Supported metal oxides (SMOs) are important catalytic materials that find numerous applications in important industrial processes. Improving the structural properties of SMOs is a challenging objective due to material synthesis and characterization limitations. Recent developments in the characterization of SMOs, specifically tungstated zirconia (WO x /ZrO 2 ), have revealed structural information that renewed scientific interest in developing more sophisticated synthetic protocols for SMOs. The current work aims to provide a robust characterization of WO x /ZrO 2 by using different characterization techniques and probe reactions. Conventional and non-conventional synthetic methods are investigated to cover the whole spectrum of published methods in order to understand the properties and limitations of these techniques. In the second part of this work, a new synthetic approach is presented that successfully produces ultrasmall (smaller than 2 nm) tungsten oxide nanoparticles (WO x NPs). By using conventional tungsten precursors and oleylamine, WO x NPs are synthesized, characterized, and finally supported to test their propene metathesis activity. Conventional WO x /ZrO 2 catalysts were prepared and extensively studied by probing their n -pentane isomerization activity and methanol dehydration activity. WO x /ZrO 2 prepared via incipient wetness impregnation shows maximum n -pentane isomerization turnover rates ( TOR ) at intermediate surface densities ( � surf ). This method delivers the most active n -pentane isomerization WO x /ZrO 2 catalysts since it maximizes the number density of the active sub-nm slightly distorted Zr-WO x sites at � surf between 5.2-6.2 W/nm 2 . By comparing the n -pentane isomerization activity with the methanol dehydration activity of WO x /ZrO 2 , n -pentane isomerization is shown to be an excellent probe reaction for qualitatively identifying the relative (to the other species) population density of Zr-WO x clusters. Bimolecular n -pentane isomerization is the prevailing mechanism and requires a higher population density of Zr-WO x clusters than methanol dehydration. In the second part of this work, a new solvothermal synthesis route for the preparation of ultrasmall tungsten oxide nanoparticles (WO x NPs) is introduced. By using ammonium polyanionic salts and oleylamine, high yields (92±5%) of oleylaminecoated WO x NPs were consistently synthesized. The co-addition of an organic oxidant during the synthesis led to smaller WO x NPs thereby providing insight into the NP synthesis mechanism. Deposition and activation of the NPs on SiO 2 support by removal of oleylamine allows better control over the WO x domain size than conventional methods. Oleylamine suppresses WO x NP sintering during calcination and prevents the formation of larger polytungstates present in conventional catalysts. The supported WO x NPs were found to be up to 3 times more selective for metathesis products than conventionally prepared tungstated silica likely due to their controlled structure.

Transition metal oxides have been extensively studied during past decades. The purpose of this research was to synthesize new or little characterised transition metal oxides using high-pressure/high-temperature (HPHT) techniques. Various ternary vanadium oxides have been synthesised at ambient and high pressure conditions. All compounds have been studied by neutron and laboratory X-ray powder diffraction and magnetisation measurements. In some cases resistivity and synchrotron X-ray powder diffraction measurements were also carried out. The MnVO3 perovskite containing localized 3d5 Mn2+ and itinerant 3d1 V4+ states has been synthesised at 8 GPa and 1100°C. MnVO3 crystallises in Pnma space group (a = 5.2741(6) Å, b = 7.4100(11) Å, and c = 5.1184(8) Å at 300 K) and is metallic at temperatures of 2 – 300 K and at pressures of up to 67 kbar. Synchrotron X-ray powder diffraction study on the combined sample of several high pressure products showed slight variation in the stoichiometry of MnVO3. Incommensurate Mn spin order was discovered in the neutron powder diffraction measurements, which reveal a (0.29 0 0) magnetic vector below the 46 K spin ordering transition, and both helical and spin density wave orderings are consistent with the diffraction intensities. Electronic structure calculations show large exchange splittings of the Mn and V 3d bands, and (kx 0 0) crossings of the Fermi energy by spin up and down V 3d bands may give rise to Ruderman-Kittel-Kasuya-Yosida coupling of Mn moments, in addition to their superexchange interactions. The new compound CoVO4 has been discovered in a high pressure synthesis