41 |
Effects of mechanical forces on cytoskeletal remodeling and stiffness of cultured smooth muscle cellsNa, Sungsoo 02 June 2009 (has links)
The cytoskeleton is a diverse, multi-protein framework that plays a fundamental role in many cellular activities including mitosis, cell division, intracellular transport, cell motility, muscle contraction, and the regulation of cell polarity and organization. Furthermore, cytoskeletal filaments have been implicated in the pathogenesis of a wide variety of diseases including cancer, blood disease, cardiovascular disease, inflammatory disease, neurodegenerative disease, and problems with skin, nail, cornea, hair, liver and colon. Increasing evidence suggests that the distribution and organization of the cytoskeleton in living cells are affected by mechanical stresses and the cytoskeleton determines cell stiffness. We developed a fully nonlinear, constrained mixture model for adherent cells that allows one to account separately for the contributions of the primary structural constituents of the cytoskeleton and extended a prior solution from the finite elasticity literature for use in a sub-class of atomic force microscopy (AFM) studies of cell mechanics. The model showed that the degree of substrate stretch and the geometry of the AFM tip dramatically affect the measured cell stiffness. Consistent with previous studies, the model showed that disruption of the actin filaments can reduce the stiffness substantially, whereas there can be little contribution to the overall cell stiffness by the microtubules or intermediate filaments. To investigate the effect of mechanical stretching on cytoskeletal remodeling and cell stiffness, we developed a simple cell-stretching device that can be combined with an AFM and confocal microscopy. Results demonstrate that cyclic stretching significantly and rapidly alters both cell stiffness and focal adhesion associated vinculin and paxillin, suggesting that focal adhesion remodeling plays a critical role in cell stiffness by recruiting and anchoring F-actin. Finally, we estimated cytoskeletal remodeling by synthesizing data on stretch-induced dynamic changes in cell stiffness and focal adhesion area using constrained mixture approach. Results suggest that the acute increase in stiffness in response to an increased cyclic stretch was probably due to an increased stretch of the original filaments whereas the subsequent decrease back towards normalcy was consistent with a replacement of the highly stretched original filaments with less stretched new filaments.
|
42 |
INFORMATION THEORETIC CRITERIA FOR IMAGE QUALITY ASSESSMENT BASED ON NATURAL SCENE STATISTICSZhang, Di January 2006 (has links)
Measurement of visual quality is crucial for various image and video processing applications. <br /><br /> The goal of objective image quality assessment is to introduce a computational quality metric that can predict image or video quality. Many methods have been proposed in the past decades. Traditionally, measurements convert the spatial data into some other feature domains, such as the Fourier domain, and detect the similarity, such as mean square distance or Minkowsky distance, between the test data and the reference or perfect data, however only limited success has been achieved. None of the complicated metrics show any great advantage over other existing metrics. <br /><br /> The common idea shared among many proposed objective quality metrics is that human visual error sensitivities vary in different spatial and temporal frequency and directional channels. In this thesis, image quality assessment is approached by proposing a novel framework to compute the lost information in each channel not the similarities as used in previous methods. Based on natural scene statistics and several image models, an information theoretic framework is designed to compute the perceptual information contained in images and evaluate image quality in the form of entropy. <br /><br /> The thesis is organized as follows. Chapter I give a general introduction about previous work in this research area and a brief description of the human visual system. In Chapter II statistical models for natural scenes are reviewed. Chapter III proposes the core ideas about the computation of the perceptual information contained in the images. In Chapter IV, information theoretic criteria for image quality assessment are defined. Chapter V presents the simulation results in detail. In the last chapter, future direction and improvements of this research are discussed.
|
43 |
Forecasting seat sales in passenger airlines: introducing the round-trip modelVaredi, Mehrdad 07 January 2010 (has links)
This thesis aims to improve sales forecasting in the context of passenger airlines. We study two important issues that could potentially improve forecasting accuracy: day-to-day price change rather than price itself, and linking flights that are likely to be considered as pairs for a round trip by passengers; we refer to the latter as the Round-Trip Model (RTM). We find that price change is a significant variable regardless of days remaining to flight in the last three weeks to flight departure, which opens the possibility of planning for revenue maximizing price change patterns. We also find that the RTM can improve the precision of the forecasting models, and provide an improved pricing strategy for planners.
