“Nanomaterials” is a generic term used to describe nano-sized crystals and bulk homogenous materials with a structural disorder at the nanoscale. Ancient (and modern) ceramics and glasses derive some of their properties (eg. pliability and low sintering temperature) from the fact that their raw material namely natural clay is nanosized. Furthermore the pigments used to colour ceramics and glasses need to have particle sizes <500 nm for the object to appear homogenously coloured to the human eye. Raman spectroscopy intrinsically probes chemical bonds and is therefore one of the few techniques that has been proven useful to provide information at the nanoscale. It is an excellent tool to study ceramics and glasses as a Raman spectrum can be used to identify phases, analyse amorphous domains in the silicate network and identify pigments on a nano-scale. The characteristics of a glass, ceramic or ceramic glaze derived through its Raman spectrum can then be linked to the technology used to produce an artefact and in this way provide information about its relative age and provenance. Likewise, the identification of pigments and binders in San rock art might provide information about production techniques and assist in the developement of conservation procedures. In this thesis micro-Raman spectroscopy (with X-ray fluorescence, X-ray powder diffraction, electronmicroscopy and photoluminescence as supportive techniques) was utilised to study archaeological artefacts from the Mapungubwe Collection and San rock art. It was possible to re-date celadon shards excavated on Mapungubwe hill in 1934 to the Yuan or even later Ming dynasty in stead of its original classification as Song. A profile of the glass technology used to produce the Mapungubwe oblates, small trade beads from the “royal burials” on Mapungubwe hill was determined and quite a few unique characteristics of the beads may eventually help to establish their provenance. The possible influence of the presence of rock hyraces at rock art sites on the deterioration of rock art were investigated and during the study very rare polymorphs of CaCO3 (vaterite and monohydrocalcite) were discovered in rock hyrax urine. This study was extended to analyse a San rock art fragment and another first was the identification of animal fat on the fragment, but the exact origin of the fat has to be verified by similar experiments. / Thesis (PhD)--University of Pretoria, 2009. / Physics / unrestricted

A series of studies on monomer to polymer conversion in adhesive systems was undertaken using micro-Raman spectroscopy. A database of micro-Raman spectra was compiled for identification of tooth tissues and materials. The degree of conversion was assessed as a function of time and light source. Linear and two-dimensional micro- Raman characterisations of the adhesive-dentine and resin-based composite-adhesivedentine interfaces were performed. The degree of monomer to polymer conversion of adhesive systems was correlated with the amount of eluted monomers obtained by highperformance liquid chromatography. The degree of conversion varied significantly depending on adhesive chemical composition, curing time and light source. It was impossible to specify one curing time applicable to all adhesive systems, due to differences in conversion kinetics. In general, conventional halogen light-curing units at twenty seconds curing time produced similar or higher degree of conversion in adhesive systems compared to high-power LED units at ten seconds. Significantly higher monomer conversion was found in the adhesive layer compared to the hybrid layer in both etch-and-rinse and self-etch systems. Etch-and-rinse adhesive systems formed thicker hybrid layers compared to self-etch systems. Micro-Raman spectroscopy gave a more precise indication of dentine demineralisation and adhesive penetration than scanning electron microscopy and indicated that the hybrid layer is a gradual transitional zone between the adhesive layer and un-affected dentine. The absolute amount and weight percent of eluted monomers varied in all tested adhesive systems. In most adhesive systems, more than 90% of eluted monomers were detected within the first one hour of immersion. Overall, no correlation was found between the degree of conversion and the amount of eluted monomers.

