopoles mounted on a circular ground plane. These antennas were designed and constructed with the influence of the body taken into consideration. The use of diversity techniques to improve transmission to an on-body system is investigated with the antennas on the body. For each alignment, the transmission to the on-body was compared with the transmission to the corresponding off-body (free space). Experiments for this work were carried out in three environments.

Yes / This article presented a novel compact multi-input-multi-output (MIMO) hexagonal monopole antenna with a uniplanar compact frequency-selective-surface (FSS) array for microwave imaging (MWI). The ultra-wideband (UWB) dual-element linear MIMO antenna was designed on the FR4 substrate with 50 Ω coplanar waveguide feed, T-strip isolation, novel numerical calculation, and equivalent circuit analyses. The main issues of realising high-resolution images based on planer UWB antenna for MWI are the low gain, omnidirectional pattern, design size, and mutual coupling of MIMO design. A novel technique was proposed to solve a hybrid issue (mutual coupling) of the MIMO reflected-waves from the FSS array and direct-wave. The uniplanar UWB-FSS unit cell was compacted by combining a square-loop and cross-dipole with a size of 0.095λ×0.095λ. The novel isolated UWB-MIMO antenna and UWB-FSS array (IMAF) were integrated, after investigating the distance between the antenna and FSS. The fabricated IMAF with a stable gain improvement of 4.5 dBi higher than the antenna without FSS, directional radiation pattern, size of 30×73.8×21.6 mm3 observed that a low mutual coupling of -27 dB, and operation bandwidth of 3.0-11.7 GHz. Moreover, a handbag was scanned experimentally via the bi-static approach to detect a small concealed object. The MWI system based on the MIMO antenna with FSS was displayed image resolution of 55% higher than that of MIMO antenna without FSS. The new baggage-scanner approach confirmed that the proposed MIMO antenna with FSS array can lead the humanity for healthy MWI applications.

Yes / This study presents a wideband multiple-input-multiple-output (MIMO) antenna for Wifi/WLAN/LTE applications. The antenna consists of two triangular patches as the radiating elements placed orthogonally to each other. Two T-slots and a rectangular slot were etched on the ground plane to improve return loss and isolation. The total dimension of the proposed antenna is 30 x 30 mm2. The antenna yields impedance bandwidth of 101.7% between 2.28 GHz up to 7 GHz with a reflection coefficient of < -10 dB, and mutual coupling of < -14 dB. The results including S-Parameters, MIMO characteristics with analysis of envelope correlation coefficient (ECC), total active reflection coefficient (TARC), capacity loss, channel capacity, VSWR, antenna gain and radiation patterns are evaluated. These characteristics indicate that the proposed antenna is suitable for MIMO wireless applications.

Yes / An offset quad-element, two-port, high-gain, and multiband multiple-input multiple-output (MIMO) planar antenna based on a log-periodic dipole array (LPDA) for Ku/K-band wireless communications is proposed, in this paper. A single element antenna has been designed starting from Carrel's theory and then optimized with a 50-Ω microstrip feed-line with two orthogonal branches that results mainly in a broadside radiation pattern and improves diversity parameters. For experimental confirmation, the designed structure is printed on an RT-5880 substrate with a thickness of 1.57 mm. The total substrate dimensions of the MIMO antenna are 55 × 45 mm2. According to the measured results, the designed structure is capable of working at 1.3% (12.82-12.98 GHz), 3.1% (13.54-13.96 GHz), 2.3% (14.81-15.15 GHz), 4.5% (17.7-18.52 GHz), and 4.6% (21.1-22.1 GHz) frequency bands. Additionally, the proposed MIMO antenna attains a peak gain of 4.2-10.7 dBi with maximum element isolation of 23.5 dB, without the use of any decoupling structure. Furthermore, the analysis of MIMO performance metrics such as the envelope correlation coefficient (ECC) and mean effective gain (MEG) validates good characteristics, and field correlation performance over the operating band. The proposed design is an appropriate option for multiband MIMO applications for various wireless systems in Ku/K-bands.

In this dissertation, not only the antenna and antenna array design techniques for fourth-generation mobile communication system are proposed, but also the specifications related to antenna bio-compatibility are studied. At first, two dual-wideband design techniques suitable to be applied for laptop computer applications for LTE/WWAN and LTE MIMO operations are proposed. The techniques can also be applied to internal tablet computer antennas. The isolation issues of MIMO antenna array of different mobile communication devices, such as laptop computer, tablet computer, and mobile phone, are then discussed. Finally, an analysis of body SAR for tablet computer applications are given and discussed.

