Early work in electrowetting on dielectric (EWOD) devices has demonstrated their great potential in microfluidics; however, further work is needed to integrate EWOD technology into a system deployable for point-of-care (POC) diagnostics. This research is aimed at providing enabling technologies that foster a development path of EWOD devices using a process similar to the development of application-specific integrated circuits (ASICs). A field-programmable lab-on-a-chip (FPLOC), which allows designers to electrically program the prefabricated chip into EWOD applications, was fabricated and demonstrated based on novel microelectrode dot array (MEDA) architecture. The MEDA architecture proposes a standard EWOD component called “microelectrode cell”, which can be dynamically configured into microfluidic components to perform microfluidic operations of the biochip. The FPLOC is the first EWOD biochip fabricated by the standard low-voltage complementary metal-oxide-semiconductor (CMOS) technology, which allows smooth on-chip integration of microfluidics and microelectronics. A total of 900 droplet detection electrical circuits were integrated into the chip and a real-time droplet location map could show shapes and locations of all droplets on the chip. The daisy-chained control structure of the MEDA architecture allowed individual control of 900 microelectrodes by only using three control pads. This control structure was also leveraged to add the built-in self-test (BIST), which was proven to be very useful in diagnosing the chip, of the FPLOC. The FPLOC successfully demonstrated seamless hierarchical field-programmability. Compared to conventional bottom-up and full-custom design approaches, the FPLOC brings microfluidic technology closer to POC diagnostics by providing biochip designers with CAD support at a level similar to that of the semiconductor industry, without the time-consuming and costly process of hardware design, testing, and maintenance.

Multimedia retrieval systems are very important today with millions of content creators all over the world generating huge multimedia archives. Recent developments allows for content based image and video retrieval. These methods are often quite slow, especially if applied on a library of millions of media items. In this research a novel image retrieval method is proposed, which utilizes spatial metadata on images. By finding clusters of images based on their geographic location, the spatial metadata, and combining this information with existing content- based image retrieval algorithms, the proposed method enables efficient presentation of high quality image retrieval results to system users. Clustering methods considered include Vector Quantization, Vector Quantization LBG and DBSCAN. Clustering was performed on three different similarity measures; spatial metadata, histogram similarity or texture similarity. For histogram similarity there are many different distance metrics to use when comparing histograms. Euclidean, Quadratic Form and Earth Mover’s Distance was studied. As well as three different color spaces; RGB, HSV and CIE Lab.

Conidiation is a common and critical asexual reproductive mode in fungi. The ascomycetes, the largest group in the kingdom Fungi undergo conidiation. The wide array of morphological difference in a conidiophore and conidial size, shape, and cellular organization demonstrates the importance of evolution in driving the morphological and functional diversity. An important unanswered question is how these conidiation processes evolve. We hypothesized that a conidiation regulatory pathway was present in the ancestral species, and became specialized in the extant species to lead to morphological and functional diversity. To address this hypothesis we assessed the conserved function of conidiation regulators in two distantly related ascomycetes, Aspergillus nidulans and Neurospora crassa. Using sequence similarity analysis, N. crassa orthologs were characterized to seven main conidiation regulatory genes in A. nidulans (fluG, flbC, flbD, abaA, wetA, medA, and stuA). Expression of the N. crassa orthologs complemented defective conidiation in the A. nidulans fluG, flbD, wetA, medA, and stuA mutants. In contrast, abaA and flbC and the N. crassa orthologs did not share conserved biochemical function. Taken in context of other recent studies of conidiation regulators, there are four distinct evolutionary patterns: (i) Non-homologous genes with analogous roles in conidiation (‘brlA’ and ‘fl’), (ii) Orthologs with retained biochemical function that lack analogous role in conidiation (‘fluG’, ‘flbD’, and ‘wetA’), (iii) Orthologs with retained biochemical function and analogous roles in conidiation (‘medA’ and ‘stuA’), and (iv) Orthologs with biochemical function not conserved but with analogous roles in conidiation (‘abaA’ and ‘flbC’). These studies set the stage for long-term studies of how evolution proceeded during the evolution of conidiation at different levels of phylogenetic diversity. An understanding of how evolutionary mechanisms shape the dynamics of developmental pathways will be significant for our understanding of fungal evolution of other novel adaptations such as pathogenesis.

The aim of the study is to analyse the learning process of the Dorze weaving in Ethiopia and its implications on Education for Sustainable Development, ESD. My two main questions are: 1. How do the Dorze understand their learning process in weaving? 2. What conclusions concerning education for sustainable development applied on textile handicraft can be drawn from the findings of my case study?   In order to answer these questions I have made a field study on the Dorze (the weavers) in Addis Ababa in Ethiopia for 10 weeks. The study has a socio-cultural and narrative approach and the method used are interviews, observations and review of documents. The result is presented in a “metastory” where I retell the stories and introduce the results of the study and that gives answers to question 1. UNESCO’s recommendations on ESD are used to analyse the findings and give the answer to question 2. The result shows that the learning process depends on the environment with its people, who have gathered knowledge of raw material and techniques for generations but the latter also needs to develop to meet new challenges. “Shiro Meda” is the centre of learning. To grow up in “Shiro Meda” it becomes natural to work with textile production, accept a special lifestyle with clear gender differences and a hierarchical structure. The educational model of spinning and twisting are “learning by doing”, whereas young boys start practising weaving under the leadership of an older teacher step by step.   From an ESD perspective the Dorze education is holistic, practical, individualized, and contains some problem solving even if the students are not participating in decisions on how they learn. The education is highly integrated in the daily life of the weaving community and is also relevant to the surrounding local community. Moreover the education transfers a historical legacy of cultural continuity, and has shown itself to be dynamic and adaptable to change. A weakness in this traditional knowledge system is the low profit the weavers are making and the set hierarchical and gender rules which need to be developed in order to be sustainable for future challenges. The final discussion highlights the relevance of my findings for a Swedish learning context. / 2010ht4661

Le grand élargissement de 2004 et la perspective d’une Europe élargie ont amené l’Union européenne (UE) à imaginer un cadre contractuel d’action homogène pour les voisins de l’Est et du Sud dénommée la politique européenne de voisinage (PEV). L’objectif de la PEV est d’éviter l’émergence de nouvelles lignes de division entre l'UE élargie et ses nouveaux voisins, mais également d’encourager la stabilité politique, la sécurité et la prospérité économique dans son voisinage. Il s'agit d'une stratégie incitative fondée sur une plus grande différenciation visant à encourager les réformes politiques et économiques internes. Dans le cadre de la PEV, l’UE propose au Maroc, à travers le statut avancé (SA), une relation privilégiée à mi-chemin entre association et adhésion basée sur l’acquis du Processus de Barcelone (PB). Les transformations des relations euromarocaines après la PEV ont permis l’émergence progressive d’une nouvelle forme relationnelle avec un impact positif sur la dimension bilatérale du partenariat euro-méditerranéen (PEM). Entre complémentarité et substitution, c’est la question de l’articulation entre les deux processus qui est au centre de notre étude. Outre cette problématique, le SA qui incarne la PEV suscite des incertitudes quant à sa finalité. Ce partenariat privilégié a pour finalité de mettre le Maroc dans une situation comparable à celle des États candidats à l’adhésion sans perspective d'adhésion. Dans un contexte international en pleine mutation et face à l’émergence d’autres puissances en Méditerranée, l’UE devrait repenser sa PEV, identifier un projet clair et cohérent visant à structurer les relations euro-méditerranéennes de demain. / The great 2004 enlargement and the prospect of an enlarged Europe led the European Union (EU) to imagine a uniform contractual framework for action for the neighboring Eastern and Southern named the European Neighbourhood Policy (ENP). The objective of the ENP is to avoid the emergence of new dividing lines between the enlarged EU and its new neighbors, but also to encourage political stability, security and economic prosperity inits neighborhood. It is an incentive strategy based on greater differentiation to encourage internal political and economic reforms. Under the ENP, the EU proposes to Morocco, through the Advanced Status (AS), a privileged relationship midway between association and membership based on the acquis of the Barcelona Process (BP). The transformation of Euro-Moroccan relations after the ENP allowed for the gradual emergence of a novel relational framework with a positive impact on the bilateral dimension of the Euro-Mediterranean Partnership (EMP). Between complementarity and substitution, the question of the relationship between the two processes is central in our study. In addition to this addressed question, the AS that embodies the ENP, creates uncertainty to its purpose. This special partnership aims at putting Morocco in a situation such that of the States applying for accession without membership prospects. In an international context, changing with the emergence of other powers in the Mediterranean, the EU should rethink its ENP, identify a clear and coherent plan to structure the Euro-Mediterranean relations in the future.

