The subjects of the thesis are chosen parts of the building technological project for the preparation and realization of the terraced family houses in Svitavy. The solution includes The study of the main technological stages realization, Time schedule and financial plan, The project of the site facilities including design of the main hoisting mechanism. The realization of ceiling construction is described in detail by The technological prescription. The solution also includes a proposal of local and utility roads repairs on the streets Gorkého and U Studeného potoka.

This Master´s thesis is focused on block of flats project documentation. The documentation is worked for building construction. Emphasis is placed on structural, space, fire safety, thermal and acoustic requirements. Masonry building is secluded and has four floors, without cellared, with a gabled roof. The building is designed with eight flats and one of these flats is designed for persons with reduced mobility.

The master‘s thesis „Mountain chalet“ is elaborated as a project documentation containing all the properties in compliance with valid regulations. The aim of the thesis is the proposal of new objects on the site of the former chalet called Peterbaude in the city Špindlerův Mlýn, on the building estate numer 85/1. The original chalet was on the list of cultural monuments. The architectural solution for the renewall of chalet is assigned by requirements of NPÚ. The documentation of two new objects and reconstruction of existing object are aleborated in the master‘s thesis. The work also comprises thermal technical assessment, dispositional design and specialization work.

This Master´s thesis is focused on block of flats project documentation, claims for fire safety and thermal and acoustic properties of structures. The brick building is detached and has three floors without basement. These floors are connected by a lift. The block of flats is based on the footings, external walls are insulated by a contact thermal insulation system. The tent roof is consists of truss in two levels. The building is designed for nine flats and one of these flats is wheelchair accessible. Truss design is also a part of the project.

This thesis deals with proposal detached three-storey office building, which consists of the brick section and monolithic reinforced concrete frame. The building is covered with a flat roof. The design focus is on the overall consistency between spatial, structural, static, fire safety, acoustic and thermal technical requirements. Documentation is prepared for the building construction. The graphical part of documentation has been processed in the AUTOCAD software.

The Master’s thesis solves a design of the modern War Museum of the Považie Region. The building is situated in the centre of Považská Bystrica town. It is the representative four-storey building with flat single roofs, intended for general public use. The object is divided into two main parts. There are museum part and administration part. The museum part is a monolithic reinforced-concrete skeleton with light single facade. The administration part is a masonry construction system and it will serves especially for employees. The thesis containes a project of executive documentation including construction details and other assessments.

Diploma thesis solves the creating of layout study and creation of documentation for the realization new fire station. In the object is contemplated with placement of regional fire brigade unit, category JPO I and volunteer firefighter unit of city together, category JPO III/1. Fire station category will be considered as P1. The object consists of two structurally and functionally different parts. The first part is made of ceramic masonry with external thermal insulation composite system. Here are located administrative and operational premises. This section has two floors. Second part is solved as single-storey skeletal system made of reinforced concrete, roofed by prestressed concrete trusses. This part contains technical facilities and a garage. The cladding of the skeletal part of building is designed by using sandwich facade panels. Object has dissected ground plan, maximum dimensions are 54,80x22,20 m. Building has no basement and is roofed by flat roofs only. Object is located in peripheral locality of the city Jaroměř. Surrounding terrain is flat. Solved area contains a few related objects.

The thesis dealt with the reconstruction of the existing farm buildings. After a complete reconstruction of the object it will serve as a guest house with training center. The equipment includes the restaurant with its own kitchen facilities and building will be completed by the wellness center, which will be located in the new part of development. Object of wellness center will probably be completely resolved in the construction phase B. The property is located in the village Býkovice, Býkovice (616524 ), house No. 30, No. 82, land parcel numbers: 120/1 , 120/2 , 121/1. That object will consist of three floors, one floor is partly underground, further aboveground floor which will be directly accessible from the northern part and attic. The total built-up area will be approximately 526 m. Ridge height is 5,250 m and 3,840 m. The building is based on the existing foundations and the new wellness center is based on the footings of plain concrete C16/20. The base concrete slabs will be made new in the entire building, reinforced with KARI networks 150x150x6. Peripheral bearing and interior bearing walls remain largely preserved (masonry, brick, stone and mixed). New structures will be designed in Porotherm and added with light rails Fermacell (SDK). The steel-concrete ceiling and ceiling in the new part will be made of Porotherm. The staircase is made of steel, staircase. The roof is gabled house (main building) and desk (east wing), above the training center is also gabled roof. All roofs are fitted with metal roofing.

The project is handled by complete documentation , brand new detached house with mountain restaurants at the level of documentation for construction . The building is designed in the village Olšany district. Šumperk on plot No. 261/1 , 261/5 , 261/9 and 261 of / 12. Built up area is 1465 square meters , of which the construction of the house itself has a 445.2 square meters . The basement and ground floor is used for restaurants, restaurant facilities and staff , reception and social facilities for guests . The second floor and the attic is designed to accommodate guests. The pension has a capacity of 20 people , of which there are six double rooms and two suites on the top floor , each for four people. The operation of the pension are a total of four employees. The restaurant , with a capacity of 102 people , the total number of employees 8 . The building is designed as two rectangles perpendicular to each other forming the letter T. The building is based on the footings of plain concrete foundation slab drag over the basics with reinforcing karisítí . Walling system from Heluz , partitions from the system Knauf, reinforced concrete ceilings . Outdoor perimeter walls is insulated with polystyrene foam . The roof is gabled and three graduated height of the ridge , where the highest elevation is the main part +11.370 m , roof pitch of 35 °. The building is connected to the local road and the available utilities. Proposal for hotel and restaurant is processed in accordance with applicable standards and regulations for the country.

This master’s thesis deals with the design documentation multifunction sports hall. The building is situated in the region in the Vysočina village Humpolec, cadastral district Humpolec. The building is designed as a prefabricated skeleton, where the vertical load-bearing structures are designed from the prefabricated skeleton of PREFA BRNO and filling and partition walls of the structural system POROTHERM and BTB fittings. Horizontal structures are formed by the supporting elements prefabricated skeleton system of PREFA BRNO and ceiling panels SPIROLL. The main single-storey multifunction hall is roofed with wooden trusses of curved from glued laminated timber and purlins carrying roof deck. The other part of the building is covered with flat single-ply roofs. The building is divided into a main single-storey multifunction sports hall and an outbuilding with facilities for athletes and spectators about two floors above ground and a third technical floor. The building is solved as barrier-free.