experiment. Magnetic susceptibility measurement, synchrotron X-ray and neutron powder diffraction studies were carried out. Refinements of the synchrotron X-ray and neutron data show CoVO4 to crystallise in space group Pbcn (a = 4.5012(2) Å, b = 5.5539(3) Å, and c = 4.8330(2) Å at 300 K (synchrotron X-ray data)). The magnetic susceptibility measurement reveals that Co3+ is most likely in a low spin state in CoVO4. Monoclinic brannerite type CoV2O6 was synthesised in ambient pressure. Neutron powder diffraction measurements were carried out and an antiferromagnetic order with an a x b x 2c supercell was observed below TN = 15 K. High spin Co2+ moments of magnitude 4.77(4) μB at 4 K lie in the ac plane and are ferromagnetically coupled within chains of edge-sharing CoO6 octahedra parallel to b axis. No structural transition is observed down to 4 K, but a magnetostriction accompanying antiferromagnetic order at TN = 15 K was discovered. A field-induced 1/3 magnetisation plateau and corresponding changes in the magnetic structure were studied by carrying out neutron powder diffraction measurements at 2 K in applied magnetic fields of 0, 2.5 and 5.0 T. Three collinear magnetic phases were observed as field increases; the above antiferromagnetic state with propagation vector (0 0 ½), a ferrimagnetic (¯⅓ 1 ⅓) phase, and a (0 0 0) ferromagnetic order. Co2+ moments of 4.4 - 5.0 μB have a large orbital component and are aligned close to the c-axis direction in all cases. Spin-lattice coupling leads to a magnetostriction and volume expansion as field increases. The ferrimagnetic phase accounts for the previously reported 1/3 magnetisation plateau, and demonstrates that monoclinic CoV2O6 behaves as an accidental triangular antiferromagnetic lattice in which further frustrated orders may be accessible. Orthorhombic columbite-type NiV2O6 and CoV2O6 compounds were synthesised at 6 GPa and 900°C. Metamagnetism and magnetic transitions were found in magnetic measurements. Powder neutron diffraction studies in zero and applied field were carried out. Both compounds were refined in space group Pbcn and the following lattice parameters were obtained at 300 K, CoV2O6: a = 13.4941(20) Å, b = 5.5736(9) Å, and c = 4.8082(8) Å and NiV2O6: a = 13.3725(17) Å, b = 5.5344(7) Å, and c = 4.8162(7) Å. Neutron powder diffraction studies in zero field did not reveal any magnetic peaks for either of the compounds but magnetic order emerges in applied fields between 1 and 4 T.

Doctor of Philosophy / Department of Chemistry / Kenneth J. Klabunde / Non-polar halogens (Cl2, Br2 and I2) and polar interhalogen molecules (ICl, IBr and ICl3) have been adsorbed on the surface of several high surface area materials, including three different nanosized metal oxides (NanoActive® (NA) Al2O3 Plus, NA-TiO2 and NA-CeO2). The prepared halogen and interhalogen adducts have been characterized in detail by thermogravimetric analysis (TGA), UV-Vis, Raman and X-ray photoelectron spectroscopies (XPS) and the results are discussed herein. The different metal oxides lead to varying strength of adsorption of the halogen/interhalogen in the prepared adducts and adsorption is stronger in the nanosized metal oxides as compared to their macrocrystalline available counterparts. Nanosized metal oxide halogen adducts possess high surface reactivities due to their unique surface morphologies. These adducts have been used as reactive materials against vegetative cells, such as Escherichia coli and Bacillus megaterium, as well as spores, including Bacillus subtilis and Bacillus anthracis (Δ Sterne strain). High biocidal activities against both Gram-positive and Gram-negative bacteria, as well as spores have been obtained. Bactericidal test procedures include a water suspension method and a dry membrane method and the results illustrate that good results are obtained using both procedures. Transmission electron micrographs have been used to illustrate the treated and untreated cells and spores, giving insight into the mechanism. It is proposed that the abrasive character of the particles, along with the oxidative power of the halogens/interhalogens as well as the electrostatic attraction between some of the metal oxides and the biological material are main reasons for the high biocidal activities. Three different bacteriophages (MS2, φX174 and PRD1) have also been studied and initial results indicate that there is big potential for the use of metal oxide halogen and interhalogen adducts for the destruction of viruses. Other potential uses for them also include halogenating agents in organic and inorganic synthesis as well as a safe way to store intact halogens.

