1 |
Predicting dementia status from Mini-Mental State Exam scores using group-based trajectory modellingBrown, Cassandra Lynn 24 August 2012 (has links)
Background: Longitudinal studies enable the study of within person change over time in addition to between person differences. In longitudinal studies of older adult populations even when not the question of interest, identifying participants with dementia is desirable, and often necessary. Yet in practice, the time to collect information from each participant may be limited. Therefore, some studies include only a brief general cognitive measure of which the Mini Mental State Examination (MMSE) is the most commonly used (Raina et al., 2009). The current study explores whether group-based trajectory modeling of MMSE scores with a selection of covariates can identify individuals who have or will develop dementia in an 8 year longitudinal study. Methods: The sample included 651 individuals from the Origins of Variance in the Oldest Old study of Swedish twins 80 years old or older (OCTO-Twin). Participants had completed the MMSE every two years, and cases of dementia were diagnosed according to DSM-III criteria. The accuracy of using the classes formed in growth mixture modeling and latent class growth modeling as indicative of dementia status was compared to that of more standard methods, the typical 24/30 cut score and a logistic regression. Results: A three-class quadratic model with covariate effects on class membership was found to best characterize the data. The classes were characterized as High Performing Late Decline, Rapidly Declining, and Decreasing Low Performance, and were labeled as such. Comparing the diagnostic accuracy of the latent trajectory groups against simple methods; the sensitivity of the final model was lower but it was the same or superior in specificity, positive predictive value, negative predictive value, and allowed a more fine-grained analysis of participant risk. Conclusions: Group-based trajectory models may be helpful for grouping longitudinal study participants, particularly if sensitivity is not the primary concern. / Graduate
|
2 |
Bayesian inference on mixture models and their applicationsChang, Ilsung 16 August 2006 (has links)
Mixture models are useful in describing a wide variety of random phenomena because
of their flexibility in modeling. They have continued to receive increasing attention
over the years from both a practical and theoretical point of view. In their applications,
estimating the number of mixture components is often the main research
objective or the first step toward it. Estimation of the number of mixture components
heavily depends on the underlying distribution. As an extension of normal
mixture models, we introduce a skew-normal mixture model and adapt the reversible
jump Markov chain Monte Carlo algorithm to estimate the number of components
with some applications to biological data.
The reversible jump algorithm is also applied to the Cox proportional hazard
model with frailty. We consider a regression model for the variance components in
the proportional hazards frailty model. We propose a Bayesian model averaging procedure
with a reversible jump Markov chain Monte Carlo step which selects the model
automatically. The resulting regression coefficient estimates ignore the model uncertainty
from the frailty distribution. Finally, the proposed model and the estimation
procedure are illustrated with simulated example and real data.
|
3 |
Latent Class Model in Transportation StudyZhang, Dengfeng 20 January 2015 (has links)
Statistics, as a critical component in transportation research, has been widely used to analyze driver safety, travel time, traffic flow and numerous other problems. Many of these popular topics can be interpreted as to establish the statistical models for the latent structure of data. Over the past several years, the interest in latent class models has continuously increased due to their great potential in solving practical problems. In this dissertation, I developed several latent class models to quantitatively analyze the hidden structure of transportation data and addressed related application issues.
The first model is focused on the uncertainty of travel time, which is critical for assessing the reliability of transportation systems. Travel time is random in nature, and contains substantial variability, especially under congested traffic conditions. A Bayesian mixture model, with the ability to incorporate the influence from covariates such as traffic volume, has been proposed. This model advances the previous multi-state travel time reliability model in which the relationship between response and predictors was lacking.
The Bayesian mixture travel time model, however, lack the power to accurately predict the future travel time. The analysis indicates that the independence assumption, which is difficult to justify in real data, could be a potential issue. Therefore, I proposed a Hidden Markov model to accommodate dependency structure, and the modeling results were significantly improved.
The second and third parts of the dissertation focus on the driver safety identification. Given the demographic information and crash history, the number of crashes, as a type of count data, is commonly modeled by Poisson regression. However, the over-dispersion issue within the data implies that a single Poisson distribution is insufficient to depict the substantial variability. Poisson mixture model is proposed and applied to identify risky and safe drivers. The lower bound of the estimated misclassification rate is evaluated using the concept of overlap probability. Several theoretical results have been discussed regarding the overlap probability. I also introduced quantile regression based on discrete data to specifically model the high-risk drivers.