No / This study presents a miniaturised multiple input and multiple output /diversity antenna which is suitable for high data-rate communication systems such as mobile ultra-wideband (UWB). This antenna assembly comprises two identical planar inverted-F antennas, a T-shaped structure connecting them and a finite ground plane. The T-shaped structure improves the impedance matching and suppresses the mutual coupling between the antenna elements over a wider bandwidth than previously reported. The compact envelope dimension of this antenna is 50 x 90 x 7.5 mm(3). Theoretical and experimental S-parameters are illustrated for this antenna that fully cover the UWB operating frequency band of 3.1-10.6 GHz, with a reflection coefficient and mutual coupling better than -10 and -20 dB, respectively. Acceptable agreement is obtained between computed and measured radiation patterns, gains, envelope correlation coefficient and channel capacity loss. The proposed antenna is an attractive candidate to provide pattern diversity and enhance channel capacity in a rich scattering environment.

Yes / This paper presented a planar printed multiple-input-multiple-output (MIMO) antenna with a dimension of 100 x 45 mm2. It composed of two crescent shaped radiators placed symmetrically with respect to the ground plane. Neutralization line applied to suppress mutual coupling. The proposed antenna examined both theoretically and experimentally, which achieves an impedance bandwidth of 18.67% (over 2.04-2.46 GHz) with a reflection coefficient < -10 dB and mutual coupling minimization of < -20 dB. An evaluation of MIMO antennas is presented, with analysis of correlation coefficient, total active reflection coefficient (TARC) and capacity loss. These characteristics indicate that the proposed antenna suitable for some wireless applications.

Multiple-Input Multiple-Output (MIMO) systems are a pivotal solution for the significant enhancement of the band-limited wireless channels’ communication capacity. MIMO system is essentially a wireless system with multiple antennas at both the transmitter and receiver ends. Compared to the conventional wireless systems, the main advantages of the MIMO systems are the higher system capacity, more bit rates, more link reliability, and wider coverage area. All of these features are currently considered as crucial performance requirements in wireless communications. Additionally, the emerging new services in wireless applications have created a great motivation to utilize the MIMO systems to fulfil the demands these applications create. The MIMO systems can be combined with other intelligent techniques to achieve these benefits by employing a higher spectral efficiency. The MIMO system design is a multifaceted problem which needs both antenna considerations and baseband signal processing. The performance of the MIMO systems depends on the cross-correlation coefficients between the transmitted/received signals by different antenna elements. Therefore, the Electromagnetic (EM) characteristics of the antenna elements and wireless environment can significantly affect the MIMO system performance. Hence, it is important to include the EM properties of the antenna elements and the physical environment in the MIMO system design and optimizations. In this research, the MIMO system model and system performance are introduced, and the optimum MIMO antenna system is investigated and developed by considering the electromagnetic aspects within three inter-related topics: 1) Fast Numerical Analysis and Optimization of the MIMO Antenna Structures: An efficient and fast optimization method is proposed based on the reciprocity theorem along with the method of moment analysis to minimize the correlation among the received/transmitted signals in MIMO systems. In this method, the effects of the radio package (enclosure) on the MIMO system performance are also included. The proposed optimization method is used in a few practical examples to find the optimal positions and orientations of the antenna elements on the system enclosure in order to minimize the cross-correlation coefficients, leading to an efficient MIMO operation. 2) Analytical Electromagnetic-Theoretic Model for the MIMO Antenna Design: The first requirement for the MIMO antennas is to obtain orthogonal radiation modes in order to achieve uncorrelated signals. Since the Spherical Vector Waves (SVW) form a complete set of orthogonal Eigen-vector functions for the radiated electromagnetic fields, an analytical method based on the SVW approach is developed to excite the orthogonal SVWs to be used as the various orthogonal modes of the MIMO antenna systems. The analytic SVW approach is used to design spherical antennas and to investigate the orthogonality of the radiation modes in the planar antenna structures. 3) Systematic SVW Methodology for the MIMO Antenna Design: Based on the spherical vector waves, a generalized systematic method is proposed for the MIMO antenna design and analysis. The newly developed methodology not only leads to a systematic approach for designing MIMO antennas, but can also be used to determine the fundamental limits and degrees of freedom for designing the optimal antenna elements in terms of the given practical restrictions. The proposed method includes the EM aspects of the antenna elements and the physical environment in the MIMO antenna system, which will provide a general guideline for obtaining the optimal current sources to achieve the orthogonal MIMO modes. The proposed methodology can be employed for any arbitrary physical environment and multi-antenna structures. Without the loss of generality, the SVW approach is employed to design and analyze a few practical examples to show how effective it can be used for MIMO applications. In conclusion, this research addresses the electromagnetic aspects of the antenna analysis, design, and optimization for MIMO applications in a rigorous and systematic manner. Developing such a design and analysis tool significantly contributes to the advancement of high-data-rate wireless communication and to the realistic evaluation of the MIMO antenna system performance by a robust scientifically-based design methodology.