<p>Insekticidi novije generacije, neonikotinoidi, odlikuju se specifičnim načinom &nbsp;delovanja na&nbsp;nervni sistem insekata. Radi dobijanja &scaron;to brže i kvalitetnije informacije o izloženosti životne sredine&nbsp;ovim insekticidima i količinama njihovih ostataka u hrani potrebno je raspolagati odgovarajućim&nbsp;instrumentalnim metodama za njihovo određivanje. Razvijene su i optimizovane analitičke metode&nbsp;zasnovane na tečnoj hromatografiji za određivanje sedam odabranih neonikotinoida (dinotefurana,&nbsp;nitenpirama, tiametoksama, klotianidina, imidakloprida, acetamiprida &nbsp;i tiakloprida) u medu i likeru od&nbsp;meda. Ispitivana je mogućnost određivanja klotianidina pomoću tečne hromatografije visoke efikasnosti&nbsp;sa detektrorom od niza dioda (HPLC-DAD) primenom kombinacije tečno-tečne i ekstrakcije na čvrstoj&nbsp;fazi iz uzoraka meda. Na osnovu preliminarnih rezultata može se zaključiti da kori&scaron;ćenje &nbsp;faznih-čvrsto&nbsp;kolona u kombinaciji sa tečno-tečnom ekstrakcijom dihlormetanom rezultira prihvatljivim prinosom&nbsp;klotianidina u uzorcima meda pri koncentraciji od oko 0,5 &micro;g g^-1&nbsp;klotianidina. Radi dobijanja većih&nbsp;prinosa odabrana je disperzna tečno-tečna mikroekstrakcija (DLLME) kao tehnika pripreme uzoraka&nbsp;meda. Testirana je upotreba acetonitrila kao disperznog sredstva. Pored hloroforma, kori&scaron;ćen je i&nbsp;dihlormetan kao drugo ekstrakciono sredstvo, kako bi se &nbsp;uporedila efikasnost ekstrakcije. Zabeleženi su&nbsp;prinosi klotianidina od 69,7 i 68,3% &nbsp;u zavisnosti da li je kori&scaron;ćen hloroform, odnosno DHM kao rastvor&nbsp;za ekstrakciju. Može se zaključiti da je prinos ekstrakcije bio povoljniji pri odnosu 0,5 mL ACN i 2,0&nbsp;mL DHM. Prinosi su se kretali od 68,4% do 92,1%, &scaron;to je ukazalo da su parametri DLLME ekstrakcije optimalni. Kako bi se detaljnije ispitali ključni parametri DLLME tehnike, kori&scaron;ćena je metodologija povr&scaron;ine odziva (RSM), kao i detekcija na osetljivijem kuplovanom masenom detektoru (MS/MS). Optimizovani su HPLC-MS/MS &nbsp;parametri kako bi se obezbedilo zadovoljavajuće hromatografsko &nbsp;razdvajanje i niske granice detekcije (GD, 0,5&ndash;1,0 &mu;g kg^-1) i određivanja (GO, 1,0&ndash;2,5 &mu;g kg^-1) ispitivanih neonikotinoida u medu. Upotrebom centralno kompozitnog dizajna konstruisani su kvadratni modeli ispitivanih faktora: zapremine ekstrakcionog (DHM, 1,0&ndash;3,0 mL) i disperznog (ACN, 0,0&ndash;1,0 mL) sredstva, izračunati statistički parametri i optimizovan proces DLLME upotrebom <em>Derringer</em>-ove funkcije poželjnih odgovora. Upotrebom MMC i SC krivih u opsegu GO&ndash;100,0 &mu;g kg^-1&nbsp;ispitan je uticaj matriksa pri čemu zaključeno je da je najveći uticaj matriksa bio na odziv analitičkog signala nitenpirama, dinotefurana i klotianidina. Ispitani su prinosi odabranih neonikotinoida (R, 74,3&ndash;113,9%), kao i preciznost metode u uslovima ponovljivosti (RSD, 2,74&ndash; 11,8%) i intermedijerne reproduktivnosti (RSD, 6,64&ndash;16,2%). Brza (retenciona vremena 1,5&ndash;9,9 min) i osetljiva metoda, koja tro&scaron;i malu količinu rastvarača, primenjena je za ispitivanje 15 realnih uzoraka meda različitog cvetnog porekla. Rezultati su pokazali da ispitivani med nije sadržao ostatke ispitivanih neonikotinoida u koncentracijama iznad GD. Dalje istraživanje je bilo usmereno ka&nbsp; razvijanju i optimizaciji HPLC-DAD analitičke metode upotrebom DLLME i QuEChERS tehnika za &nbsp;pripremu uzoraka za određivanje 7 neonikotinoida u uzorcima meda. U ovom delu istraživanja optimizovani su i hromatografski parametri, upotrebom RSM sa Box-Behnken-ovim dizajnom i Derringer-ovom funkcijom poželjnih odgovora. Od &nbsp;ispitivanih neonikotinoida dinotefuran i imidakloprid su bili u najvećoj meri izloženi uticaju matriksa, bez obzira na proceduru pripreme uzoraka. Može se istaći da je uticaj matriksa na analitički signal dinotefurana bio izraženiji u slučaju MS/MS, apostrofirajući manju robusnost ove metode određivanja. Prinosi neonikotinoida su &nbsp;bili (R, 73,1&ndash;118,3%), preciznost u uslovima ponovljivosti (RSD, 3,28&ndash;10,40%) i intermedijerne reproduktivnosti (RSD, 6,45&ndash;17,70%), a granice detekcije (GD, 1,5&ndash;2,5 &micro;g kg^-1) i određivanja (GO, 5,0&ndash;10,0 &micro;g kg^-1). Metoda je primenjena za ispitivanje 7 neonikotinoida u 104 uzorkameda različitog cvetnog porekla sa &nbsp;teritorije Autonomne Pokrajine Vojvodine. Detektovano je prisustvo tiakloprida, imidakloprida i tiametoksama u količinama koje su bile ispod MDK RS i EU. Analizirani su uzorci likera od meda - medice. Upoređivane su dve tehnike pripreme uzoraka, DLLME i QuEChERS i primenjeni optimizovani hromatografski &nbsp;uslovi i MS/MS parametri. U slučaju nitenpirama, dinotefurana i tiametoksama uticaj matriksa bio je najizraženiji. Metoda je validovana određivanjem prinosa neonikotinoida (R, 69,2&ndash;113,4%), preciznosti u uslovima ponovljivosti (RSD, 3,21&ndash;12,81%) i intermedijerne reproduktivnosti (RSD, 9,11&ndash;16,63%), kao i granice detekcije (GD, 0,5&ndash;2,5 &micro;g kg^-1) i određivanja (GO, 1,0&ndash;10,0 &micro;g kg^-1). Analizom 10 komercijalno dostupnih likera od meda otkriveno je&nbsp;prisustvo klotianidina i tiakloprida, evčzokinot&scaron; z&nbsp; na neophodnost daljeg kontrolisanja ovog proizvoda na&nbsp;prisustvo neonikotinoida. Ispitana je mogućnost uklanjanja odabranih neonikotinoida (dinotefurana,&nbsp;klotianidina i tiakloprida) iz vodene sredine (reke Dunav). Ispitivanje efikasnosti 6 različitih vrsta&nbsp;uklanjanja odabranih neonikotinoida (u prisustvu prirodne insolacije u laboratorijskim uslovima, sa&nbsp;dodatkom H2O2, sa dodatkom MWCNT, sa dodatkom MWCN+H&nbsp;₂O₂, sa dodatkom Fe-MWCNT, sa dodatkom Fe-MWCNT+H₂O₂) vr&scaron;eno je upotrebom prethodno razvijene HPLC-MS/MS metode. Krive uklanjanja odabranih neonikotinoida, pokazale su da tokom 60 minuta pri prirodnoj insolaciji&nbsp; u laboratorijskim uslovima koncentracija smanjenje oko 25%. Analitički signal dinotefurana dobijen u prisustvu H₂O_2&nbsp;pod istim uslovima ukazuje na uklanjanje ciljnog analita od oko 40%, tiakloprida od oko 70%, a klotianidina u potpunosti. Testirana je adsorpcija ciljnog analita na vi&scaron;ezidnim ugljeničnim nanocevima (MWCNT). Ovim postupkom može da se ukloni oko 30% dinotefurana, oko 50% klotianidina i 60% tiakloprida. U kombinaciji sa H₂O_2&nbsp;, MWCNT pokazuju bolju sposobnost uklanjanja za 15&ndash;50% u zavisnosti od ispitivanog neonikotinoida. Upotreba Fe-MWCNT i njihova kombinacija sa H₂O₂ otvorila je mogućnost za dalja &nbsp;ispitivanja mehanizma uklanjanja. Ustanovljeno je nastajanje intermedijera kojima odgovaraju m/z od 117,5 i 140,6 u slučaju razgradnje dinotefurana u sistemima sa H₂O₂, MWCNT+H₂O₂, Fe-MWCNT+H₂O_2&nbsp;i klotianidina u sistemu Fe-MWCNT+H₂O₂.