Compte tenu de leur bioactivité et de leur ostéoconduction, les revêtements d’hydroxyapatite (HA) favorisent le développement de tissu osseux et contribuent à l’adhérence et à la prolifération des cellules osseuses tout en préservant l’intégrité mécanique du dispositif métallique de l’implant. Toutefois, des signes de résorption de cette couche ont été constatés et l’introduction du procédé de projection plasma pour la réalisation de dépôts d’HA a donné lieu à plusieurs controverses. Certaines études ont montré que les dépôts d’HA par projection plasma présentent une mauvaise adhérence sur le titane, une dégradation et écaillage avec le temps. Ce phénomène est attribuable à la décomposition de l'HA au cours de la projection et à l'existence de phases secondaires cristallisées ou amorphes qui fragilisent le dépôt. A l’heure actuelle, les recherches de nouvelles apatites thermiquement plus stables se développent. Ainsi des dépôts à base de fluorapatite ou de fluorhydroxyapatite fournissent des dépôts plus stables et plus adhérents. Il existe d’autres formes d’apatites comme la chlorapatite (ClA) qui fond sans se décomposer ce qui permettrait d’éviter la formation des phases étrangères qui provoquent l’écaillage du dépôt. Ce travail porte sur la synthèse et la caractérisation de phosphates de calcium apatitiques destinés au recouvrement de prothèses ostéoarticulaires et/ou d’implants dentaires métalliques. L’élaboration des poudres d’apatite a été réalisée par réaction solide-solide, en solution aqueuse ou en sel fondu. Plusieurs apatites ont été étudiées : la fluorapatite, la fluorhydroxyapatite, la chlorapatite et l’apatite calcostrontique. On obtient des poudres pures, bien cristallisées et stoechiométriques. Nous avons ensuite étudié la stabilité thermique des poudres d’apatite par analyse thermogravimétrique. La stabilité thermique de la ClA et sa fusion sans décomposition permettent d’obtenir des dépôts sans phases secondaires avec un taux de cristallinité élevé. Parmi toutes les poudres étudiées, nous avons choisi de sélectionner la chlorapatite pour la suite de l’étude ainsi que l’hydroxyapatite comme référence. La poudre de ClA est déposée sur un substrat en titane via une mini-torche plasma mobile à basse énergie, conçue pour les implants dentaires ou orthopédiques de petites tailles et de géométries complexes. La projection par la mini-torche plasma permet de réaliser des dépôts fins et adhérents. Les propriétés structurales et microstructurales des dépôts de ClA et d’HA effectués dans les mêmes conditions ont été évaluées par diffraction des rayons X, spectroscopies FTIR et Raman. L’analyse des revêtements de ClA et d’HA par diffraction des rayons X atteste de la présence d’une seule phase cristalline. Néanmoins, le rapport de cristallinité des dépôts de ClA est largement supérieur à celui des dépôts d’HA, pour lesquels le rapport de cristallinité est supérieur à la norme requise. Ce résultat est du à la stabilité thermique de la ClA par rapport à l’HA. Les spectroscopies FTIR et Raman montrent la présence d’un faible taux de phase amorphe et d’oxyapatite. Nous avons également développé une nouvelle méthode semi-quantitative par cartographie Raman permettant de déterminer l’homogéneité de composition du dépôt. Enfin, nous avons montré que l’adhérence des dépôts de ClA au substrat déterminée suivant la norme ASTM C633 est équivalente à celle de l’HA. La réponse biologique des dépôts a été étudiée in vitro avec des cellules pré-ostéoblastes humaines sur les deux compositions ClA et HA. Les tests montrent que quelle que soit la composition du dépôt, la prolifération cellulaire augmente au cours du temps d’incubation. Une étude in vivo a été menée sur un modèle animal ovin en site fémur et humérus pour des durées de 2 et 6 mois afin d’évaluer le potentiel ostéoconducteur des dépôts d’HA et de ClA. Aucune réaction inflammatoire n’a été observée et l’interprétation des résultats d’analyses histologiques et physico-chimiques est en cours. / Plasma-sprayed hydroxyapatite (HA) has been shown to enhance bone apposition as compared with uncoated metal implants. In spite of their good clinical performances, implant bio-integration is still limited due to the poor adhesion of HA-coating on the titanium surface and the decomposition of HA into several foreign phases during plasma spray. The plasmaspray process was thus considered not to be optimum for HA coatings. To circumvent these disadvantages, other types of calcium phosphates have been proposed to replace HA, such as tricalcium phosphate or biphasic calcium phosphate with little improvement. Chlorapatite (ClA) however has never