Multiple-Input Multiple-Output (MIMO) systems are a pivotal solution for the significant enhancement of the band-limited wireless channels’ communication capacity. MIMO system is essentially a wireless system with multiple antennas at both the transmitter and receiver ends. Compared to the conventional wireless systems, the main advantages of the MIMO systems are the higher system capacity, more bit rates, more link reliability, and wider coverage area. All of these features are currently considered as crucial performance requirements in wireless communications. Additionally, the emerging new services in wireless applications have created a great motivation to utilize the MIMO systems to fulfil the demands these applications create. The MIMO systems can be combined with other intelligent techniques to achieve these benefits by employing a higher spectral efficiency. The MIMO system design is a multifaceted problem which needs both antenna considerations and baseband signal processing. The performance of the MIMO systems depends on the cross-correlation coefficients between the transmitted/received signals by different antenna elements. Therefore, the Electromagnetic (EM) characteristics of the antenna elements and wireless environment can significantly affect the MIMO system performance. Hence, it is important to include the EM properties of the antenna elements and the physical environment in the MIMO system design and optimizations. In this research, the MIMO system model and system performance are introduced, and the optimum MIMO antenna system is investigated and developed by considering the electromagnetic aspects within three inter-related topics: 1) Fast Numerical Analysis and Optimization of the MIMO Antenna Structures: An efficient and fast optimization method is proposed based on the reciprocity theorem along with the method of moment analysis to minimize the correlation among the received/transmitted signals in MIMO systems. In this method, the effects of the radio package (enclosure) on the MIMO system performance are also included. The proposed optimization method is used in a few practical examples to find the optimal positions and orientations of the antenna elements on the system enclosure in order to minimize the cross-correlation coefficients, leading to an efficient MIMO operation. 2) Analytical Electromagnetic-Theoretic Model for the MIMO Antenna Design: The first requirement for the MIMO antennas is to obtain orthogonal radiation modes in order to achieve uncorrelated signals. Since the Spherical Vector Waves (SVW) form a complete set of orthogonal Eigen-vector functions for the radiated electromagnetic fields, an analytical method based on the SVW approach is developed to excite the orthogonal SVWs to be used as the various orthogonal modes of the MIMO antenna systems. The analytic SVW approach is used to design spherical antennas and to investigate the orthogonality of the radiation modes in the planar antenna structures. 3) Systematic SVW Methodology for the MIMO Antenna Design: Based on the spherical vector waves, a generalized systematic method is proposed for the MIMO antenna design and analysis. The newly developed methodology not only leads to a systematic approach for designing MIMO antennas, but can also be used to determine the fundamental limits and degrees of freedom for designing the optimal antenna elements in terms of the given practical restrictions. The proposed method includes the EM aspects of the antenna elements and the physical environment in the MIMO antenna system, which will provide a general guideline for obtaining the optimal current sources to achieve the orthogonal MIMO modes. The proposed methodology can be employed for any arbitrary physical environment and multi-antenna structures. Without the loss of generality, the SVW approach is employed to design and analyze a few practical examples to show how effective it can be used for MIMO applications. In conclusion, this research addresses the electromagnetic aspects of the antenna analysis, design, and optimization for MIMO applications in a rigorous and systematic manner. Developing such a design and analysis tool significantly contributes to the advancement of high-data-rate wireless communication and to the realistic evaluation of the MIMO antenna system performance by a robust scientifically-based design methodology.