Theoretical and experimental studies of real-time interrogation of optical sensors based on wavelength-to-time (WTT) mapping are presented. The sensing information is encoded in the spectrum of an optical sensor, and transferred to the time domain by using WTT mapping. Utilizing digital electronics for post processing, the sensing information can be interrogated at an ultra-high speed and resolution. Two sensors based on WTT mapping are proposed and demonstrated. First, a random grating sensor for simultaneous measurement of the temperature and strain is investigated. An ultra-short pulse from a mode-lock laser is spectrum shaped by a high-birefringence random grating to generate two orthogonally polarized spectrums, which are then fed to an optical loop in which a linearly chirped fiber Bragg grating is incorporated. Linear WTT mapping is implemented, and two temporally separated optical pulses are generated, and then converted to two electrical waveforms at a photodetector. Pulse compression is then employed. By measuring the temporal intervals of the temporally compressed pulses, the strain and temperature information can be retrieved. Conventional fiber based sensors are not sensitive to the refractive index change of the environment. In the second sensor, a silicon photonic microdisk resonator (MDR) for temperature and liquid refractive index sensing is proposed and demonstrated. By using the notches in the spectrum of the MDR, a microwave photonic filter (MPF) is implemented. By feeding a linearly chirped microwave signal to the MPF, a filtered signal with its temporal location representing the spectrum is generated. By monitoring the time location of the filtered signal, the temperature or the refractive index information is revealed.

In this paper, we propose a rate-compatible forward error-correcting (FEC) scheme based on low-density-parity check (LDPC) codes together with its software reconfigurable unified field-programmable gate array (FPGA) architecture. By FPGA emulation, we demonstrate that the proposed class of rate-compatible LDPC codes based on puncturing and generalized LDPC coding with an overhead from 25% to 46% provides a coding gain ranging from 12.67 to 13.8 dB at a post-FEC bit-error rate (BER) of 10(-15). As a result, the proposed rate-compatible codes represent one of the strong FEC candidates of soft-decision FEC for both short-haul and long-haul optical transmission systems.

The increasing demand for high performance communications systems and signal processing is constantly driving researchers to develop novel devices in both the microwave and optical domains. The possibility of using high temperature superconductors (HTS) as a platform for ultra-fast, ultra-high sensitive optoelectronic and microwave photonic devices has been explored. This report introduces a cryogenic microwave photonic probe station, designed and built to characterize HTS microwave photonic devices. A methodology is presented to design coplanar waveguide transmission lines using HTS. The transmission line is then modified to include a meander line structure to serve the optoelectronic function. The device is characterized in several different operating domains, as an optically tunable microwave resonator, an optically tunable delay line, and finally as a photodetector. A planar HTS weak leak structure is investigated with the measurements of the I-V characteristics. Moreover, this device is proposed as the next generation platform to fabricate ultra-fast and ultra-high sensitive photodetectors using HTS.

The increasing demand for high performance communications systems and signal processing is constantly driving researchers to develop novel devices in both the microwave and optical domains. The possibility of using high temperature superconductors (HTS) as a platform for ultra-fast, ultra-high sensitive optoelectronic and microwave photonic devices has been explored. This report introduces a cryogenic microwave photonic probe station, designed and built to characterize HTS microwave photonic devices. A methodology is presented to design coplanar waveguide transmission lines using HTS. The transmission line is then modified to include a meander line structure to serve the optoelectronic function. The device is characterized in several different operating domains, as an optically tunable microwave resonator, an optically tunable delay line, and finally as a photodetector. A planar HTS weak leak structure is investigated with the measurements of the I-V characteristics. Moreover, this device is proposed as the next generation platform to fabricate ultra-fast and ultra-high sensitive photodetectors using HTS.

