Spelling suggestions: "subject:"machinery -- amonitoring."" "subject:"machinery -- 19monitoring.""
1 |
An architecture for a diagnostic/prognostic system with rough set feature selection and diagnostic decision fusion capabilitiesLee, Seungkoo 12 1900 (has links)
No description available.
|
2 |
Investigation of cage rotor variables including on-line monitoringSiyambalapitiya, Don Joseph Tilak January 1987 (has links)
No description available.
|
3 |
Computerised speed monitoring system for nylon spinningAbrahams, Leon Gary January 1996 (has links)
Thesis (MTech (Electrical Engineering))--Peninsula Technikon, Cape Town,1996 / The Southern Nylon Spinning plant, at South African Nylon
Spinners in Bellville - Cape Town - South Africa, is one
of the oldest on the site and a need arose to upgrade the
existing method used in speed monitoring in this particular
plant. This system was unable to produce alarms on speed
limits being exceeded (i.e. on under-speed or over-speed).
There was no alarm logging or historical trending. Manual
records on speed were either incomplete or non-existent.
Thus the purpose of this study was to investigate the
existing speed monitoring system and implement a suitable
computerised method of speed monitoring.
|
4 |
Detection of turn faults arising from insulation failure in the stator windings of AC machinesCash, M. Alex 08 1900 (has links)
No description available.
|
5 |
Sensor and machine condition effects in roller bearing diagnosticsBillington, Scott Alexander 12 1900 (has links)
No description available.
|
6 |
Nonlinearity detection for condition monitoring utilizing higher-order spectral analysis diagnosticsPark, Hyeonsu, 1973- 10 October 2012 (has links)
In this dissertation, we investigate the theory and application of higher-order spectral analysis techniques to condition monitoring in shipboard electrical power systems. Monitoring and early detection of faults in rotating machines, such as induction motors, are essential for both preventive maintenance and to avoid potentially severe damage. As machines degrade, they often tend to become more nonlinear. This increased nonlinearity results in the introduction of new frequencies which satisfy particular frequency selection rules; the exact selection rule depends on the order of the nonlinearity. In addition, the phases of the newly generated frequencies satisfy a similar phase selection rule. This results in a phase coherence, or phase coupling, between the “original” interacting frequencies and the “new” frequencies. This phase coupling is a true signature of nonlinearity. Since the classical auto-power spectrum contains no phase information, the phase coupling signature associated with nonlinear interactions is not available. However, various higher-order spectra (HOS) are capable of detecting such nonlinear-induced phase coupling. The efficacy of the various proposed HOS-based methodologies is investigated using real-world vibration time-series data from a faulted induction motor driving a dc generator. The fault is controlled by varying a resistor placed in one phase of the three-phase line to the induction motor. First, we propose a novel method using a bispectral change detection (BCD) for condition monitoring. Even though the bicoherence is dominant and powerful in the detection of phase coupling of nonlinearly interacting frequencies, it has some difficulties in its application to machine condition monitoring. Basically, the bicoherence may not be able to distinguish between intrinsic nonlinearities associated with healthy machines and fault-induced nonlinearities. Therefore, the ability to discriminate the fault-only nonlinearities from the intrinsic nonlinearities is very important. The proposed BCD method can suppress the intrinsic nonlinearities of a healthy machine by nulling them out and thereby identify the fault-only nonlinearities. In addition, most machines contain rotating components, and the vibration fields they generate are periodic. These periodic impulse train signals may produce artificially high bicoherence values and can lead to ambiguous indications of faults in machine condition monitoring. The proposed BCD method can remove the artificially high bicoherence values caused by periodic impulse-train signals. With these advantages, the proposed BCD method is a new and sensitive indicator for condition monitoring. Second, we propose a novel method to estimate, from a measured single time-series data record, complex coupling coefficients in order to quantify the “strength” of nonlinear frequency interactions associated with rotating machine degradation. The estimation of the coupling coefficients is based on key concepts from higher-order spectral analysis and least mean-square-error analysis. The estimated coupling coefficients embody the physics of the nonlinear interactions associated with machine degradation and provide a quantitative measure of the “strength” of the nonlinear interactions. In addition, as an auto-quantity method utilizing a single time-series data record, the proposed method adds supplemental fault signature information to conventional tools. Such knowledge has the potential to advance the state-of-the-art of machine condition monitoring. Third, we propose a bispectral power transfer analysis methodology to quantify power transfer between nonlinearly interacting frequency modes associated with machine degradation. Our proposed method enables us to identify the relative amounts of power transferred by various nonlinear interactions, and thereby identify the predominant interactions. Such knowledge provides important new signature, or feature, information for machine condition monitoring diagnostics. / text
|
7 |
Intelligent signal/image processing for fault diagnosis and prognosisWang, Peng 08 1900 (has links)
No description available.
|
8 |
Software framework for prognostic health monitoring of ocean-based power generationUnknown Date (has links)
On August 5, 2010 the U.S. Department of Energy (DOE) has designated the Center for Ocean Energy Technology (COET) at Florida Atlantic University (FAU) as a national center for ocean energy research and development of prototypes for open-ocean power generation. Maintenance on ocean-based machinery can be very costly. To avoid unnecessary maintenance it is necessary to monitor the condition of each machine in order to predict problems. This kind of prognostic health monitoring (PHM) requires a condition-based maintenance (CBM) system that supports diagnostic and prognostic analysis of large amounts of data. Research in this field led to the creation of ISO13374 and the development of a standard open-architecture for machine condition monitoring. This thesis explores an implementation of such a system for ocean-based machinery using this framework and current open-standard technologies. / by Mark Bowren. / Thesis (M.S.C.S.)--Florida Atlantic University, 2012. / Includes bibliography. / Electronic reproduction. Boca Raton, Fla., 2012. Mode of access: World Wide Web.
|
9 |
Data gateway for prognostic health monitoring of ocean-based power generationUnknown Date (has links)
On August 5, 2010 the U.S. Department of Energy (DOE) has designated the Center for Ocean Energy Technology (COET) at Florida Atlantic University (FAU) as a national center for ocean energy research and development. Their focus is the research and development of open-ocean current systems and associated infrastructure needed to development and testing prototypes. The generation of power is achieved by using a specialized electric generator with a rotor called a turbine. As with all machines, the turbines will need maintenance and replacement as they near the end of their lifecycle. This prognostic health monitoring (PHM) requires data to be collected, stored, and analyzed in order to maximize the lifespan, reduce downtime and predict when failure is eminent. This thesis explores the use of a data gateway which will separate high level software with low level hardware including sensors and actuators. The gateway will v standardize and store the data collected from various sensors with different speeds, formats, and interfaces allowing an easy and uniform transition to a database system for analysis. / by Joseph. Gundel. / Thesis (M.S.C.S.)--Florida Atlantic University, 2012. / Includes bibliography. / Electronic reproduction. Boca Raton, Fla., 2012. Mode of access: World Wide Web.
|
10 |
Intelligent online monitoring and diagnosis for metal stamping operations. / Intelligent on-line monitoring and diagnosis for metal stamping operations / CUHK electronic theses & dissertations collectionJanuary 2003 (has links)
"March 2003." / Thesis (Ph.D.)--Chinese University of Hong Kong, 2003. / Includes bibliographical references (p. 183-193). / Electronic reproduction. Hong Kong : Chinese University of Hong Kong, [2012] System requirements: Adobe Acrobat Reader. Available via World Wide Web. / Mode of access: World Wide Web. / Abstracts in English and Chinese.
|
Page generated in 0.1505 seconds