Spelling suggestions: "subject:"magnetorheological damper"" "subject:"magnetorheological hamper""
1 |
Combined Shock and Vibration Isolation Through the Self-Powered, Semi-Active Control of a Magnetorheological Damper in Parallel with an Air SpringTanner, Edward Troy 02 December 2003 (has links)
Combining shock and vibration isolation into a single isolation system package is explored through the use of an air spring in parallel with a controlled magnetorheological fluid damper. The benefits of combining shock and vibration isolation into a single package is discussed. Modeling and control issues are investigated and test and simulation results are discussed. It is shown that this hybrid isolation system provides significantly increased performance over current state-of-the-art passive systems. Also explored is the feasibility of scavenging and storing ambient shipboard vibration energy for use in powering the isolation system.
To date the literature has not adequately explored the direct design of a combined shock and vibration isolation system. As shock and vibration isolation are typically conflicting goals, the traditional approach has been to design separate shock and vibration isolation systems and operate them in parallel. This approach invariably leads to compromises in terms of the performance of both systems. Additionally, while considerable research has been performed on magnetorheological fluids and devices based on these fluids, there has been little research performed on the use of these fluids in devices that are subjected to high velocities such as the velocity seen by a ship exposed to underwater near-miss explosive events. Also missing from the literature is any research involving the scavenging and storage of ambient shipboard vibration energy. While the focus of this work is on the use of this scavenged energy to power the subject isolation system, many other uses for this energy can be envisioned.
Experimental and analytical results from this research clearly show the advantages of this hybrid isolation system. Drop tests show that inputs as great as 167 g's were reduced to 3.42 g's above mount at 1.11 inches of deflection using a Velocity Feedback controller suggested by the author. When contrasted with typical test results with similar inputs, the subject isolation system achieved reductions in above mount accelerations of 300% and reductions in mount deflections of 200% over current state-of-the-art passive shipboard isolation systems. Furthermore, simulations using a validated model of the isolation system suggest that this performance improvement can be achieved in multi-degree-of-freedom isolation systems as well. It was shown that above mount accelerations in the vertical and athwartship directions could be effectively limited to a predefined value, while achieving the absolute minimum mount defections, using an Acceleration Limiting Bang-Bang controller suggested by the author. Further experimentation suggests that the subject isolation system could be entirely self-powered from scavenged ambient shipboard vibration energy. An experiment using an energy scavenging and storage system consisting of a Piezoelectric Stack Generator and a bank of ultracapacitors showed that enough energy could be harvested to power the isolation system though several shock events. / Ph. D.
|
2 |
Large Force Range Mechanically Adjustable Dampers for Heavy Vehicle ApplicationsBurke, William Churchill Taliaferro 08 July 2010 (has links)
Semi-active dampers utilizing various working principles have been developed for a variety of vehicles. These semi-active dampers have been designed to resolve the ride and handling compromise associated with conventional passive dampers, and increase vehicle stability. This thesis briefly reviews existing semi-active damper designs, including but not limited to MR dampers, before presenting two new prototype semi-active hydraulic dampers. Both prototype dampers are designed to provide a large force range while maintaining easily controllable valve characteristics.
The first of these dampers served primarily as a proof of concept and a means of understanding the dynamics of a disc valve housed inside the main piston. The valve design is presented, along with other information concerning the fabrication of the Initial Prototype damper. Test results are presented and analyzed, and a second iteration of the valve is designed. The Final Prototype damper is a scaled up version of the initial design, with refinements made in piston geometry, internal disc profile, and dynamic seals. This large force range damper is tested and results are compared with existing MR dampers. The Final Prototype damper provides a significantly larger force range when compared with typical MR dampers. Finally, to conclude this research, the vehicle dynamics implications of the Final Prototype damper are discussed and recommendations for further study are made. / Master of Science
|
3 |
Innovative Designs for Magneto-Rheological DampersPoynor, James Conner 14 August 2001 (has links)
Magnetorheological dampers, or as they are more commonly called, MR dampers, are being developed for a wide variety of applications where controllable damping is desired. These applications include dampers for automobiles, heavy trucks, bicycles, prosthetic limbs, gun recoil systems, and possibly others.
This thesis first introduces MR technology through a discussion of MR fluid and then by giving a broad overview of MR devices that are being developed. After giving the reader an understanding of MR technology and devices, MR damper basics are presented. This section includes a discussion of MR damper types, mathematical fundamentals, and an approach to magnetic circuit design.