been tested despite its ability to melt without decomposition which could be a decisive advantage to avoid apatite decomposition and could increase coating crystallinity. This work concern the synthesis and the characterization of apatitic calcium phosphate as coating for endoprostheses and dental implants. The syntheses of the different apatite powders were performed by solid-solid reaction, in aqueous solution or by molten salt reaction. Several apatites were studied: fluorapatite, fluorhydroxyapatite, chlorapatite and strontium substituted apatite. The as-synthesized powders are pure, well crystallized and stoechiometric. The thermal properties of apatite powders were compared using thermogravimetric analysis. The thermal stability of ClA and its melting without decomposition allows to obtain deposits with no secondary phases and with a degree of crystallinity close to 100 %. We have therefore chosen ClA and HA as feedstock powders to achieve coatings. The as-synthesized ClA powder was deposited on a titanium substrate using a novel low energy plasma mini-gun characterized by a low power range (<13 kW) and portability allowing in-situ coating deposition designed for dental and orthopedic small implants with complex geometry. The plasma spray with the mini-gun gives thin and adherent coatings. It also provides economic benefits such as low energy and a higher yield of feedstock powder than conventional gun. The structural and microstructural properties of ClA and HA coatings performed under the same conditions were evaluated by X-ray diffraction, Raman and infrared spectroscopy. X-ray diffraction analyses on the ClA and HA coatings indicate the presence of crystalline apatite as the only crystalline phase. However, the crystallinity ratio of ClA coatings was much higher than that of HA coatings but superior to the required standard in both cases. This difference is due to the thermal stability of ClA powder. IR and Raman spectroscopy shows the presence of low levels of amorphous phase and oxyapatite. We have also developed a new semiquantitative method by Raman imaging in order to determine coating homogeneity. The mechanical properties of coatings were determined according to the standard test measurements ASTM C633. The adhesion of ClA coatings to the substrate is equivalent to HA coatings. The biological response of the coatings was studied in vitro with human preosteoblast cells on both ClA and HA coatings. Tests show that wathever the composition of coating, cell proliferation increases with time of incubation. The in vivo osteoconductive properties of coatings were studied in femur and humerus sites of an ovine animal model during 2 and 6 months. No inflammatory reaction has been observed and the interpretation of histological and physico-chemical results is in progress.

Materiais vítreos com propriedades similares às do cristal germanato de bismuto de composição Bi4Ge3O12, material cintilador que possui estrutura do tipo eulitita, são de interesse devido as suas propriedades luminescentes, que os tornam promissores para aplicação como dispositivos ópticos. Vidros do sistema GeO2-Bi2O3 (BGO) também tem sido tema de inúmeras pesquisas por combinarem um típico formador vítreo (GeO2) a um formador condicional composto intermediário (Bi2O3), o que os proporciona características estruturais únicas, resultantes da mudança de coordenação dos átomos de germânio (fenômeno de anomalia do germânio) e também dos átomos de bismuto. Neste trabalho, estudou-se a influência da adição de CeO2, comumente conhecido como agente oxidante, nas propriedades físico-químicas de vidros de germanato de bismuto do sistema [100-x].[(1-y)GeO2-yBi2O3]:xCeO2 (para x = 0,2 ou 1 e y = 0,2 ou 0,3 % em mol), preparados pelo método de fusão e moldagem. O escurecimento inomogêneo das amostras, associado à termoredução do íon Bi3+, foi evitado com a adição de céria, que se mostrou um modificador da estrutura local dos vidros, mesmo para uma dopagem de 0,2 % em mol. Foi observada, pela primeira vez, a cristalização da fase de estrutura eulitita cintiladora induzida pela presença de Ag na superfície do vidro de composição 99,8[0,8GeO2- 0,2Bi2O3 ]:0,2CeO2 % em mol, referido pela sigla 80BGO:0,2Ce, abaixo da temperatura de transição vítrea (Tg). A difusão de Ag no vidro é condição necessária para que o fenômeno da cristalização aconteça, uma vez que esse elemento pode ser considerado um efetivo agente nucleante para a fase cintiladora. A cristalização induzida é favorecida pela tensão gerada na interface cristal/vidro, devido a uma diferença de volume molar entre essas duas fases, o que permite que o fenômeno da