No description available.

Thesis (Ph. D.)--West Virginia University, 2007. / Title from document title page. Document formatted into pages; contains xiv, 182 p. : ill. (some col.). Includes abstract. Includes bibliographical references (p. 151-154).

The schlieren technique describes an optical analysis method designed to enhance light distortions caused by air movement. The ability to visualize gas flows has significant implications for analyzing underground mine ventilation systems. Currently, the widely utilized traditional schlieren methods are impractical underground due to complex equipment and design requirements. Background oriented schlieren (BOS) provides a solution to this problem. BOS requires two primary components, a professional quality digital camera and a schlieren background. A schlieren background is composed of a varying contrast repetitive pattern, such as black and white stripes or dots. This background allows the camera's sensor to capture the minor light diffractions that are caused by transparent inhomogeneous gases through image correlation. This paper investigates a possible means of mitigating some of the major problems associated with surveying underground mine ventilation systems with the BOS method. BOS is an imaging technique first introduced in 1999 that allows the visualization of flowing inhomogeneous transparent media. In ventilation surveys, BOS can be used to attain qualitative data about airflows in complex areas and methane emissions from coal. The acquisition of such data would not only enhance the understanding of mine ventilation but also improve the accuracy of ventilation surveys. As an example, surveys can benefit from small scale BOS investigations around fans, regulators, overcasts, and critical junctions to identify effective data gathering positions. Regular inspections of controls and methane monitoring points could also be improved by the systematic nature of BOS. Computer programs could process images of each location identically regardless of quantity. BOS can then serve as a check to identify items that were overlooked during the routine inspection. Despite the potential of BOS for ventilation analysis, several limitations still exist. These issues are sensitivity threshold and quantification of flow data. This paper specifically examines the qualitative potential of the BOS technique for imaging various underground ventilation flows and outlines initial experimental efforts used for the evaluation. Three primary experiments were conducted to evaluate BOS as a potential qualitative analysis technique for underground mine ventilation. The first experiment used BOS to image of flow induced by an axial vane fan and an axial flow fan using an artificial background and an imitation rock background. This experiment showed that the BOS system was unable to image isothermal airflow from either fan. Heated airflow could be visualized with both fans using the artificial striped background but not with the imitation rock background. The BOS system lacked the sensitivity necessary to image isothermal airflow from the two fans. The focus of the overall BOS study was changed to explore higher pressure airflows through a regulator. The second experiment used BOS to image flow through a regulator induced by an axial flow fan using an artificial striped background. The BOS images were compared to ones produced by a traditional schlieren single mirror systems for validation of the BOS experimental design. This experiment was unable to image isothermal airflow through the regulator from either system. However, heated airflow could be visualized by both systems. The BOS and traditional schlieren systems used in this experiment lacked the sensitivity necessary to image isothermal airflow through a regulator. However, the BOS procedures were successfully validated by the ability of both the BOS and traditional schlieren systems to image heated airflows. The focus of the study was changed to explore methane gas emissions. Numerous mining industry techniques already exist to quantify methane content. However, methane content is different from the actual methane emission rate of exposed coal. Emission rates have been modeled using numerical simulation techniques, but the complexity of the methane migration mechanism still requires physical data to achieve higher accuracy. The third experiment investigated the feasibility of using the BOS technique for imaging methane flow by imaging methane emission from a porous medium. Laboratory grade methane was directly injected into a Brea sandstone core sample using a flexible tube. The BOS system was successfully able to image methane desorption in this study. A repeating pattern consisting of alternating black and white stripes served as the schlieren background for the Nikon D700 camera. The ability to image methane emission even at low injection pressures (i.e. 20 psi) demonstrates that actual methane desorption from coal can potentially be imaged. This result can only be conjectured because of a lack of research in the area of methane emission. Despite this issue, the experimental results suggest that BOS can be feasibly utilized to image methane emissions from coal in an underground mine. The results of the three experiment demonstrated that the potential for large scale implementation of BOS in underground mines does exist. Qualitative BOS information has the potential in the practical sense to optimize the procedures of ventilation surveys and design of ventilation monitoring equipment. For example, images of methane flow in active mining areas can be used to optimize the positioning of auxiliary ventilation equipment to dilute known areas of high methane concentration. BOS images could also be used to re-evaluate the placement of methane monitors on mining equipment to better facilitate the detection of dangerous methane concentrations in active mining areas. For these reasons, further investigation into the BOS technique for use in imaging underground airflows with differential temperatures and methane emissions in underground coal mines is suggested as an addendum to this study. / Master of Science

No description available.