</p> / <p>Neonicotinoid insecticides, as one of the fastest growing new generation of insecticides, have&nbsp;contributed to a significant reduction of toxicity for the environment; therefore, monitoring and&nbsp;determination of trace levels of the neonicotinoids in honey are necessary and demands highly efficient,&nbsp;selective and sensitive analytical techniques. The objective of the present work was to develop a rapid,&nbsp;sensitive, optimized and accurate analytical method based on liquid chromatography for determining&nbsp;seven neonicotinoid insecticides, dinotefuran, nitenpyram, thiamethoxam, clothianidin, imidacloprid,&nbsp;acetamiprid and thiacloprid in honey and honey liqueur samples. The possibility for determination of&nbsp;clothianidin in honey samples was investigated by HPLC with a diode array detector (HPLC-DAD).&nbsp;Based on preliminary results, it can be concluded that the use of a solid-phase column in combination&nbsp;with a liquid-liquid extraction with dichloromethane results in an acceptable recovery of clothianidin in&nbsp;the samples with a clothianidin concentration of about 0.5 &micro;g g^-1. After obtaining low recovery of&nbsp;clothianidin, dispersed liquid-liquid microextraction (DLLME) was selected as a technique for the&nbsp;preparation of honey samples.. The adequacy of acetonitrile as a dispersing agent was investigated.&nbsp;Besides the chloroform, a dichloromethane was used as a second extracting agent , in order to compare&nbsp;the relative efficiency of the extraction solvents. It can be concluded that the extraction recovery (68.4&ndash;92.1%) was more favorable with the use of 0.5 mL ACN and 2.0 mL DHM. Furthermore, LC-MS/MS&nbsp;parameters were optimized to unequivocally provide good chromatographic separation, low detection&nbsp;(LOD, 0.5&ndash;1.0 &mu;g L^&minus;1) and quantification (LOQ, 1.0&ndash;2.5 &mu;g L^&minus;1) limits for acetamiprid, clothianidin,&nbsp;thiamethoxam, imidacloprid, dinotefuran, thiacloprid and nitenpyram in honey samples. Using different&nbsp;<br />types (chloroform, dichloromethane) and volumes of extraction (1.0&ndash;3.0 mL) and dispersive&nbsp;(acetonitrile; 0.0&ndash;1.0 mL) solvent and by mathematical modeling it was possible to establish the optimal&nbsp;sample preparation procedure. Matrix-matched calibration and blank honey sample spiked in the&nbsp;<span style="font-size: 12px;">concentration range of LOQ&ndash;100.0 &mu;g kg</span>^{<span style="font-size: 12px;">&minus;1&nbsp;</span>}<span style="font-size: 12px;">were used to compensate the matrix effect and to fulfill the&nbsp;</span><span style="font-size: 12px;">requirements of SANCO/12495/2011 for the accuracy (R 74.3&ndash;113.9%) and precision (expressed in&nbsp;</span><span style="font-size: 12px;">terms of repeatability (RSD 2.74&ndash;11.8%) and within-laboratory reproducibility (RSDs &nbsp;6.64&ndash;16.2%)) of&nbsp;</span><span style="font-size: 12px;">the proposed method. The rapid (retention times 1.5&ndash;9.9 min), sensitive and low solvent consumption&nbsp;</span><span style="font-size: 12px;">procedure described in this work provides reliable, simultaneous, and quantitative method applicable for&nbsp;</span><span style="font-size: 12px;">the routine laboratory analysis of seven neonicotinoid residues in 15 real honey samples. Neonicotinoid &nbsp;</span><span style="font-size: 12px;">residues were not detected in any of the investigated samples. The objective of next study was to&nbsp;</span><span style="font-size: 12px;">develop and optimize HPLC-DAD analytical method with dispersive liquid-liquid microextraction&nbsp;</span><span style="font-size: 12px;">(DLLME) and QuEChERS sample preparation procedures for the simultaneously analysis of seven&nbsp;</span><span style="font-size: 12px;">neonicotinoids in honey samples. The liquid chromatographic conditions were optimized by response&nbsp;</span><span style="font-size: 12px;">surface methodology with <em>Box-Behnken</em> design and the global <em>Derringer</em>&acute;s desirability. The optimized&nbsp;</span><span style="font-size: 12px;">method was &nbsp;validated to fulfill the requirements of SANCO/12495/2011 standard for both sample&nbsp;</span><span style="font-size: 12px;">pretreatment procedures providing results for accuracy (R, 73.1&ndash;118.3%), repeatability (RSD, 3.28&ndash;</span><span style="font-size: 12px;">10.40%) and within-laboratory reproducibility (RSD, 6.45&ndash;17.70%), limits of detection (LOD, 1.5&ndash;2.5&nbsp;</span><span style="font-size: 12px;">g&micro; kg</span>^{<span style="font-size: 12px;">-1</span>}<span style="font-size: 12px;">) and quantification (LOQ, 5.0&ndash;10.0 &micro;g kg</span>^{<span style="font-size: 12px;">-1</span>}<span style="font-size: 12px;">). For the first time, more than 100 honey samples&nbsp;</span><span style="font-size: 12px;">collected from all 7 counties of Autonomous Province of Vojvodina were analyzed. The presence of&nbsp;</span><span style="font-size: 12px;">thiacloprid, imidacloprid and thiametoxam was discovered in a small number of samples. The objective&nbsp;</span><span style="font-size: 12px;">of next study was to develop an optimized LC-MS/MS analytical method with DLLME and QuEChERS&nbsp;</span><span style="font-size: 12px;">procedures for analysis of 7 neonicotinoids in honey liqueur. The method was validated to fulfill the&nbsp;</span><span style="font-size: 12px;">requirements of SANCO/12495/2011 for both sample pretreatment procedures providing results for&nbsp;</span><span style="font-size: 12px;">accuracy (R, 69.2&ndash;113.4% for DLLME; 71.8&ndash;94.9% for QuEChERS), precision (RSD expressed in&nbsp;</span><span style="font-size: 12px;">terms of repeatability (3.21&ndash;10.20% for DLLME; 4.19&ndash;12.81% for QuEChERS) and within-laboratory&nbsp;</span><span style="font-size: 12px;">reproducibility (9.11&ndash;16.63% for DLLME; 