No description available.

No description available.

No description available.

This research report reviews the basics of pulse code modulation (PCM) techniques and includes a special encoder design for a system which uses a laser diode output for the transmitted pulse. The text discusses PCM and its features, PCM formats, synchronization, and various accepted PCM codes. The encode circuit design is complete with a description of the circuit, circuit components, and operation. Included are the necessary diagrams, figures, specifications, and parts list. The transmitted output of the design circuit has a repetition rate of one megabit per second.

In this dissertation the performance of a novel variant of a return-to-zero (RZ) modulation format, based on square-wave phase modulation and filtering of a continuous-wave (CW) signal, is investigated and compared with various modulation formats considered in the literature. We call this modulation format continuous-wave square-wave (CWSW). With CWSW an RZ pulse train is generated by phase modulating the CW signal by a periodic square-wave phase function having an amplitude of and frequency of half the bit rate, and then filtering the signal. The filter performs phase-to-amplitude conversion, resulting in an alternate-sign RZ pulse train, which is shown to be resistant to fiber dispersion. The alternate-sign RZ pulse train is then amplitude modulated with the data before the transmission. Alternate signs between adjacent pulses makes this signal format robust to impairments caused by the optical fiber, similar to a conventional alternate-sign RZ signal format. However, the unique property of the CWSW signal format is that individual pulses can induce peak intensity enhancement (PIE), a phenomenon by which the peak of a pulse increases during the initial propagation in the presence of dispersion. The PIE in effect delays the decrease in the pulse peak, which represents the signal level for bit 1. Thus, the eye opening at the receiver is improved. An analytically tractable model is developed to explain the occurrence of the PIE, which cannot be achieved with a conventional pulse shape. The sources of performance degradations for different modulation formats in single-channel 40 Gb/s systems are also discussed in this dissertation. Various transmission system configurations of practical interest are considered and the performance of CWSW is compared with alternative modulation formats. It is found that the CWSW signal format performs significantly better than the other considered modulation formats in systems not employing dispersion compensation and is comparable to the others in dispersion-managed systems. Furthermore, the transmitter configuration of the CWSW signal format is simpler than the other approaches. / Ph. D.

Cyclostationarity feature-based (C-FB) detection and classification is a large field of research that has promising applications to intelligent receiver design. Cyclostationarity FB classification and detection algorithms have been applied to a breadth of wireless communication signals — analog and digital alike. This thesis reports on an investigation of existing methods of extracting cyclostationarity features and then presents a novel robust solution that reduces SNR requirements, removes the pre-processing task of estimating occupied signal bandwidth, and can achieve classification rates comparable to those achieved by the traditional method while based on only 1/10 of the observation time. Additionally, this thesis documents the development of a novel low order consideration of the cyclostationarity present in Continuous Phase Modulation (CPM) signals, which is more practical than using higher order cyclostationarity. Results are presented — through MATLAB simulation — that demonstrate the improvements enjoyed by FB classifiers and detectors when using robust methods of estimating cyclostationarity. Additionally, a MATLAB simulation of a CPM C-FB detector confirms that low order C-FB detection of CPM signals is possible. Finally, suggestions for further research and contribution are made at the conclusion of the thesis. / Master of Science

Call number: LD2668 .T4 1932 H65

ITC/USA 2010 Conference Proceedings / The Forty-Sixth Annual International Telemetering Conference and Technical Exhibition / October 25-28, 2010 / Town and Country Resort & Convention Center, San Diego, California / Remote sensing satellites are typically low earth orbit, and often transmit the data gathered with the remote sensors to ground stations at locations on earth. These transmissions are band limited, and must operate within a 375 MHz bandwidth in the X-Band spectrum. This can present a limitation to the amount of data that can be transmitted during the short duration of a pass (typically less than 15 minutes). It is then highly desirable to increase the bandwidth efficiency of a system for data transmission in a remote sensing downlink. This paper describes a method of achieving higher efficiency by pre-programming the satellite to adjust the modulation and coding based in at least part on the slant range to the receiving ground station. The system uses variable coding and modulation to adjust to the slant range to the ground station to achieve a throughput increase of more than 50% of the data transferred during a pass using the currently accepted technology.

International Telemetering Conference Proceedings / October 25-28, 1993 / Riviera Hotel and Convention Center, Las Vegas, Nevada / This paper analyzes the feature of frequency stability and modulation of airborne telemetry transmitters. According to the characteristic of telemetry information transmission, several methods for frequency stabilization and modulation are briefly compared. Emphasis is given to discuss frequency dividing phase- locked frequency modulation and on-off keying modulation and FM/on- off keying double modulation. With the view of raising frequency stability and modulation sensibility, extending the linear range of modulation, the contradiction between frequency stabilization and modulation should be coordinated properly. In addition, a compatible method between conventional telemetry channel and super fast signal telemetry channel is introduced. A satisfactory result has been acquired with those views and methods used in engineering application.

No description available.