In this thesis, dual-frequency optoelectronic oscillators (OEOs) and their applications to transverse load sensing are studied. Two configurations of dual-frequency OEOs are proposed and investigated. In the first configuration, a polarization-maintaining phase-shifted fiber Bragg grating (PM-PSFBG) is employed in the OEO loop to the generation of two oscillating frequencies. The beat between the two oscillating frequencies is a function of the load applied to the PM-PSFBG, which is used in transverse load sensing. To avoid the frequency measurement ambiguity, a second configuration is proposed by coupling a dual-wavelength fiber laser to the dual-frequency OEO. A single tone microwave signal with the frequency determined by the birefringence of the grating is generated in the OEO and is fed into the fiber ring laser to injection lock the dual wavelengths. The sensitivity and the resolution are measured to be 9.73 GHz/(N/mm) and 2.06×10-4 N/mm, respectively. The high stability of the single-tone microwave signal permits accurate measurement, while the frequency interrogation allows an ultra-high speed demodulation.

Photonic signal processing has been considered a promising solution to overcome the inherent bandwidth limitations of its electronic counterparts. Over the last few years, an impressive range of photonic integrated signal processors have been proposed with the technological advances of III-V and silicon photonics, but the signal processors offer limited tunability or reconfigurability, a feature highly needed for the implementation of programmable photonic signal processors. In this thesis, tunable and reconfigurable photonic signal processors are studied. Specifically, a photonic signal processor based on the III-V material system having a single ring resonator structure for temporal integration and Hilbert transformation with a tunable fractional order and tunable operation wavelength is proposed and experimentally demonstrated. The temporal integrator has an integration time of 6331 ps, which is an order of magnitude longer than that provided by the previously reported photonic integrators. The processor can also provide a continuously tunable fractional order and a tunable operation wavelength. To enable general-purpose signal processing, a reconfigurable photonic signal processor based on the III-V material system having a three-coupled ring resonator structure is proposed and experimentally demonstrated. The reconfigurability of the processor is achieved by forward or reverse biasing the semiconductor optical amplifiers (SOAs) in the ring resonators, to change the optical geometry of the processor which allows the processor to perform different photonic signal processing functions including temporal integration, temporal differentiation, and Hilbert transformation. The integration time of the signal processor is measured to be 10.9 ns, which is largely improved compared with the single ring resonator structure due to a higher Q-factor. In addition, 1st, 2nd, and 3rd of temporal integration operations are demonstrated, as well as a continuously tunable order for differentiation and Hilbert transformation. The tuning range of the operation wavelength is 0.22 nm for the processor to perform the three functions. Compared with the III-V material system, the CMOS compatible SOI material system is more cost effective, and it offers a smaller footprint due to the strong refractive index contrast between silicon and silica. Active components such as phase modulators (PMs) can also be implemented. In this thesis, two photonic temporal differentiators having an interferometer structure to achieve active and passive fractional order tuning are proposed and experimentally demonstrated. For both the active and passive temporal differentiators, the fractional order can be tuned from 0 to 1. For the active temporal differentiator, the tuning range of the operation wavelength is 0.74 nm. The use of the actively tunable temporal differentiator to perform high speed coding with a data rate of 16 Gbps is also experimentally demonstrated.

In this thesis, new techniques to generate slow and fast light are proposed and investigated. The use of the slow and fast light for microwave photonics applications is also investigated. This thesis consists of four parts. In the first part, the generation of slow and fast light based on fiber Bragg gratings (FBGs) is studied. Two techniques are proposed. In the first technique, slow and fast light is generated based on a linearly chirped fiber Bragg grating (LCFBG); and in the second technique, slow and fast light is generated based on a tilted fiber Bragg grating (TFBG). Theoretical analysis is performed which is verified by experiments. In the second part, the applications of FBG-based slow and fast light in microwave photonics are studied. These applications include all-optical tunable microwave frequency multiplication, tunable microwave chirped pulse generation, tunable phase shifting, tunable fractional order differentiation, and tunable microwave photonic filtering. In the third part, the generation of slow and fast light based on microring resonators (MRRs) is studied. Novel methods to obtain continuously tunable slow to fast light are proposed and experimentally demonstrated by using a silicon-on-insulator (SOI) MRR with MMI (multi-mode interference) couplers, and a high-contrast Ge-doped silica-on-silicon (SOS) MRR. In the fourth part, the applications of the MRR-based slow and fast light in microwave photonics are studied. These applications include all-optical tunable fractional order differentiation, and tunable fractional order Hilbert transformation.

