The two stage Lucite Alpha Process for the industrial manufacturing of methyl methacrylate (MMA) represents one of the most efficient technologies currently available for the large scale production of this important chemical commodity. The second stage of this process, which involves the condensation of methyl propanoate (MeP) with formaldehyde over a heterogeneous fixed bed catalyst, however, still shows great scope for improvement. Herein the development of a novel homogeneous catalytic system that would promote the condensation of either propanoic acid or MeP with formaldehyde is explored. Since C–C bond forming reactions which proceed via C–H activation pathways typically display high atom efficiency, our efforts were particularly focussed on employing a functionalisation strategy that is mediated by C–H activation. In the case of propanoic acid, the possibility of achieving regioselective α-methylenation by linking the substrate to phosphorus was evaluated. Thus, a series of acyloxyphosphines and acylphosphites derived from either propionic acid or phenylacetic acid was prepared and, where stability allowed, fully characterised. Some of the resultant simple mixed anhydrides posed problems relating to their stability, and the stabilisation of such ligand systems by using electronic and / or steric effects was therefore explored. In addition, the coordination chemistry and in solution behaviour of Rh(I) and Ru(II) complexes containing these ligands was examined. Similar to the free ligands, complexes derived from these mixed anhydrides rearranged in solution via a number of decomposition pathways, with the specific pathway dependent on the nature of the auxiliary ligands. For most of these complexes, however, ligand decarbonylation was the route of preference for decomposition. Despite the instability of these complexes, a selection of Rh(I) mixed anhydride complexes were assessed for their potential as C-H activation catalysts in reactions aimed at the α-methylenation of saturated carboxylic acids. Furthermore, the stabilisation of Rh(I) mixed anhydride complexes with chelating auxilary ligands, such as bisphosphines or N-substituted diphosphinoamines, was explored. In particular, a series of new Rh(I) mixed anhydride complexes containing dppe, dppb and dppbz as secondary ligands were prepared and the effects of these secondary ligands on the in solution stability of these complexes assessed. As MeP represents the final product in the first stage of the Alpha process and not propanoic acid, the utilisation of PNP iridium pincer complexes in the regioselective sp³ C–H activation of MeP and related esters was also examined. The factors that govern the regioselectivity of such reactions were of great interest to us and, in particular, the effects of water on the reactivity and regioselectivity of these reactions were explored. For MeP, preferential C–H activation of the methoxy group was found to proceed under anhydrous conditions and the catalytic functionalisation of this site with ethene using this activation approach was considered. Formaldehyde, employed in the second stage of the Alpha process, is a difficult substance to manufacture and handle, especially on a large scale. A preliminary study on the in situ production of anhydrous formaldehyde via the catalytic dehydrogenation of methanol was therefore performed. During this study, catalytic systems based on carbonate salts and / or transition metal complexes were considered. In the hope of reducing the number of steps required in the production of MMA, a new one-pot cascade reaction for the indirect α-methylenation of MeP with methanol was developed. Although the production of MMA using this system only proceeded with low efficiency, the obtained results serve as an important proof of concept for future developments in this area. Finally, the capacity of a series of simple bases to catalyse the condensation of MeP with formaldehyde was assessed as part of a fundamental study directed towards determining the factors that govern the efficiency of this reaction. In addition, the extent to which each base effects the deprotonation in the α-position of MeP was determined with the aid of deuterium labelling experiments. Similarly, using sodium propanoate as model base a rough estimate of the kinetics of deprotonation could be made based on the degree of deuterium incorporation over time. These studies suggested that the low efficiency of this condensation reaction is not caused by ineffective deprotonation but rather by the weak nucleophilicity of the generated carbanion. For this reason, attempts to increase the electrophilicity of formaldehyde through Mannich-type condensations reactions involving secondary amine and carboxylic acid additives were made.