With the necessary background information covered, MR dampers for automotive use are then discussed. Specifically, designs for MR dampers that were built for a Mercedes ML-430 and for a Ford Expedition are presented along with their respective test results. These test results are presented and compared with the original equipment hydraulic dampers.
After discussing automotive MR dampers, designs for gun recoil applications are presented. Specifically, two different MR damper designs are discussed along with live-fire test results for the first damper.
Finally, two hybrid dampers that were based on a modified adjustable hydraulic damper are presented. These hybrid dampers, if pursued further, may develop into controllable replacements for large hydraulic dampers such as those installed on large vehicles and field Howitzers. In conclusion, recommendations are made for materials as well as for seal selection and other design aspects. / Master of Science
|
4 |
Magnetorheological Suspension Damper for Space Application / Magnetorheological Suspension Damper for Space ApplicationKubík, Michal January 2018 (has links)
Disertační se práce se zabývala vývojem magnetoreologického (MR) tlumiče odpružení pro kosmonautiku. Dle současného stavu poznání jsou důležitými parametry pro semi-aktivně řízený tlumič pro kosmonautiku hermetické oddělení pracovní kapaliny od zbytku nosiče a krátká časová odezva tlumícího elementu. Těmto požadavkům vyhovuje magnetoreologický tlumič s vlnovcovou jednotkou. Magnetický obvod MR tlumiče pro kosmonautiku byl vyroben z feritového materiálu, který umožnil výrazně snížit časovou odezvu. Hermetičnost byla zajištěna použitím vlnovcové jednotky. Konstrukce takového typu tlumiče ovšem přináší celou řadu problémů. Vyvinutý MR tlumič s feritovým magnetickým obvodem dosahoval časové odezvy 4.1 ms a dynamického rozsahu 8. Během konstrukčních prací na MR tlumiči pro kosmonautiku byly hledány nové metody pro konstrukci semi-aktivně řízeného MR tlumiče s krátkou časovou odezvou. Konkrétně se jednalo o metodu eliminace vířivých proudů v magnetickém obvodu MR tlumiče, magnetostatický a transietní magnetický model, CFD model obtokové štěrbiny, hydraulický model MR tlumiče a jejich experimentální verifikace. Tyto nové metody umožní konstrukci MR tlumiče pro kosmonautiku lehčí, s nižší časovou odezvou a vyšším dynamickým rozsahem.
|
5 |
Návrh pístní skupiny rychlého magnetoreologického tlumiče s využitím technologie selective laser melting / Design of fast magnetorheological damper piston group using selective laser melting technologyVítek, Petr January 2018 (has links)
The diploma thesis deals with the development of the magnetic circuit of Magnetoreological (MR) dampers with a short time response. To achieve a short response time, a shape approach was chosen whereby the geometry of the magnetic circuit was chosen to significantly eliminate the occurrence of eddy currents. The influence of structures on magnetic properties was first examined on a simpler toroidal core and then the optimization was subjected to the magnetic circuit of the MR damper itself. Geometry optimization was done using FEM simulations. The resulting geometry was made of pure iron using Selective Laser Melting technology (SLM). In addition, a MR damper was completed and its properties on air and with MR fluid were measured, which were then compared with previously developed rapid MR dampers. It has been found that the newly designed magnetic circuit achieves similar time responses as all other compared fast MR dampers and reaches a higher dynamic range than most of the compared variants. The proposed magnetic circuit also has a significantly reduced weight.