11.32&ndash;16.40% for QuEChERS)), limits of detection (LOD,&nbsp;</span><span style="font-size: 12px;">0.5&ndash;1.5 g&micro; L</span>^{<span style="font-size: 12px;">-1&nbsp;</span>}<span style="font-size: 12px;">for DLLME; 1.0&ndash;2.5 g&micro; L</span>^{<span style="font-size: 12px;">-1&nbsp;</span>}<span style="font-size: 12px;">for QuEChERS) and quantification (LOQ, 1.0&ndash;5.0 g&micro; L</span>^{<span style="font-size: 12px;">-1&nbsp;</span>}<span style="font-size: 12px;">for&nbsp;</span><span style="font-size: 12px;">DLLME; 2.5&ndash;10.0 &micro;g L</span>^{<span style="font-size: 12px;">-1&nbsp;</span>}<span style="font-size: 12px;">for QuEChERS). Analysis of real honey liqueur samples obtained from local&nbsp;</span><span style="font-size: 12px;">markets showed the presence of clothianidin or thiacloprid in four of the analyzed samples, therefore&nbsp;</span><span style="font-size: 12px;">implicating the necessity of ongoing control of this type of traditional product. &nbsp;Removal of selected&nbsp;</span><span style="font-size: 12px;">neonicitinoid insecticides - dinotefuran, clothianidin and thiacloprid using MWCNT and H</span><span style="font-size: 12px;">₂O_2&nbsp;</span><span style="font-size: 12px;">from&nbsp;</span><span style="font-size: 12px;">Danube water matrix was investigated. &nbsp;Efficiency of different systems for neonicotinoids removal&nbsp;</span><span style="font-size: 12px;">(under natural insolation in laboratory, with H</span><span style="font-size: 12px;">₂O₂, with MWCNT, with MWCNT+ H</span><span style="font-size: 12px;">₂O₂, with Fe-MWCNT, with Fe-MWCNT+H₂O₂) was evaluated with developed LC-MS/MS method. Analysis of&nbsp;</span><span style="font-size: 12px;">degradation rates revealed loss of 25% of the initial neonicotinoid concentration under natural insolation in&nbsp;</span><span style="font-size: 12px;">the laboratory conditions during 60 min. Addition of chemical agent H₂O_2&nbsp;promoted loss of 40% of the&nbsp;</span><span style="font-size: 12px;">initial dinotefuran, 70% of thiacloprid concentration and total removal of clothianidin under same&nbsp;</span><span style="font-size: 12px;">conditions. With the addition &nbsp;of MWCNT concentration of dinotefuran, clothianidin and thiacloprid&nbsp;</span><span style="font-size: 12px;">decayed for 30, 50 and 60%, respectively. Iron modification of MWCNT in combination with H</span><span style="font-size: 12px;">₂O_2&nbsp;</span><span style="font-size: 12px;">increased the removal rate of selected neonicotinoid for 15&ndash;50%. Presence of intermediates was&nbsp;</span><span style="font-size: 12px;">discovered in systems of dinotefuran with H₂O₂, MWCNT+H</span><span style="font-size: 12px;">₂O₂, e-MWCNT+H₂O_2&nbsp;</span><span style="font-size: 12px;">and of&nbsp;</span><span style="font-size: 12px;">clothianidin in systems with Fe-MWCNT+H₂O_2&nbsp;</span><span style="font-size: 12px;">with m/z of 117,5 and 140,6.&nbsp;</span></p>

The dissertation evaluated the formal, stylistic and contextual analysis of the painting oeuvre of the Cremonese native Antonio Campi. Monographic elaboration of Campi's oeuvre complement to the existing range of syntheses a number of information that has been in the literature so far omitted. The work assessed Antonio's oeuvre on the revision of archival material preserved in Milanese and Cremonese state and church archives, as well as by the means of thorough study of the secondary literature. Chronology of Campi's production was based on the stylistic and formal analysis and at the same time it has been enriched by a number of comparisons of the Lombardy-Ligurian region. Perspective at Antonio's oeuvre was accompanied by drawings and panel paintings that have emerged in the art market in recent years. With this thorough analysis, it became clear that the simple definition of an older Italian scientific literature that had Antonio Campi understood as a painter, who by his work formed the basis of Caravaggio chiaroscuro approach in the last decades of the 16th century and in the early years of the 17th age, proved to be inaccurate. It became clear that with this view we can not identify ourselves any more. Constant changes in mood, surprise, unpredictability, restlessness and individuality, the...

<p>Cilj&nbsp; ove&nbsp; doktorske&nbsp; disertacije&nbsp; je&nbsp; bio&nbsp; razvoj&nbsp; brzih&nbsp; i&nbsp; pouzdanih&nbsp; voltametrijskih&nbsp; metoda zasnovanih na primeni jednostavnih i savremenih elektroda/senzora na bazi ugljeničnih materijala (ugljenične&nbsp; paste&nbsp; napravljene&nbsp; od&nbsp; grafitnog&nbsp; praha&nbsp; i&nbsp; parafinskog&nbsp; ulja&nbsp; i&nbsp; &scaron;tampanih&nbsp; ugljeničnih elektroda)&nbsp; za&nbsp; određivanje&nbsp; H ₂O₂u&nbsp; odabranim&nbsp; složenim&nbsp; model&nbsp; i&nbsp; realnim&nbsp; uzorcima.&nbsp; U&nbsp; tu&nbsp; svrhu, ispitana je primenljivost različitih radnih elektroda. Amperometrijska&nbsp; metoda&nbsp; zasnovana&nbsp; na&nbsp; elektrodi&nbsp; od&nbsp; ugljenične&nbsp; paste&nbsp; (CPE)&nbsp; zapreminski modifikovane&nbsp; sa&nbsp; 5%&nbsp; (m:m)&nbsp; MnO2 je,&nbsp; pri&nbsp; optimizovanim&nbsp; uslovima&nbsp; i&nbsp; pri&nbsp; radnom&nbsp; potencijalu&nbsp; od 0,40 V&nbsp; u&nbsp; odnosu&nbsp; na&nbsp; zasićenu&nbsp; kalomelovu&nbsp; elektrodu&nbsp; (ZKE)&nbsp; u&nbsp; fosfatnom&nbsp; puferu&nbsp; pH&nbsp; 7,50&nbsp; kao pomoćnom elektrolitu, omogućila kvantifikaciju H ₂O₂ u opsegu koncentracija od 1,4 do 65 &micro;g mL -1 sa&nbsp; relativnom&nbsp; standardnom&nbsp; devijacijom&nbsp; (RSD)&nbsp; manjom&nbsp; od&nbsp; 10%.&nbsp; Ova&nbsp; metoda&nbsp; je&nbsp; primenjena&nbsp; za određivanje sadržaja H ₂O₂u uzorcima podzemne vode iz centralnog Banata (Pokrajina Vojvodina, Srbija)&nbsp; tretirane&nbsp; Fentonovim&nbsp; (Fe²⁺ i&nbsp; H ₂O₂ )&nbsp; i&nbsp; Fentonu-sličnim&nbsp; (Fe ³⁺ i&nbsp; H ₂O₂ )&nbsp; reagensima&nbsp; u&nbsp; cilju uklanjanja&nbsp; prirodnih&nbsp; organskih&nbsp; materija&nbsp; (POM)&nbsp; pri&nbsp; čemu&nbsp; su&nbsp; kori&scaron;ćene&nbsp; različite&nbsp; početne koncentracije&nbsp; gvožđa&nbsp; i&nbsp; različiti&nbsp; odnosi&nbsp; molarnih&nbsp; koncentracija&nbsp; gvožđa&nbsp; i&nbsp; H ₂O₂ .&nbsp; Utvrđeno&nbsp; je&nbsp; da oksidaciono&nbsp; stanje&nbsp; gvožđe&nbsp; (Fe²⁺ ili&nbsp; Fe ³⁺)&nbsp; i&nbsp; molarni&nbsp; odnos&nbsp; jona&nbsp; Fe&nbsp; i&nbsp; H₂O₂ utiču&nbsp; na&nbsp; stepen potro&scaron;nje/razgradnje&nbsp; H₂O₂<br />u&nbsp; podzemnoj&nbsp; vodi&nbsp; sa&nbsp; visokim&nbsp; sadržajem&nbsp; POM.