In the study of the effect of price change on sales, analysis of variance is applied; finite regression mixture models were tested to identify linked traffic in the two directions and the linked flights on a route in reverse directions; adaptive neuro-fuzzy inference system (ANFIS) is applied to develop comparative models for studying sales effect between price and price change, and one-way versus round-trip models. The price change model demonstrated more robust results with comparable estimation errors, and the concept model for the round-trip with only one linked flight reduced estimation error by 5%. This empirical study is performed on a database with 22,900 flights which was obtained from a major North American passenger airline.
|
44 |
Effects of mechanical forces on cytoskeletal remodeling and stiffness of cultured smooth muscle cellsNa, Sungsoo 02 June 2009 (has links)
The cytoskeleton is a diverse, multi-protein framework that plays a fundamental role in many cellular activities including mitosis, cell division, intracellular transport, cell motility, muscle contraction, and the regulation of cell polarity and organization. Furthermore, cytoskeletal filaments have been implicated in the pathogenesis of a wide variety of diseases including cancer, blood disease, cardiovascular disease, inflammatory disease, neurodegenerative disease, and problems with skin, nail, cornea, hair, liver and colon. Increasing evidence suggests that the distribution and organization of the cytoskeleton in living cells are affected by mechanical stresses and the cytoskeleton determines cell stiffness. We developed a fully nonlinear, constrained mixture model for adherent cells that allows one to account separately for the contributions of the primary structural constituents of the cytoskeleton and extended a prior solution from the finite elasticity literature for use in a sub-class of atomic force microscopy (AFM) studies of cell mechanics. The model showed that the degree of substrate stretch and the geometry of the AFM tip dramatically affect the measured cell stiffness. Consistent with previous studies, the model showed that disruption of the actin filaments can reduce the stiffness substantially, whereas there can be little contribution to the overall cell stiffness by the microtubules or intermediate filaments. To investigate the effect of mechanical stretching on cytoskeletal remodeling and cell stiffness, we developed a simple cell-stretching device that can be combined with an AFM and confocal microscopy. Results demonstrate that cyclic stretching significantly and rapidly alters both cell stiffness and focal adhesion associated vinculin and paxillin, suggesting that focal adhesion remodeling plays a critical role in cell stiffness by recruiting and anchoring F-actin. Finally, we estimated cytoskeletal remodeling by synthesizing data on stretch-induced dynamic changes in cell stiffness and focal adhesion area using constrained mixture approach. Results suggest that the acute increase in stiffness in response to an increased cyclic stretch was probably due to an increased stretch of the original filaments whereas the subsequent decrease back towards normalcy was consistent with a replacement of the highly stretched original filaments with less stretched new filaments.
|
45 |
Person Identification Based on Karhunen-Loeve TransformChen, Chin-Ta 16 July 2004 (has links)
Abstract
In this dissertation, person identification systems based on Karhunen-Loeve transform (KLT) are investigated. Both speaker and face recognition are considered in our design. Among many aspects of the system design issues, three important problems: how to improve the correct classification rate, how to reduce the computational cost and how to increase the robustness property of the system, are addressed in this thesis.
Improvement of the correct classification rate and reduction of the computational cost for the person identification system can be accomplished by appropriate feature design methodology. KLT and hard-limited KLT (HLKLT) are proposed here to extract class related features. Theoretically, KLT is the optimal transform in minimum mean square error and maximal energy packing sense. The transformed data is totally uncorrelated and it contains most of the classification information in the first few coordinates. Therefore, satisfactory correct classification rate can be achieved by using only the first few KLT derived eigenfeatures.
In the above data transformation process, the transformed data is calculated from the inner products of the original samples and the selected eigenvectors. The computation is of course floating point arithmetic. If this linear transformation process can be further reduced to integer arithmetic, the time used for both person feature training and person classification will be greatly reduced. The hard-limiting process (HLKLT) here is used to extract the zero-crossing information in the eigenvectors, which is hypothesized to contain important information that can be used for classification. This kind of feature tremendously simplifies the linear transformation process since the computation is merely integer arithmetic.
In this thesis, it is demonstrated that the hard-limited KL transform has much simpler structure than that of the KL transform and it possess approximately the same excellent performances for both speaker identification system and face recognition system.
Moreover, a hybrid KLT/GMM speaker identification system is proposed in this thesis to improve classification rate and to save computational time. The increase of the correct rate comes from the fact that two different sets of speech features, one from the KLT features, the other from the MFCC features of the Gaussian mixture speaker model (GMM), are applied in the hybrid system.
Furthermore, this hybrid system performs classification in a sequential manner. In the first stage, the relatively faster KLT features are used as the initial candidate selection tool to discard those speakers with larger separability. Then in the second stage, the GMM is utilized as the final speaker recognition means to make the ultimate decision. Therefore, only a small portion of the speakers needed to be discriminated in the time-consuming GMM stage. Our results show that the combination is beneficial to both classification accuracy and computational cost.
The above hybrid KLT/GMM design is also applied to a robust speaker identification system. Under both additive white Gaussian noise (AWGN) and car noise environments, it is demonstrated that accuracy improvement and computational saving compared to the conventional GMM model can be achieved.