Mimicking the biological olfactory systems that consist of olfactory receptor arrays with large surface area and massively-diversified chemical reactivity, three dimensional (3D) metal oxide nanowire arrays were used as the active materials for gas detection. Metal oxide nanowire arrays share similar 3D structures as the array of mammal's olfactory receptors and the chemical reactivity of nanowire array can be modified by surface coatings. In this dissertation, two standalone gas sensors based on metal oxide nanowire arrays prepared by microfabrication and in-situ micromanipulation, respectively, have been demonstrated. The sensors based on WO3 nanowire arrays can detect 50 ppb NO2 with a fast response; well-aligned CuO nanowire array present a new detection mechanism, which can identify H2S at a concentration of 500 ppb. To expand the material library of 3D metal oxide nanowire arrays for gas sensing, a general route to polycrystalline metal oxide nanowire array has been introduced by using ZnO nanowire arrays as structural templates. The effectiveness of this method for high performance gas sensing was first investigated by single-nanowire devices. The polycrystalline metal oxide coatings showed high performance for gas detection and their sensitivity can be further enhanced by catalytic noble metal decorations. To form electronic nose systems, different metal oxide coatings and catalytic decorations were employed to diversify the chemical reactivity of the sensors. The systems can detect low concentrated H2S and NO2 at room temperature down to part-per-billion level. The system with different catalytic metal coatings is also capable of discriminiating five different gases (H2S, NO2, NH3, H2 and CO).

To build novel electronic noses for mimicking biological olfactory systems that consist of olfactory receptor arrays with large surface area and massively-diversified chemical reactivity, three dimensional (3D) vertical aligned ZnO nanowire arrays were employed as active materials for gas detection. ZnO nanowire arrays share 3D structures similar to mammalian olfactory receptor arrays, with thousands of vertical nanowires providing a high reception area which can significantly enhance the sensors’ sensitivity. Meanwhile, with different material decorations (such as SnO2, In2O3, WO3 and polymers), each array of nanowires can produce a distinguishable response for each separate analyte, which would provide a promising way to improve the selectivity. Both patterned grown well-aligned and wafer size random-distributed 3D nanowire array sensing devices are investigated. Several different types of gas sensors have been investigated in this dissertation. Metal oxide semiconductor gas sensors based on 3D metal oxides/ZnO vertical nanowire arrays have detected NO2 and H2S down to ppb level, and five gases of NO2, H2S, H2, NH3, and CO have been discriminated. Active self-powered gas sensors based on 3D metal oxides/ZnO vertical nanowire arrays have been successfully fabricated and worked well for H2S and NO2 detection. With the decoration by mixture of PEDOT polymer with metal oxide nanoparticles, ZnO vertical nanowire array gas sensors have fast response and recovery time as well as good sensitivity to volatile organic gases of acetone, methanol and ethanol. A novel ionization sensor also has been built by ZnO vertical nannowire arrays, and this device could be able to ionize air under safety operation voltage.