cristalização seja observado em temperturas inferiores à Tg. / Glassy materials with similar properties to those of the bismuth-germanate crystal in the composition of Bi4Ge3O12, a scintillator material with the eulytite structure, are of interest due to their luminescent properties that makes them promising materials to application as optical devices. Glasses from the system GeO2-Bi2O3 (BGO) has also being subjects of numerous studies, by combining a typical glass former oxide (GeO2) with the conditional one intermediate compound (Bi2O3). The presence of these two oxide compounds in the glass composition provides them a unique structural characteristic resulting from the coordination changes of germanium atoms (germanium anomaly phenomenon) and also of the bismuth atoms. In the present work, it was studied the influence of CeO2 addition, commonly known as an oxidant agent, in the physical-chemical properties of the bismuth-germanate glasses up to the system [100-x].[(1-y)GeO2-yBi2O3 ]:xCeO2 (for x = 0.2 or 1 and y = 0.2 or 0.3 mol %), prepared by the melting/molding method. The inhomogeneous darkening of the samples, associated to the thermal reduction of the Bi3+ ions, was avoided by the ceria addition that acts as a local modifier of the glass structure even for concentrations of 0.2 mol %. It was observed, by the first time, the crystallization of the eulytite scintillator phase, induced by the presence of Ag in the surface of the glass in the 99[0.8GeO2- 0.2Bi2O3 ]:0.2CeO2 mol % composition, referred to as 80BGO:0.2Ce, below the glass transition temperature (Tg). The Ag diffusion into the glass is a necessary condition to the crystallization phenomenon since this element can be considered as an effective nucleating agent to the scintillator phase. The crystallization is favored by the tension generated in the crystal/glass interface, due to a difference in molar volume of these two phases, allowing that the crystallization phenomenon be observed at temperatures below Tg.

The Maya of Central America developed a complex society: among their many achievements they developed a writing system, complex calendar and were prolific builders. The buildings of their large urban centres, such as Copan in Honduras, were decorated with painted stucco, moulded masks, carving and elaborate murals, using a range of coloured pigments. In this study the paints used on the buildings of Copan and some ceramic sherds have been investigated, non-destructively, using micro-Raman spectroscopy, micro-ATR infrared spectroscopy, environmental scanning electron microscopy with energy dispersive X-ray analysis (ESEM-EDX) and FTIR-ATR imaging spectroscopy. The paint samples come from four buildings and one tomb covering three time periods in the four hundred year history of Copan. The main pigment used in the red paint on these samples was identified as haematite, and the stucco as a mixture of calcite particles dispersed throughout a calcite-based lime wash stucco. The composition and physical nature of the stucco changed through time, indicating a refining of production techniques over this period. A range of minor mineral components have been identified in each of the samples including rutile, quartz, clay and carbon. The presence and proportion of these and other minerals differed in each sample, leading to unique mineral signatures for the paint from each time period. Green and grey paints have also been identified on one of the buildings, the Rosalila Temple. The green pigment was identified as a celadonite-based green earth, and the grey pigment as a mixture of carbon and muscovite. The combination of carbon and mica to create a reflective paint is a novel finding in Maya archaeology. The high spatial resolution of the micro-FTIR-ATR spectral imaging system has been used to resolve individual particles in tomb wall paint and to identify their mineralogy from their spectra. This system has been used in combination with micro-Raman spectroscopy and ESEM-EDX mapping to characterize the paint, which was found to be a mixture of haematite and silicate particles, with minor amounts of calcite, carbon and magnetite particles, in a sub-micron haematite and calcite matrix. The blending of a high percentage of silicate particles into the haematite pigment is unique the tomb sample. The stucco in this tomb wall paint has finely ground carbon dispersed throughout the top layer providing a dark base for the paint layer. Changing paint mixtures and stucco composition were found to correlate with changes in paint processing techniques and building construction methods over the four hundred years of site occupation.

