Orientador: José Maria Campos dos Santos / Dissertação (mestrado profissional) - Universidade Estadual de Campinas, Faculdade de Engenharia Mecânica, Faculdade de Engenharia Eletrica e de Computação e Instituto de Química / Made available in DSpace on 2018-09-11T21:15:54Z (GMT). No. of bitstreams: 1 Pecula_MauroMiguel_M.pdf: 3399170 bytes, checksum: eb3730f4b592d4e1060f9a87cfd2bfe4 (MD5) Previous issue date: 2010 / Resumo: Os requisitos de qualidade sonora estão sendo cada vez mais utilizados no mercado de caminhões médios e pesados. Assim, proprietários de veículos sentem-se incomodados pelo ruído de engrenamento. O estudo do ruído de engrenamento neste trabalho baseia-se em um par engrenado de um motor diesel pesado de aplicação veicular. Como primeiro estudo foi calculado o erro de transmissão das engrenagens por meio das deformações dos dentes sob carga que conforme a literatura a sua amplitude de pico a pico está diretamente relacionada com o ruído de engrenamento. A verificação desta influência foi feita através de medições vibro - acústicas do motor em marcha lenta. Os dados calculados do erro de transmissão e dos sinais medidos foram confrontados obtendo-se convergência. Uma análise de qualidade sonora, por meio de teste de júri, foi realizada para verificar o impacto do ruído de engrenamento na qualidade sonora / Abstract: The requirements of sound quality are increasingly being used in medium and heavy trucks market. Then, owners of vehicles fell troubled by whine noise. The study of whine noise in this thesis is based in one geared pair of a heavy duty diesel engine for vehicular application. As a first approach the transmission error of the gears was calculated by the deformations of the teeth under load (compliance), according to literature, the transmission error peak to peak amplitude, had directly correlation with the whine noise. The proofing of this influence was performed through vibro-acoustics measurements of the engine in low idle. The calculated data of transmission error and processed measurements signals were confronted, obtaining convergence. A sound quality analysis, by juri test, was performed to verify the impact of the whine noise in sound quality / Mestrado / Dinâmica / Mestre em Engenharia Automobilistica

The purpose of this thesis is the construction of a test bench for the assessment of the NVH behaviour of a newly manufactured VW Polo 5. This will be done in collaboration with Volkswagen South Africa. Firstly, in order to gain a better understanding of the requirements such a test bench has to fulfill, the VW Polo, the guidelines prescribed by VW as well as the actual testing procedure implemented by VW Uitenhage will be analysed. Thereafter, the main section of the thesis will deal with the construction of the test bench. As agreed upon with Volkswagen Uitenhage, a test bench will be built during the course of the studies. This test bench will allow stimulation in low frequency as well as high frequency ranges and in addition to that, a second version of the test bench with optimised costing will be derived from the first one. The second model will only allow stimulation in high frequency ranges. During the thesis, a version of the test bench, the RTB-HC, has been developed which enables the stimulation of the high and low frequencies. In addition, a cost optimized version was developed. This version will be referred as RTB-LC. This version allows only a high frequency excitation.

The tractive force has to be interrupted during a gear-shifting operation in a manual vehicle transmission, leading into a decrease of speed while changing gears during the acceleration process. Therefore in a racing application, the shifting time has to be as short as possible so that the required performance of a racing car can be achieved. The following dissertation describes the development of a transmission control system to enable gear changes within a manual gearbox, which was designed for the Formula Student racing series. Various solutions were developed on the basis of reviewed literature, technical data of components and experiences of Formula Student teams. Following this, a comparison of the concepts by means of a utility analysis identified the pneumatic actuation of selector forks to be the most suitable concept. This was mainly due to the expected shifting time, the weight, and its advantageous energy supply requirement. After the selection of the actuators and the position sensors, the system was implemented into the drivetrain to check the tment and the technical feasibility. To draw conclusions regarding the shifting time and to prove the functionality of the system, an open test bench was constructed. Additionally, the hardware and software had to be developed to enable the test run. After the manufacturing and assembling of the test bench, the optimal settings for the test run were determined. By comparing the achieved shifting time of alternative solutions, an improvement in the driving performance of a Formula Student race car is probable.