This dissertation is directed towards the fundamental understanding of the controlled synthesis of noble-metal (silver, gold, and palladium) and metal oxide (manganese and copper oxide) nanostructures as well as their applications in heterogeneous and plasmonic catalysis. In the first part of this work (Section 1), we provided a general background concerning the science of controlled nanomaterials, their syntheses, properties, and applications in catalysis and plasmonic catalysis. Then, we describe and developed a series of protocols for the synthesis of these nanomaterials with controlled sizes and structures (spheres, cubes, rods, shells, flowers, dendrites, and tadpoles), mainly focusing on the mechanistic understanding of their formation and how physical and chemical parameters (size, shape, composition, surface morphology) may influence/modify their catalytic properties (Sections 2 and 3). In Section 4, we turned our attention for the design of simple protocols for the synthesis of advanced nanomaterials that are interesting for green catalytic transformations applications. In this case, we envisioned the use of MnO2-Au nanomaterials (nanowires and nanoflowers) displaying several properties (unique pore structure, high surface area, ultrasmall Au NPs at the surface, high concentration of oxygen vacancies and Auδ+ species, strong metal-support interactions, and uniform shapes and sizes) that are desirable for catalyzing a series of green oxidation reactions in mild conditions (low temperatures and molecular oxygen or atmospheric air as the oxidants). In Section 5, we have demonstrated that catalysis and optical properties can be merged together to improve catalytic processes, the so called-plasmonic catalysis. This allowed us the use of visible light as the energy input to drive chemical transformations in mild conditions and then provide new insights regarding the various factors that affect SPR-mediated catalytic activities in plasmonic nanostructures. Finally, in Section 6, we focused our attention on how important is to introduce both nanoscience and the synthesis/characterization of nanomaterials having controlled physicochemical features to undergraduate students. Specifically, we have described simple laboratory experiments for the synthesis of nanomaterials (gold nanospheres and Cu(OH)2/CuO nanowires) displaying uniform sizes and shapes in order to investigate and explain their optical properties, catalytic activities and formation mechanisms. / Não consta resumo na publicação.

A simple bottom-up-based synthetic strategy named a solvothermal technique is introduced as the primary synthetic approach and its crystal growth mechanism is scrutinized. N-type cobalt-doped ZnO-based DMS nanocrystals are employed as a model system, and characterized by a broad spectrum of advanced microscopic and spectroscopic techniques. It is found that the self-orientation growth mechanism, imperfect oriented attachment, is intimately correlated with the high-temperature ferromagnetism via defects. The influence of processing on the magnetic properties, such as compositional variations, reaction conditions, and post-growth treatment, is also studied. In this way, an in-depth understanding of processing-structure-property interrelationships and origins of magnetism in DMS nanocrystals are obtained in light of the theoretical framework of a spin-split impurity band model. In addition, a nanoscale spinodal decomposition phase model is also briefly discussed. / Following the similar synthetic route, copper- and manganese-doped ZnO nanocrystals have been synthesized and characterized. They both show high-temperature ferromagnetism in line with the aforementioned theoretical model(s). Moreover, they display interesting exchange biasing phenomena at low temperatures, revealing the complexity of magnetic phases therein. / Spintronics (spin transport electr onics), in which both spin and charge of carriers are utilized for information processing, is believed to challenge the current microelectronics and to become the next-generation electronics. Nanostructured spintronic materials and their synthetic methodologies are of paramount importance for manufacturing future nanoscale spintronic devices. This thesis aims at studying synthesis, characterization, and magnetism of transition-metal-doped zinc oxide (ZnO) nanocrystals---a diluted magnetic semiconductor (DMS)---for potential applications in future nano-spintronics. / The crystal growth strategy demonstrated in this work not only provides a more convenient approach to directly tailor magnetic properties of advanced multifunctional spintronic materials on a nanometer scale but also contributes to a deeper insight into the microscopic origin of magnetism in wide-band-gap oxide DMSs. / Wang, Xuefeng. / "August 2007." / Adviser: J. B. Xu. / Source: Dissertation Abstracts International, Volume: 69-02, Section: B, page: 1230. / Thesis (Ph.D.)--Chinese University of Hong Kong, 2007. / Includes bibliographical references. / Electronic reproduction. Hong Kong : Chinese University of Hong Kong, [2012] System requirements: Adobe Acrobat Reader. Available via World Wide Web. / Electronic reproduction. [Ann Arbor, MI] : ProQuest Information and Learning, [200-] System requirements: Adobe Acrobat Reader. Available via World Wide Web. / Abstract in English and Chinese. / School code: 1307.