Genetic algorithm (GA) is proposed in this thesis to improve the speaker identification performance of the vector quantizer (VQ) by avoiding typical local minima incurred in the LBG process. The results indicates that this scheme is useful for our application on recognition and practice.
|
46 |
A Design of Multi-Session, Text Independent, TV-Recorded Audio-Video Database for Speaker RecognitionWang, Long-Cheng 07 September 2006 (has links)
A four-session text independent, TV-recorded audio-video database for speaker recognition is collected in this thesis. The speaker data is used to verify the applicability of a design methodology based on Mel-frequency cepstrum coefficients and Gaussian mixture model. Both single-session and multi-session problems are discussed in the thesis. Experimental results indicate that 90% correct rate can be achieved for a single-session 3000-speaker corpus while only 67% correct rate can be obtained for a two-session 800-speaker dataset. The performance of a multi-session speaker recognition system is greatly reduced due to the variability incurred in the recording environment, speakers¡¦ recording mood and other unknown factors. How to increase the system performance under multi-session conditions becomes a challenging task in the future. And the establishment of such a multi-session large-scale speaker database does indeed play an indispensable role in this task.
|
47 |
A design of text-independent medium-size speaker recognition systemZheng, Shun-De 13 September 2002 (has links)
This paper presents text-independent speaker identification results for medium-size speaker population sizes up to 400 speakers for TV speech and TIMIT database . A system based on Gaussian mixture speaker models is used for speaker identification, and experiments are conducted on the TV database and TIMIT database. The TV-Database results show medium-size population performance under TV conditions. These are believed to be the first speaker identification experiments on the complete 400 speaker TV databases and the largest text-independent speaker identification task reported to date. Identification accuracies of 94.5% on the TV databases, respectively and 98.5% on the TIMIT database .
|
48 |
A Feature Design of Multi-Language Identification SystemLin, Jun-Ching 17 July 2003 (has links)
A multi-language identification system of 10 languages: Mandarin, Japanese, Korean, Tamil, Vietnamese, English, French, German, Spanish and Farsi, is built in this thesis. The system utilizes cepstrum coefficients, delta cepstrum coefficients and linear predictive coding coefficients to extract the language features, and incorporates Gaussian mixture model and N-gram model to make the language classification. The feasibility of the system is demonstrated in this thesis.
|
49 |
Bayesian variable selection in clustering via dirichlet process mixture modelsKim, Sinae 17 September 2007 (has links)
The increased collection of high-dimensional data in various fields has raised a strong
interest in clustering algorithms and variable selection procedures. In this disserta-
tion, I propose a model-based method that addresses the two problems simultane-
ously. I use Dirichlet process mixture models to define the cluster structure and to
introduce in the model a latent binary vector to identify discriminating variables. I
update the variable selection index using a Metropolis algorithm and obtain inference
on the cluster structure via a split-merge Markov chain Monte Carlo technique. I
evaluate the method on simulated data and illustrate an application with a DNA
microarray study. I also show that the methodology can be adapted to the problem
of clustering functional high-dimensional data. There I employ wavelet thresholding
methods in order to reduce the dimension of the data and to remove noise from the
observed curves. I then apply variable selection and sample clustering methods in the
wavelet domain. Thus my methodology is wavelet-based and aims at clustering the
curves while identifying wavelet coefficients describing discriminating local features.
I exemplify the method on high-dimensional and high-frequency tidal volume traces
measured under an induced panic attack model in normal humans.
|
50 |
Voice recognition system based on intra-modal fusion and accent classificationMangayyagari, Srikanth 01 June 2007 (has links)
Speaker or voice recognition is the task of automatically recognizing people from their speech signals. This technique makes it possible to use uttered speech to verify the speaker's identity and control access to secured services. Surveillance, counter-terrorism and homeland security department can collect voice data from telephone conversation without having to access to any other biometric dataset. In this type of scenario it would be beneficial if the confidence level of authentication is high. Other applicable areas include online transactions,database access services, information services, security control for confidential information areas, and remote access to computers. Speaker recognition systems, even though they have been around for four decades, have not been widely considered as standalone systems for biometric security because of their unacceptably low performance, i.e., high false acceptance and true rejection.
This thesis focuses on the enhancement of speaker recognition through a combination of intra-modal fusion and accent modeling. Initial enhancement of speaker recognition was achieved through intra-modal hybrid fusion (HF) of likelihood scores generated by Arithmetic Harmonic Sphericity (AHS) and Hidden Markov Model (HMM) techniques. Due to the Contrastive nature of AHS and HMM, we have observed a significant performance improvement of 22% , 6% and 23% true acceptance rate (TAR) at 5% false acceptance rate (FAR), when this fusion technique was evaluated on three different datasets -- YOHO, USF multi-modal biometric and Speech Accent Archive (SAA), respectively.
Performance enhancement has been achieved on both the datasets; however performance on YOHO was comparatively higher than that on USF dataset, owing to the fact that USF dataset is a noisy outdoor dataset whereas YOHO is an indoor dataset. In order to further increase the speaker recognition rate at lower FARs, we combined accent information from an accent classification (AC) system with our earlier HF system. Also, in homeland security applications, speaker accent will play a critical role in the evaluation of biometric systems since users will be international in nature. So incorporating accent information into the speaker recognition/verification system is a key component that our study focused on. The proposed system achieved further performance improvements of 17% and 15% TAR at an FAR of 3% when evaluated on SAA and USF multi-modal biometric datasets.
The accent incorporation method and the hybrid fusion techniques discussed in this work can also be applied to any other speaker recognition systems.
|
Page generated in 0.017 seconds