This study proposes an improved methodology for solving the semi-controlled ventilation network problem. After analysis and consideration of the objective and legal, technical and operation convenience factors, the semi-controlled network problem is formulated through a nonlinear nonconvex programming model. Using the special ordered sets variables, the nonconvex problem is linearized and then optimized by the modified branch and bound procedure where the automatic interpolation technique is used to improve the accuracy to which the each nonlinear function is approximated. The global optimality of the methodology is on the computational the~ry basis. And the applicability of the methodology to the generalized ventilation problem is investigated, and it is demonstrated with a number of examples. This study also compares the several methods which have been used so far to optimize the underground ventilation networks. / Ph. D.

The adjustable-pitch setting on an axial-flow fan is the most common method of controlling airflow for primary coal mine ventilation. With this method, the fan operates at a constant speed dictated by its motor design. The angles of the blades are adjusted to change the amount of airflow and pressure to meet ventilation requirements. Typically, the fan does not operate at its optimum efficiency, which only occurs in a narrow band of air pressures and quantities. The use of variable frequency drives (VFDs), which control fan speed, provides a solution to this problem. VFDs are already used in various similar applications such as pumping and building ventilation. New technology now enables efficient VFD operation in medium voltage (2,300 – 6,900 V) fan applications. The primary benefit of a variable frequency drive is that it allows motors to operate at reduced speeds, and thus at a lower power, without a loss of torque. VFDs also allow for efficient operation over the entire life of the fan. The technical considerations of using a VFD are presented in this work, along with a method for choosing and modeling a variable speed fan to achieve maximum energy savings. As a part of this research, a spreadsheet program was developed that will calculate the optimum fan operating speed based on given fan data and specified operating conditions. A representative room and pillar coal mine is modeled to illustrate the selection and modeling process and as an example of the economic implications of using a VFD. The use of VFDs is shown to potentially yield large energy savings by increasing the fan efficiency over the life of the mine. Although there are definite power savings while using variable speed fans, the magnitude of these savings is specific to an individual mine and the operating conditions encountered. The determination of whether the use of VFDs is economically feasible requires analysis for the specific mine and its operating conditions. This work provides the background and a method for such an evaluation. / Master of Science

An experimental mine simulator was constructed which will be used to conduct tracer gas experiments in the laboratory. The test apparatus simulates a mine in a tabular deposit and is modular and simple and can be easily rearranged to represent a variety of mine geometries. The apparatus is appropriate for the use of tracer gases by being both airtight and open-circuit (exhausting to the atmosphere) and by maintaining turbulent flow throughout the model, ensuring the tracer gas is fully dispersed. The model features ports for injection and sampling of tracer gases, which represent boreholes present in an actual mine. The model is designed, in part, for the practice of tracer gas release and sampling methods in the laboratory. Valves on the apparatus represent ventilation controls, such as stoppings or regulators, or changing resistances in a mine, such an increase in resistance due to a roof fall or a decrease in resistance due to stoppings being destroyed. The relative resistances of airways can be changed by changing the status of the valves to represent different states of the ventilation controls. The mine simulator should serve as a tool for identifying and investigating novel tracer gases, developing a procedure for performing ventilation surveys using multiple tracer gases, and eventually developing a method for remotely inferring ventilation changes using tracer gases. / Master of Science