This dissertation is directed towards the fundamental understanding of the controlled synthesis of noble-metal (silver, gold, and palladium) and metal oxide (manganese and copper oxide) nanostructures as well as their applications in heterogeneous and plasmonic catalysis. In the first part of this work (Section 1), we provided a general background concerning the science of controlled nanomaterials, their syntheses, properties, and applications in catalysis and plasmonic catalysis. Then, we describe and developed a series of protocols for the synthesis of these nanomaterials with controlled sizes and structures (spheres, cubes, rods, shells, flowers, dendrites, and tadpoles), mainly focusing on the mechanistic understanding of their formation and how physical and chemical parameters (size, shape, composition, surface morphology) may influence/modify their catalytic properties (Sections 2 and 3). In Section 4, we turned our attention for the design of simple protocols for the synthesis of advanced nanomaterials that are interesting for green catalytic transformations applications. In this case, we envisioned the use of MnO2-Au nanomaterials (nanowires and nanoflowers) displaying several properties (unique pore structure, high surface area, ultrasmall Au NPs at the surface, high concentration of oxygen vacancies and Auδ+ species, strong metal-support interactions, and uniform shapes and sizes) that are desirable for catalyzing a series of green oxidation reactions in mild conditions (low temperatures and molecular oxygen or atmospheric air as the oxidants). In Section 5, we have demonstrated that catalysis and optical properties can be merged together to improve catalytic processes, the so called-plasmonic catalysis. This allowed us the use of visible light as the energy input to drive chemical transformations in mild conditions and then provide new insights regarding the various factors that affect SPR-mediated catalytic activities in plasmonic nanostructures. Finally, in Section 6, we focused our attention on how important is to introduce both nanoscience and the synthesis/characterization of nanomaterials having controlled physicochemical features to undergraduate students. Specifically, we have described simple laboratory experiments for the synthesis of nanomaterials (gold nanospheres and Cu(OH)2/CuO nanowires) displaying uniform sizes and shapes in order to investigate and explain their optical properties, catalytic activities and formation mechanisms. / Não consta resumo na publicação.

Neste trabalho calculamos inicialmente as propriedades ópticas de filmes compósitos de Me-NiO e Me-CoO, sendo os metais Me = Au, Ag, Cu, Ni, Pd e Pt, a partir da teoria de meio efetivo de Maxwell Garnett. Este estudo teórico possibilitou avaliar a viabilidade de se obter experimentalmente um material colorido na região do espectro visível, com absorção seletiva numa estreita faixa de comprimentos de onda. Os resultados mostraram que o candidato ideal para tal fim é o compósito a base de Au. A partir deste resultado iniciou-se o crescimento de filmes finos compósitos de Au-NiO e Au-CoO, utilizando diferentes estratégias experimentais: (i) deposição por DC magnetron sputtering reativo, (ii) deposição do filme de NiO, por DC magnetron sputtering reativo e Au pelos métodos de sol-gel e dip coating e (iii) deposição de ambos os filmes, NiOxHy e Au, por sol-gel e dip coating. Os resultados mostraram uma seletividade pequena (-5-10%) nos filmes crescidos pelo método de sputtering, devido ao caráter atomístico desse tipo de técnica, que conduz à formação de pequenos aglomerados de Au (menores que -3 nm), ao invés de agregados com tamanhos da ordem de algumas dezenas de nanômetros, obtidos facilmente pelo método sol-gel. O crescimento na forma de multicamadas proporciona uma melhor seletividade, em torno de 1 5%. Pós-tratamentos térmicos em filmes compósito s obtidos unicamente por