No description available.

Transition metal oxide thin films are commonly used in organic electronics devices to improve charge-injection between electrodes and organic semiconductors. Some oxides are good hole-injectors, while others are good electron-injectors. Transition metal oxides are materials with many diverse properties. Many transition metals have more than one stable oxidation state and can form more than one oxide. Each oxide possesses its own unique properties. For example, transition metal oxide electronic band structures can range from insulating to conducting. They can exhibit a wide range of work functions. Some oxides are inert, while others are catalytically active. Such properties are affected by numerous factors, including cation oxidation state and multiple types of defects. Currently it is not fully understood which oxide properties are the most important to their performance in organic electronics. In the present thesis, photoemission spectroscopy is used to examine how changes in certain oxide properties–such as cation oxidation states and defects—are linked to the oxide properties that are relevant to organic electronics devices—such as an oxide’s work function and electron band structure. In order to unravel correlations between these properties, we controllably change one property and measure how it changes affects another property. By performing such tests on a wide range of diverse transition metal oxides, we can discern broadly-applicable relationships. We establish a relationship between cation oxidation state, work functions and valence band structures. We determine that an oxide’s electron chemical potential relative to an organic’s donor and acceptor levels governs energy-level alignment at oxide organic interfaces. We establish how interfacial reactivity at electrode/oxide interfaces dictates an oxide’s work function and electronic structure near the interface. iii These findings demonstrate some of the very interesting fundamental relationships that exist between chemical and electronic properties at interfaces. These findings should assist in the future development and understanding of the functional interfaces of organic semiconductors and transition-metal oxides.

Metal oxide materials could offer earth-abundant, non-toxic alternatives to existing lightabsorber materials in thin-film photovoltaic and photoelectrochemical cells. However, efficiency of these devices based on existing metal oxides is typically low due to poor material properties. In this research, novel Sb:SnO2 nanorod and nanotube electron collectors have been synthesized, investigated and were used to improve the photo-conversion efficiency of top-performing BiVO4 photoelectrochemical cell. The performance of Sb:SnO2/BiVO4 photoanode achieved a new record for the product of light absorption and charge separation efficiencies (ηabs × ηsep) of ~ 57.3% and 58.5% under front- and back-side illumination at 0.6 VRHE and Sb:SnO2/BiVO4 PV cell achieved 1.22% solar power conversion efficiency. In addition, a new promising metal oxide material (CuBiW2O8) has been synthesized and its optoelectronic properties have been investigated to make photovoltaic cell which has potential to achieve over 30% solar power conversion efficiency.

The materials synthesised in this study were designed to have novel morphology coupled with a tightly controlled surface composition that could be varied depending on a application. Preparations with simple single metal oxides (i.e. TiO2, SiO2, Al2O3 and ZrO2) were used as the starting point with the latter stages involving multi-metal oxide coatings and materials. The research was divided into three interconnected areas; i) biotemplating, ii) alternative synthetic morphologies to biotemplating and iii) the synergy between microparticles and insecticides. For the investigation into biotemplating pollen was chosen as the main example due to its ubiquity. Here, good replication of its structure with metal oxides can be achieved by two-dimensional solgel chemistry. Such materials can be further modified to have tunable surface chemistry through dopants and optical properties (i.e. fluorescence) through the use of dyes. Materials were extensively characterised using primarily spectroscopy (UV and IR) and microscopy (i.e. SEM coupled with EDX elemental analysis). These were considered for several applications and examples investigated here included as a taggant technology and photocatalytic removal of methyl orange in an aqueous environment (TiO2-pollen only). For the latter, results have been compared with those of a commercially available alternative (P25) where the preliminary results are very promising. The method of overcoating was also shown to be transferrable to other flora and fauna biotemplates. Synthetic alternatives for the biotemplated pollen were considered in the second investigative area where solution sol-gel processes such as the Stöber method were considered in addition to other suspension based precipitation methods (i.e. refluxes and microemulsions). Processes developed in the biotemplating research were applied here and analysed again using spectroscopy and microscopy as the main techniques. As part of this aspect, a novel fast-drying water-in-oil microemulsion delivery and preparative system was also developed using low boiling point solvents such as isopentane and ethanol and low toxicity sucrose ester surfactants. Hollow oxide shells could be prepared in these using a novel low-temperature route that were comparable in thickness (but significantly smaller in size) to hollow pollen replicas. In this second area attention was shifted to more focus on oxides of Si and Al (as opposed to TiO2 that used extensively in biotemplating) to broaden the scope of the research and investigate other potential applications, such as nanoabrasives (surface roughness and ability to cleave DNA). The third and final area of interest used the materials from the previous two aspects in coatings that were applied to investigating the knockdown (KD) and total mortality (TM) of selected arthropods. Here mosquitoes of the A. Gambiae and S. Aegypti genus were considered with particular focus on synergistic effects with existing commercial insecticides (using mainly CDC bottle tests). Microscopy was used as the primary characterisation technique here to determine particle transfer after each assay. In these tests %TM suggested SiO2 microspheres were particularly effective at in enhancing mortality of the commercial l-cyhalothrin insecticide. Additionally, novel methods of recording mosquito behaviour was investigated through optical and thermographic stills and videos.

published_or_final_version / Chemistry / Doctoral / Doctor of Philosophy

No description available.

No description available.

Transition metal oxide thin films are commonly used in organic electronics devices to improve charge-injection between electrodes and organic semiconductors. Some oxides are good hole-injectors, while others are good electron-injectors. Transition metal oxides are materials with many diverse properties. Many transition metals have more than one stable oxidation state and can form more than one oxide. Each oxide possesses its own unique properties. For example, transition metal oxide electronic band structures can range from insulating to conducting. They can exhibit a wide range of work functions. Some oxides are inert, while others are catalytically active. Such properties are affected by numerous factors, including cation oxidation state and multiple types of defects. Currently it is not fully understood which oxide properties are the most important to their performance in organic electronics. In the present thesis, photoemission spectroscopy is used to examine how changes in certain oxide properties–such as cation oxidation states and defects—are linked to the oxide properties that are relevant to organic electronics devices—such as an oxide’s work function and electron band structure. In order to unravel correlations between these properties, we controllably change one property and measure how it changes affects another property. By performing such tests on a wide range of diverse transition metal oxides, we can discern broadly-applicable relationships. We establish a relationship between cation oxidation state, work functions and valence band structures. We determine that an oxide’s electron chemical potential relative to an organic’s donor and acceptor levels governs energy-level alignment at oxide organic interfaces. We establish how interfacial reactivity at electrode/oxide interfaces dictates an oxide’s work function and electronic structure near the interface. iii These findings demonstrate some of the very interesting fundamental relationships that exist between chemical and electronic properties at interfaces. These findings should assist in the future development and understanding of the functional interfaces of organic semiconductors and transition-metal oxides.

Thesis (Ph. D.)--Ohio State University, 2003. / Title from first page of PDF file. Document formatted into pages; contains xx, 180 p.; also includes graphics. Includes bibliographical references (p. 139-145).

No description available.