&nbsp; Takođe,&nbsp; u&nbsp; slučaju Fentonu-sličnog&nbsp; procesa,&nbsp; za&nbsp; sve&nbsp; početne&nbsp; koncentracije&nbsp; Fe ³⁺ i&nbsp; H ₂O_{2 ,}&nbsp; signifikantna&nbsp; količina&nbsp; H ₂O₂ostaje&nbsp; neiskori&scaron;ćena,&nbsp; &scaron;to&nbsp; ukazuje&nbsp; na&nbsp; nižu&nbsp; efikasnost&nbsp; ovakvog&nbsp; sistema u&nbsp; poređenju&nbsp; sa&nbsp; Fentonovim procesom.&Scaron;tampana&nbsp; ugljenična&nbsp; elektroda&nbsp; (SPCE)&nbsp; zapreminski&nbsp; modifikovana&nbsp; sa&nbsp; MnO 2 kao medijatorom&nbsp; je&nbsp; primenjena&nbsp; za&nbsp; određivanje&nbsp; sadržaja&nbsp; H₂O₂ u&nbsp; toku&nbsp; Fentonovog&nbsp; (Fe ²⁺ ,&nbsp; H₂O₂ )&nbsp; i vidljivom&nbsp; svetlo&scaron;ću&nbsp; potpomognutog&nbsp; foto-Fentonovog&nbsp; (Fe²⁺,&nbsp; H ₂O₂,&nbsp; h&nu;)&nbsp; procesa&nbsp; uklanjanja neonikotinoidnog&nbsp; insekticida&nbsp; acetamiprida&nbsp; (ACT).&nbsp; Pri&nbsp; optimizovanim&nbsp; uslovima&nbsp; (radni&nbsp; potencijal 0,40&nbsp; V&nbsp; u&nbsp; odnosu&nbsp; na&nbsp; ZKE,&nbsp; fosfatni&nbsp; pufer&nbsp; pH&nbsp; 7,50&nbsp; kao&nbsp; pomoćni&nbsp; elektrolit)&nbsp; amperometrijskog određivanja&nbsp; H ₂O₂ ,&nbsp; postignuta&nbsp; je&nbsp; linearnost&nbsp; u&nbsp; opsegu&nbsp; koncentracija&nbsp; 0,01&ndash;1,24&nbsp; mmol&nbsp; L-1(0,34&ndash; 42,2 &micro;g mL -1<br />) i vrednost RSD nije prelazila 4,2%. U ispitivanimuzorcima (nakon odgovarajućeg<br />pode&scaron;avanja pH vrednosti od 2,8 do 7,5 odmah nakon&nbsp; uzorkovanja radi stopiranja ili maksimalnog usporavanja&nbsp; procesa&nbsp; oksidacije,&nbsp; filtriranja,&nbsp; zamrzavanja&nbsp; i&nbsp; odmrzavanja&nbsp; neposredno&nbsp; pre&nbsp; merenja) sadržaj&nbsp; H ₂O₂ je&nbsp; određen&nbsp; metodom&nbsp; standardnog&nbsp; dodatka&nbsp; analiziranjem&nbsp; odgovarajućih amperometrijskih&nbsp; krivi.&nbsp; Paralelna&nbsp; HPLC-DAD&nbsp; merenja&nbsp; su&nbsp; vr&scaron;ena&nbsp; u&nbsp; cilju&nbsp; praćenja koncentracije/uklanjanja ACT. U slučaju foto-Fentonovog procesa (početne koncentracije 0,31; 2,0 i 3,0 mmol L -1 (70,0; 111,7 i 102,1 &micro;g mL -1 ) za ACT, Fe<br />²⁺ i H ₂O₂, redom) nakon 10 min H ₂O₂je izreagovao, a može se smatrati da je ACT uklonjen nakon 5 min. U toku Fentonovog procesa ACT je&nbsp; uklonjen&nbsp; nakon&nbsp; 20&nbsp; min&nbsp; tretmana&nbsp; i&nbsp; oko&nbsp; 10%&nbsp; početne&nbsp; koncentracije&nbsp; H ₂O₂ je&nbsp; ostalo&nbsp; u&nbsp; sistemu<br />neiskori&scaron;ćeno.CPE&nbsp; je&nbsp; povr&scaron;inski&nbsp; modifikovane&nbsp; kompozitom&nbsp; na&nbsp; bazi&nbsp; nanočestica&nbsp; Pt&nbsp; (&lt;&nbsp; 5&nbsp; nm)&nbsp; i grafitizovanog&nbsp; ugljenika&nbsp; (Pt-C,&nbsp; 10%&nbsp; Pt&nbsp; na&nbsp; Vulkanu&nbsp; XC72)&nbsp;&nbsp; etodom&nbsp; nano&scaron;enja&nbsp; kapi. Nemodifikovana&nbsp; CPE&nbsp; i&nbsp; modifikovana&nbsp; (Pt-C/CPE)&nbsp; su&nbsp;&nbsp; okarakterisane&nbsp; primenom&nbsp; SEM/EDS&nbsp; i&nbsp; CV merenja.&nbsp; Pt-C/CPE&nbsp; je&nbsp; pokazala&nbsp; izuzetne&nbsp; elektrokatalitičke&nbsp; osobine&nbsp; u&nbsp; pogledu&nbsp; elektrohemijskeredoks&nbsp; reakcije&nbsp; H<br />₂O₂ u&nbsp; poređenju&nbsp; sa&nbsp; nemodifikovanom&nbsp; CPE&nbsp; u&nbsp; fosfatnom&nbsp; puferu&nbsp; (0,1 mol&nbsp; L -1 ;<br />pH 7,50),&nbsp; a&nbsp; takođe&nbsp; i&nbsp; u&nbsp; acetatnom&nbsp; puferu&nbsp; (0,1&nbsp; mol&nbsp; L -1 ;&nbsp; pH&nbsp; 4,50)&nbsp; kao&nbsp;&nbsp; pomoćnim&nbsp; elektrolitima. Prilikom&nbsp; amperometrijskog&nbsp; određivanja&nbsp; H ₂O₂ primenom&nbsp; Pt-C/CPE&nbsp; u&nbsp; model&nbsp; sistemima, zadovoljavajuća linearnost je postignuta u koncentracionom opseguH₂O₂od 0,15 do 1,45 &micro;g mL -1 ,dok su vrednosti GO iznosile 0,06 &micro;g mL -1 (pH 7,50, radni potencijal 0,20 V) i 0,10 &micro;g mL -1 (pH<br />4,50,&nbsp; radni&nbsp; potencijal&nbsp; 0,50&nbsp; V).&nbsp; Optimizovane&nbsp; analitičke&nbsp; metode&nbsp; su&nbsp; primenjene&nbsp; za&nbsp; određivanje sadržaja H ₂O₂ u komercijalno dostupnim proizvodima za ličnu negu: rastvoru za dezinfekciju (pH 7,50)&nbsp; i&nbsp; rastvoru&nbsp; za&nbsp; či&scaron;ćenje&nbsp; kontaktnih&nbsp; sočiva&nbsp; (pH&nbsp; 4,50).&nbsp; Amperometrijski&nbsp; dobijeni&nbsp; rezultati&nbsp; su&nbsp; u dobrom&nbsp; slaganju&nbsp; sa&nbsp; rezultatima&nbsp; dobijenim&nbsp; primenom&nbsp; tradicionalne&nbsp; spektrofotometrijske&nbsp; metode bazirane&nbsp; na&nbsp; titanijum-sulfatu&nbsp; kao&nbsp; reagensu&nbsp; sa&nbsp; određenim&nbsp; koncentracijama&nbsp; 2,91%&nbsp; i&nbsp; 2,94%&nbsp; za<br />dezinfekcioni rastvor i 3,04% i 3,17% za rastvor zakontaktna sočiva, redom. RSD je bila manja od 2%.&nbsp; Postignuti&nbsp; rezultati&nbsp; su&nbsp; u&nbsp; dobrom&nbsp; slaganju&nbsp; sa&nbsp; sadržajem&nbsp; H<br />₂O₂deklarisanim&nbsp; od&nbsp; strane proizvođača (3%) u oba ispitivana uzorka. Pt-C/CPE je takođe testirana za praćenje koncentracije H₂O₂ u rastvoru za kontaktna sočiva u toku procesa njegove neutralizacije/razgradnje. Nakon 6 h procesa neutralizacije, 24,68&nbsp; &micro;g mL -1 je bila određena koncentracija H ₂O_{2 ,} &scaron;to je ispod dozvoljene<br />H₂O₂koncentracije u rastvoru za kontaktna sočiva imajući u vidu granicu koja izaziva iritaciju oka. CPE&nbsp; je&nbsp; povr&scaron;inski&nbsp; modifikovana&nbsp; vi&scaron;ezidnim&nbsp; ugljeničnim&nbsp; nanocevima&nbsp; (MWCNT)&nbsp; i kompozitima MnO 2 -MWCNT ili Pt-MWCNT metodom nano&scaron;enja kapi radi pripreme jednostavnih, osetljivih i pouzdanih voltametrijskih senzora za&nbsp; određivanje H ₂O₂u odabranom uzorku. Rezultati SEM/EDS&nbsp; analize&nbsp; kompozitnih&nbsp; materijala&nbsp; su&nbsp; potvrdili da&nbsp; su&nbsp; medijatori,&nbsp; čestice&nbsp; MnO 2 i&nbsp; Pt, nasumično&nbsp; raspoređeni na povr&scaron;ini MWCNT i zastupljeni sa blizu 5% (m:m) u kompozitu izraženo<br />preko Mn i Pt. CV merenja su vr&scaron;ena sa pripremljenim radnim elektrodama u acetatnom (pH 4,50), fosfatnom&nbsp; (pH&nbsp; 7,50)&nbsp; i&nbsp; boratnom&nbsp; (pH&nbsp; 9,18)&nbsp; puferu&nbsp; kako&nbsp; bi&nbsp; se&nbsp; okarakterisalo&nbsp; osnovno elektrohemijsko&nbsp; pona&scaron;anje&nbsp; H ₂O₂i&nbsp; odabrali&nbsp; pogodni&nbsp; radni&nbsp; potencijali&nbsp; za&nbsp; amperometrijsko određivanje ovog ciljnog analita. Pt- WCNT/CPE je primenljiva za rad kako u fosfatnom puferu pH&nbsp; 7,50&nbsp; tako&nbsp; i&nbsp; u&nbsp; acetatnom&nbsp; puferu&nbsp; pH&nbsp; 