|
6 |
An Invertible Open-Loop Nonlinear Dynamic Temperature Dependent MR Damper ModelJumani, Sajit Satish 10 June 2010 (has links)
A Magnetorheological damper is a commonly used component in semi-active suspensions that achieves a high force capacity and better performance than a passive system, without the added expense and power draw of a fully active system, all while maintaining failsafe performance. To fully exploit the capabilities of an MR Damper, a high fidelity controller is required that is simple and easy to implement, yet does not compromise the accuracy or precision needed in many high-performance applications. There is a growing need for this level of operation, and this proposed work addresses these requirements by creating an empirically derived invertible model that enables the development of more accurate command signals by capturing the effect of temperature on a MR Damper's performance capabilities. Furthermore, this solution is specifically tailored for real-time application and does not require force feedback. Thus it requires low computation power and minimizes end-user cost by eliminating the need for additional high cost sensors such as load cells. A notable observation that resulted from the development of this proposed model was the difference in behavior between on and off states. Additionally a unique behavior was recognized with respect to the transition between high speed and low speed damping. For validation, the proposed model was compared against experimental data as well as an industry standard Spencer model; it produced excellent results in both cases with minimal error. / Master of Science
|
7 |
Adaptivní řízení magnetoreologických tlumičů / Adaptive control of magnetorheological dampersMíša, Jiří January 2020 (has links)
The topic of this master´s thesis is the design of adaptive damping algorithm for the prototype magnetorheological dampers, which are used for Formula Student vehicle. The prime output is the development and optimization of the control algorithm which included usage of the MBS software and real data from race track. Temperature compensation to supress the effect of dynamic viscosity of magnetorheological fluid due to the increase in operating temperature and testing of the vertical dynamic of the car on 4 - post test rig was realized as well. The main goal was to obtain better control of the car in transient situations and increase usability of tires via changes in damping based on actual conditions and status of the vehicle.
|
8 |
Návrh semiaktivního odpružení sedačky pro zemědělské stroje / Design of semiactive seat suspension for agricultural machinesZindulka, Martin January 2020 (has links)
The thesis deals with design of a semiactive seat suspension system for an agriculture machines and design of dynamic model of the system, which includes real parameters of a magnetorheological (MR) damper. The dynamic model is a single degree of freedom model and it is made in program Matlab. In the model, response time of the MR damper and three control algorithms are implemented (two-state Skyhook, Skyhook linear approximation damper control and Acceleration Driven Damper control). Based on the results of the simulations, the damping characteristics are defined, and the MR damper is modified to achieve fast response time. A test seat is designed to test transmission of vibrations to the driver. The simulation results provide a comparison of efficiency of the seat suspension depending on the response time and control algorithm, as well as a comparison with a passive suspension system. On the designed test seat with MR damper with a fast response time, the vibration transmission is reduced up to 25 % compared with the best passive seat suspension setup.
|
9 |
Magnetoreologický tlumič s krátkou časovou odezvou pro podvozek kolejového vozidla / Magnetorheological shock absorber with short response time for train bogieŠebesta, Karel January 2020 (has links)
The diploma thesis deals with the design of a magnetorheological damper with a short response time of the damping force for the bogie of a rail vehicle. The largest component, which slows down the response, is the eddy currents generated in the piston group of the MR damper. A rapid onset of damping force is achieved by using a shape approach in magnetic circuit design. The shape approach increases the distance that the eddy currents must travel, and therefore it helps to reduce them. The shape approach is realized by grooving the core and the shell of the MR damper. The proposed fast version of the MR damper is measured on a hydraulic pulsator and its results show a sufficient time response of the damping force. This response does not exceed 8 ms for the primary onset of the damping force. The new fast design of the MR damper combines the greatest advantages of the technology and enables to meet new requirements for damping elements in the rolling stock chassis.
|
10 |
System identification and control of smart structures: PANFIS modeling method and dissipativity analysis of LQR controllersMohammadzadeh, Soroush 30 May 2013 (has links)
"Maintaining an efficient and reliable infrastructure requires continuous monitoring and control. In order to accomplish these tasks, algorithms are needed to process large sets of data and for modeling based on these processed data sets. For this reason, computationally efficient and accurate modeling algorithms along with data compression techniques and optimal yet practical control methods are in demand. These tools can help model structures and improve their performance. In this thesis, these two aspects are addressed separately. A principal component analysis based adaptive neuro-fuzzy inference system is proposed for fast and accurate modeling of time-dependent behavior of a structure integrated with a smart damper. Since a smart damper can only dissipate energy from structures, a challenge is to evaluate the dissipativity of optimal control methods for smart dampers to decide if the optimal controller can be realized using the smart damper. Therefore, a generalized deterministic definition for dissipativity is proposed and a commonly used controller, LQR is proved to be dissipative. Examples are provided to illustrate the effectiveness of the proposed modeling algorithm and evaluating the dissipativity of LQR control method. These examples illustrate the effectiveness of the proposed modeling algorithm and dissipativity of LQR controller."
|
Page generated in 0.0545 seconds