Esta tesis doctoral tiene como objetivo el diseño y la implementación de dispositivos ópticos novedosos capaces de realizar tareas de procesado de señales de rediofrecuencia, concretamente en las bandas de microondas y milimétricas, explotando para ello efectos de luz lenta que tienen lugar sobre algunos medios físicos que presentan características especiales. Con este propósito, se han investigado estructuras basadas en tecnología de semiconductor en guiaonda, además de estructuras de naturaleza resonante sobre circuitos en silicio y compuestos híbridos fabricados con materiales activos pertenecientes a los grupos III-V sobre silicio. En concreto, se han prouestos diferentes circuitos ópticos capaces de desarrollar tareas propias de desfasador y retardadeo verdadero de banda ancha para señales de radiofrecuncia. El comportamiento de dichos circuitos ópticos bajo estudio se ha caracterizado mediante modelado teórico, quedando éstos adecuadamente validados a través de resultados experimentales. En primer lugar, se han llevado a cabo estudios concernientes a la degradación producida por ruido en estructuras desfasadores formadas por amplificadores ópticos de semiconductor. Como resultado, se ha propuesto una nueva estructura que ha revertido en un rendimiento optimizado en términos de ruido sin que ello suponga una alteración en su funcionnalidad básica como desfasador. Esta estructura desfasadora ha sido el elemento clave en el ensamblado de un filtro elimina banda sintonizable. En segundo lugar, se han utilizado diferentes configuraciones basadas en anillos de silicio con dimensiones micrométricas para el desarrollo e implementación de diferentes procesadores de señal, tales como filtros reconfigurables y sintonizables y retardadores multicanal. Concretamente, se ha introducido un nuevo concepto inspirado en la técnica conocida como SCT, cuyo beneficio redunda en un aumento considerable del ancho de banda útil de las señales de radiofrecuencia a procesar gracias a / Lloret Soler, JA. (2012). Slow Light Effects in Photonic Integrated Circuits with Application to Microwave Photonics [Tesis doctoral no publicada]. Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/16472 / Palancia