Materiais vítreos com propriedades similares às do cristal germanato de bismuto de composição Bi4Ge3O12, material cintilador que possui estrutura do tipo eulitita, são de interesse devido as suas propriedades luminescentes, que os tornam promissores para aplicação como dispositivos ópticos. Vidros do sistema GeO2-Bi2O3 (BGO) também tem sido tema de inúmeras pesquisas por combinarem um típico formador vítreo (GeO2) a um formador condicional composto intermediário (Bi2O3), o que os proporciona características estruturais únicas, resultantes da mudança de coordenação dos átomos de germânio (fenômeno de anomalia do germânio) e também dos átomos de bismuto. Neste trabalho, estudou-se a influência da adição de CeO2, comumente conhecido como agente oxidante, nas propriedades físico-químicas de vidros de germanato de bismuto do sistema [100-x].[(1-y)GeO2-yBi2O3]:xCeO2 (para x = 0,2 ou 1 e y = 0,2 ou 0,3 % em mol), preparados pelo método de fusão e moldagem. O escurecimento inomogêneo das amostras, associado à termoredução do íon Bi3+, foi evitado com a adição de céria, que se mostrou um modificador da estrutura local dos vidros, mesmo para uma dopagem de 0,2 % em mol. Foi observada, pela primeira vez, a cristalização da fase de estrutura eulitita cintiladora induzida pela presença de Ag na superfície do vidro de composição 99,8[0,8GeO2- 0,2Bi2O3 ]:0,2CeO2 % em mol, referido pela sigla 80BGO:0,2Ce, abaixo da temperatura de transição vítrea (Tg). A difusão de Ag no vidro é condição necessária para que o fenômeno da cristalização aconteça, uma vez que esse elemento pode ser considerado um efetivo agente nucleante para a fase cintiladora. A cristalização induzida é favorecida pela tensão gerada na interface cristal/vidro, devido a uma diferença de volume molar entre essas duas fases, o que permite que o fenômeno da cristalização seja observado em temperturas inferiores à Tg. / Glassy materials with similar properties to those of the bismuth-germanate crystal in the composition of Bi4Ge3O12, a scintillator material with the eulytite structure, are of interest due to their luminescent properties that makes them promising materials to application as optical devices. Glasses from the system GeO2-Bi2O3 (BGO) has also being subjects of numerous studies, by combining a typical glass former oxide (GeO2) with the conditional one intermediate compound (Bi2O3). The presence of these two oxide compounds in the glass composition provides them a unique structural characteristic resulting from the coordination changes of germanium atoms (germanium anomaly phenomenon) and also of the bismuth atoms. In the present work, it was studied the influence of CeO2 addition, commonly known as an oxidant agent, in the physical-chemical properties of the bismuth-germanate glasses up to the system [100-x].[(1-y)GeO2-yBi2O3 ]:xCeO2 (for x = 0.2 or 1 and y = 0.2 or 0.3 mol %), prepared by the melting/molding method. The inhomogeneous darkening of the samples, associated to the thermal reduction of the Bi3+ ions, was avoided by the ceria addition that acts as a local modifier of the glass structure even for concentrations of 0.2 mol %. It was observed, by the first time, the crystallization of the eulytite scintillator phase, induced by the presence of Ag in the surface of the glass in the 99[0.8GeO2- 0.2Bi2O3 ]:0.2CeO2 mol % composition, referred to as 80BGO:0.2Ce, below the glass transition temperature (Tg). The Ag diffusion into the glass is a necessary condition to the crystallization phenomenon since this element can be considered as an effective nucleating agent to the scintillator phase. The crystallization is favored by the tension generated in the crystal/glass interface, due to a difference in molar volume of these two phases, allowing that the crystallization phenomenon be observed at temperatures below Tg.

Solid Oxide Fuel Cells (SOFCs) are emerging as a potential breakthrough energy conversion technology for clean and efficient production of electricity and heat from hydrogen and hydrocarbon fuels. Sc0.1Ce0.01ZrO2 electrolytes for Solid Oxide Fuel Cells are very promising materials because their high ionic conductivity in the intermediate temperature range 700°C-800°C. The vibration response of cubic and rhombohedral (β) 10 mol%Sc2O3 - 1 mol%CeO2 - ZrO2(Sc0.1Ce0.01ZrO2 ) both at room and high-temperatures is reported. The in-situ heating experiments and ex-situ indentation experiments were performed to characterize the vibrational behavior of these important materials. A temperature and stress-assisted phase transition from cubic to rhombohedral phase was detected during in-situ Raman spectroscopy experiments. While heating and indentation experiments performed separately did not cause the transition of the cubic phase into the rhombohedral structure under the performed experimental conditions and only broadened or strained peaks of the cubic phase could be detected, the heating of the indented (strained) surface leaded to the formation of the rhombohedral Sc0.1Ce0.01ZrO2. Both temperature range and strained zone were estimated by in situ heating and 2D mapping, where a formation of rhombohedral or retention of cubic phase has been promoted. The mechanical properties, such as Young’s modulus, Vickers hardness, indentation fracture resistance, room and high temperature four point bending strength and SEVNB fracture toughness along with the stress – strain deformation behavior in compression, of 10 mol% Sc2O3 – 1 mol % CeO2 - ZrO2 (ScCeZrO2) ceramics have been studied. The chosen composition of the ScCeZrO2 has very high ionic conductivity and, therefore, is very promising oxygen ion conducting electrolyte for the intermediate temperature Solid Oxide Fuel Cells. Therefore, its mechanical behavior is of importance and is presented in this study.