Ventilation in underground mines is vital to creating a safe working environment. Though there have been numerous improvements in mine ventilation, it is still difficult to ascertain data on the state of the ventilation system following a disaster in which ventilation controls have been potentially damaged. This information is important when making the decision to send rescue personnel into the mine. By utilizing tracer gas techniques, which are powerful techniques for monitoring ventilation systems, especially in remote or inaccessible areas, analysis of the ventilation system immediately following a mine emergency can be more rapidly ascertained. However, the success of this technique is largely dependent on the accuracy of release and sampling methods. Therefore, an analysis of sampling methods is crucial for rapid response and dependable results during emergencies. This research project involves evaluating and comparing four well-accepted sampling techniques currently utilized in the mining industry using sulfur hexafluoride, an industry standard, as the tracer gas. Additionally, Solid Phase Microextraction (SPME) fibers are introduced and evaluated as an alternative sampling means. Current sampling methods include plastic syringes, glass syringes, Tedlar bags, and vacutainers. SPME fibers have been successfully used in a variety of industries from forensics to environmental sampling and are a solvent-less method of sampling analytes. To analyze these sampling methods, samples were taken from a 0.01% standard mixture of SF6 in nitrogen and analyzed using electron capture gas chromatography (GC). The technical and practical issues surrounding each sampling method were also observed and discussed. Furthermore, the use of multiple tracer gases could allow for rapid assessment of the functionality of ventilation controls. This paper describes experimentation related to the determination of a novel mine tracer gas. Multiple tracer gases greatly increase the level of flexibility when conducting ventilation surveys to establish and monitor controls. A second tracer would substantially reduce the time it takes to administer multiple surveys since it is not necessary to wait for the first tracer to flush out of the mine which can take up to a few days. Additionally, it is possible to release different tracers at different points and follow their respective airflow paths, analyzing multiple or complex circuits. This would be impossible to do simultaneously with only one tracer. Three different tracer gases, carbon tetrafluoride, octofluoropropane, and perfluoromethlycyclohexane, were selected and evaluated on various GC columns through utilizing different gas chromatographic protocols. Perfluoromethylcyclohexane was selected as the novel tracer, and a final protocol was established that ensured adequate separation of a mixture of SF6 and perfluoromethylcyclohexane. Since there is limited literature comparing sampling techniques in the mining industry, the findings and conclusions gained from the sampling comparison study provide a benchmark for establishing optimal sampling practices for tracer gas techniques. Additionally, the determination of a novel tracer gas that can be used with and separated from SF6 using the same analytical method increases the practicality and robustness of multiple mine tracer gas techniques. This initial work will contribute to the larger project scope of determining a methodology for the remote characterization of mine ventilation systems through utilizing multiple mine tracer gases and computational fluid dynamics (CFD). This will be completed through several phases including initial laboratory testing of novel tracer gases in a model mine apparatus to develop a methodology for releasing, sampling, and modeling a mine ventilation plan and tracer gas dispersion in CFD and eventually completing field trials to validate and enhance the multiple tracer gas methodology. / Master of Science

Air leakage in underground mines is the most common cause of inefficient distribution of ventilating air. Depending upon various factors, more than half of the fresh air entering a mine short-circuits to the return airways before reaching the working faces. Consequently, large leakages create an additional demand for increased intake air, which substantially affects the efficiency of a mine ventilation system. In this study, two aspects of the leakage problem have been addressed. The first involved the difficulty of measuring air leakage. Air leaks are traditionally many in number and not necessarily large in quantity at any one source. Thus, the measurement of low air leakage quantities is difficult. The most sensitive, permissible, air velocity measuring equipment available can not detect the majority of air leakage. To aid in the detection of air leakage, a portable leakage measuring device was developed. A discussion concerning the device's design, practicality, laboratory results, and field testing is presented. The second area of research investigated the effect of leakage on a system's fan power consumption. A mine model was used to simulate different leakage conditions and monitor the corresponding fan power requirements. The results showed a number of very interesting trends. The model also pointed out the different variables that affect the influence of the leakage rate on the power consumption. The discussion of these findings is included. / M.S.

Thesis (M.Sc.(Engineering))--University of the Witwatersrand, Faculty of Engineering, 1999