[EN] Microwave photonics (MWP) is a well-established research field that investigates the use of photonic technologies to generate, distribute, process and analyze RF waveforms in the optical domain. Despite its great potential to solve long-standing problems faced by both the microwave and electronics industries, MWP systems are bulky, expensive and consume a lot of power. Integrated microwave photonics (IMWP) is an emerging area of research that promises to alleviate most of these drawbacks through the use of photonic integrated circuits (PIC). In this work, we have aimed at further closing the gap between the worlds of MWP and integrated optics. In particular, we have focused on the design and experimental characterization of PICs with reconfigurable, ring-assisted Mach-Zehnder interferometer filters (RAMZI), and demonstrated its potential use in different IMWP applications. These filters consist of a symmetric MZI loaded with ring resonators, which are coupled to the MZI branches by different optical couplers. The contributions of this thesis can be split into two sections. In the first one, we demonstrate integrated optical couplers and reflectors with variable power splitting and reflections ratios. These exploit the well-known properties of tapered multimode interference couplers (MMI), and their inherent robustness makes them highly suitable for the implementation of both RAMZI and reflective filters. Besides, we study in detail the impact of manufacturing deviations in the performance of a 4x4 MMI-based 90º hybrid, which is a fundamental building block in coherent optical communication systems. In the second section, we demonstrate the use of integrated RAMZI filters for three different IMWP applications, including instantaneous frequency measurement (IFM), direct detection of frequency-modulated signals in a MWP link, as well as in tunable, coherent MWP filters. A theoretical analysis of the limits and trade-offs that exist in photonics-based IFM systems is also provided. Even though these are early proof-of-concept experiments, we hope that further technological developments in the field will finally turn MWP into a commercial reality. / [ES] La fotónica de microondas (MWP) es un campo de investigación que estudia el uso de tecnologías ópticas para generar, distribuir, procesar y analizar señales de RF. A pesar de su gran potencial para resolver algunos de los problemas a los que se enfrentan las industrias electrónica y de microondas, estos sistemas son voluminosos, caros y consumen mucha potencia. La fotónica de microondas integrada (IMWP) es un área emergente que promete solucionar todos estos inconvenientes a través de la utilización de circuitos ópticos integrados (PIC). En esta tesis, hemos pretendido avanzar un poco más en el acercamiento entre estas dos disciplinas. En concreto, nos hemos centrado en el diseño y caracterización experimental de PICs con filtros reconfigurables basados en interferómetros Mach-Zehnder cargados con anillos (RAMZI), y demostrado su potencial uso en diferentes aplicaciones de IMWP. Los filtros RAMZI están hecho básicamente de un MZI simétrico cargado con anillos, los cuales a su vez se acoplan a las ramas del interferómetro a través de distintos acopladores ópticos. Las contribuciones de este trabajo se pueden dividir en dos partes. En la primera, hemos demostrado acopladores y reflectores ópticos integrados con coeficientes de acoplo y reflexión variables. Éstos explotan las propiedades de los acopladores por interferencia multimodal (MMI), y su robustez les hace muy atractivos para la implementación de filtros RAMZI y de tipo reflectivo. Además, hemos analizado el impacto que las tolerancias de fabricación tienen en el rendimiento de un híbrido óptico de 90º basado en un MMI 4x4, el cual es un elemento fundamental en los sistemas de comunicaciones ópticas coherentes. En la segunda parte, hemos demostrado el uso de filtros RAMZI en tres aplicaciones distintas de IMWP. En concreto, hemos utilizado dichos filtros para implementar sistemas de medida de frecuencia instantánea (IFM), detección directa de señales moduladas en frecuencia para enlaces fotónicos, así como en filtros coherentes y sintonizables de MWP. También hemos desarrollado un análisis teórico de las limitaciones y problemas que existen en los sistemas IFM. A pesar de que todos los experimentos realizados han consistido en prototipos para una prueba de concepto, esperamos que futuros avances tecnológicos permitan que la fotónica de microondas se convierta algún día en una realidad comercial. / [CAT] La fotònica de microones (MWP) és un camp d'investigació que estudia l'ús de tecnologies òptiques per a generar, distribuir, processar y analitzar senyals de radiofreqüència. A pesar del seu gran potencial per a resoldre alguns dels problemes als que s'enfronten les indústries electrònica i de microones, estos sistemes son voluminosos, cars i consumixen molta potència. La fotònica de microones integrada (IMWP) és un àrea emergent que promet solucionar tots estos inconvenients a través de la utilització de circuits òptics integrats (PIC). En esta tesi, hem pretés avançar un poc més en l'acostament entre estes dos disciplines. En concret, ens hem centrat en el disseny i caracterització experimental de PICs amb filtres reconfigurables basats en interferòmetres Mach-Zehnder carregats amb anells (RAMZI), i demostrat el seu potencial en diferents aplicacions d' IMWP. Els filtres RAMZI estan fets bàsicament d'un MZI simètric carregat amb anells, els quals, al seu torn, s'acoblen a les branques del interferòmetre a través de distints acobladors òptics. Les contribucions d'este treball es poden dividir en dos parts. En la primera, hem demostrat acobladors i reflectors òptics integrats amb coeficients de transmissió i reflexió variables. Estos exploten les propietats dels acobladors per interferència multimodal (MMI), i la seua robustesa els fa molt atractius per a la implementació de filtres RAMZI i de tipo reflectiu. A més a més, hem analitzat l'impacte que les toleràncies de fabricació tenen en el rendiment d'un híbrid òptic de 90 graus basat en un MMI 4x4, el qual és un element fonamental en els sistemes de comunicacions òptiques coherents. En la segona part, hem demostrat l'ús de filtres RAMZI en tres aplicacions diferents de IMWP. En concret, hem utilitzat estos filtres per a implementar sistemes de mesura de freqüència instantània (IFM), detecció directa de senyals modulades en freqüència per a enllaços fotònics, així com en filtres coherents i sintonitzables de MWP. També hem desenvolupat una anàlisi teòrica de les limitacions i problemes que existixen en els sistemes IFM. A pesar de que tots els experiments realitzats han consistit en prototips per a una prova de concepte, esperem que futurs avanços tecnològics permeten que la fotònica de microones es convertisca algun dia en una realitat comercial. / Sánchez Fandiño, JA. (2016). Integrated Optical Filters for Microwave Photonic Applications [Tesis doctoral no publicada]. Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/67690 / TESIS