In summary, the major objective of my research is to develop latent class methods and explore the hidden structure within the transportation data, and the approaches I employed can also be implemented for similar research questions in other areas. / Ph. D.
|
4 |
Hypothesis Testing in Finite Mixture ModelsLi, Pengfei 11 December 2007 (has links)
Mixture models provide a natural framework for
unobserved heterogeneity in a population.
They are widely applied in astronomy, biology,
engineering, finance, genetics, medicine, social sciences,
and other areas.
An important first step for using mixture models is the test
of homogeneity. Before one tries to fit a mixture model,
it might be of value to know whether the data arise from a
homogeneous or heterogeneous population. If the data are
homogeneous, it is not even necessary to go into mixture modeling.
The rejection of the homogeneous model may also have scientific implications.
For example, in classical statistical genetics,
it is often suspected that only a subgroup of patients have a
disease gene which is linked to the marker. Detecting
the existence of this subgroup amounts to the rejection of
a homogeneous null model in favour of a two-component
mixture model. This problem has attracted intensive
research recently. This thesis makes substantial contributions
in this area of research.
Due to partial loss of identifiability, classic inference methods
such as the likelihood ratio test (LRT) lose their usual elegant
statistical properties. The limiting distribution of the LRT
often involves complex Gaussian processes,
which can be hard to implement in data analysis.
The modified likelihood ratio test (MLRT) is found to be a nice
alternative of the LRT. It restores the identifiability by introducing
a penalty to the log-likelihood function.
Under some mild conditions,
the limiting distribution of the MLRT is
1/2\chi^2_0+1/2\chi^2_1,
where \chi^2_{0} is a point mass at 0.
This limiting distribution is convenient to use in real data analysis.
The choice of the penalty functions in the MLRT is very flexible.
A good choice of the penalty enhances the power of the MLRT.
In this thesis, we first introduce a new class of penalty functions,
with which the MLRT enjoys a significantly improved power for testing
homogeneity.
The main contribution of this thesis is to propose a new class of
methods for testing homogeneity. Most existing methods in the
literature for testing of homogeneity, explicitly or implicitly, are
derived under the condition of finite Fisher information and a
compactness assumption on the space of the mixing parameters. The
finite Fisher information condition can prevent their usage to many
important mixture models, such as the mixture of geometric
distributions, the mixture of exponential distributions and more
generally mixture models in scale distribution families. The
compactness assumption often forces applicants to set artificial
bounds for the parameters of interest and makes the resulting
limiting distribution dependent on these bounds. Consequently,
developing a method without such restrictions is a dream of many
researchers. As it will be seen, the proposed EM-test in this thesis
is free of these shortcomings.
The EM-test combines the merits of the classic LRT and score test.
The properties of the EM-test are particularly easy to investigate
under single parameter mixture models.
It has a simple limiting distribution
0.5\chi^2_0+0.5\chi^2_1, the same as the MLRT.
This result is applicable to mixture models without requiring
the restrictive regularity conditions described earlier.
The normal mixture model is a very popular model in applications.
However it does not satisfy the strong identifiability condition,
which imposes substantial technical difficulties in the study of the
asymptotic properties. Most existing methods do not directly apply
to the normal mixture models, so the asymptotic properties have to
be developed separately. We investigate the use of the EM-test to
normal mixture models and its limiting distributions are derived.
For the homogeneity test in the presence of the structural
parameter, the limiting distribution is a simple function of the
0.5\chi^2_0+0.5\chi^2_1 and \chi^2_1 distributions. The test
with this limiting distribution is still very convenient to
implement. For normal mixtures in both mean and variance parameters,
the limiting distribution of the EM-test is found be to \chi^2_2.
Mixture models are also widely used in the analysis of the
directional data. The von Mises distribution is often regarded as
the circular normal model. Interestingly, it satisfies the strong
identifiability condition and the parameter space of the mean
direction is compact. However the theoretical results in the single
parameter mixture models can not directly apply to the von Mises
mixture models. Because of this, we also study the application of
the EM-test to von Mises mixture models in the presence of the
structural parameter. The limiting distribution of the EM-test is
also found to be 0.5\chi^2_0+0.5\chi^2_1.