4,50&nbsp; V&nbsp; kako&nbsp; pri&nbsp; negativnim&nbsp; tako&nbsp; i&nbsp; pri&nbsp; pozitivnim&nbsp; radnim<br />potencijalima, pri&nbsp; čemu su vrednosti RSD uglavnom ispod 2,5%. U slučaju MnO 2<br />-MWCNT/CPE, na&nbsp; potencijalu&nbsp; 0,30&nbsp; V&nbsp; i&nbsp; vi&scaron;im&nbsp; vrednostima,&nbsp; oksidacioni&nbsp; signali&nbsp; H<br />₂O₂ su&nbsp; signifikantni&nbsp; u&nbsp; blago alkalnoj sredini (pH 7,50), pri pH 4,50 ova elektroda pokazuje nezadovoljavajuće pona&scaron;anje, dok&nbsp; pri pH 9,18 ima prihvatljive performanse. Granice određivanja (GO) su bile u oblasti &micro;g mL -1 . H ₂O₂ je&nbsp; određen&nbsp; u&nbsp; spajkovanom&nbsp; uzorku&nbsp; mleka&nbsp; metodom&nbsp; standardnog&nbsp; dodatka&nbsp; nakon&nbsp; odgovarajuće pripreme&nbsp; uzorka&nbsp; (pH&nbsp; pode&scaron;avanje&nbsp; i&nbsp; centrifugiranje)&nbsp; i&nbsp; primenom&nbsp; optimizovane&nbsp; amperometrijske procedure (acetatni pufer pH 4,50, radni&nbsp; potencijal-0,75 V) koristeći Pt-MWCNT/CPE kao radnu elektrodu. RSD za tri&nbsp; ponovljena merenja je iznosila 2,5%, dok je prinos metode bio ne&scaron;to veći od 71%.<br />Kompozitni materijali koji se sastoje od MWCNT i&nbsp; čestica na bazi Pd (Pd-MWCNT) ili Pt (Pt-MWCNT) su primenjeni za pripremu zapreminski modifikovanih SPCE (Pd-MWCNT-SPCE i Pt-MWCNT-SPCE)&nbsp; i&nbsp; povr&scaron;inski&nbsp; modifikovane&nbsp; SPCE&nbsp; (Pd-MWCNT/SPCE).&nbsp; Ove&nbsp; elektrode,&nbsp; kao&nbsp; i nemodifikovana&nbsp; SPCE&nbsp; i&nbsp; MWCNT-SPCE,&nbsp; su&nbsp; okarakterisane primenom&nbsp; CV&nbsp; i&nbsp; amperometrije&nbsp; u fosfatnom puferu pH 7,50 radi određivanja H ₂O₂ . Pd-MWCNT-SPCE i Pd-MWCNT/SPCE su se pokazale&nbsp; pogodnim&nbsp; za&nbsp; određivanje&nbsp; H ₂O₂ na&nbsp; radnim&nbsp; potencijalima&nbsp; između&nbsp; -0,50&nbsp; i&nbsp; 0,50&nbsp; V,&nbsp; a&nbsp; PtMWCNT-SPCE na ispitivanim radnim potencijalima od -0,80 do 0,70 V. Ove&nbsp; elektrode su zatim modifikovane&nbsp; enzimom&nbsp; glukoza&nbsp; oksidazom&nbsp; (GOx)&nbsp; metodom&nbsp; nano&scaron;enja&nbsp; kapi&nbsp; rastvora&nbsp; GOx&nbsp; i Nafion &reg; -a&nbsp; na&nbsp; njihovu&nbsp; povr&scaron;inu,&nbsp; pri&nbsp; čemu&nbsp; je&nbsp; optimizovana&nbsp; količina&nbsp; nanetog&nbsp; biofilma.&nbsp; GOx/PdMWCNT-SPCE&nbsp; je&nbsp; pokazala&nbsp; bolje&nbsp; analitičke&nbsp; performanse&nbsp; za&nbsp; određivanje&nbsp; glukoze&nbsp; u&nbsp; poređenju&nbsp; sa GOx/Pd- WCNT/SPCE.&nbsp; Kao&nbsp; optimalan&nbsp; radni&nbsp; potencijal&nbsp; GOx/Pd-MWCNT-SPCE&nbsp; je&nbsp; odabrana<br />vrednost&nbsp; potencijala&nbsp; -0,40&nbsp; V&nbsp; u&nbsp; odnosu&nbsp; na&nbsp; ZKE,&nbsp; sa&nbsp; zadovoljavajućom&nbsp; linearno&scaron;ću&nbsp; u&nbsp; ispitivanom opsegu&nbsp; koncentracija&nbsp; glukoze&nbsp; od&nbsp; 0,16&nbsp; do&nbsp; 0,97&nbsp; mmol&nbsp; L -1 (od&nbsp; 29,1&nbsp; do&nbsp; 174&nbsp; &micro;g&nbsp; mL -1),&nbsp; dok&nbsp; je&nbsp; GO iznosila 0,14 mmol L -1 (25 &micro;g mL<br />-1 ). Optimizovana metoda zasnovana na GOx/Pd-MWCNT-SPCE je&nbsp; uspe&scaron;no&nbsp; primenjena&nbsp; za&nbsp; određivanje&nbsp; glukoze&nbsp; u&nbsp; uzorku&nbsp; livadskog&nbsp; meda.&nbsp; Dobijeni&nbsp; rezultati&nbsp; su&nbsp; u dobroj&nbsp; saglasnosti&nbsp; sa&nbsp; onima&nbsp; dobijenim&nbsp; primenom&nbsp; komercijalno&nbsp; dostupnog&nbsp; aparata&nbsp; za&nbsp; merenje glukoze. Pogodan radni potencijal za GOx/Pt-MWCNT-SPCE je bio -0,50 V u odnosu na ZKE, pri čemu je zadovoljavajuća linearnost postignuta u ispitivanom opsegu koncentracija glukoze od 65,8 do 260,6 &micro;g mL -1 , sa GO 35 &micro;g mL -1 . Optimizovana metoda zasnovana na GOx/Pt-MWCNT-SPCE je&nbsp; uspe&scaron;no&nbsp; primenjena&nbsp; za&nbsp; određivanje&nbsp; glukoze&nbsp; u&nbsp; u&nbsp; uzorku&nbsp; belog&nbsp; grožđa&nbsp; i&nbsp; uzorku&nbsp; tableta (Traubenzucker-bonbons),&nbsp; pri&nbsp; čemu&nbsp; su&nbsp; dobijeni&nbsp; rezultati&nbsp; u&nbsp; dobroj&nbsp; saglasnosti&nbsp; sa&nbsp; rezultatima dobijenim primenom Accu-Chek aparata.<br />Na&nbsp; osnovu&nbsp; dobijenih&nbsp; rezultata&nbsp; može&nbsp; se&nbsp; zaključiti&nbsp; da&nbsp; su&nbsp; razvijene&nbsp; analitičke&nbsp; metode&nbsp; pre svega jednostavne, pouzdane i pogodne za dobijanje brzih informacija o sadržaju H ₂O₂ u različitim tipovima&nbsp; uzoraka.&nbsp; Svakako&nbsp; odabir&nbsp; pogodne&nbsp; radne&nbsp; elektrode,&nbsp; kao&nbsp; i&nbsp; optimizacija&nbsp; eksperimentalnih uslova su ključni faktori za uspe&scaron;no određivanje H ₂O₂</p> / null / <p>The aim of this doctoral dissertation was the development of fast and reliable voltammetric methods&nbsp; based&nbsp; on&nbsp; the&nbsp; application&nbsp; of&nbsp; simple&nbsp; and&nbsp; contemporary&nbsp; electrodes/sensors&nbsp; based&nbsp; on carbonaceous materials (carbon paste made of graphite powder and paraffin oil and screen printed carbon electrodes) for the determination of H <span id="cke_bm_571S" style="display: none;">&nbsp;</span>₂<span id="cke_bm_571E" style="display: none;">&nbsp;</span>O₂ in the selected complex model and real samples.For this purpose, applicability of different working electrodes was investigated.The&nbsp; amperometric&nbsp; method&nbsp; based&nbsp; on&nbsp; carbon&nbsp; paste&nbsp; electrode&nbsp; (CPE)&nbsp; bulk- modified&nbsp; &nbsp;&nbsp; with 5% (m:m) MnO 2 , under optimized conditions, with a working potential of 0.40 V vs. the saturated calomel&nbsp; elect<span id="cke_bm_572E" style="display: none;">&nbsp;</span>rode&nbsp; (SCE)&nbsp; and&nbsp; a&nbsp; phosphate&nbsp; buffer&nbsp; solution&nbsp; (pH&nbsp; 7.50)&nbsp; as&nbsp; supporting&nbsp; electrolyte, enabled the quantitation of H <span id="cke_bm_577S" style="display: none;">&nbsp;</span>₂<span id="cke_bm_577E" style="display: none;">&nbsp;</span>O₂in the concentration interval from 1.4 to 65 &micro;g mL &minus;1 with a relative standard deviation (RSD) of less than 10%. This meth<span id="cke_bm_578E" style="display: none;">&nbsp;</span>od was applied for the determination of the H<span id="cke_bm_583S" style="display: none;">&nbsp;</span>₂<span id="cke_bm_583E" style="display: none;">&nbsp;</span>O₂consumption&nbsp; in&nbsp; samples&nbsp; of&nbsp; groundwater&nbsp; fro<span id="cke_bm_584E" style="display: none;">&nbsp;</span>m&nbsp; the&nbsp; Central&nbsp; Banat&nbsp; region&nbsp; (Province&nbsp; of Vojvodina, Serbia) treated by the Fenton (Fe ²⁺and