Orientador: Milton Dias Junior / Dissertação (mestrado) - Universidade Estadual de Campinas, Faculdade de Engenharia Mecânica / Made available in DSpace on 2018-08-17T18:54:27Z (GMT). No. of bitstreams: 1 Miyasato_HugoHeidy_M.pdf: 3357683 bytes, checksum: 9fcd8bd237500580084498c606879165 (MD5) Previous issue date: 2011 / Resumo: Fenômenos de ruído, vibração e sua severidade (NVH) são uma grande preocupação da indústria automotiva desde o século 20. A fim de atingir uma vantagem competitiva, as montadoras têm se focado na melhora do desempenho de NVH dos seus produtos para lidar com um cenário de mercado global competitivo. No intuito de verificar o comportamento do sistema durante o processo de desenvolvimento, métodos computacionais são aplicados para encontrar melhores abordagens e na previsão de problemas, economizando tempo e orçamento da empresa gastos na construção de protótipos e testes. Nesse trabalho, gear rattle, um ruído induzido por impacto cuja causa são as engrenagens sem carga da transmissão, será modelado e simulado. É diagnosticado com maior intensidade em veículos com motores diesel em marcha lenta e excitado especificamente quando uma faixa de frequências que causa grande amplitude de vibração nos elementos internos da caixa de câmbio é alcançada. Modelos lineares do trem de potência em ponto morto ou em tração serão estudados, compreendendo as suas características básicas, tais como frequências naturais e modos associados que podem ser representativos do fenômeno. Esse sistema possui elementos com fortes não-linearidades, tais como a rigidez estratificada com histerese da embreagem e a folga entre os dentes dos engrenamentos. Uma caracterização mais realista será incluída no modelo com uma rigidez variante no tempo para o engrenamento helicoidal, utilizado em todas transmissões manuais, com uma componente dissipativa adequada aos impactos. Para verificar condições de operação que podem somente ser avaliadas segundo formulação não-linear, simulações serão realizadas para verificar a eficácia de orientações de solução e propostas de modificação encontradas na literatura / Abstract: Noise, Vibration and Harshness (NVH) phenomena are a great concern of the automotive industry since the twentieth century. In order to achieve a commercial advantage, manufacturers have focused on improving the NVH performance of their products to cope with a competitive global market scenario. To verify the behavior of the system during the design process, computational methods are applied to find a better approach and foresee problems, saving company budget and time spent in prototypes and tests. In this work, gear rattle, a impact-induced noise caused by the unloaded gear teeth inside the gearbox, will be modeled and simulated. It is diagnosed with a higher intensity in diesel vehicle engines at idle speed and in a more specific way excited when a range of frequency that causes large amplitude of vibration in the internal elements of the gearbox is reached. Linear models of the powertrain operating in idle and traction will be studied, in order to understand its basic characteristics, such as natural frequencies and associated vibration modes that could be representative to this phenomena. This system has elements with strong nonlinearities such as the stratified stiffness with hysteresis of the clutch and the backlash between the gear teeth. A more realistic feature will be included in the model with a time variable stiffness for the helical gear mesh, used in all manual transmissions, with a suitable dissipative component for the impacts. To verify operational conditions which can only be evaluated with nonlinear formulation, simulations will be made to verify the effectiveness of solution guidelines and modification procedures found in literature / Mestrado / Mecanica dos Sólidos e Projeto Mecanico / Mestre em Engenharia Mecânica

Orientador: Milton Dias Junior / Dissertação (mestrado) - Universidade Estadual de Campinas, Faculdade de Engenharia Mecânica / Made available in DSpace on 2018-08-22T19:22:01Z (GMT). No. of bitstreams: 1 RoldaoPerestrelo_LeandroTadeu_M.pdf: 15158370 bytes, checksum: 84a10bb14b3381b619db8ff9bb97be9c (MD5) Previous issue date: 2013 / Resumo: O resumo poderá ser visualizado no texto completo da tese digital / Abstract: The abstract is available with the full electronic document / Mestrado / Mecanica dos Sólidos e Projeto Mecanico / Mestre em Engenharia Mecânica