Extensive simulation results are obtained to examine the precision
of the approximation of the limiting distributions to the finite
sample distributions of the EM-test. The type I errors with the
critical values determined by the limiting distributions are found
to be close to nominal values. In particular, we also propose
several precision enhancing methods, which are found to work well.
Real data examples are used to illustrate the use of the EM-test.
|
5 |
Hypothesis Testing in Finite Mixture ModelsLi, Pengfei 11 December 2007 (has links)
Mixture models provide a natural framework for
unobserved heterogeneity in a population.
They are widely applied in astronomy, biology,
engineering, finance, genetics, medicine, social sciences,
and other areas.
An important first step for using mixture models is the test
of homogeneity. Before one tries to fit a mixture model,
it might be of value to know whether the data arise from a
homogeneous or heterogeneous population. If the data are
homogeneous, it is not even necessary to go into mixture modeling.
The rejection of the homogeneous model may also have scientific implications.
For example, in classical statistical genetics,
it is often suspected that only a subgroup of patients have a
disease gene which is linked to the marker. Detecting
the existence of this subgroup amounts to the rejection of
a homogeneous null model in favour of a two-component
mixture model. This problem has attracted intensive
research recently. This thesis makes substantial contributions
in this area of research.
Due to partial loss of identifiability, classic inference methods
such as the likelihood ratio test (LRT) lose their usual elegant
statistical properties. The limiting distribution of the LRT
often involves complex Gaussian processes,
which can be hard to implement in data analysis.
The modified likelihood ratio test (MLRT) is found to be a nice
alternative of the LRT. It restores the identifiability by introducing
a penalty to the log-likelihood function.
Under some mild conditions,
the limiting distribution of the MLRT is
1/2\chi^2_0+1/2\chi^2_1,
where \chi^2_{0} is a point mass at 0.
This limiting distribution is convenient to use in real data analysis.
The choice of the penalty functions in the MLRT is very flexible.
A good choice of the penalty enhances the power of the MLRT.
In this thesis, we first introduce a new class of penalty functions,
with which the MLRT enjoys a significantly improved power for testing
homogeneity.
The main contribution of this thesis is to propose a new class of
methods for testing homogeneity. Most existing methods in the
literature for testing of homogeneity, explicitly or implicitly, are
derived under the condition of finite Fisher information and a
compactness assumption on the space of the mixing parameters. The
finite Fisher information condition can prevent their usage to many
important mixture models, such as the mixture of geometric
distributions, the mixture of exponential distributions and more
generally mixture models in scale distribution families. The
compactness assumption often forces applicants to set artificial
bounds for the parameters of interest and makes the resulting
limiting distribution dependent on these bounds. Consequently,
developing a method without such restrictions is a dream of many
researchers. As it will be seen, the proposed EM-test in this thesis
is free of these shortcomings.
The EM-test combines the merits of the classic LRT and score test.
The properties of the EM-test are particularly easy to investigate
under single parameter mixture models.
It has a simple limiting distribution
0.5\chi^2_0+0.5\chi^2_1, the same as the MLRT.
This result is applicable to mixture models without requiring
the restrictive regularity conditions described earlier.
The normal mixture model is a very popular model in applications.
However it does not satisfy the strong identifiability condition,
which imposes substantial technical difficulties in the study of the
asymptotic properties. Most existing methods do not directly apply
to the normal mixture models, so the asymptotic properties have to
be developed separately. We investigate the use of the EM-test to
normal mixture models and its limiting distributions are derived.
For the homogeneity test in the presence of the structural
parameter, the limiting distribution is a simple function of the
0.5\chi^2_0+0.5\chi^2_1 and \chi^2_1 distributions. The test
with this limiting distribution is still very convenient to
implement. For normal mixtures in both mean and variance parameters,
the limiting distribution of the EM-test is found be to \chi^2_2.
Mixture models are also widely used in the analysis of the
directional data. The von Mises distribution is often regarded as
the circular normal model. Interestingly, it satisfies the strong
identifiability condition and the parameter space of the mean
direction is compact. However the theoretical results in the single
parameter mixture models can not directly apply to the von Mises
mixture models. Because of this, we also study the application of
the EM-test to von Mises mixture models in the presence of the
structural parameter. The limiting distribution of the EM-test is
also found to be 0.5\chi^2_0+0.5\chi^2_1.
