Spelling suggestions: "subject:"aparine turbines -- amathematical models"" "subject:"aparine turbines -- dmathematical models""
11 |
Reliability-based fatigue design of marine current turbine rotor bladesUnknown Date (has links)
by Shaun Hurley. / Thesis (M.S.C.S.)--Florida Atlantic University, 2011. / Includes bibliography. / Electronic reproduction. Boca Raton, Fla., 2011. Mode of access: World Wide Web. / The study presents a reliability-based fatigue life prediction model for the ocean current turbine rotor blades. The numerically simulated bending moment ranges based on the measured current velocities off the Southeast coast line of Florida over a one month period are used to reflect the short-term distribution of the bending moment ranges for an idealized marine current turbine rotor blade. The 2-parameter Weibull distribution is used to fit the short-term distribution and then used to obtain the long-term distribution over the design life. The long-term distribution is then used to determine the number of cycles for any given bending moment range. The published laboratory test data in the form of an ε-N curve is used in conjunction with the long-term distribution of the bending moment ranges in the prediction of the fatigue failure of the rotor blade using Miner's rule. The first-order reliability method is used in order to determine the reliability index for a given section modulus over a given design life. The results of reliability analysis are then used to calibrate the partial safety factors for load and resistance.
|
12 |
Vibration analysis for ocean turbine reliability modelsUnknown Date (has links)
Submerged turbines which harvest energy from ocean currents are an important potential energy resource, but their harsh and remote environment demands an automated system for machine condition monitoring and prognostic health monitoring (MCM/PHM). For building MCM/PHM models, vibration sensor data is among the most useful (because it can show abnormal behavior which has yet to cause damage) and the most challenging (because due to its waveform nature, frequency bands must be extracted from the signal). To perform the necessary analysis of the vibration signals, which may arrive rapidly in the form of data streams, we develop three new wavelet-based transforms (the Streaming Wavelet Transform, Short-Time Wavelet Packet Decomposition, and Streaming Wavelet Packet Decomposition) and propose modifications to the existing Short-TIme Wavelet Transform. ... The proposed algorithms also create and select frequency-band features which focus on the areas of the signal most important to MCM/PHM, producing only the information necessary for building models (or removing all unnecessary information) so models can run on less powerful hardware. Finally, we demonstrate models which can work in multiple environmental conditions. ... Our results show that many of the transforms give similar results in terms of performance, but their different properties as to time complexity, ability to operate in a fully streaming fashion, and number of generated features may make some more appropriate than others in particular applications, such as when streaming data or hardware limitations are extremely important (e.g., ocean turbine MCM/PHM). / by Randall David Wald. / Thesis (Ph.D.)--Florida Atlantic University, 2012. / Includes bibliography. / Mode of access: World Wide Web. / System requirements: Adobe Reader.
|
13 |
Mining and fusing data for ocean turbine condition monitoringUnknown Date (has links)
An ocean turbine extarcts the kinetic energy from ocean currents to generate electricity. Machine Condition Monitoring (MCM) / Prognostic Health Monitoring (PHM) systems allow for self-checking and automated fault detection, and are integral in the construction of a highly reliable ocean turbine. MCM/PHM systems enable real time health assessment, prognostics and advisory generation by interpreting data from sensors installed on the machine being monitored. To effectively utilize sensor readings for determining the health of individual components, macro-components and the overall system, these measurements must somehow be combined or integrated to form a holistic picture. The process used to perform this combination is called data fusion. Data mining and machine learning techniques allow for the analysis of these sensor signals, any maintenance history and other available information (like expert knowledge) to automate decision making and other such processes within MCM/PHM systems. ... This dissertation proposes an MCM/PHM software architecture employing those techniques which were determined from the experiments to be ideal for this application. Our work also offers a data fusion framework applicable to ocean machinery MCM/PHM. Finally, it presents a software tool for monitoring ocean turbines and other submerged vessels, implemented according to industry standards. / by Janell A. Duhaney. / Thesis (Ph.D.)--Florida Atlantic University, 2012. / Includes bibliography. / Mode of access: World Wide Web. / System requirements: Adobe Reader.
