Approved for public release; distribution is unlimited / During the month of July 1987 an acoustical experiment was conducted by the United States Naval Research Laboratory (NRL) in the East Greenland Sea Marginal Ice Zone (MIZ) . Ambient noise "hot spots" or concentrated areas of relatively high noise levels were found along the ice edge using a towed array. Ambient noise levels were obtained on 27 and 28 July using AN/SSQ-57A and AN/SSQ-57XN5 calibrated sonobuoys . The temperature structure of the area was determined using XBT (ship) and AXBT (P3C aircraft) buoys placed inside and outside the ice edge. The ice edge was determined from coincident satellite photos, 90 GHz microwave imagery and P3 radar ice edge maps. Weather data (sea state and wind speed and direction) were recorded on the ship. The data seem to indicate a correlation between the high ambient noise levels of the hot spots and the presence of a large topographically controlled mesoscale eddy located at the southeastern extent of the MIZ. / http://archive.org/details/spatialvariabili00bigg / Lieutenant, United States Navy

La banquise, qui couvre de larges étendues de l’océan près des pôles, est une composante majeure du climat. Le réchauffement de la planète entraîne sa fonte massive, en particulier en Arctique.Là où l’extension de la banquise diminue, l’augmentation du fetch est associée à une élévation de la hauteur des vagues, laissant penser que les effets liés aux interactions vagues-glace pourraient s’accroître dans le futur. L’évolution rapide de la banquise associée à l’intensification des activités humaines dans les régions polaires pressent à améliorer notre connaissance de ces interactions.La banquise atténue les vagues. Elles peuvent néanmoins s’y propager et briser la glace sur de longues distances. L’atténuation dépend des propriétés de la glace comme l’épaisseur, la taille des plaques... Les plaques de glace une fois cassées sont plus susceptibles de dériver et de fondre. En outre, lors de l’atténuation, les plaques sont poussées dans la direction de propagation des vagues.Une représentation simple de la banquise dans un modèle de vagues intégrant une distribution de la taille des plaques nous a permis de montrer l’importance des mécanismes dissipatifs dans l’atténuation, notamment ceux induits par la flexion de la glace.Après avoir été validé, ce modèle a été couplé à un modèle de glace. La taille des plaques est échangée et utilisée dans le calcul de la fonte latérale. La force exercée par les vagues sur la banquise est également envoyée depuis le modèle de vagues. En été, cette force compacte la glace et tend à diminuer la fonte, augmentant significativement la température et la salinité des eaux de surface au bord de la banquise. / Sea ice, which covers most of the ocean near the poles, is a key component of the climate system. Global warming is driving its massive melting, especially in the Arctic. Where sea ice cover decreases, fetch increases leading to more energetic sea states. This means potentially enhanced wavesice interactions effects in the future. The quick evolution of sea ice extent and volume combined with the intensification of human activities in polar regions urge us to improve our understanding of waves-ice interactions.Sea ice attenuates waves. They can however propagate through it and break it far into the ice cover. Attenuation depends on ice properties such as floe size, thickness, etc. Once broken, resulting floes are more likely to drift and melt. In addition, wave attenuation yields a force which pushes the floes in the direction of wave propagation.A simplified representation of sea ice, including a floe size distribution, has been incorporated in a wave model.It allows us to show the important contribution of dissipative mechanisms in the wave attenuation, especially those induced by the bending of the ice plates. After validation, the modified wave model is coupled to an ice model. The floe size distribution is exchanged in the coupled framework and used in ice lateral melt computation. The force exerted by the waves on the ice floes is sent from the wave model and is shown to compact sea ice in summer. This reduces the melting and significantly increases the temperature and salinity in the surface ocean close to the ice edge.

This thesis provides insight into techniques for the detection and classification of various marginal ice zone roughnesses in the southern Beaufort Sea using in situ and satellite-based microwave remote sensing. A proposed model of surface roughness shows the dependence of circular coherence, a discriminator of roughness, on the roughness and dielectrics. A relationship between ice slopes in azimuth and range direction is derived. Microwave brightness temperature of open water is significantly correlated with wave height but not with the wind speed, having the strongest correlations for the H-polarization at both 37 and 89 GHz. A modified formula for the relationship between non-dimensional form of energy and wave age at wind speeds 0−10 m/s is obtained. The brightness temperature (April−June) of sea ice at H-polarization of 89 GHz is found to decrease with increasing roughness, and is attributed to the dominant contributions from rapidly varying thermodynamic properties of snow-covered sea ice.

Sea ice in the Antarctic Marginal Ice Zone (MIZ) plays a pivotal role in regulating heat and energy exchange between oceanic and atmospheric systems, which drive global climate. Current understanding of Southern Ocean sea ice dynamics is poor with temporal and spatial gaps in critical seasonal data-sets. The lack of in situ environmental and wave data from the MIZ in the Antarctic region drove the development of UCT's first generation of in situ ice-tethered measurement platform as part of a larger UCT and NRF SANAP project on realistic modelling of the Marginal Ice Zone in the changing Southern Ocean (MISO). This thesis focuses on the firmware development for the device and the design process taken to obtain key measurements for understanding sea ice dynamics and increasing sensing capabilities in the Southern Ocean. The buoy was required to survive the Antarctic climate and contained a global positioning system, temperature sensor, digital barometer and inertial measurement unit to measure waves-in-ice. Power was supplied to the device by a power supply unit consisting of commercial-grade batteries in series with a temperature-resistant low dropout regulator, and a power sensor to monitor the module. A satellite modem transmitted data through the Iridium satellite network. Finally, Flash chips provided permanent data storage. Firmware and peripheral driver files were written in C for an STMicroelectronics STM32L4 Arm-based microcontroller. To optimise the firmware for low power consumption, inactive sensors were placed in power-saving mode and the processor was put to sleep during periods of no sampling activity. The first device deployment took place during the SCALE winter expedition in July 2019. Two devices were deployed on ice floes to test their performance in remote conditions. However, due to mechanical and power errors, the devices failed shortly after deployment. A third device was placed on the deck of SA Aghulas II during the expedition and successfully survived for one week while continuously transmitting GPS coordinates and ambient temperature. The second generation featured subsequent improvements to the mechanical robustness and sensing capabilities of the device. However, due to the 2020 COVID-19 pandemic, subsequent Antarctic expeditions were cancelled resulting in the final platform evaluation taking place on land. The device demonstrates a proof of concept for a low-cost, ice-tethered autonomous sensing device. However, additional improvements are required to overcome severe bandwidth and power constraints.