H ₂O₂ ) and Fenton-&nbsp; like (Fe ³⁺and H ₂O₂ ) reagents to remove natural organic matter (NOM) at&nbsp; differentinitial concentrations of iron species, and of their molar ratios to the initial concentration of H₂O₂ . It was found that the form of Fe (Fe ²⁺ or Fe ³⁺ )and the molar&nbsp; ratio to H ₂O₂influenced the degree of the H₂O₂ decomposition in the groundwater with high NOM content. Besides, in the case of the Fenton-like process, for all initial doses of Fe ³⁺ and H<span id="cke_bm_604S" style="display: none;">&nbsp;</span>₂<span id="cke_bm_604E" style="display: none;">&nbsp;</span>O₂, a sign<span id="cke_bm_605E" style="display: none;">&nbsp;</span>ificant amount of H<span id="cke_bm_610S" style="display: none;">&nbsp;</span>₂<span id="cke_bm_610E" style="display: none;">&nbsp;</span>O₂ remained unused, whi<span id="cke_bm_611E" style="display: none;">&nbsp;</span>ch also indicates a lower efficiency of such system compared to the Fenton process. Screen&nbsp; printed&nbsp; carbon&nbsp; electrode&nbsp; (SPCE)&nbsp; bulk-modified&nbsp; with&nbsp; MnO&nbsp;₂ as&nbsp; a&nbsp; mediator&nbsp; was applied&nbsp; for&nbsp; amperometric&nbsp; determination&nbsp; of&nbsp; the&nbsp; H <span id="cke_bm_617S" style="display: none;">&nbsp;</span>₂<span id="cke_bm_617E" style="display: none;">&nbsp;</span>O₂ content&nbsp; during&nbsp; the&nbsp; Fenton&nbsp; (Fe ²⁺ ,&nbsp; H <span id="cke_bm_624S" style="display: none;">&nbsp;</span>₂<span id="cke_bm_624E" style="display: none;">&nbsp;</span>O₂)&nbsp; and <span id="cke_bm_625E" style="display: none;">&nbsp;</span>visible&nbsp; light-assisted<span id="cke_bm_618E" style="display: none;">&nbsp;</span>,&nbsp; photo-Fenton&nbsp; (Fe ^2+&nbsp; ,&nbsp; H <span id="cke_bm_631S" style="display: none;">&nbsp;</span>₂<span id="cke_bm_631E" style="display: none;">&nbsp;</span>O₂ ,&nbsp; h&nu;)<span id="cke_bm_632E" style="display: none;">&nbsp;</span>&nbsp; based&nbsp; removal&nbsp; of&nbsp; neonicotinoid&nbsp; insecticide acetamiprid (ACT). Under&nbsp; optimized conditions (working potential of 0.40 V vs. SCE, phosphate buffer&nbsp; pH&nbsp; 7.50&nbsp; as&nbsp; supporting&nbsp; electrolyte)&nbsp; amperometric&nbsp; determination&nbsp; of&nbsp; H <span id="cke_bm_637S" style="display: none;">&nbsp;</span>₂<span id="cke_bm_637E" style="display: none;">&nbsp;</span>O₂showed&nbsp; a&nbsp; linear dynamic range from 0.01 to 1.24 mmol L -1 (from 0.34 to 42.2 &micro;g mL -1) and the RSD did not exceed 4.2%. In the investigated samples (after appropriate pH adjustment from 2.8 to 7.5 instantly after the sampling<span id="cke_bm_638E" style="display: none;">&nbsp;</span> to stop or maximum decelerate the oxidation processes, filtering, and storage of the deep- frozen sample with defrosting immediately before the measurements) the H <span id="cke_bm_643S" style="display: none;">&nbsp;</span>₂<span id="cke_bm_643E" style="display: none;">&nbsp;</span>O₂&nbsp; contents were determined by the standard addition method by analyzing the corresponding amperometric curves. Parallel HPLC-DAD measurements were performed to monito<span id="cke_bm_644E" style="display: none;">&nbsp;</span>r the concentration/removal of ACT. In the case of the photo- Fenton process (initial concentrations: 0.31; 2.0 and 3.0 mmol L -1 (70.0; 111.7 and 102.1 &micro;g mL -1 ) of ACT, Fe²⁺ and H <span id="cke_bm_650S" style="display: none;">&nbsp;</span>₂<span id="cke_bm_650E" style="display: none;">&nbsp;</span>O₂, respec<span id="cke_bm_651E" style="display: none;">&nbsp;</span>tively) after 10 min of irradiation H <span id="cke_bm_656S" style="display: none;">&nbsp;</span>₂<span id="cke_bm_656E" style="display: none;">&nbsp;</span>O₂ was&nbsp; consumed&nbsp; and&nbsp; it&nbsp; can&nbsp; be&nbsp; consi<span id="cke_bm_657E" style="display: none;">&nbsp;</span>dered&nbsp; that&nbsp; ACT&nbsp; was&nbsp; removed&nbsp; after&nbsp; 5&nbsp; min.&nbsp; During&nbsp; the&nbsp; Fenton process ACT was removed after 20 min of treatment and around 10% of the initial concentration of the H 2O2 remained still unused.<br />CPE&nbsp; was&nbsp; surface&nbsp; modified&nbsp; with&nbsp; a&nbsp; composite&nbsp; of&nbsp; Pt&nbsp; nanoparticles&nbsp; (&lt;&nbsp; 5&nbsp; nm)&nbsp; on&nbsp; graphitized carbon (Pt-C, 10% Pt on Vulcan XC72) by simply dropcoating method. The unmodified CPE and the&nbsp; modified&nbsp; one&nbsp; (Pt-C/CPE)&nbsp; were&nbsp; characterized&nbsp; by&nbsp;&nbsp; EM/EDS&nbsp; and&nbsp; CV&nbsp; measurements.&nbsp; The&nbsp; PtC/CPE showed remarkable electrocatalytic propertiestoward the electrochemical redox reaction of H<span id="cke_bm_662S" style="display: none;">&nbsp;</span>₂<span id="cke_bm_662E" style="display: none;">&nbsp;</span>O₂ compared to&nbsp; modified CPE in phosphate buffer (0.1 mol L -1 ; pH 7.50), as well in acetatebuffer&nbsp; (0.1 mol&nbsp; L -1 ; pH .50) supporting&nbsp; electrolytes. Amperometry of&nbsp; H2O2 in the concentration range from 0.15 to 1.45 &micro;g mL -1 with the Pt-C/CPE showed acceptable linearity, while the obtained values of LOQs were 0.06 &micro;g mL -1&nbsp; (pH 7.50, working potential 0.20 V) and 0.10 &micro;g mL -1 (pH 4<span id="cke_bm_663E" style="display: none;">&nbsp;</span>.50, working potential 0.50 V). The proposed analytical&nbsp; methods were applied to the determination of the H 2O2 content in commercially available personal care products; i.e., disinfection (pH 7.50) and contact lens cleaning solutions (pH 4.50). The obtained amperometric results are in good agreement with those measured by traditional titanium sulfatereagent based spectrophotometric method with determined concentrations as 2.91% and 2.94%&nbsp; for the disinfection product, and 3.04% and 3.17% for the contact lens solution, respectively. RSD was lower than 2%. The obtained results are in a good agreement with the amounts of the H<span id="cke_bm_668S" style="display: none;">&nbsp;</span>₂<span id="cke_bm_668E" style="display: none;">&nbsp;</span>O₂declared by producers (3%) in the both investigated samples. The Pt-C/CPE was also tested for monitoring of the H<span id="cke_bm_674S" style="display: none;">&nbsp;</span>₂<span id="cke_bm_674E" style="display: none;">&nbsp;</span>O₂ residual concentration in contact lens&nbsp; solution&nbsp; during&nbsp; its&nbsp; neutralization/decomposition&nbsp; rocess.