|
14 |
Design and analysis of an ocean current turbine performance assessment systemUnknown Date (has links)
This thesis proposes a sensor approach for quantifying the hydrodynamic performance of Ocean Current Turbines (OCT), and investigates the influence of sensor-specific noise and sampling rates on calculated turbine performance. Numerical models of the selected sensors are developed, and then utilized to add stochastic measurement error to numerically-generated, non-stochastic OCT data. Numerically-generated current velocity and turbine performance measurements are used to quantify the relative influence of sensor-specific error and sampling limitations on sensor measurements and calculated OCT performance results. The study shows that the addition of sensor error alters the variance and mean of OCT performance metric data by roughly 7.1% and 0.24%, respectively, for four evaluated operating conditions. It is shown that sensor error results in a mean, maximum and minimum performance metric to Signal to Noise Ration (SNR) of 48.6% and 6.2%, respectively. / by Matthew T. Young. / Thesis (M.S.C.S.)--Florida Atlantic University, 2012. / Includes bibliography. / Mode of access: World Wide Web. / System requirements: Adobe Reader.
|
15 |
Dissipation and eddy mixing associated with flow past an underwater turbineUnknown Date (has links)
The objective of this thesis is to analyze the flow past an ocean current turbine using a finite volume Navier-Stokes CFD solver. A full 3-D RANS approach in a moving reference frame is used to model the flow. By employing periodic boundary conditions, one-third of the flow-field is analyzed and the output is replicated to other sectors. Following validation of the computation with an experimental study, the flow fields and particle paths for the case of uniform and sheared incoming flows past a generic turbine with various blade pitch angles are evaluated and analyzed. Flow field and wake expansion are visualized. Eddy viscosity effects and its dependence on flow field conditions are investigated. / by Zaqie Reza. / Thesis (M.S.C.S.)--Florida Atlantic University, 2010. / Includes bibliography. / Electronic reproduction. Boca Raton, Fla., 2010. Mode of access: World Wide Web.
|
16 |
Mathematical modeling of wave-current interactions in marine current turbinesUnknown Date (has links)
The concept of marine current turbines was developed by Peter Fraenkel in the early 1970s. Ever since Fraenkel's efforts to modify and test the technology, several worldwide agencies have been exploiting the technology to retrofit the marine current turbine to their particular application. The marine current turbine has evolved from generating a few kilowatts to a few gigawatts. The present study focuses on a megawatt sized turbine to be located offshore the coast of Ft. Lauderdale, Florida. The turbine is to be placed in a similar location as a 20 kW test turbine developed by the Southeast National Marine Renewable Energy Center (SNMREC) at Florida Atlantic University, Dania Beach, FL. Data obtained from the SNMREC is used in the mathematical model. ANSYS FLUENT is chosen as the CFD software to perform wave-current interaction simulation for the present study. The turbine is modeled in SolidWorks, then meshed in ANSYS ICEM CFD, then run in FLUENT. The results obtained are compared to published work by scholarly articles from Fraenkel, Barltrop and many other well known marine energy researchers. The effects of wave height on the turbine operation are analyzed and the results are presented in the form of plots for tip speed ratio and current velocity. / by Amit J. SIngh. / Thesis (M.S.C.S.)--Florida Atlantic University, 2012. / Includes bibliography. / Electronic reproduction. Boca Raton, Fla., 2012. Mode of access: World Wide Web.
|
17 |
Hydrodynamic analysis of ocean current turbines using vortex lattice methodUnknown Date (has links)
The main objective of the thesis is to carry out a rigorous hydrodynamic analysis of ocean current turbines and determine power for a range of flow and geometric parameters. For the purpose, a computational tool based on the vortex lattice method (VLM) is developed. Velocity of the flow on the turbine blades, in relation to the freestream velocity, is determined through induction factors. The geometry of trailing vortices is taken to be helicoidal. The VLM code is validated by comparing its results with other theoretical and experimental data corresponding to flows about finite-aspect ratio foils, swept wings and a marine current turbine. The validated code is then used to study the performance of the prototype gulfstream turbine for a range of parameters. Power and thrust coefficients are calculated for a range of tip speed ratios and pitch angles. Of all the cases studied, the one corresponding to tip speed ratio of 8 and uniform pitch angle 20 produced the maximum power of 41.3 [kW] in a current of 1.73 [m/s]. The corresponding power coefficient is 0.45 which is slightly less than the Betz limit power coefficient of 0.5926. The VLM computational tool developed for the research is found to be quite efficient in that it takes only a fraction of a minute on a regular laptop PC to complete a run. The tool can therefore be efficiently used or integrated into software for design optimization. / by Aneesh Goly. / Thesis (M.S.C.S.)--Florida Atlantic University, 2010. / Includes bibliography. / Electronic reproduction. Boca Raton, Fla., 2010. Mode of access: World Wide Web.