sputtering induzem a aglomeração do Au, mas destroem as propriedades eletrocrôrnicas. No caso de filmes de Au crescidos por sol-gel, a seletividade espectral, decorrente da presença do Au aumenta, indo de 15% a 20% em filmes depositados sobre a matriz óxida crescida por sputtering e por sol-gel, respectivamente. Mediante processos eletroquímicos, os filmes de NiOxHy crescidos por sol-gel e dip coating apresentaram os melhores resultados de variação de transmitância (70%), devido à maior porosidade desses filmes. / In this work we initially calculated the optical properties of cermet films of Me-NiO and Me-CoO, being the metals Me = Au, Ag, Cu, Ni, Pd and Pt, by means of the Maxwell Garnett effective medium theory. This theoretical study allowed evaluating the viability to obtain, experimentally, a colored material in the visible spectrum region, with selective absorption in a narrow range of wavelengths. The results showed that the ideal candidate for such goal is the Au cermet. Looking at this result, the growth of Au-NiO and Au-CoO thin films was initiated using different experimental strategies: (i) deposition by reactive DC magnetron sputtering, (ii) deposition of the NiO, film by reactive DC magnetron sputtering and Au by the sol-gel and dip coating methods and (iii) deposition of both films, NiOxHy and Au, by sol-gel and dip coating. The films grown by sputtering showed a small selectivity (-5-10%), due to the atomistic character of this type of technique. It leads to the formation of small clusters of Au (smaller than -3 nrn), instead of aggregates with sizes of the order of some tenths of nanometers, easily obtained by the sol-gel method. Better selectivity, around 15%, is obtained in films deposited as multilayers. Post thermal annealing of the cermet films grown by sputtering induces the agglomeration of Au, but destroys the electrochromic properties. In the case of Au films grown by sol-gel, the spectral selectivity increases, due to the presence of Au, going from 15% to 20% in films deposited on the oxide matrix, deposited by sputtering and sol-gel, respectively. Under electrochemical processes, the NiOxHy films grown by sol-gel and dip coating presented the highest transmission variation (70%), due to larger porosity of these films.

Nanostrukturierte Materialien zeichnen sich dadurch aus, dass sie aus sehr kleinen Baueinheiten zusammengesetzt sind. Typischerweise liegt die Grössenordnung dieser Bausteine im Bereich von einigen Nanometern. Ein Nanometer entspricht 10-9 Meter. Dadurch bekommen nanostrukturierte Materialien oft verbesserte, vielfach sogar ganz neue Eigenschaften, die für viele heutige wie auch zukünftige Anwendungen von Vorteil sind.<br /> <br /> Ein Weg, um solche nanostrukturierte Materialien herzustellen, ist die sogenannte &bdquo;Templatierungsmethode&ldquo;. Das Templat besteht aus einem einzelnen Molekül, einer Ansammlung von Molekülen oder aus einem festen Objekt. Beim Aufbau des nanostrukturierten Materials wirkt das Templat als Schablone oder als Gussform und beeinflusst damit die Struktur des Endproduktes. Normalerweise besteht dieser Prozess aus mehreren Schritten. Zuerst wird der Raum um das Templat mit dem Ausgangsstoff umhüllt oder ausgefüllt, dann wird der Ausgangsstoff chemisch in das gewünschte Endprodukt umgewandelt, wobei das Templat die Endform kontrolliert und am Schluss wird das Templat entfernt. Das geschieht meistens durch Erhitzen. Als Ausgangsstoff können dabei einzelne Moleküle verwendet werden, die sich leicht in das Endprodukt umwandeln lassen, oder aber vorgeformte Partikelchen, die nur noch zur entsprechenden Form angeordnet werden müssen.