In future cellular radio networks Radio over Fiber (RoF) is a very attractive technology to deliver microwave and millimeter-wave signals containing broad band multimedia services to numerous base stations of the network. The radio signals are placed on an optical carrier and distributed by means of an optical fiber network to the base stations (BS). In the BS the optical signals heterodyne in a photodiode to produce the radio signals which are then sent via a wireless link to the mobile units (MU). The optical fiber network provides high frequency, wideband, low loss and a means of signal distribution immune to electromagnetic interference. In this thesis, different methods of electrooptical upconversion were investigated. The generation of an optical double-sideband with suppressed carrier (DSB-SC) signal is a straightforward method due to the fact that only one optical modulator driven at half the millimeter-wave frequency is required. One or both sidebands were ASK-modulated with baseband data rates of up to 10 Gbps. Optical single sideband modulation proves to be dispersion resilient as error free transmission was demonstrated after 53 km of single mode fiber transmission for data rates up to 10 Gbps. Wireless links up to 7 m were also demonstrated, proving the feasibility of this approach for broadband wireless inhouse access systems. / Für zukünftige zellulare Funknetze ist „Radio over Fiber (RoF)“ eine sehr attraktive Technologie, um breitbandige Multimedia-Dienste mit Mikro- und Millimeterwellen zu übertragen. Die Funksignale werden dabei auf eine optische Trägerwelle aufmoduliert und mittels eines optischen Fasernetzes zu den Basisstationen (BS) verteilt. In den BS erfolgt die Überlagung der optischen Signale durch eine Fotodiode, um die Funksignale zu erzeugen. Diese werden dann über eine drahtlose Verbindung zu den beweglichen Multimedia-Endgeräten geschickt. Vorteile des optischen Fasernetzes sind Breitbandigkeit, geringe Dämpfung und eine gegenüber elektromagnetischen Störungen immune Signalverteilung. In dieser Arbeit werden verschiedene Methoden der elektrooptischen Aufwärtskonversion erforscht und die wichtigsten Eigenschaften dieser untersucht. Die Erzeugung eines optischen Zweiseitenbandsignales mit unterdrücktem Träger (DSB-SC) ist eine einfache Methode, da nur ein optischer Modulator, betrieben mit der halben elektrischen Trägerfrequenz, benötigt wird. Eine oder beide Seitenbänder konnten mit Bitraten bis zu 10 Gbps amplitudenmoduliert werden. Optische Einseitenbandmodulation ist extrem tolerant bezüglich der chromatischen Dispersion der Faser, wie die fehlerfreie Übertragung nach 53 km Glasfaser beweist. Drahtlose Links bis zu 7 m wurden realisiert und zeigen die Möglichkeit dieser Verfahren für breitbandige drahtlose Inhouse-Zugangssysteme.