|
18 |
Finite Element Modeling and Fatigue Analysis of Composite Turbine Blades under Random Ocean Current and TurbulenceUnknown Date (has links)
Several modifications have been implemented to numerical simulation codes based on
blade element momentum theory (BEMT), for application to the design of ocean current
turbine (OCT) blades. The modifications were applied in terms of section modulus and
include adjustments due to core inclusion, buoyancy, and added mass. Hydrodynamic loads
and mode shapes were calculated using the modified BEMT based analysis tools. A 3D
model of the blade was developed using SolidWorks. The model was integrated with
ANSYS and several loading scenarios, calculated from the modified simulation tools, were
applied. A complete stress and failure analysis was then performed. Additionally, the
rainflow counting method was used on ocean current velocity data to determine the loading
histogram for fatigue analysis. A constant life diagram and cumulative fatigue damage
model were used to predict the OCT blade life. Due to a critical area of fatigue failure being
found in the blade adhesive joint, a statistical analysis was performed on experimental
adhesive joint data. / Includes bibliography. / Thesis (M.S.)--Florida Atlantic University, 2016. / FAU Electronic Theses and Dissertations Collection
|
19 |
Fatigue modeling of composite ocean current turbine bladeUnknown Date (has links)
The success of harnessing energy from ocean current will require a reliable structural design of turbine blade that is used for energy extraction. In this study we are particularly focusing on the fatigue life of a 3m length ocean current turbine blade. The blade consists of sandwich construction having polymeric foam as core, and carbon/epoxy as face sheet. Repetitive loads (Fatigue) on the blade have been formulated from the randomness of the ocean current associated with turbulence and also from velocity shear. These varying forces will cause a cyclic variation of bending and shear stresses subjecting to the blade to fatigue. Rainflow Counting algorithm has been used to count the number of cycles within a specific mean and amplitude that will act on the blade from random loading data. Finite Element code ANSYS has been used to develop an S-N diagram with a frequency of 1 Hz and loading ratio 0.1 Number of specific load cycles from Rainflow Counting in conjunction with S-N diagram from ANSYS has been utilized to calculate fatigue damage up to 30 years by Palmgren-Miner's linear hypothesis. / by Mohammad Wasim Akram. / Thesis (M.S.C.S.)--Florida Atlantic University, 2010. / Includes bibliography. / Electronic reproduction. Boca Raton, Fla., 2010. Mode of access: World Wide Web.
|
20 |
Numerical Simulation of an Ocean Current Turbine Operating in a Wake FieldUnknown Date (has links)
An Ocean Current Turbine (OCT) numerical simulation for creating, testing and
tuning flight and power takeoff controllers, as well as for farm layout optimization is
presented. This simulation utilizes a novel approach for analytically describing oceanic
turbulence. This approach has been integrated into a previously developed turbine
simulation that uses unsteady Blade Element Momentum theory. Using this, the
dynamical response and power production of a single OCT operating in ambient
turbulence is quantified.
An approach for integrating wake effects into this single device numerical
simulation is presented for predicting OCT performance within a farm. To accomplish
this, far wake characteristics behind a turbine are numerically described using analytic
expressions derived from wind turbine wake models. These expressions are tuned to
match OCT wake characteristics calculated from CFD analyses and experimental data. Turbine wake is characterized in terms of increased turbulence intensities and decreased
mean wake velocities. These parameters are calculated based on the performance of the
upstream OCT and integrated into the environmental models used by downstream OCT.
Simulation results are presented that quantify the effects of wakes on downstream turbine
performance over a wide range of relative downstream and cross stream locations for
both moored and bottom mounted turbine systems. This is done to enable the
development and testing of flight and power takeoff controllers designed for maximizing
energy production and reduce turbine loadings. / Includes bibliography. / Dissertation (Ph.D.)--Florida Atlantic University, 2016. / FAU Electronic Theses and Dissertations Collection
|
Page generated in 0.1167 seconds