Extensive simulation results are obtained to examine the precision
of the approximation of the limiting distributions to the finite
sample distributions of the EM-test. The type I errors with the
critical values determined by the limiting distributions are found
to be close to nominal values. In particular, we also propose
several precision enhancing methods, which are found to work well.
Real data examples are used to illustrate the use of the EM-test.
|
6 |
Model-based Pre-processing in Protein Mass SpectrometryWagaman, John C. 2009 December 1900 (has links)
The discovery of proteomic information through the use of mass spectrometry (MS) has been an active area of research in the diagnosis and prognosis of many types of cancer. This process involves feature selection through peak detection but is often complicated by many forms of non-biologicalbias. The need to extract biologically relevant peak information from MS data has resulted in the development of statistical techniques to aid in spectra pre-processing. Baseline estimation and normalization are important pre-processing steps because the subsequent quantification of peak heights depends on this baseline estimate. This dissertation introduces a mixture model to estimate the baseline and peak heights simultaneously through the expectation-maximization (EM) algorithm and a penalized likelihood approach. Our model-based pre-processing performs well in the presence of raw, unnormalized data, with few subjective inputs. We also propose a model-based normalization solution for use in subsequent classification procedures, where misclassification results compare favorably with existing methods of normalization. The performance of our pre-processing method is evaluated using popular matrix-assisted laser desorption and ionization (MALDI) and surface-enhanced laser desorption and ionization (SELDI) datasets as well as through simulation.
|
7 |
Birthweight-specific neonatal health : With application on data from a tertiaryhospital in TanzaniaDahlqwist, Elisabeth January 2014 (has links)
The following study analyzes birthweight-specific neonatal health using a combination of a mixture model and logistic regression: the extended Parametric Mixture of Logistic Regression. The data are collected from the Obstetric database at Muhimbili National Hospital in Dar es Salaam, Tanzania and the years 2009 -2013 are used in the analysis. Due to rounding in the birthweight data a novel method to adjust for rounding when estimating a mixture model is applied. The influence of rounding on the estimates is then investigated. A three-component model is selected. The variables used in the analysis of neonatal health are early neonatal mortality, if the mother has HIV, anaemia, is a private patient and if the neonate is born after 36 completed weeks of gestation. It can be concluded that the mortality rates are high especially for low birthweights (2000 or less) in the estimated first and second components. However, due to wide confidence bounds it is hard to draw conclusions from the data.
|
8 |
Complete Bayesian analysis of some mixture time series modelsHossain, Shahadat January 2012 (has links)
In this thesis we consider some finite mixture time series models in which each component is following a well-known process, e.g. AR, ARMA or ARMA-GARCH process, with either normal-type errors or Student-t type errors. We develop MCMC methods and use them in the Bayesian analysis of these mixture models. We introduce some new models such as mixture of Student-t ARMA components and mixture of Student-t ARMA-GARCH components with complete Bayesian treatments. Moreover, we use component precision (instead of variance) with an additional hierarchical level which makes our model more consistent with the MCMC moves. We have implemented the proposed methods in R and give examples with real and simulated data.
|
9 |
Longitudinal Data Clustering Via Kernel Mixture ModelsZhang, Xi January 2021 (has links)
Kernel mixture models are proposed to cluster univariate, independent multivariate and dependent bivariate longitudinal data. The Gaussian distribution in finite mixture models is replaced by the Gaussian and gamma kernel functions, and the expectation-maximization algorithm is used to estimate bandwidths and compute log-likelihood scores. For dependent bivariate longitudinal data, the bivariate Gaussian copula is used to reveal the correlation between two attributes. After that, we use AIC, BIC and ICL to select the best model. In addition, we also introduce a kernel distance-based clustering method to compare with the kernel mixture models. A simulation is performed to illustrate the performance of this mixture model, and results show that the gamma kernel mixture model performs better than the kernel distance-based clustering method based on misclassification rates. Finally, these two models are applied to COVID-19 data, and sixty countries are classified into ten clusters based on growth rates and death rates. / Thesis / Master of Science (MSc)
|
10 |
Estimating the Proportion of True Null Hypotheses in Multiple Testing ProblemsOyeniran, Oluyemi 18 July 2016 (has links)
No description available.
|
Page generated in 0.0173 seconds