&nbsp; At&nbsp; 6&nbsp; h&nbsp; of<span id="cke_bm_675E" style="display: none;">&nbsp;</span>&nbsp; neutralization&nbsp; treatment 24.68 &micro;g mL -1 of the H <span id="cke_bm_680S" style="display: none;">&nbsp;</span>₂<span id="cke_bm_680E" style="display: none;">&nbsp;</span>O₂was&nbsp; determined which is almost half of the allowedH2<span id="cke_bm_681E" style="display: none;">&nbsp;</span>O2 concentration in the case of the contact lens solution concerningthe limit of eye irritation. CPE&nbsp; was&nbsp; surface&nbsp;&nbsp; modified&nbsp; with&nbsp; multiwalled&nbsp; carbon&nbsp; nanotubes&nbsp; (MWCNT)&nbsp; and&nbsp; with composites of MnO₂-MWCNT or Pt-MWCNT by drop coating method to prepare simply, sensitive and reliable volta<span id="cke_bm_669E" style="display: none;">&nbsp;</span>mmetric sensors for the determination of H <span id="cke_bm_687S" style="display: none;">&nbsp;</span>₂<span id="cke_bm_687E" style="display: none;">&nbsp;</span>O₂in selected sample. The results of the&nbsp; SEM/<span id="cke_bm_688E" style="display: none;">&nbsp;</span>EDS&nbsp; analysis&nbsp; of&nbsp; composite&nbsp; materials&nbsp; have&nbsp; confirmed&nbsp; that&nbsp; the&nbsp; mediators,&nbsp; MnO ₂ and&nbsp; Pt&nbsp; articles, are randomly distributed on the surface of MWCNT and represent nearly 5% (m:m) of the composite expressed as Mn and Pt. CV measurements were performed&nbsp; with prepared electrodes in acetate&nbsp; (pH&nbsp; 4.50),&nbsp; phosphate&nbsp; (pH&nbsp; 7.50)&nbsp; and&nbsp; borate&nbsp; (pH&nbsp; 9.18)&nbsp; buffers&nbsp; to&nbsp; characterize&nbsp; the&nbsp; basic electrochemical&nbsp; behavior&nbsp; of&nbsp; H <span id="cke_bm_694S" style="display: none;">&nbsp;</span>₂<span id="cke_bm_694E" style="display: none;">&nbsp;</span>O₂ and&nbsp; to&nbsp; select&nbsp; the&nbsp; working&nbsp; potentials&nbsp; suitable&nbsp; for&nbsp; amperometric determination&nbsp; of&nbsp; this&nbsp; target&nbsp; analyte.&nbsp; The&nbsp; Pt-MWCNT/CPE&nbsp; performs&nbsp; well&nbsp; in&nbsp; phosphate&nbsp; buffer pH .50 and acetate buffer solution pH 4.50 in the&nbsp; negative as well as in the positive polarization range with RSD mainly lower than 2.5%. In case of MnO₂-MWCNT/CPE at <span id="cke_bm_695E" style="display: none;">&nbsp;</span>0.30 V and above the H<span id="cke_bm_701S" style="display: none;">&nbsp;</span>₂<span id="cke_bm_701E" style="display: none;">&nbsp;</span>O₂oxidation signal is rem<span id="cke_bm_702E" style="display: none;">&nbsp;</span>arkable in slightly alkaline media (pH 7.50), at pH 4.50 this electrode showed poor behavior and at pH 9.18 offered acceptable performance. LOQs were in the &micro;g mL -1 concentration&nbsp; range.&nbsp; H<span id="cke_bm_707S" style="display: none;">&nbsp;</span>₂<span id="cke_bm_707E" style="display: none;">&nbsp;</span>O₂was&nbsp; determined&nbsp; in&nbsp; a&nbsp; spiked&nbsp; milk&nbsp; sample&nbsp; by&nbsp; standard addition&nbsp; method after&nbsp; appropriate&nbsp; sample&nbsp; preparation&nbsp; (pH&nbsp; adjustment and&nbsp; centrifugation)&nbsp; and&nbsp; using&nbsp; optimized amperometric p<span id="cke_bm_708E" style="display: none;">&nbsp;</span>rocedure (acetate buffer pH 4.50, working potential -0.75 V) by Pt-MWCNT/CPE as a working electrode. RSD for three repeated measurements was 2.5%, while the recovery of the method was a bit higher than 71%. The&nbsp; composite&nbsp; materials&nbsp; consisting&nbsp; of&nbsp; MWCNT&nbsp; and&nbsp; Pd&nbsp; (Pd-MWCNT)&nbsp; or&nbsp; Pt&nbsp; containing particles&nbsp; (Pt-WCNT)&nbsp; were&nbsp; applied&nbsp; to&nbsp; the&nbsp; preparation&nbsp; of&nbsp; bulk- modified&nbsp; SPCEs&nbsp; (Pd-MWCNTSPCE and Pt-MWCNT-SPCE) and surface modifiedSPCE (Pd- MWCNT/SPCE). These electrodes, as well as unmodified SPCE and MWCNT-SPCE,&nbsp; were characterized by CV and&nbsp; amperometry&nbsp; in phosphate&nbsp; buffer&nbsp; solution&nbsp; of&nbsp; pH&nbsp; 7.50&nbsp; for&nbsp; the&nbsp; H<span id="cke_bm_713S" style="display: none;">&nbsp;</span>₂<span id="cke_bm_713E" style="display: none;">&nbsp;</span>O₂determination.&nbsp; Pd-MWCNT-SPCE&nbsp; and&nbsp; PdMWCNT/SPCEare convenient for the etermination of H 2O2 at working potentials from -0.50 to 0.50 V, and Pt-MWCNT-SPCE at investigated working potentials in the range from -0.80 to 0.70 V. These electrodes were then modified with glucose&nbsp; oxidase (GOx) by drop coating a solution of GOxand Nafion &reg; on their surface, whereby the applied amount of biococktail was optimized. GOx/PdMWCNT-SPCE&nbsp; showed&nbsp; better&nbsp; analytical&nbsp; performance&nbsp; for&nbsp; glucose&nbsp; determination&nbsp; in&nbsp; comparison with&nbsp; GOx/Pd-MWCNT/SPCE.&nbsp; The&nbsp; optimal&nbsp; working&nbsp; potential&nbsp; for&nbsp; GOx/Pd-MWCNT- SPCE&nbsp; was -0.40 V vs. SCE and <span id="cke_bm_714E" style="display: none;">&nbsp;</span>satisfactory linearity was obtained in the investigated glucose concentration range from 0.16 to 0.97 mmol L -1 (from 29.1 to 174&nbsp; &micro;g mL -1 ), hile the LOQ was 0.14 mmol L -1 (25 &micro;g mL -1 ). The optimized method based on GOx/Pd-MWCNT-SPCE was successfully applied to the determination of glucose in multifloral honey sample.&nbsp; The results are in a good agreement with those&nbsp; obtained by commercially available equipment for determination of glucose. Optimal working potential&nbsp; for&nbsp; GOx/Pt-MWCNT-SPCE&nbsp; was&nbsp; -0.50&nbsp; V&nbsp; vs.&nbsp; SCE,&nbsp; and&nbsp; the&nbsp;&nbsp; satisfactory&nbsp; linearity&nbsp; was obtained in the investigated concentration range ofglucose from 65.8 to 260.6&nbsp; &micro;g mL -1 , with LOQ of 35&nbsp; &micro;g mL -1 . The optimized method based on GOx/Pt- MWCNT-SPCE was successfully applied for determination of glucose in white grape and glucose tablets (Traubenzucker-bonbons) samples, whereby&nbsp; the&nbsp; obtained&nbsp; results&nbsp; were&nbsp; in&nbsp; a&nbsp; good&nbsp; agreement&nbsp; with&nbsp; the&nbsp; results&nbsp; obtained&nbsp; by&nbsp; Accu-Chek device. Based on the results, the developed analytical methods are first of all simple, reliable and suitable&nbsp; for&nbsp; obtaining&nbsp; fast&nbsp; information&nbsp; about&nbsp; the&nbsp; content&nbsp; of&nbsp; H ₂O₂ in&nbsp; different&nbsp; types&nbsp; of&nbsp; samples. Certainly the selection of a suitable working electrode, as well as the optimization of experimental conditions are key factors for the successful determination of H₂O₂.</p>