Solar thermal energy is emerging as an important source of renewable energy for meeting the ever-increasing energy requirements of the world. Solar selective coatings are known to enhance the efficiency of the photo thermal energy conversion. An ideal solar selective coating has zero reflectance in the solar spectrum region (i.e., 0.3-2.5 µm) and 100% reflectance in the infrared (IR) region (i.e. 2.5-50 µm). In this thesis, novel carbon nanotubes (CNT) and graphene based absorbers have been developed for photo thermal applications. Carbon nanotubes have good optical properties (i.e., α and ε close to 1), high aspect ratios (> 150), high surface area (470 m2/g) and high thermal conductivity (> 3000 W/mK), which enable rapid heat transfer from the CNTs to the substrates. Similarly, graphene also exhibits high transmittance (97%), low reflectance, high thermal conductivity (5000 W/mK) and high oxidation resistance behaviour. The major drawback of using CNTs for photothermal applications is that it exhibits poor spectral selectivity (i.e., α/ε = 1). In other words, it acts as a blackbody absorber. On the other hand, graphene exhibits poor intrinsic absorption behaviour (α - 2.3%) in a broad wavelength range (UV-Near IR). The main objective of the present study is to develop CNT and graphene based absorbers for photothermal conversion applications. The growth of CNT and graphene was carried out using chemical vapour deposition and sputtering techniques. An absorber-reflector tandem concept was used to develop the CNT based tandem absorber (Ti/Al2O3/Co/CNT). The transition from blackbody absorber to solar selective absorber was achieved by varying the CNT thicknesses and by using a suitable underlying absorber (Ti/Al2O3). A simple multilayer heat mirror concept was used to develop the graphene based multilayer absorber (SiO2/graphene/Cu/graphene). The transition from high transmitance to high absorptance was achieved by varying the Cu thickness. The refractive indices and the extinction coefficients of Ti/Al2O3, AlTiO and graphene samples were determined by the phase-modulated spectroscopic ellipsometric technique. Finally, the optical properties (i.e., absorptance and the emittance) of the CNT and graphene based absorbers were investigated. Chapter 1 gives a brief introduction about solar thermal energy, spectrally selective coating and photothermal conversion. The different types of absorbers used to achieve the spectral selectivity have also been discussed shortly. A brief description about the carbon-based materials/allotropes and their properties are outlined. The properties of carbon nanotubes and graphene which are the 1-D and 2-D allotropes of carbon, respectively are tabulated. A detailed literature survey was carried out in order to identify the potential candidates for the photothermal conversion applications. The objectives and the scope of the thesis are also discussed in this chapter. Chapter 2 discusses the deposition and characterization techniques used for the growth and the study of 1-D and 2-D carbon nanostructures. Atmospheric pressure chemical vapour deposition (CVD) and hot filament CVD techniques were used to grow CNT and graphene, respectively. The magnetron sputtering technique was used for the growth of ‘Ti’, ‘Al2O3’ and Co layers which were needed to grow the CNT based tandem absorber on stainless steel (SS) substrates. The important characterization techniques used to examine various properties of the 1-D and 2-D carbon nanostructures include: X-ray diffraction, X-ray photoelectron spectroscopy (XPS), atomic force microscopy (AFM), field-emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM), phase modulated ellipsometry, UV-VIS-NIR spectrophotometer, Fourier-infrared spectroscopy (FTIR), micro-Raman spectroscopy and solar spectrum reflectometer and emissometer. Chapter 3 describes the design and development of Ti/Al2O3 coating for the growth of CNT-based tandem absorber on SS substrates. The power densities of the aluminum and titanium targets and the oxygen flow rates were optimized to deposit the Ti/Al2O3 coatings. The optimized Ti/Al2O3 coating with a Co catalyst on top was used as an underlying substrate to grow the CNT-based tandem absorber at 800°C in Ar+H2 atmosphere (i.e., CNT/Co/Al2O3/Ti/SS). The formation of aluminum titanium oxide (AlTiO) was observed during