Cette thèse comprend deux parties distinctes, dans lesquelles seront décrits tout d’abord, le développement d’un procédé multicatalytique en un seul pot d’une réaction de méthylénation suivie d’un couplage de Heck, puis dans un second temps, une étude vers la synthèse de l’Hodgsonox. Le premier thème de la thèse correspond à la mise en place d’un procédé en un seul pot, basé sur la méthodologie de méthylénation catalysée par un métal de transition, développée au sein du groupe du Pr. Lebel, et sur des couplages de Heck. Différentes études de compatibilité des réactifs mis en présence sont abordées, ainsi que le choix des conditions optimales (Pd(OAc)2 et P(o-tol)3) pour la réalisation d’un tel système qui ne requiert aucun isolement du produit intermédiaire. Il a été démontré que la présence de triphénylphosphine en excès inhibe la réaction de couplage de Heck, ce qui a finalement orienté notre choix vers les sels de cuivre pour la catalyse de la réaction de méthylénation. Le tandem séquentiel a ensuite été appliqué à la synthèse de divers stilbènes, notamment des composés dérivés du Resvératrol, molécule d’intérêt thérapeutique pour les maladies cardiovasculaires, et à la synthèse d’indanes substitués, avec un couplage intramoléculaire, avec de bons rendements. La deuxième partie de cette thèse traite de l’étude menée vers la synthèse de l’Hodgsonox. Cette molécule correspond à une nouvelle classe de sesquiterpènes tricycliques, comportant un dihydropyrane doté d’une fonction éther diallylique. Cette molécule représente un défi synthétique pour le groupe du Pr. Lebel, qui envisage de synthétiser les deux doubles liaisons terminales au moyen de la méthodologie de méthylénation développée au sein du groupe. L’Hodgsonox, dont la biosynthèse utilise la voie MEP, a un potentiel insecticide pour la croissance de la larve de la mouche verte d’Australie, Lucilia cuprina. La synthèse envisagée au cours de ces travaux est basée sur la formation préalable d’un cycle à 5 chaînons, comportant 3 centres stéréogéniques, puis sur la cyclisation du cycle pyranique au moyen d’une réaction d’insertion dans un lien O H. Un dédoublement cinétique dynamique sur une δ butyrolactone substituée permet de fixer la stéréochimie relative de deux centres chiraux dès la première étape. Le cycle à 5 chaînons est ensuite formé par métathèse après 6 étapes avec un rendement de 37%. Une addition conjuguée suivie d’une réaction de Saegusa et d’une réaction d’hydrosilylation introduit le groupement isopropyle de manière syn. Après mise en place d’un groupement céto-ester, un transfert de groupement diazonium permet de préparer le précurseur pour la réaction d’insertion dans un lien O-H. Le bicycle correspondant à la structure de base de l’Hodgsonox a été préparé au moyen de 16 étapes linéaires avec un rendement global de 12%. / This thesis is divided in two sections. The first topic to be discussed is the development of a multicatalytic one pot process of methylenation and Heck coupling reactions, and the second topic is the studies toward the synthesis of Hodgsonox. The first part of this thesis describes the development of a one pot process, based on the transition-metal catalyzed methylenation reaction reported by the Lebel group, and on Heck coupling reactions. The compatibility of reagents is studied and the optimal reaction conditions of the coupling reaction (Pd(OAc)2 et P(o tol)3) are described for this process, which does not require isolation of the alkene intermediate. The presence of excess triphenylphosphine inhibits the Heck coupling reaction, thus copper salts are used to catalyze the methylenation reaction. This tandem sequence was then used to synthesize different stilbenes, particularly hydroxylated (E) stilbenoids, analogues of Resveratrol, which are known to have a therapeutic activity against cardiovascular diseases, and substituted indanes, through an intramolecular Heck coupling reaction, all in good yields. The second part of this thesis describes the studies toward the synthesis of Hodgsonox. This molecule represents a new class of sesquiterpene with a cyclopenta[5,1-c]pyran ring system fused to an epoxide ring. The combination of a mono- and a 1,1-disubstituted double bond flanking the oxygenated carbon of the pyran ring is a unique structural feature, making the synthesis of this molecule a very attractive challenge. Hodgsonox also represents a good system to test the versatility of our metal-catalyzed methylenation reaction, since we propose to use this methodology to construct the two terminal alkenes from a dicarbonyl derivative. Hodgsonox, which is biosynthesized by the MEP pathway, exhibits activity against the larvae of the Australian green blowfly Lucilia cuprina. The synthesis planned during this work, is based on the prior formation of a 5-membered ring, with 3 stereogenic centers, followed by an O-H insertion reaction to cyclize the dihydropyran ring. A dynamic kinetic resolution of a substituted δ butyrolactone determines the relative stereochemistry of two chiral centers in the first step. The 5 membered cycle is then synthesized via a cross metathesis reaction, after 6 steps and a 37% global yield. A conjugated addition, followed by a Saegusa oxidation reaction and a hydrosilylation reaction gave the syn isopropyl group. After the formation of the ketoester functionality, a diazo transfer allows us to prepare the presursor for the OH insertion reaction. The bicycle, corresponding to the structural base of the Hodgsonox, was prepared in 16 linear steps in a 12 % global yield.