<br /> <br /> In dieser Arbeit wurden poröse Metalloxid-Kügelchen hergestellt, die aus einem Gemisch aus Titanoxid und entweder Aluminium-, Gallium- oder Indiumoxid bestehen. Als Template wurden poröse Kunststoffkügelchen eingesetzt, die man sonst für Chromatographiezwecke braucht. Bei der Synthese wurden die Poren der Kunststoffkügelchen mit dem Ausgangsmaterial gefüllt und mit Wasser in ein amorphes Netzwerk umgewandelt. Danach werden die Kügelchen erhitzt, wobei das Kunststofftemplat zersetzt wird. Gleichzeitig wird das amorphe Gerüst in stabile, kristalline Wände umgewandelt, die die Form der Kügelchen auch dann noch behalten, wenn das Templat verschwunden ist. Mit einem ähnlichen Prozess wurden auch Kügelchen aus Cer-Zirkonoxid erhalten. Als Ausgangsstoff wurden dabei aber vorgeformte Cer-Zirkonoxid-Nanopartikel eingesetzt, die in die Poren der Kunststofftemplatkügelchen hinein diffundieren. Diese Cer-Zirkonoxid-Nanopartikel lassen sich auch für die Herstellung von porösen Pulvern verwenden, wobei dann nicht Polymerkügelchen, sondern hochgeordnete Ansammlungen von Block Copolymeren als Template verwendet werden.<br /> <br /> Form, Struktur und Eigenschaften all dieser Materialien wurden systematisch unter Anwendung verschiedenster Analysemethoden untersucht. Die auf Titanoxid-basierten Kügelchen wurden auch auf ihre photokatalytische Verwendung zum Abbau von umweltschädlichem 2-Chlorophenol untersucht. Die Cer-Zirkonoxid-Kügelchen wurden für die Herstellung von Wasserstoff aus Methanol getestet. Wasserstoff gilt als hoffungsvoller, sauberer Energieträger der Zukunft und kommt in Brennstoffzellen zum Einsatz. / Nanostructured materials are the materials having structural features on the scale of nanometers i.e. 10-9 m. the structural features can enhance the natural properties of the materials or induce additional properties, which are useful for day to technology as well as the future technologies<br /> <br /> One way to synthesize nanostructured materials is using templating techniques. The templating process involves use of a certain &ldquo;mould&rdquo; or &ldquo;scaffold&rdquo; to generate the structure. The mould is called as the template, can be a single molecule or assembly of molecule or a larger object, which has its own structure. The product material can be obtained by filling the space around the template with a &ldquo;precursor&rdquo;, transformation of precursor into the desired material and then removal of template to get product. The precursor can be any chemical moiety that can be easily transformed in to the desired material. Alternatively the desired material is processed into very tiny bricks or &ldquo;nano building blocks (NBB)&rdquo; and the product is obtained by arrangement of the NBB by using a scaffold. <br /> <br /> We synthesized porous metal oxide spheres of namely TiO2-M2O3: titanium dioxide- M-oxide (M = aluminum, gallium and indium) TiO2-M2O3 and cerium oxide-zirconium oxide solid solution. We used porous polymeric beads as templates. These beads used for chromatographic purposes. For the synthesis of TiO2-M2O3 we used metal- alkoxides as precursor. The pore of beads were filled with precursor and then reacted with water to give transformation of the precursor to amorphous oxide network. The network is crystallized and template is removed by heat treatment at high temperatures. In a similar way we obtained porous spheres of CexZr1-xO2. For this we synthesized nanoparticle of CexZr1-xO2 and used then for the templating process to obtain porous CexZr1-xO2 spheres. <br /> <br /> Additionally, using the same nanoparticles we synthesized nano-porous powder using self-assembly process between a block-copolymers scaffold and nanoparticles. <br /> <br /> Morphological and physico-chemical properties of these materials were studies systematically by using various analytical techniques <br /> <br /> TiO2-M2O3 material were tested for photocatalytic degradation of 2-Chlorophenol a poisonous pollutant. While CexZr1-xO2 spheres were tested for methanol steam reforming reaction to generate hydrogen, which is a fuel for future generation power sources like fuel cells. All the materials showed good catalytic performance.