the CNT growth process and this layer enhances the optical properties of the CNT based tandem absorber. The optical constants of Ti, Al2O3 and AlTiO coatings were measured using phase modulated spectroscopic ellipsometry in the wavelength range of 300-900 nm. The experimentally measured ellipsometric parameters have been fitted with the simulated spectra using the Tauc-Lorentz model for generating the dispersion of the optical constants of the Al2O3 and the AlTiO layers. The Ti and Al2O3 layer thicknesses play a major role in the design of the CNT based tandem absorber with good optical properties. Chapter 4 describes the synthesis and characterization of the CNT based tandem absorber (Ti/AlTiO/CoO/CNTs) deposited on SS substrates. CNTs at different thicknesses were grown on Ti/AlTiO/CoO coated SS substrates using atmospheric CVD at various growth durations. The transition from blackbody absorber to solar selective absorber was achieved by varying the thicknesses of the CNTs and by suitably designing the bottom tandem absorber. At thicknesses > 10 µm, the CNT forest acts as near-perfect blackbody absorber, whereas, at thicknesses ≤ 0.36 µm, the IR reflectance of the coating increases (i.e., ε = 0.20) with slight decrease in the absorptance (i.e., α = 0.95). A spectral selectivity (α/ε) of 4.75 has been achieved for the 0.36 µm-thick CNTs grown on SS/Ti/AlTiO/CoO tandem absorber. Chapter 5 discusses the growth of graphene on polycrystalline copper (Cu) foils (1 cm × 1 cm) using hot filament CVD. The roles of the process parameters such as gas flow rates (methane and hydrogen), growth temperatures (filament and substrate) and durations on the growth of graphene were studied. The process parameters were also optimized to grow monolayer, bilayer and multilayer graphene in a controlled manner and the growth mechanism was deduced from the experimental results. The presence of graphene on Cu foils was confirmed using XPS, micro-Raman spectroscopy, FESEM and TEM techniques. The FESEM data clearly confirmed that graphene starts nucleating as hexagonal islands which later evolves into dendritic lobe shaped islands with an increase in the supersaturation. The TEM data substantiated further the growth of monolayer, bilayer and multilayer graphene. The intensity of 2D and G peak ratio (i.e., I2D/IG = 2) confirmed the presence of the monolayer graphene and the absence of the ‘D’ peak in the Raman spectrum indicated the high purity of graphene grown on Cu foils. The results show that the polycrystalline morphology of the copper foil has negligible effect on the growth of monolayer graphene. In Chapter 6, the design and development of graphene/Cu/graphene multilayer absorber and the study of its optical properties are discussed. The multilayer graphene grown on Cu foils has been transferred on quartz and SiO2 substrates in order to fabricate the graphene/Cu/graphene multilayer absorber. The sputtering technique was used to deposit copper on top of graphene/quartz substrates. The uniformity of the transferred multilayer graphene films was confirmed using Raman mapping. A simple multilayer heat mirror concept was used to develop the graphene/Cu/graphene absorber on quartz substrates and the transition from high transmittance to high absorptance was achieved. In order to further enhance the absorption, the graphene/Cu/graphene multilayer coating was fabricated on SiO2 substrates. The thickness of the Cu layer plays a major role in creating destructive interference, which results in high absorptance and low emittance. A high specular absorptance of 0.91 and emittance of 0.22 was achieved for the SiO2 graphene/Cu/graphene multilayer absorber. The specular reflectance of the multilayer absorber coatings was measured using the universal reflectance accessory of the UV-VIS-NIR spectrophotometer. Chapter 7 summarizes the major findings of the present investigation and also suggests future aspects for experimentation and analysis. The results obtained from the present work clearly indicate that both CNT and graphene based absorbers can be used as potential candidates for photothermal applications. In particular, the CNT based tandem absorber can be used for high temperature solar thermal applications and the graphene based multilayer absorber finds applications in the area of photodetectors and optical broadband modulators.